The operand flag word for ISD::INLINEASM nodes now contains a 15-bit
memory constraint ID when the operand kind is Kind_Mem. This constraint
ID is a numeric equivalent to the constraint code string and is converted
with a target specific hook in TargetLowering.
This patch maps all memory constraints to InlineAsm::Constraint_m so there
is no functional change at this point. It just proves that using these
previously unused bits in the encoding of the flag word doesn't break
anything.
The next patch will make each target preserve the current mapping of
everything to Constraint_m for itself while changing the target independent
implementation of the hook to return Constraint_Unknown appropriately. Each
target will then be adapted in separate patches to use appropriate
Constraint_* values.
PR22883 was caused the matching operands copying the whole of the operand flags
for the matched operand. This included the constraint id which needed to be
replaced with the operand number. This has been fixed with a conversion
function. Following on from this, matching operands also used the operand
number as the constraint id. This has been fixed by looking up the matched
operand and taking it from there.
llvm-svn: 232165
%Q5_Q6<def> = COPY %Q2_Q3
%D5<def> =
%D3<def> =
%D3<def> = COPY %D6 // Incorrectly removed in MachineCopyPropagation
Using of %D3 results in incorrect result ...
Reviewed in http://reviews.llvm.org/D8242
llvm-svn: 232142
This should complete the job started in r231794 and continued in r232045:
We want to replace as much custom x86 shuffling via intrinsics
as possible because pushing the code down the generic shuffle
optimization path allows for better codegen and less complexity
in LLVM.
AVX2 introduced proper integer variants of the hacked integer insert/extract
C intrinsics that were created for this same functionality with AVX1.
This should complete the removal of insert/extract128 intrinsics.
The Clang precursor patch for this change was checked in at r232109.
llvm-svn: 232120
This (r232027) has caused PR22883; so it seems those bits might be used by
something else after all. Reverting until we can figure out what else to do.
Original commit message:
The operand flag word for ISD::INLINEASM nodes now contains a 15-bit
memory constraint ID when the operand kind is Kind_Mem. This constraint
ID is a numeric equivalent to the constraint code string and is converted
with a target specific hook in TargetLowering.
This patch maps all memory constraints to InlineAsm::Constraint_m so there
is no functional change at this point. It just proves that using these
previously unused bits in the encoding of the flag word doesn't break anything.
The next patch will make each target preserve the current mapping of
everything to Constraint_m for itself while changing the target independent
implementation of the hook to return Constraint_Unknown appropriately. Each
target will then be adapted in separate patches to use appropriate Constraint_*
values.
llvm-svn: 232093
Now that we've replaced the vinsertf128 intrinsics,
do the same for their extract twins.
This is very much like D8086 (checked in at r231794):
We want to replace as much custom x86 shuffling via intrinsics
as possible because pushing the code down the generic shuffle
optimization path allows for better codegen and less complexity
in LLVM.
This is also the LLVM sibling to the cfe D8275 patch.
Differential Revision: http://reviews.llvm.org/D8276
llvm-svn: 232045
Summary:
The operand flag word for ISD::INLINEASM nodes now contains a 15-bit
memory constraint ID when the operand kind is Kind_Mem. This constraint
ID is a numeric equivalent to the constraint code string and is converted
with a target specific hook in TargetLowering.
This patch maps all memory constraints to InlineAsm::Constraint_m so there
is no functional change at this point. It just proves that using these
previously unused bits in the encoding of the flag word doesn't break anything.
The next patch will make each target preserve the current mapping of
everything to Constraint_m for itself while changing the target independent
implementation of the hook to return Constraint_Unknown appropriately. Each
target will then be adapted in separate patches to use appropriate Constraint_*
values.
Reviewers: hfinkel
Reviewed By: hfinkel
Subscribers: hfinkel, jholewinski, llvm-commits
Differential Revision: http://reviews.llvm.org/D8171
llvm-svn: 232027
These docs *don't* match the way WinEHPrepare uses them yet, and
verifier support isn't implemented either. The implementation will come
after the documentation text is reviewed and agreed upon.
llvm-svn: 232003
Instead, run both EH preparation passes, and have them both ignore
functions with unrecognized EH personalities. Pass delegation involved
some hacky code for creating an AnalysisResolver that we don't need now.
llvm-svn: 231995
Summary:
I don't know why every singled backend had to redeclare its own DataLayout.
There was a virtual getDataLayout() on the common base TargetMachine, the
default implementation returned nullptr. It was not clear from this that
we could assume at call site that a DataLayout will be available with
each Target.
Now getDataLayout() is no longer virtual and return a pointer to the
DataLayout member of the common base TargetMachine. I plan to turn it into
a reference in a future patch.
The only backend that didn't have a DataLayout previsouly was the CPPBackend.
It now initializes the default DataLayout. This commit is NFC for all the
other backends.
Test Plan: clang+llvm ninja check-all
Reviewers: echristo
Subscribers: jfb, jholewinski, llvm-commits
Differential Revision: http://reviews.llvm.org/D8243
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 231987
CodeGen incorrectly ignores (assert from APInt) constant index bigger
than 2^64 in getelementptr instruction. This is a test and fix for that.
Patch by Paweł Bylica!
Reviewed By: rnk
Subscribers: majnemer, rnk, mcrosier, resistor, llvm-commits
Differential Revision: http://reviews.llvm.org/D8219
llvm-svn: 231984
that control, individually, all of the disparate things it was
controlling.
At the same time move a FIXME in the Hexagon port to a new
subtarget function that will enable a user of the machine
scheduler to avoid using the source scheduler for pre-RA-scheduling.
The FIXME would have this removed, but involves either testcase
changes or adding -pre-RA-sched=source to a few testcases.
llvm-svn: 231980
If a function is going in an unique section (because of -ffunction-sections
for example), putting a jump table in .rodata will keep .rodata alive and
that will keep alive any other function that also has a jump table.
Instead, put the jump table in a unique section that is associated with the
function.
llvm-svn: 231961
There are still 4 tests that check for DW_AT_MIPS_linkage_name,
because they specify DWARF 2 or 3 in the module metadata. So, I didn't
create an explicit version-based test for the attribute.
Differential Revision: http://reviews.llvm.org/D8227
llvm-svn: 231880
This lets us pass the symbol to the constructor and avoid the mutable field.
This also opens the way for outputting the symbol only when needed, instead
of outputting them at the start of the file.
llvm-svn: 231859
- Use TargetLowering to check for the actual cost of each extension.
- Provide a factorized method to check for the cost of an extension:
TargetLowering::isExtFree.
- Provide a virtual method TargetLowering::isExtFreeImpl for targets to be able
to tune the cost of non-free extensions.
This refactoring offers a better granularity to model what really happens on
different targets.
No performance changes and very few code differences.
