On targets like Arm some relaxations may only be performed when certain
architectural features are available. As functions can be compiled with
differing levels of architectural support we must make a judgement on
whether we can relax based on the MCSubtargetInfo for the function. This
change passes through the MCSubtargetInfo for the function to
fixupNeedsRelaxation so that the decision on whether to relax can be made
per function. In this patch, only the ARM backend makes use of this
information. We must also pass the MCSubtargetInfo to applyFixup because
some fixups skip error checking on the assumption that relaxation has
occurred, to prevent code-generation errors applyFixup must see the same
MCSubtargetInfo as fixupNeedsRelaxation.
Differential Revision: https://reviews.llvm.org/D44928
llvm-svn: 334078
When the branch target of a Thumb2 unconditional or conditonal branch is
resolved at assembly time, no range checking is performed on the result
leading to incorrect immediates. This change adds a range check:
+- 16 Megabytes for unconditional branches, +- 1 Megabyte for the
conditional branch.
Differential Revision: https://reviews.llvm.org/D46306
llvm-svn: 333997
The Thumb BL range is + or - either 16 Megabytes or 4 Megabytes depending
on whether the CPU supports Thumb2 or the v8-m baseline ops. The existing
check for BL range is incorrectly set at +- 32 Megabytes. This change
corrects the higher range and uses the lower range if the featurebits
don't have the necessary support for it.
Differential Revision: https://reviews.llvm.org/D46305
llvm-svn: 333991
With this we gain a little flexibility in how the generic object
writer is created.
Part of PR37466.
Differential Revision: https://reviews.llvm.org/D47045
llvm-svn: 332868
To make this work I needed to add an endianness field to MCAsmBackend
so that writeNopData() implementations know which endianness to use.
Part of PR37466.
Differential Revision: https://reviews.llvm.org/D47035
llvm-svn: 332857
The idea is that a client that wants split dwarf would create a
specific kind of object writer that creates two files, and use it to
create the streamer.
Part of PR37466.
Differential Revision: https://reviews.llvm.org/D47050
llvm-svn: 332749
Inspired by r331508, I did a grep and found these.
Mostly just change from dyn_cast to cast. Some cases also showed a dyn_cast result being converted to bool, so those I changed to isa.
llvm-svn: 331577
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46290
llvm-svn: 331272
Summary:
r327219 added wrappers to std::sort which randomly shuffle the container before sorting.
This will help in uncovering non-determinism caused due to undefined sorting
order of objects having the same key.
To make use of that infrastructure we need to invoke llvm::sort instead of std::sort.
Note: This patch is one of a series of patches to replace *all* std::sort to llvm::sort.
Refer the comments section in D44363 for a list of all the required patches.
Reviewers: t.p.northover, RKSimon, MatzeB, bkramer
Reviewed By: bkramer
Subscribers: javed.absar, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D44855
llvm-svn: 329329
This is the groundwork for Armv8.2-A FP16 code generation .
Clang passes and returns _Float16 values as floats, together with the required
bitconverts and truncs etc. to implement correct AAPCS behaviour, see D42318.
We will implement half-precision argument passing/returning lowering in the ARM
backend soon, but for now this means that this:
_Float16 sub(_Float16 a, _Float16 b) {
return a + b;
}
gets lowered to this:
define float @sub(float %a.coerce, float %b.coerce) {
entry:
%0 = bitcast float %a.coerce to i32
%tmp.0.extract.trunc = trunc i32 %0 to i16
%1 = bitcast i16 %tmp.0.extract.trunc to half
<SNIP>
%add = fadd half %1, %3
<SNIP>
}
When FullFP16 is *not* supported, we don't make f16 a legal type, and we get
legalization for "free", i.e. nothing changes and everything works as before.
And also f16 argument passing/returning is handled.
When FullFP16 is supported, we do make f16 a legal type, and have 2 places that
we need to patch up: f16 argument passing and returning, which involves minor
tweaks to avoid unnecessary code generation for some bitcasts.
As a "demonstrator" that this works for the different FP16, FullFP16, softfp
modes, etc., I've added match rules to the VSUB instruction description showing
that we can codegen this instruction from IR, but more importantly, also to
some conversion instructions. These conversions were causing issue before in
the FP16 and FullFP16 cases.
I've also added match rules to the VLDRH and VSTRH desriptions, so that we can
actually compile the entire half-precision sub code example above. This showed
that these loads and stores had the wrong addressing mode specified: AddrMode5
instead of AddrMode5FP16, which turned out not be implemented at all, so that
has also been added.
This is the minimal patch that shows all the different moving parts. In patch
2/3 I will add some efficient lowering of bitcasts, and in 2/3 I will add the
remaining Armv8.2-A FP16 instruction descriptions.
