Summary:
Patch https://reviews.llvm.org/D44467 implements conversion of invalid
vmov instructions into valid ones. It turned out that some valid
instructions also get converted, for example
vmov.i64 d2, #0xff00ff00ff00ff00 ->
vmov.i16 d2, #0xff00
Such behavior is incorrect because according to the ARM ARM section
F2.7.7 Modified immediate constants in T32 and A32 Advanced SIMD
instructions, "On assembly, the data type must be matched in the table
if possible."
This patch fixes the isNEONmovReplicate check so that the above
instruction is not modified any more.
Reviewers: rengolin, olista01
Reviewed By: rengolin
Subscribers: javed.absar, kristof.beyls, rogfer01, llvm-commits
Differential Revision: https://reviews.llvm.org/D44678
llvm-svn: 329158
Summary:
[llvm-exegesis][RFC] Automatic Measurement of Instruction Latency/Uops
This is the code corresponding to the RFC "llvm-exegesis Automatic Measurement of Instruction Latency/Uops".
The RFC is available on the LLVM mailing lists as well as the following document
for easier reading:
https://docs.google.com/document/d/1QidaJMJUyQdRrFKD66vE1_N55whe0coQ3h1GpFzz27M/edit?usp=sharing
Subscribers: mgorny, gchatelet, orwant, llvm-commits
Differential Revision: https://reviews.llvm.org/D44519
llvm-svn: 329156
These both use a 16-bit load, but one used loadi16_anyext and the other used extloadi32i16. The only difference between them is that loadi16_anyext checked that the load was at least 2 byte aligned and non-volatile. But the alignment doesn't matter here. Just use extloadi32i16 for both.
llvm-svn: 329154
This patch teaches SCEV how to prove implications for SCEVUnknown nodes that are Phis.
If we need to prove `Pred` for `LHS, RHS`, and `LHS` is a Phi with possible incoming values
`L1, L2, ..., LN`, then if we prove `Pred` for `(L1, RHS), (L2, RHS), ..., (LN, RHS)` then we can also
prove it for `(LHS, RHS)`. If both `LHS` and `RHS` are Phis from the same block, it is sufficient
to prove the predicate for values that come from the same predecessor block.
The typical case that it handles is that we sometimes need to prove that `Phi(Len, Len - 1) >= 0`
given that `Len > 0`. The new logic was added to `isImpliedViaOperations` and only uses it and
non-recursive reasoning to prove the facts we need, so it should not hurt compile time a lot.
Differential Revision: https://reviews.llvm.org/D44001
Reviewed By: anna
llvm-svn: 329150
Summary:
Currently merge conditional stores can't handle cases where PostBB (the block we need to move the store to) has more than 2 predecessors.
This patch removes that restriction by creating a new block with only the 2 predecessors we care about and an unconditional branch to the original block. This provides a place to put the store.
Reviewers: efriedma, jmolloy, ABataev
Reviewed By: efriedma
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D39760
llvm-svn: 329142
Summary:
The ShadowCallStack pass instruments functions marked with the
shadowcallstack attribute. The instrumented prolog saves the return
address to [gs:offset] where offset is stored and updated in [gs:0].
The instrumented epilog loads/updates the return address from [gs:0]
and checks that it matches the return address on the stack before
returning.
Reviewers: pcc, vitalybuka
Reviewed By: pcc
Subscribers: cryptoad, eugenis, craig.topper, mgorny, llvm-commits, kcc
Differential Revision: https://reviews.llvm.org/D44802
llvm-svn: 329139
This commit is similar to r329120, but uses the existing getUsesRedZone() function
in X86MachineFunctionInfo. This teaches the outliner to look at whether or not a
function *truly* uses a redzone instead of just the noredzone attribute on a
function.
Thus, after this commit, it's possible to outline from x86 without using
-mno-red-zone and still get outlining results.
This also adds a new test for the new redzone behaviour.
llvm-svn: 329134
Summary: There are no packed instructions for min3 or max3. So, performMinMaxCombine should not optimize vectors of f16 to min3/max3.
Author: FarhanaAleen
Reviewed By: arsenm
Subscribers: llvm-commits, AMDGPU
Differential Revision: https://reviews.llvm.org/D45219
llvm-svn: 329131
LLVM Bug Id : 36449
Revision 328563 caused tests to fail under python 3.
This patch modified cat.py file to support both python 2 and 3.
This patch also fixes CRLF issues on Windows.
Patch by Chamal de Silva
Differential Revision: https://reviews.llvm.org/D45077
llvm-svn: 329123
The tests marked with 'FIXME' require loosening the check
in SimplifyAssociativeOrCommutative() to optimize completely;
that's still checking isFast() in Instruction::isAssociative().
llvm-svn: 329121
This patch adds a hasRedZone() function to AArch64MachineFunctionInfo. It
returns true if the function is known to use a redzone, false if it is known
to not use a redzone, and no value otherwise.
This removes the requirement to pass -mno-red-zone when outlining for AArch64.
https://reviews.llvm.org/D45189
llvm-svn: 329120
The linkage type on outlined functions was private before. This meant that if
you set a breakpoint in an outlined function, the debugger wouldn't be able to
give a sane name to the outlined function.
This commit changes the linkage type to internal and updates any tests that
relied on the prefixes on the names of outlined functions.
llvm-svn: 329116
Summary:
If an alloca need to be stored in the coroutine frame and it has an alignment specified and the alignment does not match the natural alignment of the alloca type. Insert appropriate padding into the coroutine frame to make sure that it gets requested alignment.
