Summary: We do not care about intrinsic calls when assigning discriminators.
Reviewers: davidxl, dnovillo
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D23212
llvm-svn: 277843
This generated IR based on the order of evaluation, which is different
between GCC and Clang. With that in mind you get bootstrap miscompares
if you compare a Clang built with GCC-built Clang vs. Clang built with
Clang-built Clang. Diagnosing that made my head hurt.
This also reverts commit r277337, which "fixed" the test case.
llvm-svn: 277820
Not a correctness issue, but it would be nice if we didn't have to
recompute our block numbering (worst-case) every time we move MSSA.
llvm-svn: 277652
This reverts commit r277611 and the followup r277614.
Bootstrap builds and chromium builds are crashing during inlining after
this change.
llvm-svn: 277642
This is a follow-up to r277637. It teaches MemorySSA that invariant
loads (and loads of provably constant memory) are always liveOnEntry.
llvm-svn: 277640
This patch makes MemorySSA recognize atomic/volatile loads, and makes
MSSA treat said loads specially. This allows us to be a bit more
aggressive in some cases.
Administrative note: Revision was LGTM'ed by reames in person.
Additionally, this doesn't include the `invariant.load` recognition in
the differential revision, because I feel it's better to commit that
separately. Will commit soon.
Differential Revision: https://reviews.llvm.org/D16875
llvm-svn: 277637
It is possible for the value map to not have an entry for some value
that has already been removed.
I don't have a testcase, this is fall-out from a buildbot.
llvm-svn: 277614
We were able to figure out that the result of a call is some constant.
While propagating that fact, we added the constant to the value map.
This is problematic because it results in us losing the call site when
processing the value map.
This fixes PR28802.
llvm-svn: 277611
This fixes a bug where we'd sometimes cache overly-conservative results
with our walker. This bug was made more obvious by r277480, which makes
our cache far more spotty than it was. Test case is llvm-unit, because
we're likely going to use CachingWalker only for def optimization in the
future.
The bug stems from that there was a place where the walker assumed that
`DefNode.Last` was a valid target to cache to when failing to optimize
phis. This is sometimes incorrect if we have a cache hit. The fix is to
use the thing we *can* assume is a valid target to cache to. :)
llvm-svn: 277559
Summary: We really want to move towards MemoryLocOrCall (or fix AA) everywhere, but for now, this lets us have a single instructionClobbersQuery.
Reviewers: george.burgess.iv
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D23072
llvm-svn: 277530
As agreed in post-commit review of r265388, I'm switching the flag to
its original value until the 90% runtime performance regression on
SingleSource/Benchmarks/Stanford/Bubblesort is addressed.
llvm-svn: 277524
Fixes PR28670
Summary:
Rewrite the use optimizer to be less memory intensive and 50% faster.
Fixes PR28670
The new use optimizer works like a standard SSA renaming pass, storing
all possible versions a MemorySSA use could get in a stack, and just
tracking indexes into the stack.
This uses much less memory than caching N^2 alias query results.
It's also a lot faster.
The current version defers phi node walking to the normal walker.
Reviewers: george.burgess.iv
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D23032
llvm-svn: 277480
Added ability to estimate the entry count of the extracted function and
the branch probabilities of the exit branches.
Patch by River Riddle!
Differential Revision: https://reviews.llvm.org/D22744
llvm-svn: 277411
Using RAUW was wrong here; if we have a switch transform such as:
18 -> 6 then
6 -> 0
If we use RAUW, while performing the second transform the *transformed* 6
from the first will be also replaced, so we end up with:
18 -> 0
6 -> 0
Found by clang stage2 bootstrap; testcase added.
llvm-svn: 277332
If a switch is sparse and all the cases (once sorted) are in arithmetic progression, we can extract the common factor out of the switch and create a dense switch. For example:
switch (i) {
case 5: ...
case 9: ...
case 13: ...
case 17: ...
}
can become:
if ( (i - 5) % 4 ) goto default;
switch ((i - 5) / 4) {
case 0: ...
case 1: ...
case 2: ...
case 3: ...
}
or even better:
switch ( ROTR(i - 5, 2) {
case 0: ...
case 1: ...
case 2: ...
case 3: ...
}
The division and remainder operations could be costly so we only do this if the factor is a power of two, and emit a right-rotate instead of a divide/remainder sequence. Dense switches can be lowered significantly better than sparse switches and can even be transformed into lookup tables.
llvm-svn: 277325
When extracting a set of blocks make sure to inherit all of the target
dependent attributes to make sure that the function will be valid for
lowering. One example is the "target-features" attribute for x86, if the
extracted region has functionality that relies on a specific feature it
will fail to be lowered.
This also allows for extracted functions to be valid for inlining, at
least back into the parent function, as the target attributes are tested
when inlining for compatibility.
Patch by River Riddle!
Differential Revision: https://reviews.llvm.org/D22713
llvm-svn: 277315
Added ability to estimate the entry count of the extracted function and
the branch probabilities of the exit branches.
Patch by River Riddle!
Differential Revision: https://reviews.llvm.org/D22744
llvm-svn: 277313
LoopUnroll is a loop pass, so the analysis of OptimizationRemarkEmitter
is added to the common function analysis passes that loop passes
depend on.
The BFI and indirectly BPI used in this pass is computed lazily so no
overhead should be observed unless -pass-remarks-with-hotness is used.