Part of <rdar://problem/19267165>
llvm-svn: 231855
Follow up from r231505.
Fix the non-determinism by using a MapVector and reintroduce the AArch64
testcase. Defer deleting the got candidates up to the end and remove
them in a bulk, avoiding linear time removal of each element.
Thanks to Renato Golin for trying it out on other platforms.
llvm-svn: 231830
This makes code that uses section relative expressions (debug info) simpler and
less brittle.
This is still a bit awkward as the symbol is created late and has to be
stored in a mutable field.
I will move the symbol creation earlier in the next patch.
llvm-svn: 231802
Also it extracts getCopyFromRegs helper function in SelectionDAGBuilder as we need to be able to customize type of the register exported from basic block during lowering of the gc.result.
(Resubmitting this change after not being able to reproduce buildbot failure)
Differential Revision: http://reviews.llvm.org/D7760
llvm-svn: 231800
When tail merging it may be necessary to remove MMOs from memory operations to
ensures later passes (e.g., MI sched) conservatively compute dependencies.
Currently, we only remove the MMO from the common tail if the MMO doesn't match
with the relative instruction in the non-common tail(s).
A more robust solution would be to add multiple MMOs from the duplicate MIs to
the new MI. Currently ScheduleDAGInstrs.cpp ignores all MMOs on instructions
with multiple MMOs, so this solution is equivalent for the time being.
No test case included as this is incredibly difficult to reproduce.
Patch was a collaborative effort between Ana Pazos and myself.
Phabricator: http://reviews.llvm.org/D7769
llvm-svn: 231799
We want to replace as much custom x86 shuffling via intrinsics
as possible because pushing the code down the generic shuffle
optimization path allows for better codegen and less complexity
in LLVM.
This is the sibling patch for the Clang half of this change:
http://reviews.llvm.org/D8088
Differential Revision: http://reviews.llvm.org/D8086
llvm-svn: 231794
Summary:
This is part of the work to support memory constraints that behave
differently to 'm'. The subsequent patches will expand on the existing
encoding (which is a 32-bit int) and as a result in some flag words will no
longer fit into an i16. This problem only affected the MSP430 target which
appears to have 16-bit pointers.
Reviewers: hfinkel
Reviewed By: hfinkel
Subscribers: hfinkel, llvm-commits
Differential Revision: http://reviews.llvm.org/D8168
llvm-svn: 231783
When referring to a symbol in a dwarf section on ELF we should use
.long foo
instead of
.long foo - .debug_something
because ELF is unaware of the content of the sections and therefore needs
relocations. This has nothing to do with optimizing a -0.
llvm-svn: 231751
They mark the start of a compile unit, so name them .Lcu_*. Using
Section->getLabelBeginName() makes it looks like they mark the start of the
section.
While at it, switch to createTempSymbol to avoid collisions with labels
created in inline assembly. Not sure if a "don't crash" test is worth it.
With this getLabelBeginName is dead, delete it.
llvm-svn: 231750
Last commit fixed the handling of hash collisions, but it introdcuced
unneeded bucket terminators in some places. The generated table was
correct, it can just be a tiny bit smaller. As the previous table was
correct, the test doesn't need updating. If we really wanted to test
this, I could add the section size to the dwarf dump and test for a
precise value there. IMO the correctness test is sufficient.
llvm-svn: 231748
Summary:
Now that the DataLayout is a mandatory part of the module, let's start
cleaning the codebase. This patch is a first attempt at doing that.
This patch is not exactly NFC as for instance some places were passing
a nullptr instead of the DataLayout, possibly just because there was a
default value on the DataLayout argument to many functions in the API.
Even though it is not purely NFC, there is no change in the
validation.
I turned as many pointer to DataLayout to references, this helped
figuring out all the places where a nullptr could come up.
I had initially a local version of this patch broken into over 30
independant, commits but some later commit were cleaning the API and
touching part of the code modified in the previous commits, so it
seemed cleaner without the intermediate state.
Test Plan:
Reviewers: echristo
Subscribers: llvm-commits
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 231740
It turns out accelerator tables where totally broken if they contained
entries with colliding hashes. The failure mode is pretty bad, as it not
only impacted the colliding entries, but would basically make all the
entries after the first hash collision pointing in the wrong place.
The testcase uses the symbol names that where found to collide during a
clang build.
From a performance point of view, the patch adds a sort and a linear
walk over each bucket contents. While it has a measurable impact on the
accelerator table emission, it's not showing up significantly in clang
profiles (and I'd argue that correctness is priceless :-)).
llvm-svn: 231732
This fixes a subtle issue that was introduced in r205153.
When reusing a store for the extractelement expansion (to load directly
from it, inserting of going through the stack), later stores to the
same location might have overwritten the data we were expecting to
extract from.
To fix that, we need to explicitly replace the chain going out of the
reused store, so that later stores also have an explicit dependency on
the generated element-extracting loads, and can't clobber them.
rdar://20066785
Differential Revision: http://reviews.llvm.org/D8180
llvm-svn: 231721
Fix the double-deletion of AnalysisResolver when delegating through to
Dwarf EH preparation by creating one from scratch. Hopefully the new
pass manager simplifies this.
This reverts commit r229952.
llvm-svn: 231719
I have a test for that issue, but I didn't include it in the commit as it's
a 200KB file for a pretty minor issue. (The reason the file is so big is
that it needs > 1024 variables/functions to trigger and that with debug
information.
The issue/fix on the other side is totally trivial. If poeple want the test
commited, I can do that. It just didn't seem worth it to me.
llvm-svn: 231701
In the case where just tables are part of the function section, this produces
more readable assembly by avoiding switching to the eh section and back
to .text.
This would also break with non unique section names, as trying to switch to
a unique section actually creates a new one.
llvm-svn: 231677
We have an increasing number of cases where we are creating commuted shuffle masks - all implementing nearly the same code.
This patch adds a static helper function - ShuffleVectorSDNode::commuteMask() and replaces a number of cases to use it.
Differential Revision: http://reviews.llvm.org/D8139
llvm-svn: 231581
In theory this allows the compiler to skip materializing the array on
the stack. In practice clang often fails to do that, but that's a
different story. NFC.
llvm-svn: 231571
This patch fixes the logic in the DAGCombiner that folds an AND node according
to rule: (and (X (load V)), C) -> (X (load V))
An AND between a vector load 'X' and a constant build_vector 'C' can be folded
into the load itself only if we can prove that the AND operation is redundant.
The algorithm implemented by 'visitAND' firstly computes the splat value 'S'
from C, and then checks if S has the lower 'B' bits set (where B is the size in
bits of the vector element type). The algorithm takes into account also the
'undef' bits in the splat mask.