For example for a packet type (which natural alignment is 1), but alloca alignment is 8, we may need to insert a padding field with required number of bytes to make sure it is properly aligned.
```
%PackedStruct = type <{ i64 }>
...
%data = alloca %PackedStruct, align 8
```
If the previous field in the coroutine frame had alignment 2, we would have [6 x i8] inserted before %PackedStruct in the coroutine frame:
```
%f.Frame = type { ..., i16, [6 x i8], %PackedStruct }
```
Reviewers: rnk, lewissbaker, modocache
Reviewed By: modocache
Subscribers: EricWF, llvm-commits
Differential Revision: https://reviews.llvm.org/D45221
llvm-svn: 329112
It also updates test/Transforms/LoopInterchange/call-instructions.ll
to use accesses where we can prove dependence after D35430.
Reviewers: sebpop, karthikthecool, blitz.opensource
Reviewed By: sebpop
Differential Revision: https://reviews.llvm.org/D45206
llvm-svn: 329111
Summary:
Introduce the ShadowCallStack function attribute. It's added to
functions compiled with -fsanitize=shadow-call-stack in order to mark
functions to be instrumented by a ShadowCallStack pass to be submitted
in a separate change.
Reviewers: pcc, kcc, kubamracek
Reviewed By: pcc, kcc
Subscribers: cryptoad, mehdi_amini, javed.absar, llvm-commits, kcc
Differential Revision: https://reviews.llvm.org/D44800
llvm-svn: 329108
The missing definitions are from cvconst.h shipped with DIA SDK.
Correct the url to MSDN for MemoryTypeEnum and set the underlying
type of PDB_StackFrameType and PDB_MemoryType to uint16_t.
llvm-svn: 329104
We don't constant fold any of these, but we could...but if we
do, we must produce the right answer.
Unlike the IR fptosi instruction or its DAG node counterpart
ISD::FP_TO_SINT, these are not undef for an out-of-range input.
llvm-svn: 329100
Summary:
This change declare that PostRAMachineSinking and ShrinkWrap require NoVRegs
property, so now the MachineFunctionPass can enforce this check.
These passes are disabled in NVPTX & WebAssembly.
Reviewers: dschuff, jlebar, tra, jgravelle-google, MatzeB, sebpop, thegameg, mcrosier
Reviewed By: dschuff, thegameg
Subscribers: jholewinski, jfb, sbc100, aheejin, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D45183
llvm-svn: 329095
The DwarfLinker can have some very deep recursion that can max out the
(significantly smaller) stack when using threads. We don't want this
limitation when we only have a single thread. We already have this
workaround for the architecture-related threading. This patch applies
the same workaround to the parallel analysis and cloning.
Differential revision: https://reviews.llvm.org/D45172
llvm-svn: 329093
Summary:
Some targets do not support extended format of .loc directive and
support only simple format: .loc <FileID> <Line> <Column>. Patch adds
MCAsmInfo flag and option that allows emit .loc directive without
additional flags.
Reviewers: echristo
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45184
llvm-svn: 329089
Summary:
Folding patterns like:
%vec = shufflevector <4 x i8> %insvec, <4 x i8> undef, <4 x i32> zeroinitializer
%cast = bitcast <4 x i8> %vec to i32
%cond = icmp eq i32 %cast, 0
into:
%ext = extractelement <4 x i8> %insvec, i32 0
%cond = icmp eq i32 %ext, 0
Combined with existing rules, this allows us to fold patterns like:
%insvec = insertelement <4 x i8> undef, i8 %val, i32 0
%vec = shufflevector <4 x i8> %insvec, <4 x i8> undef, <4 x i32> zeroinitializer
%cast = bitcast <4 x i8> %vec to i32
%cond = icmp eq i32 %cast, 0
into:
%cond = icmp eq i8 %val, 0
When we construct a splat vector via a shuffle, and bitcast the vector into an integer type for comparison against an integer constant. Then we can simplify the the comparison to compare the splatted value against the integer constant.
Reviewers: spatel, anna, mkazantsev
Reviewed By: spatel
Subscribers: efriedma, rengolin, llvm-commits
Differential Revision: https://reviews.llvm.org/D44997
llvm-svn: 329087
Summary:
If the load/extractelement/extractvalue instructions are not originally
consecutive, the SLP vectorizer is unable to vectorize them. Patch
allows reordering of such instructions.
Patch does not support reordering of the repeated instruction, this must
be handled in the separate patch.
Reviewers: RKSimon, spatel, hfinkel, mkuper, Ayal, ashahid
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D43776
llvm-svn: 329085
Before this patch, the "BackendStatistics" view was responsible for printing the
register file usage (as well as many other statistics).
Now users can enable register file usage statistics using the command line flag
`-register-file-stats`. By default, the tool doesn't print register file
statistics.
llvm-svn: 329083
The primary issue here is that using NDEBUG alone isn't enough to guard
debug printing -- instead the DEBUG() macro needs to be used so that the
specific pass debug logging check is employed. Without this, every
asserts-enabled build was printing out information when it hit this.
I also fixed another place where we had multiple statements in a DEBUG
macro to use {}s to be a bit cleaner. And I fixed a place that used
errs() rather than dbgs().
llvm-svn: 329082
I have taken the opportunity to simplify some tests slightly and move
parts around.
It also brings back a few IR checks for interchangable loops.
Reviewers: karthikthecool, sebpop, grosser
Reviewed By: sebpop
Differential Revision: https://reviews.llvm.org/D45207
llvm-svn: 329081
