This change follows up defaults for GCC and Clang, so LLVM does not differ
from them. While number of the test files are touched with this change, they
all keep the old (expected) behaviour with the explicit option:
"-relocation-model=pic"
The tests that have not been touched are insensitive to relocation model.
Differential Revision: http://reviews.llvm.org/D17995
llvm-svn: 265949
Summary:
This is the first step in also serializing the index out to LLVM
assembly.
The per-module summary written to bitcode is moved out of the bitcode
writer and to a new analysis pass (ModuleSummaryIndexWrapperPass).
The pass itself uses a new builder class to compute index, and the
builder class is used directly in places where we don't have a pass
manager (e.g. llvm-as).
Because we are computing summaries outside of the bitcode writer, we no
longer can use value ids created by the bitcode writer's
ValueEnumerator. This required changing the reference graph edge type
to use a new ValueInfo class holding a union between a GUID (combined
index) and Value* (permodule index). The Value* are converted to the
appropriate value ID during bitcode writing.
Also, this enables removal of the BitWriter library's dependence on the
Analysis library that was previously required for the summary computation.
Reviewers: joker.eph
Subscribers: joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D18763
llvm-svn: 265941
When we see a .arch or .cpu directive, we should try to avoid switching
ARM/Thumb mode if possible.
If we do have to switch modes, we also need to emit the correct mapping
symbol for the new ISA. We did not do this previously, so could emit
ARM code with Thumb mapping symbols (or vice-versa).
The GAS behaviour is to always stay in the same mode, and to emit an
error on any instructions seen when the current mode is not available on
the current target. We can't represent that situation easily (we assume
that Thumb mode is available if ModeThumb is set), so we differ from the
GAS behaviour when switching to a target that can't support the old
mode. I've added a warning for when this implicit mode-switch occurs.
Differential Revision: http://reviews.llvm.org/D18955
llvm-svn: 265936
This adds a conditional variant of CallBR instruction, CallBCR. Also,
it can be fused with integer comparisons, resulting in one of the new
C*BCall instructions.
In addition to CallBRCL limitations, this has another one: it won't
trigger if the function to call isn't already in %r1 - see f22 in the
test for an example (it's also why the loads in tests are volatile).
Author: koriakin
Differential Revision: http://reviews.llvm.org/D18928
llvm-svn: 265933
Restrict the max length of long nops for Lakemont to 7. Experiments on MCU
benchmarks (Dhrystone, Coremark) show that this is the most optimal length.
Differential Revision: http://reviews.llvm.org/D18897
llvm-svn: 265924
Summary:
If we can prove that an op.with.overflow intrinsic does not overflow, we
can get rid of the intrinsic, and replace it with non-wrapping
arithmetic.
Reviewers: atrick, regehr
Subscribers: sanjoy, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D18685
llvm-svn: 265913
Summary:
This change teaches SCEV to see reduce `(extractvalue
0 (op.with.overflow X Y))` into `op X Y` (with a no-wrap tag if
possible).
Reviewers: atrick, regehr
Subscribers: mcrosier, mzolotukhin, llvm-commits
Differential Revision: http://reviews.llvm.org/D18684
llvm-svn: 265912
Extend the existing lowering of vXi8 multiplies to support v64i8 on avx512bw targets.
I added the Lower512IntArith helper function to help with this - not sure how often this could be used in the future, but it seemed better than putting all that logic inside LowerMUL.
Differential Revision: http://reviews.llvm.org/D18937
llvm-svn: 265902
Vectorization cost of uniform load wasn't correctly calculated.
As a result, a simple loop that loads a uniform value wasn't vectorized.
Differential Revision: http://reviews.llvm.org/D18940
llvm-svn: 265901
Summary:
After we make the adjustment, we can assume that for local allocas, but
not for stack parameters, the return address, or any other fixed stack
object (which has a negative offset and therefore lies prior to the
adjusted SP).
Fixes PR26662.