Unfortunately, the algorithm only worked under the assumption that the size of S
is a multiple of the vector element type. With this patch, we conservatively
avoid folding the AND if the splat bits are not compatible with the vector
element type.
Added X86 test and-load-fold.ll
Differential Revision: http://reviews.llvm.org/D8085
llvm-svn: 231563
This patch attempts to convert a SCALAR_TO_VECTOR using an operand from an EXTRACT_VECTOR_ELT into a VECTOR_SHUFFLE.
This prevents many cases of spilling scalar data between the gpr + simd registers.
At present the optimization only accepts cases where there is no TRUNC of the scalar type (i.e. all types must match).
Differential Revision: http://reviews.llvm.org/D8132
llvm-svn: 231554
This is based on the following equivalences:
select(C0 & C1, X, Y) <=> select(C0, select(C1, X, Y), Y)
select(C0 | C1, X, Y) <=> select(C0, X, select(C1, X, Y))
Many target cannot perform and/or on the CPU flags and therefore the
right side should be choosen to avoid materializign the i1 flags in an
integer register. If the target can perform this operation efficiently
we normalize to the left form.
Differential Revision: http://reviews.llvm.org/D7622
llvm-svn: 231507
This is in preparation for changing visitSELECT to normalize towards
select(Cond0, select(Cond1, X, Y), Y);
select(Cond0, X, select(Cond1, X, Y)) which perfom an implicit and/or of
the conditions.
The factored function contains all DAGCombine rules which reduce two values
combined by an And/Or operation to a single value. This does not include rules
involving constants as visitSELECT already handles that case.
Differential Revision: http://reviews.llvm.org/D8026
llvm-svn: 231506
Add MachO 32-bit (i.e. arm and x86) support for replacing global GOT equivalent
symbol accesses. Unlike 64-bit targets, there's no GOTPCREL relocation, and
access through a non_lazy_symbol_pointers section is used instead.
-- before
_extgotequiv:
.long _extfoo
_delta:
.long _extgotequiv-_delta
-- after
_delta:
.long L_extfoo$non_lazy_ptr-_delta
.section __IMPORT,__pointers,non_lazy_symbol_pointers
L_extfoo$non_lazy_ptr:
.indirect_symbol _extfoo
.long 0
llvm-svn: 231475
Follow up r230264 and add ARM64 support for replacing global GOT
equivalent symbol accesses by references to the GOT entry for the final
symbol instead, example:
-- before
.globl _foo
_foo:
.long 42
.globl _gotequivalent
_gotequivalent:
.quad _foo
.globl _delta
_delta:
.long _gotequivalent-_delta
-- after
.globl _foo
_foo:
.long 42
.globl _delta
Ltmp3:
.long _foo@GOT-Ltmp3
llvm-svn: 231474
Currently shuffles may only be combined if they are of the same type, despite the fact that bitcasts are often introduced in between shuffle nodes (e.g. x86 shuffle type widening).
This patch allows a single input shuffle to peek through bitcasts and if the input is another shuffle will merge them, shuffling using the smallest sized type, and re-applying the bitcasts at the inputs and output instead.
Dropped old ShuffleToZext test - this patch removes the use of the zext and vector-zext.ll covers these anyhow.
Differential Revision: http://reviews.llvm.org/D7939
llvm-svn: 231380
Added lowering for ISD::CONCAT_VECTORS and ISD::INSERT_SUBVECTOR for i1 vectors,
it is needed to pass all masked_memop.ll tests for SKX.
llvm-svn: 231371
Also it extracts getCopyFromRegs helper function in SelectionDAGBuilder as we need to be able to customize type of the register exported from basic block during lowering of the gc.result.
llvm-svn: 231366
Build time (user time) for building llvm+clang+lldb in release mode:
- default allocator: 9086 seconds
- with PBQP: 9126 seconds
- with PBQP + local bit matrix cache: 9097 seconds
llvm-svn: 231360
already been added and the inconsistency made choosing names and
changing code more annoying. Plus, wow are they better for this code!
llvm-svn: 231347
result reasonable.
This code predated clang-format and so there was a reasonable amount of
crufty formatting that had accumulated. This should ensure that neither
myself nor others end up with formatting-only changes sneaking into
other fixes.
llvm-svn: 231341
just arbitrarily interleaving unrelated control flows once they get
moved "out-of-line" (both outside of natural CFG ordering and with
diamonds that cannot be fully laid out by chaining fallthrough edges).
This easy solution doesn't work in practice, and it isn't just a small
bug. It looks like a very different strategy will be required. I'm
working on that now, and it'll again go behind some flag so that
everyone can experiment and make sure it is working well for them.
llvm-svn: 231332
To be used/tested by llvm-dsymutil. (llvm-dsymutil does a 'static' link,
no need for relocations for most things, so it'll just emit raw integers
for most attributes)
llvm-svn: 231298
Summary:
DataLayout keeps the string used for its creation.
As a side effect it is no longer needed in the Module.
This is "almost" NFC, the string is no longer
canonicalized, you can't rely on two "equals" DataLayout
having the same string returned by getStringRepresentation().
Get rid of DataLayoutPass: the DataLayout is in the Module
The DataLayout is "per-module", let's enforce this by not
duplicating it more than necessary.
One more step toward non-optionality of the DataLayout in the
module.
Make DataLayout Non-Optional in the Module
Module->getDataLayout() will never returns nullptr anymore.
Reviewers: echristo
Subscribers: resistor, llvm-commits, jholewinski
Differential Revision: http://reviews.llvm.org/D7992
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 231270
Summary:
In PNaCl, most atomic instructions have their own @llvm.nacl.atomic.* function, each one, with a few exceptions, represents a consistent behaviour across all NaCl-supported targets. Unfortunately, the atomic RMW operations nand, [u]min, and [u]max aren't directly represented by any such @llvm.nacl.atomic.* function. This patch refines shouldExpandAtomicRMWInIR in TargetLowering so that a future `Le32TargetLowering` class can selectively inform the caller how the target desires the atomic RMW instruction to be expanded (ie via load-linked/store-conditional for ARM/AArch64, via cmpxchg for X86/others?, or not at all for Mips) if at all.
This does not represent a behavioural change and as such no tests were added.
Patch by: Richard Diamond.
Reviewers: jfb
Reviewed By: jfb
Subscribers: jfb, aemerson, t.p.northover, llvm-commits
Differential Revision: http://reviews.llvm.org/D7713
llvm-svn: 231250
a flag for now.
First off, thanks to Daniel Jasper for really pointing out the issue
here. It's been here forever (at least, I think it was there when
I first wrote this code) without getting really noticed or fixed.