Thanks to Sam Parker and Oliver Stannard for their help and reviews!
Differential Revision: https://reviews.llvm.org/D38315
llvm-svn: 323512
Wide Thumb2 instructions should be emitted into the object file as pairs of
16-bit words of the appropriate endianness, not one 32-bit word.
Differential revision: https://reviews.llvm.org/D41185
llvm-svn: 321799
After D41349, we can now directly access MCSubtargetInfo from
createARM*AsmBackend. This patch makes use of this, avoiding the need to
create a fresh MCSubtargetInfo (which was previously always done with a blank
CPU and feature string). Given the total size of the change remains pretty
tiny and we're removing the old explicit destructor, I changed the STI field
to a reference rather than a pointer.
Differential Revision: https://reviews.llvm.org/D41693
llvm-svn: 321707
Currently it's not possible to access MCSubtargetInfo from a TgtMCAsmBackend.
D20830 threaded an MCSubtargetInfo reference through
MCAsmBackend::relaxInstruction, but this isn't the only function that would
benefit from access. This patch removes the Triple and CPUString arguments
from createMCAsmBackend and replaces them with MCSubtargetInfo.
This patch just changes the interface without making any intentional
functional changes. Once in, several cleanups are possible:
* Get rid of the awkward MCSubtargetInfo handling in ARMAsmBackend
* Support 16-bit instructions when valid in MipsAsmBackend::writeNopData
* Get rid of the CPU string parsing in X86AsmBackend and just use a SubtargetFeature for HasNopl
* Emit 16-bit nops in RISCVAsmBackend::writeNopData if the compressed instruction set extension is enabled (see D41221)
This change initially exposed PR35686, which has since been resolved in r321026.
Differential Revision: https://reviews.llvm.org/D41349
llvm-svn: 321692
This will allow compilation of assembly files targeting armv7e-m without having
to specify the Tag_CPU_arch attribute as a workaround.
Differential revision: https://reviews.llvm.org/D40370
Patch by Ian Tessier!
llvm-svn: 319303
Enabling and using dwarf exceptions seems like an easier path
to take, than to make the COFF/ARM backend output EHABI directives.
Previously, no EH model was enabled at all on this target.
There's no point in setting UseIntegratedAssembler to false since
GNU binutils doesn't support Windows on ARM, and since we don't
need to support external assembler, we don't need to use register
numbers in cfi directives.
Differential Revision: https://reviews.llvm.org/D39532
llvm-svn: 318510
Summary:
This fixes PR35221.
Use pseudo-instructions to let MachineCSE hoist global address computation.
Subscribers: aemerson, javed.absar, kristof.beyls, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D39871
llvm-svn: 318081
Summary:
This causes a segfault on ARM when (I think) the pass manager is used multiple times.
Reset set the (last) current section to NULL without saving the corresponding LastEMSInfo back into the map. The next use of the streamer then save the LastEMSInfo for the NULL section leaving the LastEMSInfo mapping for the last current section (the one that was there before the reset) NULL which cause the LastEMSInfo to be set to NULL when the section is being used again.
The reuse of the section (pointer) might mean that the map was holding dangling pointers previously which is why I went for clearing the map and resetting the info, making it as similar to the state right after the constructor run as possible. The AArch64 one doesn't have segfault (since LastEMS isn't a pointer) but it seems to have the same issue.
The segfault is likely caused by https://reviews.llvm.org/D30724 which turns LastEMSInfo into a pointer. As mentioned above, it seems that the actual issue was older though.
No test is included since the test is believed to be too complicated for such an obvious fix and not worth doing.
Reviewers: llvm-commits, shankare, t.p.northover, peter.smith, rengolin
Reviewed By: rengolin
Subscribers: mgorny, aemerson, rengolin, javed.absar, kristof.beyls
Differential Revision: https://reviews.llvm.org/D38588
llvm-svn: 316679
MCObjectStreamer owns its MCCodeEmitter -- this fixes the types to reflect that,
and allows us to remove the last instance of MCObjectStreamer's weird "holding
ownership via someone else's reference" trick.
llvm-svn: 315531
MCObjectStreamer owns its MCAsmBackend -- this fixes the types to reflect that,
and allows us to remove another instance of MCObjectStreamer's weird "holding
ownership via someone else's reference" trick.
llvm-svn: 315410
functions.
This makes the ownership of the resulting MCObjectWriter clear, and allows us
to remove one instance of MCObjectStreamer's bizarre "holding ownership via
someone else's reference" trick.
llvm-svn: 315327
createWinCOFFObjectWriter to WinCOFFObjectWriter's constructor.
