Right shift patterns will no longer incorrectly accept a shift
amount of zero. At the same time they will allow larger shift
amounts that are now saturated to their upper bound.
Patterns have been extended to enable immediate forms for shifts
taking an arbitrary predicate.
This patch also unifies the code path for immediate parsing so the
i64 based shifts are no longer treated specially.
Differential Revision: https://reviews.llvm.org/D86084
This patch adds lowerShuffleWithVTRUNC to handle basic binary shuffles that can be lowered either as a pure ISD::TRUNCATE or a X86ISD::VTRUNC (with undef/zero values in the remaining upper elements).
We concat the binary sources together into a single 256-bit source vector. To avoid regressions we perform this after we've tried to lower with PACKS/PACKUS which typically does a cleaner job than a concat.
For non-AVX512VL cases we have to canonicalize VTRUNC cases to use a 512-bit source vectors (inserting undefs/zeros in the upper elements as necessary), truncate and then (possibly) extract the 128-bit result.
This should address the last regressions in D66004
Differential Revision: https://reviews.llvm.org/D86093
This patch introduces a new abstract attribute `AANoUndef` which corresponds to `noundef` IR attribute and deduce them.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D85184
This is splitted out from D85519, but significantly reworked.
Changes:
1) This test was changed to stop using python.
2) Use NoHeaders: true instead of `llvm-objcopy --strip-sections`.
3) Test llvm-readelf too (not just llvm-readobj).
4) Simplify the YAML used a bit (e.g. remove PT_LOAD).
5) Test 2 different cases: objects with section header table and without.
Differential revision: https://reviews.llvm.org/D86073
The `mips-got-overlapped.test` was introduced in D16968 and its intention is
to check that when there is an empty section at the same address as `.got`,
then we are able to locate `.got` and dump it.
The issue is that this test does not test llvm-readelf and uses a precompiled
object. This path starts using YAML instead and merges
mips-got-overlapped.test to mips-got.test.
Differential revision: https://reviews.llvm.org/D86080
Theory was that we should never reach a non-type unit (eg: type in an
anonymous namespace) when we're already in the invalid "encountered an
address-use, so stop emitting types for now, until we throw out the
whole type tree to restart emitting in non-type unit" state. But that's
not the case (prior commit cleaned up one reason this wasn't exposed
sooner - but also makes it easier to test/demonstrate this issue)
This reads more like what you'd expect the DWARF to look like (from the
lexical order of C++ - template parameters come before members, etc),
and also happens to make it easier to tickle (& thus test) a bug related
to type units and Split DWARF I'm about to fix.
Before this change we looked through all memory operations in a function
even if the first was an unknown call that could do anything. This did
cost a lot of time but there is little use to do so. We also avoid
creating AAs for things that we would have looked at in case no other AA
will; that is the reason for the test changes.
Running only the attributor-cgscc pass on a IR version of
`llvm-test-suite/MultiSource/Applications/SPASS/clause.c` reduced the
time we spend in `AAMemoryLocation::update` from 4% total to
0.9% (disclaimer: no accurate measurements).
Before we tired to create a dominator tree for a declaration when we
wanted to determine if the function pointer is `nonnull`. We now avoid
looking at global values if `Value::getPointerDereferenceableBytes` not
already determined `nonnull`.
Currently it is hard to avoid having LLVM link to the system install of
ncurses, since it uses check_library_exists to find e.g. libtinfo and
not find_library or find_package.
With this change the ncurses lib is found with find_library, which also
considers CMAKE_PREFIX_PATH. This solves an issue for the spack package
manager, where we want to use the zlib installed by spack, and spack
provides the CMAKE_PREFIX_PATH for it.
This is a similar change as https://reviews.llvm.org/D79219, which just
landed in master.
Differential revision: https://reviews.llvm.org/D85820
This patch implements the vec_extractm function prototypes in altivec.h in
order to utilize the vector extract with mask instructions introduced in Power10.
Differential Revision: https://reviews.llvm.org/D82675
WIP that tries to hide the latency of runtime calls that involve host to
device memory transfers by splitting them into their "issue" and "wait"
versions. The "issue" is moved upwards as much as possible. The "wait" is
moved downards as much as possible. The "issue" issues the memory transfer
asynchronously, returning a handle. The "wait" waits in the returned
handle for the memory transfer to finish. We still lack of the movement.
Doesn't really matter in practice but that's how the nodes are
normally created by SelectionDAGBuilder. So we should match.
Found by temporarily hacking type checks into isel table.
This is the type declared in X86InstrFragmentsSIMD.td. ISel pattern
matching doesn't check so it doesn't matter in practice. Maybe for
SelectionDAG CSE it would matter.
Different training algorithms may produce models that, besides the main
policy output (i.e. inline/don't inline), produce additional outputs
that are necessary for the next training stage. To facilitate this, in
development mode, we require the training policy infrastructure produce
a description of the outputs that are interesting to it, in the form of
a JSON file. We special-case the first entry in the JSON file as the
inlining decision - we care about its value, so we can guide inlining
during training - but treat the rest as opaque data that we just copy
over to the training log.
