on any current target and aren't optimized in DAGCombiner. Instead
of using intermediate nodes, expand the operations, choosing between
simple loads/stores, target-specific code, and library calls,
immediately.
Previously, the code to emit optimized code for these operations
was only used at initial SelectionDAG construction time; now it is
used at all times. This fixes some cases where rep;movs was being
used for small copies where simple loads/stores would be better.
This also cleans up code that checks for alignments less than 4;
let the targets make that decision instead of doing it in
target-independent code. This allows x86 to use rep;movs in
low-alignment cases.
Also, this fixes a bug that resulted in the use of rep;stos for
memsets of 0 with non-constant memory size when the alignment was
at least 4. It's better to use the library in this case, which
can be significantly faster when the size is large.
This also preserves more SourceValue information when memory
intrinsics are lowered into simple loads/stores.
llvm-svn: 49572
For x86, if sse2 is available, it's not a good idea since cvtss2sd is slower than a movsd load and it prevents load folding. On x87, it's important to shrink fp constant since fldt is very expensive.
llvm-svn: 47931
Change several cases in SimplifyDemandedMask that don't ever do any
simplifying to reuse the logic in ComputeMaskedBits instead of
duplicating it.
llvm-svn: 47648
the return value is zero-extended if it isn't
sign-extended. It may also be any-extended.
Also, if a floating point value was returned
in a larger floating point type, pass 1 as the
second operand to FP_ROUND, which tells it
that all the precision is in the original type.
I think this is right but I could be wrong.
Finally, when doing libcalls, set isZExt on
a parameter if it is "unsigned". Currently
isSExt is set when signed, and nothing is
set otherwise. This should be right for all
calls to standard library routines.
llvm-svn: 47122
arrays. Also, as a convenience, don't barf, just
return false, if someone calls isTruncStoreLegal
or isLoadXLegal with an extended type for the in
memory type.
llvm-svn: 46352
1. Legalize now always promotes truncstore of i1 to i8.
2. Remove patterns and gunk related to truncstore i1 from targets.
3. Rename the StoreXAction stuff to TruncStoreAction in TLI.
4. Make the TLI TruncStoreAction table a 2d table to handle from/to conversions.
5. Mark a wide variety of invalid truncstores as such in various targets, e.g.
X86 currently doesn't support truncstore of any of its integer types.
6. Add legalize support for truncstores with invalid value input types.
7. Add a dag combine transform to turn store(truncate) into truncstore when
safe.
The later allows us to compile CodeGen/X86/storetrunc-fp.ll to:
_foo:
fldt 20(%esp)
fldt 4(%esp)
faddp %st(1)
movl 36(%esp), %eax
fstps (%eax)
ret
instead of:
_foo:
subl $4, %esp
fldt 24(%esp)
fldt 8(%esp)
faddp %st(1)
fstps (%esp)
movl 40(%esp), %eax
movss (%esp), %xmm0
movss %xmm0, (%eax)
addl $4, %esp
ret
llvm-svn: 46140
1) Change the interface to TargetLowering::ExpandOperationResult to
take and return entire NODES that need a result expanded, not just
the value. This allows us to handle things like READCYCLECOUNTER,
which returns two values.
2) Implement (extremely limited) support in LegalizeDAG::ExpandOp for MERGE_VALUES.
3) Reimplement custom lowering in LegalizeDAGTypes in terms of the new
ExpandOperationResult. This makes the result simpler and fully
general.
4) Implement (fully general) expand support for MERGE_VALUES in LegalizeDAGTypes.
5) Implement ExpandOperationResult support for ARM f64->i64 bitconvert and ARM
i64 shifts, allowing them to work with LegalizeDAGTypes.
6) Implement ExpandOperationResult support for X86 READCYCLECOUNTER and FP_TO_SINT,
allowing them to work with LegalizeDAGTypes.
LegalizeDAGTypes now passes several more X86 codegen tests when enabled and when
type legalization in LegalizeDAG is ifdef'd out.
llvm-svn: 44300
transformation. Previously, it's restricted by ensuring the number of load uses
is one. Now the restriction is loosened up by allowing setcc uses to be
"extended" (e.g. setcc x, c, eq -> setcc sext(x), sext(c), eq).
llvm-svn: 43465
types. This is needed for SIGN_EXTEND_INREG at least.
It is not clear if this is correct for other operations.
On the other hand, for the various load/store actions
it seems to correct to return the type action, as is
currently done.
Also, it seems that SelectionDAG::getValueType can be
called for extended value types; introduce a map for
holding these, since we don't really want to extend
the vector to be 2^32 pointers long!
Generalize DAGTypeLegalizer::PromoteResult_TRUNCATE
and DAGTypeLegalizer::PromoteResult_INT_EXTEND to handle
the various funky possibilities that apints introduce,
for example that you can promote to a type that needs
to be expanded.
llvm-svn: 43071
codegen support. This should have no effect on codegen
for other types. Debatable bits: (1) the use (abuse?)
of a set in SDNode::getValueTypeList; (2) the length of
getTypeToTransformTo, which maybe should be refactored
with a non-inline part for extended value types.
llvm-svn: 43030
enabled by passing -tailcallopt to llc. The optimization is
performed if the following conditions are satisfied:
* caller/callee are fastcc
* elf/pic is disabled OR
elf/pic enabled + callee is in module + callee has
visibility protected or hidden
llvm-svn: 42870
keep f32 in SSE registers and f64 in x87. This
is effectively a new codegen mode.
Change addLegalFPImmediate to permit float and
double variants to do different things.
Adjust callers.
llvm-svn: 42246
Add APFloat interfaces to ConstantFP, SelectionDAG.
Fix integer bit in double->APFloat conversion.