The key problem is what happens when two reasonably common patterns
happen at the same time: we outline multiple cold regions of code, and
those regions in turn have diamonds or other CFGs for which we can't
just topologically lay them out. Consider some C code that looks like:
if (a1()) { if (b1()) c1(); else d1(); f1(); }
if (a2()) { if (b2()) c2(); else d2(); f2(); }
done();
Now consider the case where a1() and a2() are unlikely to be true. In
that case, we might lay out the first part of the function like:
a1, a2, done;
And then we will be out of successors in which to build the chain. We go
to find the best block to continue the chain with, which is perfectly
reasonable here, and find "b1" let's say. Laying out successors gets us
to:
a1, a2, done; b1, c1;
At this point, we will refuse to lay out the successor to c1 (f1)
because there are still un-placed predecessors of f1 and we want to try
to preserve the CFG structure. So we go get the next best block, d1.
... wait for it ...
Except that the next best block *isn't* d1. It is b2! d1 is waaay down
inside these conditionals. It is much less important than b2. Except
that this is exactly what we didn't want. If we keep going we get the
entire set of the rest of the CFG *interleaved*!!!
a1, a2, done; b1, c1; b2, c2; d1, f1; d2, f2;
So we clearly need a better strategy here. =] My current favorite
strategy is to actually try to place the block whose predecessor is
closest. This very simply ensures that we unwind these kinds of CFGs the
way that is natural and fitting, and should minimize the number of cache
lines instructions are spread across.
It also happens to be *dead simple*. It's like the datastructure was
specifically set up for this use case or something. We only push blocks
onto the work list when the last predecessor for them is placed into the
chain. So the back of the worklist *is* the nearest next block.
Unfortunately, a change like this is going to cause *soooo* many
benchmarks to swing wildly. So for now I'm adding this under a flag so
that we and others can validate that this is fixing the problems
described, that it seems possible to enable, and hopefully that it fixes
more of our problems long term.
llvm-svn: 231238
In a CFG with the edges A->B->C and A->C, B is an optional branch.
LLVM's default behavior is to lay the blocks out naturally, i.e. A, B,
C, in order to improve code locality and fallthroughs. However, if a
function contains many of those optional branches only a few of which
are taken, this leads to a lot of unnecessary icache misses. Moving B
out of line can work around this.
Review: http://reviews.llvm.org/D7719
llvm-svn: 231230
When trying to convert a BUILD_VECTOR into a shuffle, we try to split a single source vector that is twice as wide as the destination vector.
We can not do this when we also need the zero vector to create a blend.
This fixes PR22774.
Differential Revision: http://reviews.llvm.org/D8040
llvm-svn: 231219
(They are called emitDwarfDIE and emitDwarfAbbrevs in their new home)
llvm-dsymutil wants to reuse that code, but it doesn't have a DwarfUnit or
a DwarfDebug object to call those. It has access to an AsmPrinter though.
Having emitDIE in the AsmPrinter also removes the DwarfFile dependency
on DwarfDebug, and thus the patch drops that field.
Differential Revision: http://reviews.llvm.org/D8024
llvm-svn: 231210
GCC 4.7's libstdc++ doesn't have std::map::emplace, but it does have
std::unordered_map::emplace, and the use case here doesn't appear to
need ordering. The container has been changed in a separate/precursor
patch, and now this patch should hopefully build cleanly even with
GCC 4.7.
& then I realized the order of the container did matter, so extra
handling of ordering was added in r231189.
Original commit message:
This makes LiveRange non-copyable, and LiveInterval is already
non-movable (due to the explicit dtor), so now it's non-copyable and
non-movable.
Fix the one case where we were relying on the (deprecated in C++11)
implicit copy ctor of LiveInterval (which happened to work because the
ctor created an object with a null segmentSet, so double-deleting the
null pointer was fine).
llvm-svn: 231192
The order of this container was needed at one point - so, at that point
create a temporary array of pointers, sort those, then iterate them.
This keeps lookup efficient (& the lesser issue, of allowing the use of
emplace... ), object identity preserved, and ordered iteration in the
one place that requires it.
While this has no functional change, I realize it does mean allocating
an extra data structure and performing a sort - so if this looks suspect
to anyone regarding perf characteristics, I'm all ears.
llvm-svn: 231189
There is a known bug where the register coalescer fails to merge
subranges when multiple ranges end up in the "overflow" bit 32 of the
lanemasks. A proper fix for this is complicated so for now this is a
workaround which lets the register coalescer drop the subregister
liveness information (we just loose some precision by that) and
continue.
llvm-svn: 231186
Apparently something does care about ordering of LiveIntervals... so
revert all that stuff (r231175, r231176, r231177) & take some time to
re-evaluate.
llvm-svn: 231184
GCC 4.7's libstdc++ doesn't have std::map::emplace, but it does have
std::unordered_map::emplace, and the use case here doesn't appear to
need ordering. The container has been changed in a separate/precursor
patch, and now this patch should hopefully build cleanly even with
GCC 4.7.
Original commit message:
This makes LiveRange non-copyable, and LiveInterval is already
non-movable (due to the explicit dtor), so now it's non-copyable and
non-movable.
Fix the one case where we were relying on the (deprecated in C++11)
implicit copy ctor of LiveInterval (which happened to work because the
ctor created an object with a null segmentSet, so double-deleting the
null pointer was fine).
llvm-svn: 231176
This makes LiveRange non-copyable, and LiveInterval is already
non-movable (due to the explicit dtor), so now it's non-copyable and
non-movable.
Fix the one case where we were relying on the (deprecated in C++11)
implicit copy ctor of LiveInterval (which happened to work because the
ctor created an object with a null segmentSet, so double-deleting the
null pointer was fine).
llvm-svn: 231168
Ultimately, we'll need to leave something behind to indicate which
alloca will hold the exception, but we can figure that out when it comes
time to emit the __CxxFrameHandler3 catch handler table.
llvm-svn: 231164
From:
int M, total;
void foo() {
int i;
for (i = 0; i < M; i++) {
total = total + i / 2;
}
}
This is the kernel loop:
.LBB0_2: # %for.body
=>This Inner Loop Header: Depth=1
movl %edx, %esi
movl %ecx, %edx
shrl $31, %edx
addl %ecx, %edx
sarl %edx
addl %esi, %edx
incl %ecx
cmpl %eax, %ecx
jl .LBB0_2
--------------------------
The first mov insn "movl %edx, %esi" could be removed if we change "addl %esi, %edx" to "addl %edx, %esi".