This is how the patch affects the O3 pipeline:
Dominator Tree Construction
Natural Loop Information
Canonicalize natural loops
Loop-Closed SSA Form Pass
Basic Alias Analysis (stateless AA impl)
Function Alias Analysis Results
Scalar Evolution Analysis
+ Lazy Branch Probability Analysis
+ Lazy Block Frequency Analysis
+ Optimization Remark Emitter
Loop Pass Manager
Rotate Loops
Loop Invariant Code Motion
Unswitch loops
Simplify the CFG
Dominator Tree Construction
Basic Alias Analysis (stateless AA impl)
Function Alias Analysis Results
Combine redundant instructions
Natural Loop Information
Canonicalize natural loops
Loop-Closed SSA Form Pass
Scalar Evolution Analysis
+ Lazy Branch Probability Analysis
+ Lazy Block Frequency Analysis
+ Optimization Remark Emitter
Loop Pass Manager
Induction Variable Simplification
Recognize loop idioms
Delete dead loops
Unroll loops
...
llvm-svn: 277203
Patch by Sunita Marathe
Third try, now following fixes to MSan to handle mempcy in such a way that this commit won't break the MSan buildbots. (Thanks, Evegenii!)
llvm-svn: 277189
A ConstantVector can have ConstantExpr operands and vice versa.
However, the folder had no ability to fold ConstantVectors which, in
some cases, was an optimization barrier.
Instead, rephrase the folder in terms of Constants instead of
ConstantExprs and teach callers how to deal with failure.
llvm-svn: 277099
Summary:
copypasta doc of ImportedFunctionsInliningStatistics class
\brief Calculate and dump ThinLTO specific inliner stats.
The main statistics are:
(1) Number of inlined imported functions,
(2) Number of imported functions inlined into importing module (indirect),
(3) Number of non imported functions inlined into importing module
(indirect).
The difference between first and the second is that first stat counts
all performed inlines on imported functions, but the second one only the
functions that have been eventually inlined to a function in the importing
module (by a chain of inlines). Because llvm uses bottom-up inliner, it is
possible to e.g. import function `A`, `B` and then inline `B` to `A`,
and after this `A` might be too big to be inlined into some other function
that calls it. It calculates this statistic by building graph, where
the nodes are functions, and edges are performed inlines and then by marking
the edges starting from not imported function.
If `Verbose` is set to true, then it also dumps statistics
per each inlined function, sorted by the greatest inlines count like
- number of performed inlines
- number of performed inlines to importing module
Reviewers: eraman, tejohnson, mehdi_amini
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D22491
llvm-svn: 277089
Sanitizers set nobuiltin attribute on certain library functions to
avoid a situation where such function is neither instrumented nor
intercepted.
At the moment the list of interesting functions is hardcoded. This
change replaces it with logic based on
TargetLibraryInfo::hasOptimizedCodegen and the presense of readnone
function attribute (sanitizers are generally interested in memory
behavior of library functions).
This is expected to be a no-op change: the new logic matches exactly
the same set of functions.
r276771 (currently reverted) added mempcpy() to the list, breaking
MSan tests. With this change, r276771 can be safely re-landed.
llvm-svn: 277086
Summary:
LCSSAWrapperPass currently doesn't override verifyAnalysis method, so pass
manager doesn't verify LCSSA. This patch adds the method so that we start
verifying LCSSA between loop passes.
Reviewers: chandlerc, sanjoy, hfinkel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D22888
llvm-svn: 276941
This lets you actually check to see if a block is valid before trying to
extract.
Patch by River Riddle!
Differential Revision: https://reviews.llvm.org/D22699
llvm-svn: 276846
There didn't appear to be a good reason to use iplist in this case, a regular
list of unique_ptr works just as well.
Change made in preparation to a new PM port (since iplist is not moveable).
llvm-svn: 276668
Allowed loop vectorization with secondary FP IVs. Like this:
float *A;
float x = init;
for (int i=0; i < N; ++i) {
A[i] = x;
x -= fp_inc;
}
The auto-vectorization is possible when the induction binary operator is "fast" or the function has "unsafe" attribute.
Differential Revision: https://reviews.llvm.org/D21330
llvm-svn: 276554
checkClobberSanity will now be run for all results of `ClobberWalk`,
instead of just the crazy phi-optimized ones. This can help us catch
cases where our cache is being wonky.
llvm-svn: 276553
This unblocks the new PM part of River's patch in
https://reviews.llvm.org/D22706
Conveniently, this same change was needed for D21921 and so these
changes are just spun out from there.
llvm-svn: 276515
A seemingly common use for the walker's getClobberingMemoryAccess
function is:
```
MemoryAccess *getClobber(MemorySSAWalker *W, MemoryUseOrDef *MUD) {
const Instruction *I = MUD->getMemoryInst();
return W->getClobberingMemoryAccess(I);
}
```
Which is kind of redundant, since walkers will ultimately query MSSA to
find out which MemoryAccess `I` maps to (...which is always `MUD`).
So, this patch adds an overload of getClobberingMemoryAccess that
accepts MemoryAccesses directly. As a result, the Instruction overload
of getClobberingMemoryAccess becomes a lightweight wrapper around our
new overload.
Additionally, this patch un`virtual`izes the Instruction overload of
getClobberingMemoryAccess, since there doesn't seem to be a walker that
benefits from that being virtual, and I can't think of how else one
would implement it. Happy to make it virtual again if we would benefit
from doing so.
llvm-svn: 276169