Reviewers: hfinkel, qcolombet, rnk
Subscribers: rnk, llvm-commits
Differential Revision: http://reviews.llvm.org/D18471
llvm-svn: 265886
This patch drops the debug info for all DISubprograms that are
(a) not attached to an llvm::Function and
(b) not indirectly reachable via inline scopes from any surviving Function and
(c) not reachable from a type (i.e.: member functions).
Background: I'm currently working on a patch to reverse the pointers
between DICompileUnit and DISubprogram (for more info check Duncan's RFC
on lazy-loading of debug info metadata
http://lists.llvm.org/pipermail/llvm-dev/2016-March/097419.html).
The idea is to remove the list of subprograms from DICompileUnit and
instead point to the owning compile unit from each DISubprogram.
After doing this all DISubprograms fulfilling the above criteria will be
implicitly dropped unless we go through an extra effort to preserve them.
http://reviews.llvm.org/D18477
<rdar://problem/25256815>
llvm-svn: 265876
This patch adds support for decoding XOP VPPERM instruction when it represents a basic shuffle.
The mask decoding required the existing MCInstrLowering code to be updated to support binary shuffles - the implementation now matches what is done in X86InstrComments.cpp.
Differential Revision: http://reviews.llvm.org/D18441
llvm-svn: 265874
Sample-based profiling and optimization remarks currently remove
DICompileUnits from llvm.dbg.cu to suppress the emission of debug info
from them. This is somewhat of a hack and only borderline legal IR.
This patch uses the recently introduced NoDebug emission kind in
DICompileUnit to achieve the same result without breaking the Verifier.
A nice side-effect of this change is that it is now possible to combine
NoDebug and regular compile units under LTO.
http://reviews.llvm.org/D18808
<rdar://problem/25427165>
llvm-svn: 265861
This is a cleanup patch for SSP support in LLVM. There is no functional change.
llvm.stackprotectorcheck is not needed, because SelectionDAG isn't
actually lowering it in SelectBasicBlock; rather, it adds check code in
FinishBasicBlock, ignoring the position where the intrinsic is inserted
(See FindSplitPointForStackProtector()).
llvm-svn: 265851
In Memcpy lowering we had missed a dependence from the load of the
operation to successor operations. This causes us to potentially
construct an in initial DAG with a memory dependence not fully
represented in the chain sub-DAG but rather require looking at the
entire DAG breaking alias analysis by allowing incorrect repositioning
of memory operations.
To work around this, r200033 changed DAGCombiner::GatherAllAliases to be
conservative if any possible issues to happen. Unfortunately this check
forbade many non-problematic situations as well. For example, it's
common for incoming argument lowering to add a non-aliasing load hanging
off of EntryNode. Then, if GatherAllAliases visited EntryNode, it would
find that other (unvisited) use of the EntryNode chain, and just give up
entirely. Furthermore, the check was incomplete: it would not actually
detect all such potentially problematic DAG constructions, because
GatherAllAliases did not guarantee to visit all chain nodes going up to
the root EntryNode. This is in general fine -- giving up early will just
miss a potential optimization, not generate incorrect results. But, for
this non-chain dependency detection code, it's possible that you could
have a load attached to a higher-up chain node than any which were
visited. If that load aliases your store, but the only dependency is
through the value operand of a non-aliasing store, it would've been
missed by this code, and potentially reordered.
With the dependence added, this check can be removed and Alias Analysis
can be much more aggressive. This fixes code quality regression in the
Consecutive Store Merge cleanup (D14834).
Test Change:
ppc64-align-long-double.ll now may see multiple serializations
of its stores
Differential Revision: http://reviews.llvm.org/D18062
llvm-svn: 265836
Summary:
The llvm cos intrinsic currently does not propagate undef's. This change
transforms cos(undef) to null value or 0.
There are 2 test cases added as well.
Patch by Anna Thomas!
Reviewers: sanjoy
Subscribers: majnemer, llvm-commits
Differential Revision: http://reviews.llvm.org/D18863
llvm-svn: 265825
This adds a conditional variant of CallJG instruction, CallBRCL.
It can be used for conditional sibling calls. Unfortunately, due
to IfCvt limitations, it only really works well for functions without
arguments.