Convert LegalizeDAG to use APFloat interface in
ConstantFPSDNode uses.
llvm-svn: 41587
(constants are still not handled). Adds ConvertActions
to control fp-to-fp conversions (these are currently
defaulted for all other targets, so no changes there).
llvm-svn: 40958
illegal value type will be transformed to, for code that needs the
register type after all transformations instead of just after the first
transformation.
Factor out the code that uses this information to do copy-from-regs and
copy-to-regs for various purposes into separate functions so that they
are done consistently.
llvm-svn: 37781
extended vector types. Remove the special SDNode opcodes used for pre-legalize
vector operations, and the special MVT::Vector type used with them. Adjust
lowering and legalize to work with the normal SDNode kinds instead, and to
use the normal MVT functions to work with vector types instead of using the
two special operands that the pre-legalize nodes held.
This allows pre-legalize and post-legalize DAGs, and the code that operates
on them, to be more consistent. Pre-legalize vector operators can be handled
more consistently with scalar operators. And, -view-dag-combine1-dags and
-view-legalize-dags now look prettier for vector code.
llvm-svn: 37719
TargetLowering to SelectionDAG so that they have more convenient
access to the current DAG, in preparation for the ValueType routines
being changed from standalone functions to members of SelectionDAG for
the pre-legalize vector type changes.
llvm-svn: 37704
1. New parameter attribute called 'inreg'. It has meaning "place this
parameter in registers, if possible". This is some generalization of
gcc's regparm(n) attribute. It's currently used only in X86-32 backend.
2. Completely rewritten CC handling/lowering code inside X86 backend.
Merged stdcall + c CCs and fastcall + fast CC.
3. Dropped CSRET CC. We cannot add struct return variant for each
target-specific CC (e.g. stdcall + csretcc and so on).
4. Instead of CSRET CC introduced 'sret' parameter attribute. Setting in
on first attribute has meaning 'This is hidden pointer to structure
return. Handle it gently'.
5. Fixed small bug in llvm-extract + add new feature to
FunctionExtraction pass, which relinks all internal-linkaged callees
from deleted function to external linkage. This will allow further
linking everything together.
NOTEs: 1. Documentation will be updated soon.
2. llvm-upgrade should be improved to translate csret => sret.
Before this, there will be some unexpected test fails.
llvm-svn: 33597
Implement the arbitrary bit-width integer feature. The feature allows
integers of any bitwidth (up to 64) to be defined instead of just 1, 8,
16, 32, and 64 bit integers.
This change does several things:
1. Introduces a new Derived Type, IntegerType, to represent the number of
bits in an integer. The Type classes SubclassData field is used to
store the number of bits. This allows 2^23 bits in an integer type.
2. Removes the five integer Type::TypeID values for the 1, 8, 16, 32 and
64-bit integers. These are replaced with just IntegerType which is not
a primitive any more.
3. Adjust the rest of LLVM to account for this change.
Note that while this incremental change lays the foundation for arbitrary
bit-width integers, LLVM has not yet been converted to actually deal with
them in any significant way. Most optimization passes, for example, will
still only deal with the byte-width integer types. Future increments
will rectify this situation.
llvm-svn: 33113
- Add isSelectExpensive() etc. It's used to tell codegen that select is expensive for a given target, avoid using it if possible. Currently it's only
used to expand FCOPYSIGN.
llvm-svn: 32939
Chain and address ptr remains as operands. SrcValue, extending mode, extending
VT (or rather loaded VT before extension) are now instance variables of
LoadSDNode.
Introduce load / store addressing modes to represent pre- and post-indexed
load and store. Also added an additional operand offset that is only used in
post-indexed mode (i.e. base ptr += offset after load/store).
Added alignment info (not yet used) and isVolatile fields.
llvm-svn: 30843
Minor tweaks in public headers and a few .cpp files so that LLVM can build
successfully with -pedantic and projects using LLVM with -pedantic don't
get warnings from LLVM. There's still more -pedantic warnings to fix.
llvm-svn: 28453
isShuffleMaskLegal, used to determine if it makes sense to turn a
"vector clear" (e.g. pand V, <0, -1, 0, -1> to a shuffle of the vector and
a zero vector.
llvm-svn: 27873
Add a new flag to TargetLowering indicating if the target has really cheap
signed division by powers of two, make ppc use it. This will probably go
away in the future.
Implement some more ISD::SDIV folds in the dag combiner
Remove now dead code in the x86 backend.
llvm-svn: 23853
allows us to lower legal return types to something else, to meet ABI
requirements (such as that i64 be returned in two i32 regs on Darwin/ppc).
llvm-svn: 23802
This is the first incremental patch to implement this feature. It adds no
functionality to LLVM but setup up the information needed from targets in
order to implement the optimization correctly. Each target needs to specify
the maximum number of store operations for conversion of the llvm.memset,
llvm.memcpy, and llvm.memmove intrinsics into a sequence of store operations.
The limit needs to be chosen at the threshold of performance for such an
optimization (generally smallish). The target also needs to specify whether
the target can support unaligned stores for multi-byte store operations.
This helps ensure the optimization doesn't generate code that will trap on
an alignment errors.
More patches to follow.
llvm-svn: 22468
1. Pass Value*'s into lowering methods so that the proper pointers can be
added to load/stores from the valist
2. Intrinsics that return void should only return a token chain, not a token
chain/retval pair.
3. Rename LowerVAArgNext -> LowerVAArg, because VANext is long gone.
llvm-svn: 22338
Add a hook to find out how the target handles shift amounts that are out of
range. Either they are undefined (the default), they mask the shift amount
to the size of the register (X86, Alpha, etc), or they extend the shift (PPC).
This defaults to undefined, which is conservatively correct.
llvm-svn: 19676