Differential Revision: https://reviews.llvm.org/D85674
When diffing disassembly dump of two binaries, I see lots of noises from mismatched jump target addresses and global data references, which unnecessarily causes diffs on every function, making it impractical. I'm trying to symbolize the raw binary addresses to minimize the diff noise.
In this change, a local branch target is modeled as a label and the branch target operand will simply be printed as a label. Local labels are collected by a separate pre-decoding pass beforehand. A global data memory operand will be printed as a global symbol instead of the raw data address. Unfortunately, due to the way the disassembler is set up and to be less intrusive, a global symbol is always printed as the last operand of a memory access instruction. This is less than ideal but is probably acceptable from checking code quality point of view since on most targets an instruction can have at most one memory operand.
So far only the X86 disassemblers are supported.
Test Plan:
llvm-objdump -d --x86-asm-syntax=intel --no-show-raw-insn --no-leading-addr :
```
Disassembly of section .text:
<_start>:
push rax
mov dword ptr [rsp + 4], 0
mov dword ptr [rsp], 0
mov eax, dword ptr [rsp]
cmp eax, dword ptr [rip + 4112] # 202182 <g>
jge 0x20117e <_start+0x25>
call 0x201158 <foo>
inc dword ptr [rsp]
jmp 0x201169 <_start+0x10>
xor eax, eax
pop rcx
ret
```
llvm-objdump -d **--symbolize-operands** --x86-asm-syntax=intel --no-show-raw-insn --no-leading-addr :
```
Disassembly of section .text:
<_start>:
push rax
mov dword ptr [rsp + 4], 0
mov dword ptr [rsp], 0
<L1>:
mov eax, dword ptr [rsp]
cmp eax, dword ptr <g>
jge <L0>
call <foo>
inc dword ptr [rsp]
jmp <L1>
<L0>:
xor eax, eax
pop rcx
ret
```
Note that the jump instructions like `jge 0x20117e <_start+0x25>` without this work is printed as a real target address and an offset from the leading symbol. With a change in the optimizer that adds/deletes an instruction, the address and offset may shift for targets placed after the instruction. This will be a problem when diffing the disassembly from two optimizers where there are unnecessary false positives due to such branch target address changes. With `--symbolize-operand`, a label is printed for a branch target instead to reduce the false positives. Similarly, the disassemble of PC-relative global variable references is also prone to instruction insertion/deletion.
Reviewed By: jhenderson, MaskRay
Differential Revision: https://reviews.llvm.org/D84191
While the original implementation added in D85787 / ae7f08812e0995481eb345cecc5dd4529829ba44
is not incorrect, it is known to be suboptimal.
In particular, it is not incorrect to use the basic block
in which the original `insertvalue` instruction is located
as the merge point, that is not necessarily optimal,
as `@test6` shows.
We should look at all the AggElts, and, if they are all defined
in the same basic block, then that is the basic block we should use.
On RawSpeed library, this catches +4% (+50) more cases.
On vanilla LLVM test-suits, this catches +12% (+92) more cases.
In a following patch, UseBB will be detected later,
so capturing it is potentially error-prone (capture by ref vs by val).
Also, parametrized UseBB will likely be needed
for multiple levels of PHI indirections later on anyways.
This is NFC at the moment, because right now we always insert the PHI
into the same basic block in which the original `insertvalue` instruction
is, but that will change.
Also, fixes addition of the suffix to the value names.
Some of the lower implementations were relying on this, however the
type was not set depending on which form .lower* helper form you were
using. For instance, if you used an unconditonal lower(), the type was
never set. Most of the lower actions do not benefit from a type
parameter, and just expand in terms of the original operation's types.
However, some lowerings could benefit from an additional type hint to
combine a promotion and an expansion. An example of this is for
add/sub sat. The DAG integer legalization tries to use smarter
expansions directly when promoting the integer type, and doesn't
always produce the same instruction with a wider type.
Treat this as an optional hint argument, that only means something for
specific lower actions. It may be useful to generalize this mechanism
to pass a full list of type indexes and desired types, but I haven't
run into a case like that yet.
SUMMARY:
1. This patch provided API for decoding the traceback table info and unit test for the these API.
2. Another patchs will do the following things:
2.1 added a new option --traceback-table to decode the trace back table information for xcoff object file when
using llvm-objdump to disassemble the xcoff objfile.
2.2 print out the traceback table information for llvm-objdump.
Reviewers: Jason liu, Hubert Tong, James Henderson
Differential Revision: https://reviews.llvm.org/D81585
LBAEL => LABEL
I encountered this typo elsewhere and I decided to run a global search.
It probably was unnoticed because I think CHECK-LBAEL: is ignored by
lit.
Differential Revision: https://reviews.llvm.org/D85569
The "isa" checks were less constrained because they allow
target constants, but the later matching code would bail
out on those anyway, so this should be slightly more
efficient.