Author: koriakin
Differential Revision: http://reviews.llvm.org/D18864
llvm-svn: 265814
We had a select of a cast of a select but attempted to replace the outer
select with the inner select dispite their incompatible types.
Patch by Anton Korobeynikov!
This fixes PR27236.
llvm-svn: 265805
InstCombine cannot effectively remove redundant assumptions without them
registered in the assumption cache. The vectorizer can create identical
assumptions but doesn't register them with the cache, resulting in
slower compile times because InstCombine tries to reason about a lot
more assumptions.
Fix this by registering the cloned assumptions.
llvm-svn: 265800
Added ISelDAGToDAG functions to enable selection of the smlawb, smlawt,
smulwb and smulwt instructions for the ARM backend. Also updated the smul
CodeGen test and removed the smulw one.
Differential Revision: http://reviews.llvm.org/D18892
llvm-svn: 265793
It caused PR27275: "ARM: Bad machine code: Using an undefined physical register"
Also reverting the following commits that were landed on top:
r265610 "Fix the compare-clang diff error introduced by r265547."
r265639 "Fix the sanitizer bootstrap error in r265547."
r265657 "InlineSpiller.cpp: Escap \@ in r265547. [-Wdocumentation]"
llvm-svn: 265790
This re-commits r265535 which was reverted in r265541 because it
broke the windows bots. The problem was that we had a PointerIntPair
which took a pointer to a struct allocated with new. The problem
was that new doesn't provide sufficient alignment guarantees.
This pattern was already present before r265535 and it just happened
to work. To fix this, we now separate the PointerToIntPair from the
ExitNotTakenInfo struct into a pointer and a bool.
Original commit message:
Summary:
When the backedge taken codition is computed from an icmp, SCEV can
deduce the backedge taken count only if one of the sides of the icmp
is an AddRecExpr. However, due to sign/zero extensions, we sometimes
end up with something that is not an AddRecExpr.
However, we can use SCEV predicates to produce a 'guarded' expression.
This change adds a method to SCEV to get this expression, and the
SCEV predicate associated with it.
In HowManyGreaterThans and HowManyLessThans we will now add a SCEV
predicate associated with the guarded backedge taken count when the
analyzed SCEV expression is not an AddRecExpr. Note that we only do
this as an alternative to returning a 'CouldNotCompute'.
We use new feature in Loop Access Analysis and LoopVectorize to analyze
and transform more loops.
Reviewers: anemet, mzolotukhin, hfinkel, sanjoy
Subscribers: flyingforyou, mcrosier, atrick, mssimpso, sanjoy, mzolotukhin, llvm-commits
Differential Revision: http://reviews.llvm.org/D17201
llvm-svn: 265786
This is the same change on PPC64 as r255821 on AArch64. I have even borrowed
his commit message.
The access function has a short entry and a short exit, the initialization
block is only run the first time. To improve the performance, we want to
have a short frame at the entry and exit.
We explicitly handle most of the CSRs via copies. Only the CSRs that are not
handled via copies will be in CSR_SaveList.
Frame lowering and prologue/epilogue insertion will generate a short frame
in the entry and exit according to CSR_SaveList. The majority of the CSRs will
be handled by register allcoator. Register allocator will try to spill and
reload them in the initialization block.
We add CSRsViaCopy, it will be explicitly handled during lowering.
1> we first set FunctionLoweringInfo->SplitCSR if conditions are met (the target
supports it for the given machine function and the function has only return
exits). We also call TLI->initializeSplitCSR to perform initialization.
2> we call TLI->insertCopiesSplitCSR to insert copies from CSRsViaCopy to
virtual registers at beginning of the entry block and copies from virtual
registers to CSRsViaCopy at beginning of the exit blocks.
3> we also need to make sure the explicit copies will not be eliminated.
Author: Tom Jablin (tjablin)
Reviewers: hfinkel kbarton cycheng
http://reviews.llvm.org/D17533
llvm-svn: 265781
It seems that llc cannot be called used in assembler tests so test that
checks asm for particular target needs to be moved to codegen.
llvm-svn: 265770