Fixes the same ownership issue for COFF that r315245 did for MachO:
WinCOFFObjectWriter takes ownership of its MCWinCOFFObjectTargetWriter, so we
want to pass this through to the constructor via a unique_ptr, rather than a
raw ptr.
llvm-svn: 315257
ELFObjectWriter's constructor.
Fixes the same ownership issue for ELF that r315245 did for MachO:
ELFObjectWriter takes ownership of its MCELFObjectTargetWriter, so we want to
pass this through to the constructor via a unique_ptr, rather than a raw ptr.
llvm-svn: 315254
to MCObjectWriter's constructor.
MCObjectWriter takes ownership of its MCMachObjectTargetWriter argument -- this
patch plumbs that ownership relationship through the constructor (which
previously took raw MCMachObjectTargetWriter*) and the createMachObjectWriter
function.
llvm-svn: 315245
New instructions are added to AArch32 and AArch64 to aid
floating-point multiplication and addition of complex numbers, where
the complex numbers are packed in a vector register as a pair of
elements. The Imaginary part of the number is placed in the more
significant element, and the Real part of the number is placed in the
less significant element.
This patch adds assembler for the ARM target.
Differential Revision: https://reviews.llvm.org/D36789
llvm-svn: 314511
ARMv4 doesn't support the "BX" instruction, which has been introduced
with ARMv4t. Adjust the call lowering and tail call implementation
accordingly.
Further changes are necessary to ensure that presence of the v4t feature
is correctly set. Most importantly, the "generic" CPU for thumb-*
triples should include ARMv4t, since thumb mode without thumb support
would naturally be pointless.
Add a couple of asserts to ensure thumb instructions are not emitted
without CPU support.
Differential Revision: https://reviews.llvm.org/D37030
llvm-svn: 311921
Switching to external relocations for ARM-mode branches (to allow Thumb
interworking when the offset is unencodable) causes calls to temporary symbols
to be miscompiled and instead go to the parent externally visible symbol.
Calling a temporary never happens in compiled code, but can occasionally in
hand-written assembly.
llvm-svn: 311611
Summary:
isThumb returns true for Thumb triples (little and big endian), isARM
returns true for ARM triples (little and big endian).
There are a few more checks using arm/thumb that are not covered by
those functions, e.g. that the architecture is either ARM or Thumb
(little endian) or ARM/Thumb little endian only.
Reviewers: javed.absar, rengolin, kristof.beyls, t.p.northover
Reviewed By: rengolin
Subscribers: llvm-commits, aemerson
Differential Revision: https://reviews.llvm.org/D34682
llvm-svn: 310781
Summary:
Using c++11 enum classes ensures that only valid enum values are used
for ArchKind, ProfileKind, VersionKind and ISAKind. This removes the
need for checks that the provided values map to a proper enum value,
allows us to get rid of AK_LAST and prevents comparing values from
different enums. It also removes a bunch of static_cast
from unsigned to enum values and vice versa, at the cost of introducing
static casts to access AArch64ARCHNames and ARMARCHNames by ArchKind.
FPUKind and ArchExtKind are the only remaining old-style enum in
TargetParser.h. I think it's beneficial to keep ArchExtKind as old-style
enum, but FPUKind can be converted too, but this patch is quite big, so
could do this in a follow-up patch. I could also split this patch up a
bit, if people would prefer that.
Reviewers: rengolin, javed.absar, chandlerc, rovka
Reviewed By: rovka
Subscribers: aemerson, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D35882
llvm-svn: 309287
The issue is not if the value is pcrel. It is whether we have a
relocation or not.
If we have a relocation, the static linker will select the upper
bits. If we don't have a relocation, we have to do it.
llvm-svn: 307730
For ELF, a movw+movt pair is handled as two separate relocations.
If an offset should be applied to the symbol address, this offset is
stored as an immediate in the instruction (as opposed to stored as an
offset in the relocation itself).
Even though the actual value stored in the movt immediate after linking
is the top half of the value, we need to store the unshifted offset
prior to linking. When the relocation is made during linking, the offset
gets added to the target symbol value, and the upper half of the value
is stored in the instruction.
This makes sure that movw+movt with offset symbols get properly
handled, in case the offset addition in the lower half should be
carried over to the upper half.
This makes the output from the additions to the test case match
the output from GNU binutils.
For COFF and MachO, the movw/movt relocations are handled as a pair,
and the overflow from the lower half gets carried over to the movt,
so they should keep the shifted offset just as before.
Differential Revision: https://reviews.llvm.org/D35242
llvm-svn: 307713
processFixupValue is called on every relaxation iteration. applyFixup
is only called once at the very end. applyFixup is then the correct
place to do last minute changes and value checks.
While here, do proper range checks again for fixup_arm_thumb_bl. We
used to do it, but dropped because of thumb2. We now do it again, but
use the thumb2 range.
llvm-svn: 306177