The IR before TwoAddressInstructionPass is:
BB#2: derived from LLVM BB %for.body
Predecessors according to CFG: BB#1 BB#2
%vreg3<def> = COPY %vreg12<kill>; GR32:%vreg3,%vreg12
%vreg2<def> = COPY %vreg11<kill>; GR32:%vreg2,%vreg11
%vreg7<def,tied1> = SHR32ri %vreg3<tied0>, 31, %EFLAGS<imp-def,dead>; GR32:%vreg7,%vreg3
%vreg8<def,tied1> = ADD32rr %vreg3<tied0>, %vreg7<kill>, %EFLAGS<imp-def,dead>; GR32:%vreg8,%vreg3,%vreg7
%vreg9<def,tied1> = SAR32r1 %vreg8<kill,tied0>, %EFLAGS<imp-def,dead>; GR32:%vreg9,%vreg8
%vreg4<def,tied1> = ADD32rr %vreg9<kill,tied0>, %vreg2<kill>, %EFLAGS<imp-def,dead>; GR32:%vreg4,%vreg9,%vreg2
%vreg5<def,tied1> = INC64_32r %vreg3<kill,tied0>, %EFLAGS<imp-def,dead>; GR32:%vreg5,%vreg3
CMP32rr %vreg5, %vreg0, %EFLAGS<imp-def>; GR32:%vreg5,%vreg0
%vreg11<def> = COPY %vreg4; GR32:%vreg11,%vreg4
%vreg12<def> = COPY %vreg5<kill>; GR32:%vreg12,%vreg5
JL_4 <BB#2>, %EFLAGS<imp-use,kill>
Now TwoAddressInstructionPass will choose vreg9 to be tied with vreg4. However, it doesn't see that there is copy from vreg4 to vreg11 and another copy from vreg11 to vreg2 inside the loop body. To remove those copies, it is necessary to choose vreg2 to be tied with vreg4 instead of vreg9. This code pattern commonly appears when there is reduction operation in a loop.
So check for a reversed copy chain and if we encounter one then we can commute the add instruction so we can avoid a copy.
Patch by Wei Mi.
http://reviews.llvm.org/D7806
llvm-svn: 231148
Accidentally committed a few more of these cleanup changes than
intended. Still breaking these out & tidying them up.
This reverts commit r231135.
llvm-svn: 231136
There doesn't seem to be any need to assert that iterator assignment is
between iterators over the same node - if you want to reuse an iterator
variable to iterate another node, that's perfectly acceptable. Just
don't mix comparisons between iterators into disjoint sequences, as
usual.
llvm-svn: 231135
This type could be made copyable (= default a protected copy ctor in the
base class, and preferably make the derived class final to avoid risks
of providing a slicing copy operation to further derived classes) but it
seemed easier to avoid that complexity for a dump function that I assume
(by symmetry with ResourcePriorityQueue's dump, which was actively
buggy) not often used.
llvm-svn: 231133
frame register before checking if there is a DWARF register number for it.
Thanks to H.J. Lu for diagnosing this and providing the testcase!
llvm-svn: 231121
The cause of the issue is the interaction of two factors:
1) When generating a DW_TAG_imported_declaration DIE which imports another
imported declaration, the code in AsmPrinter/DwarfCompileUnit.cpp
asserts that the second imported declaration must already have a DIE.
2) There is a non-determinism in the order in which imported declarations
within the same scope are processed.
Because of the non-determinism (2), it is possible that an imported
declaration is processed before another one it depends on, breaking the
assumption in (1).
The source of the non-determinism is that the imported declaration
DIDescriptors are sorted by scope in DwarfDebug::beginModule(); however that
sort is not a stable_sort, therefore the order of the declarations within
the same scope is not preserved. The attached patch changes the std::sort to
a std::stable_sort and it fixes the problem.
Test omitted due to it being non-deterministic and depending on the
implementation of std::sort.
llvm-svn: 231100
This prevents the behavior observed in llvm.org/PR22369. I am not sure
whether I am reading the code correctly, but the early exit based on
isLiveOutPastPHIs() seems to make the wrong assumption that
RegisterCoalescer won't be able to coalesce those copies later.
This change hides the new behavior behind -no-phi-elim-live-out-early-exit
as it currently breaks four tests:
* Assertion in:
CodeGen/Hexagon/hwloop-cleanup.ll
* Worse code in:
CodeGen/X86/coalescer-commute4.ll
CodeGen/X86/phys_subreg_coalesce-2.ll
CodeGen/X86/zlib-longest-match.ll
The root cause here seems to be that the heuristic that determines
the visitation order in RegisterCoalescer gets less lucky.
llvm-svn: 231064
TargetRegisterInfo. DebugLocEntry now holds a buffer with the raw bytes
of the pre-calculated DWARF expression.
Ought to be NFC, but it does slightly alter the output format of the
textual assembly.
This reapplies 230930 without the assertion in DebugLocEntry::finalize()
because not all Machine registers can be lowered into DWARF register
numbers and floating point constants cannot be expressed.
llvm-svn: 231023
TargetRegisterInfo. DebugLocEntry now holds a buffer with the raw bytes
of the pre-calculated DWARF expression.
Ought to be NFC, but it does slightly alter the output format of the
textual assembly.
This reapplies 230930 with a relaxed assertion in DebugLocEntry::finalize()
that allows for empty DWARF expressions for constant FP values.
llvm-svn: 230975
TargetRegisterInfo. DebugLocEntry now holds a buffer with the raw bytes
of the pre-calculated DWARF expression.
Ought to be NFC, but it does slightly alter the output format of the
textual assembly.
llvm-svn: 230930
Such edges are zero matrix, and they bring no additional info to the
allocation problem, apart from contributing to nodes' degree. Removing
those edges is expected to improve allocation time.
Tune the spill cost comparison, as this gives better average performances
now that the nodes' degrees has changed.
llvm-svn: 230904
We were missing a check for the following fold in DAGCombiner:
// fold (fmul (fmul x, c1), c2) -> (fmul x, (fmul c1, c2))
If 'x' is also a constant, then we shouldn't do anything. Otherwise, we could end up swapping the operands back and forth forever.
This should fix:
http://llvm.org/bugs/show_bug.cgi?id=22698
Differential Revision: http://reviews.llvm.org/D7917
llvm-svn: 230884
Level 1 should abort for all instructions but call/terminators/args.
Instead it was aborting only if the level was > 2
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 230861
All of the cases were just appending from random access iterators to a
vector. Using insert/append can grow the vector to the perfect size
directly and moves the growing out of the loop. No intended functionalty
change.
llvm-svn: 230845
This work is currently being rethought along different lines and
if this work is needed it can be resurrected out of svn. Remove it
for now as no current work in ongoing on it and it's unused. Verified
with the authors before removal.
llvm-svn: 230780
Summary:
Currently fast-isel-abort will only abort for regular instructions,
and just warn for function calls, terminators, function arguments.
There is already fast-isel-abort-args but nothing for calls and
terminators.
This change turns the fast-isel-abort options into an integer option,
so that multiple levels of strictness can be defined.
This will help no being surprised when the "abort" option indeed does
not abort, and enables the possibility to write test that verifies
that no intrinsics are forgotten by fast-isel.
Reviewers: resistor, echristo
Subscribers: jfb, llvm-commits
Differential Revision: http://reviews.llvm.org/D7941
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 230775
This removes a bit of duplicated code and more importantly, remembers the
labels so that they don't need to be looked up by name.
This in turn allows for any name to be used and avoids a crash if the name
we wanted was already taken.
llvm-svn: 230772
that is iterating over it
Inserting elements into a `DenseMap` invalidated iterators pointing
into the `DenseMap` instance.
Differential Revision: http://reviews.llvm.org/D7924
llvm-svn: 230719
uses of TM->getSubtargetImpl and propagate to all calls.
This could be a debugging regression in places where we had a
TargetMachine and/or MachineFunction but don't have it as part
of the MachineInstr. Fixing this would require passing a
MachineFunction/Function down through the print operator, but
none of the existing uses in tree seem to do this.
llvm-svn: 230710
a lookup, pass that in rather than use a naked call to getSubtargetImpl.
This involved passing down and around either a TargetMachine or
TargetRegisterInfo. Update all callers/definitions around the targets
and SelectionDAG.
llvm-svn: 230699
have the debugger step through each one individually. Turn off the
combine for adjacent stores at -O0 so we get this behavior.
Possibly, DAGCombine shouldn't run at all at -O0, but that's for
another day; see PR22346.
Differential Revision: http://reviews.llvm.org/D7181
llvm-svn: 230659
This required plumbing a TargetRegisterInfo through computeRegisterProperties
and into findRepresentativeClass which uses it for register class
iteration. This required passing a subtarget into a few target specific
initializations of TargetLowering.
llvm-svn: 230583
the .h file. It's used in only one place (other than recursively)
and there's no need to include it everywhere.
Saves almost 900k from total llvm object file size.
llvm-svn: 230561
This patch unifies the comdat and non-comdat code paths. By doing this
it add missing features to the comdat side and removes the fixed
section assumptions from the non-comdat side.
In ELF there is no one true section for "4 byte mergeable" constants.
We are better off computing the required properties of the section
and asking the context for it.
llvm-svn: 230411
There is no need to open-code the alignment calculation, we have a
handy RoundUpToAlignment function which "Does The Right Thing (TM)".
llvm-svn: 230392
Author: Simon Pilgrim <llvm-dev@redking.me.uk>
Date: Mon Feb 23 23:04:28 2015 +0000
Fix based on post-commit comment on D7816 & rL230177 - BUILD_VECTOR operand truncation was using the the BV's output scalar type instead of the input type.
and
Author: Simon Pilgrim <llvm-dev@redking.me.uk>
Date: Sun Feb 22 18:17:28 2015 +0000
[DagCombiner] Generalized BuildVector Vector Concatenation
The CONCAT_VECTORS combiner pass can transform the concat of two BUILD_VECTOR nodes into a single BUILD_VECTOR node.
This patch generalises this to support any number of BUILD_VECTOR nodes, and also permits UNDEF nodes to be included as well.
This was noticed as AVX vec128 -> vec256 canonicalization sometimes creates a CONCAT_VECTOR with a real vec128 lower and an vec128 UNDEF upper.
Differential Revision: http://reviews.llvm.org/D7816
as the root cause of PR22678 which is causing an assertion inside the DAG combiner.
I'll follow up to the main thread as well.
llvm-svn: 230358
The logic is almost there already, with our special homogeneous aggregate
handling. Tweaking it like this allows front-ends to emit AAPCS compliant code
without ever having to count registers or add discarded padding arguments.
Only arrays of i32 and i64 are needed to model AAPCS rules, but I decided to
apply the logic to all integer arrays for more consistency.
llvm-svn: 230348
For almost all node types, if the target requested custom lowering, and
LowerOperation returned its input, we'd treat the original node as legal. This
did not work, however, for many loads and stores, because they follow
slightly different code paths, and we did not account for the possibility of
LowerOperation returning its input at those call sites.
I think that we now handle this consistently everywhere. At the call sites in
LegalizeDAG, we used to assert in this case, so there's no functional change
for any existing code there. For the call sites in LegalizeVectorOps, this
really only affects whether or not we set Changed = true, but I think makes the
semantics clearer.
No test case here, but it will be covered by an upcoming PowerPC commit adding
QPX support.
llvm-svn: 230332
This patch teaches the backend how to expand a double-half conversion into
a double-float conversion immediately followed by a float-half conversion.
We do this only under fast-math, and if float-half conversions are legal
for the target.
Added test CodeGen/X86/fastmath-float-half-conversion.ll
Differential Revision: http://reviews.llvm.org/D7832
llvm-svn: 230276
Front-ends could use global unnamed_addr to hold pointers to other
symbols, like @gotequivalent below:
@foo = global i32 42
@gotequivalent = private unnamed_addr constant i32* @foo
@delta = global i32 trunc (i64 sub (i64 ptrtoint (i32** @gotequivalent to i64),
i64 ptrtoint (i32* @delta to i64))
to i32)
The global @delta holds a data "PC"-relative offset to @gotequivalent,
an unnamed pointer to @foo. The darwin/x86-64 assembly output for this follows:
.globl _foo
_foo:
.long 42
.globl _gotequivalent
_gotequivalent:
.quad _foo
.globl _delta
_delta:
.long _gotequivalent-_delta
Since unnamed_addr indicates that the address is not significant, only
the content, we can optimize the case above by replacing pc-relative
accesses to "GOT equivalent" globals, by a PC relative access to the GOT
entry of the final symbol instead. Therefore, "delta" can contain a pc
relative relocation to foo's GOT entry and we avoid the emission of
"gotequivalent", yielding the assembly code below:
.globl _foo
_foo:
.long 42
.globl _delta
_delta:
.long _foo@GOTPCREL+4
There are a couple of advantages of doing this: (1) Front-ends that need
to emit a great deal of data to store pointers to external symbols could
save space by not emitting such "got equivalent" globals and (2) IR
constructs combined with this opt opens a way to represent GOT pcrel
relocations by using the LLVM IR, which is something we previously had
no way to express.
Differential Revision: http://reviews.llvm.org/D6922
rdar://problem/18534217
llvm-svn: 230264
It was previously using the subtarget to get values for the global
offset without actually checking each function as it was generating
code. Go ahead and solidify the current behavior and make the
existing FIXMEs more prominent.
As a note the ARM backend previously had a thumb1 and non-thumb1
set of defaults. Only the former was tested so I've changed the
behavior to only use that for now.
llvm-svn: 230245
The CONCAT_VECTORS combiner pass can transform the concat of two BUILD_VECTOR nodes into a single BUILD_VECTOR node.
This patch generalises this to support any number of BUILD_VECTOR nodes, and also permits UNDEF nodes to be included as well.
This was noticed as AVX vec128 -> vec256 canonicalization sometimes creates a CONCAT_VECTOR with a real vec128 lower and an vec128 UNDEF upper.
Differential Revision: http://reviews.llvm.org/D7816
llvm-svn: 230177
DAGCombine will rewrite an BUILD_VECTOR where all non-undef inputs some from
[US]INT_TO_FP, as a BUILD_VECTOR of integers with the conversion applied as a
vector operation. We check operation legality of the conversion, but fail to
check legality of the integer vector type itself. Because targets don't
normally override operation legality defaults for illegal types, we need to
check this also.
This came up in the context of the QPX vector entensions for PowerPC (which can
have legal floating-point vector types without corresponding legal integer
vector types). No in-tree test case for this yes, but one can be added once
the QPX support has been committed.
llvm-svn: 230176
When expanding a truncating store or extending load using vector extracts or
inserts and scalar stores and loads, we were giving each of these scalar stores
or loads the same alignment as the original vector operation. While this will
often be right (most vector operations, especially those produced by
autovectorization, have the alignment of the underlying scalar type), the
vector operation could certainly have a larger alignment.
No test case (yet); noticed by inspection.
llvm-svn: 230175
asm parsing since it's not subtarget dependent and we can't depend
upon the one hanging off the MachineFunction's subtarget still
being around.
llvm-svn: 230135
Synthesizing a call directly using the MI layer would confuse the frame
lowering code. This is problematic as frame lowering is highly
sensitive the particularities of calls, etc.
llvm-svn: 230129
Summary:
Letting them begin at the PHI instruction slightly simplifies the code
but more importantly avoids breaking the assumption that live ranges
starting at the block begin are also live at the end of the predecessor
blocks. The MachineVerifier checks that but was apparently never run in
the few instances where liveranges are calculated for machine-SSA
functions.
Reviewers: qcolombet
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D7779
llvm-svn: 230093
This allows sharing of FMA forming combines to work
with instructions that have the same semantics as a separate
multiply and add.
This is expand by default, and only formed post legalization
so it shouldn't have much impact on targets that do not want it.
llvm-svn: 230070
AsmPrinter.
getSubtargetInfo now asserts that the MachineFunction exists.
Debug printing of register naming now uses the register info
from MCAsmInfo as that's unchanging.
llvm-svn: 229978
Today a simple function that only catches exceptions and doesn't run
destructor cleanups ends up containing a dead call to _Unwind_Resume
(PR20300). We can't remove these dead resume instructions during normal
optimization because inlining might introduce additional landingpads
that do have cleanups to run. Instead we can do this during EH
preparation, which is guaranteed to run after inlining.
Fixes PR20300.
Reviewers: majnemer
Differential Revision: http://reviews.llvm.org/D7744
llvm-svn: 229944
during SetupMachineFunction. This is also the single use of MII
and it'll be changing to TargetInstrInfo (which is MachineFunction
based) in the next commit here.
llvm-svn: 229931
asm support in the asm printer. If we can get a subtarget from
the machine function then we should do so, otherwise we can
go ahead and create a default one since we're at the module
level.
llvm-svn: 229916
First, don't combine bit masking into vector shuffles (even ones the
target can handle) once operation legalization has taken place. Custom
legalization of vector shuffles may exist for these patterns (making the
predicate return true) but that custom legalization may in some cases
produce the exact bit math this matches. We only really want to handle
this prior to operation legalization.
However, the x86 backend, in a fit of awesome, relied on this. What it
would do is mark VSELECTs as expand, which would turn them into
arithmetic, which this would then match back into vector shuffles, which
we would then lower properly. Amazing.
Instead, the second change is to teach the x86 backend to directly form
vector shuffles from VSELECT nodes with constant conditions, and to mark
all of the vector types we support lowering blends as shuffles as custom
VSELECT lowering. We still mark the forms which actually support
variable blends as *legal* so that the custom lowering is bypassed, and
the legal lowering can even be used by the vector shuffle legalization
(yes, i know, this is confusing. but that's how the patterns are
written).
This makes the VSELECT lowering much more sensible, and in fact should
fix a bunch of bugs with it. However, as you'll see in the test cases,
right now what it does is point out the *hilarious* deficiency of the
new vector shuffle lowering when it comes to blends. Fortunately, my
very next patch fixes that. I can't submit it yet, because that patch,
somewhat obviously, forms the exact and/or pattern that the DAG combine
is matching here! Without this patch, teaching the vector shuffle
lowering to produce the right code infloops in the DAG combiner. With
this patch alone, we produce terrible code but at least lower through
the right paths. With both patches, all the regressions here should be
fixed, and a bunch of the improvements (like using 2 shufps with no
memory loads instead of 2 andps with memory loads and an orps) will
stay. Win!
There is one other change worth noting here. We had hilariously wrong
vectorization cost estimates for vselect because we fell through to the
code path that assumed all "expand" vector operations are scalarized.
However, the "expand" lowering of VSELECT is vector bit math, most
definitely not scalarized. So now we go back to the correct if horribly
naive cost of "1" for "not scalarized". If anyone wants to add actual
modeling of shuffle costs, that would be cool, but this seems an
improvement on its own. Note the removal of 16 and 32 "costs" for doing
a blend. Even in SSE2 we can blend in fewer than 16 instructions. ;] Of
course, we don't right now because of OMG bad code, but I'm going to fix
that. Next patch. I promise.
llvm-svn: 229835
1) We should not try to simplify if the sext has multiple uses
2) There is no need to simplify is the source value is already sign-extended.
Patch by Gil Rapaport <gil.rapaport@intel.com>
Differential Revision: http://reviews.llvm.org/D6949
llvm-svn: 229659
No functional changes intended.
(I plan on doing some modifications to this function and would like to
have as few unrelated changes as possible in the patch)
llvm-svn: 229649
The problem in the original patch was not switching back to .text after printing
an eh table.
Original message:
On ELF, put PIC jump tables in a non executable section.
Fixes PR22558.
llvm-svn: 229586
Previously `DwarfExpression::AddExpression()` relied on
default-constructing the end iterators for `DIExpression` -- once the
operands are represented explicitly via `MDExpression` (instead of via
the strange `StringRef` navigator in `DIHeaderIterator`) this won't
work. Explicitly take an iterator for the end of the range.
llvm-svn: 229572
Add support for having multiple sections with the same name and comdat.
Using this in combination with -ffunction-sections allows LLVM to output a .o
file with mulitple sections named .text. This saves space by avoiding long
unique names of the form .text.<C++ mangled name>.
llvm-svn: 229541
initialization. Initialize the subtarget once per function and
migrate Emit{Start|End}OfAsmFile to either use attributes on the
TargetMachine or get information from the subtarget we'd use
for assembling. One bit (getISAEncoding) touched the general
AsmPrinter and the debug output. Handle this one by passing
the function for the subprogram down and updating all callers
and users.
The top-level-ness of the ARM attribute output for assembly is,
by nature, contrary to how we'd want to do this for an LTO
situation where we have multiple cpu architectures so this
solution is good enough for now.
llvm-svn: 229528
This is a follow-on patch to:
http://reviews.llvm.org/D7093
That patch canonicalized constant splats as build_vectors,
and this patch removes the constant check so we can canonicalize
all splats as build_vectors.
This fixes the 2nd test case in PR22283:
http://llvm.org/bugs/show_bug.cgi?id=22283
The unfortunate code duplication between SelectionDAG and DAGCombiner
is discussed in the earlier patch review. At least this patch is just
removing code...
This improves an existing x86 AVX test and changes codegen in an ARM test.
Differential Revision: http://reviews.llvm.org/D7389
llvm-svn: 229511
While looking at a heap profile of a clang LTO bootstrap with -g, I
noticed that 2.2% of memory in an `llvm-lto` of clang is from calling
`DebugLoc::get()` in `collectVariableInfo()` (accounting for ~40% of
memory used for `MDLocation`s).
I suspect this was introduced by r226736, whose goal was to prevent
uniquing of `DebugLoc`s (goal achieved, if so).
There's no reason we need a `DebugLoc` here at all -- it was just being
used for (in)convenient API -- so the fix is to pass the scope and
inlined-at directly to `LexicalScopes::findInlinedScope()`.
llvm-svn: 229459
We cannot simply rematerialize instructions which only defining a
subregister, as the final value also depends on the previous
instructions.
This fixes test/CodeGen/R600/subreg-coalescer-bug.ll with subreg
liveness enabled.
llvm-svn: 229444
IMPLICIT_DEF is a generic instruction and has no (fixed) output register
class defined. The rematerialization code of the register coalescer
should not scan the instruction description for a register class.
This fixes a problem showing up in
test/CodeGen/R600/subreg-coalescer-crash.ll with subregister liveness
enabled.
llvm-svn: 229443
The previous fix in r225503 was needlessly complicated. The problem goes
away as well if the arguments to MergeValueNumberInto are supplied in the
correct order.
This was previously missed because the existing code already had the
wrong order but an additional later Merge was hiding the bug for the
main liverange VNI.
llvm-svn: 229424
This adds a safe interface to the machine independent InputArg struct
for accessing the index of the original (IR-level) argument. When a
non-native return type is lowered, we generate the hidden
machine-level sret argument on-the-fly. Before this fix, we were
representing this argument as OrigArgIndex == 0, which is an outright
lie. In particular this crashed in the AArch64 backend where we
actually try to access the type of the original argument.
Now we use a sentinel value for machine arguments that have no
original argument index. AArch64, ARM, Mips, and PPC now check for this
case before accessing the original argument.
Fixes <rdar://19792160> Null pointer assertion in AArch64TargetLowering
llvm-svn: 229413
For #pragma comment(linker, ...) MSVC expects the comment string to be quoted, but for #pragma comment(lib, ...) the compiler itself quotes the library name.
Since this distinction disappears by the time the directive reaches the backend, move quoting for the "lib" version to the frontend.
Differential Revision: http://reviews.llvm.org/D7652
llvm-svn: 229375
directly into blends of the splats.
These patterns show up even very late in the vector shuffle lowering
where we don't have any chance for DAG combining to kick in, and
blending is a tremendously simpler operation to model. By coercing the
shuffle into a blend we can much more easily match and lower shuffles of
splats.
Immediately with this change there are significantly more blends being
matched in the x86 vector shuffle lowering.
llvm-svn: 229308
test.
This was just a matter of the DAG combine for vector shuffles being too
aggressive. This is a bit of a grey area, but I think generally if we
can re-use intermediate shuffles, we should. Certainly, given the test
cases I have available, this seems like the right call.
llvm-svn: 229285
Canonicalize access to function attributes to use the simpler API.
getAttributes().getAttribute(AttributeSet::FunctionIndex, Kind)
=> getFnAttribute(Kind)
getAttributes().hasAttribute(AttributeSet::FunctionIndex, Kind)
=> hasFnAttribute(Kind)
Also, add `Function::getFnStackAlignment()`, and canonicalize:
getAttributes().getStackAlignment(AttributeSet::FunctionIndex)
=> getFnStackAlignment()
llvm-svn: 229208
SimplifyCFG now knows how to speculate calls to intrinsic cttz/ctlz that are
'cheap' for the target. Therefore, some of the logic in CodeGenPrepare
that was originally added at revision 224899 can now be removed.
This patch is basically a no functional change. It removes the duplicated
logic in CodeGenPrepare and converts all the existing target specific tests
for cttz/ctlz into SimplifyCFG tests.
Differential Revision: http://reviews.llvm.org/D7608
llvm-svn: 229105
Although such nodes are allocatable, the cost of spilling may be less than
allocating to register, so spilling the node may provide a better solution.
The assert does not account for this case, so remove it for now.
llvm-svn: 229103
LLVM's include tree and the use of using declarations to hide the
'legacy' namespace for the old pass manager.
This undoes the primary modules-hostile change I made to keep
out-of-tree targets building. I sent an email inquiring about whether
this would be reasonable to do at this phase and people seemed fine with
it, so making it a reality. This should allow us to start bootstrapping
with modules to a certain extent along with making it easier to mix and
match headers in general.
The updates to any code for users of LLVM are very mechanical. Switch
from including "llvm/PassManager.h" to "llvm/IR/LegacyPassManager.h".
Qualify the types which now produce compile errors with "legacy::". The
most common ones are "PassManager", "PassManagerBase", and
"FunctionPassManager".
llvm-svn: 229094
regressions for LLDB on Linux. Rafael indicated on lldb-dev that we
should just go ahead and revert these but that he wasn't at a computer.
The patches backed out are as follows:
r228980: Add support for having multiple sections with the name and ...
r228889: Invert the section relocation map.
r228888: Use the existing SymbolTableIndex intsead of doing a lookup.
r228886: Create the Section -> Rel Section map when it is first needed.
These patches look pretty nice to me, so hoping its not too hard to get
them re-instated. =D
llvm-svn: 229080
Using this in combination with -ffunction-sections allows LLVM to output a .o
file with mulitple sections named .text. This saves space by avoiding long
unique names of the form .text.<C++ mangled name>.
llvm-svn: 228980
The PowerPC backend has long promoted some floating-point vector operations
(such as select) to integer vector operations. Unfortunately, this behavior was
broken by r216555. When using FP_EXTEND/FP_ROUND for promotions, we must check
that both the old and new types are floating-point types. Otherwise, we must
use BITCAST as we did prior to r216555 for everything.
llvm-svn: 228969
