This more efficient for the isel table generator since we can use CheckChildInteger instead of MoveChild, CheckPredicate, MoveParent. This reduced the table size by 1-2K.
I wish there was a way to share the values with X86BaseInfo.h and still use a PatFrag like this. These numbers are fixed by the X86 intrinsic spec going back many years and we should never need to change them. So we shouldn't waste table bytes to support sharing.
llvm-svn: 335806
BMI2 added new shift by register instructions that have the ability to fold a load.
Normally without doing anything special isel would prefer folding a load over folding an immediate because the load folding pattern has higher "complexity". This would require an instruction to move the immediate into a register. We would rather fold the immediate instead and have a separate instruction for the load.
We used to enforce this priority by artificially lowering the complexity of the load pattern.
This patch changes this to instead reject the load fold in isProfitableToFoldLoad if there is an immediate. This is more consistent with other binops and feels less hacky.
llvm-svn: 335804
=== Generating the CG Profile ===
The CGProfile module pass simply gets the block profile count for each BB and scans for call instructions. For each call instruction it adds an edge from the current function to the called function with the current BB block profile count as the weight.
After scanning all the functions, it generates an appending module flag containing the data. The format looks like:
```
!llvm.module.flags = !{!0}
!0 = !{i32 5, !"CG Profile", !1}
!1 = !{!2, !3, !4} ; List of edges
!2 = !{void ()* @a, void ()* @b, i64 32} ; Edge from a to b with a weight of 32
!3 = !{void (i1)* @freq, void ()* @a, i64 11}
!4 = !{void (i1)* @freq, void ()* @b, i64 20}
```
Differential Revision: https://reviews.llvm.org/D48105
llvm-svn: 335794
The code to emit the pieces of the MSF file were actually in
PDBFileBuilder. Move this to MSFBuilder so that we can
theoretically emit an MSF without having a PDB file.
llvm-svn: 335789
If we turn X86ISD::AND into ISD::AND, we delete N. But we were continuing onto the next block of code even though N no longer existed.
Just happened to notice it. I assume asan didn't notice it because we explicitly unpoison deleted nodes and give them a DELETE_NODE opcode.
llvm-svn: 335787
Summary:
In r333455 we added a peephole to fix the corner cases that result
from separating base + offset lowering of global address.The
peephole didn't handle some of the cases because it only has a basic
block view instead of a function level view.
This patch replaces that logic with a machine function pass. In
addition to handling the original cases it handles uses of the global
address across blocks in function and folding an offset from LW\SW
instruction. This pass won't run for OptNone compilation, so there
will be a negative impact overall vs the old approach at O0.
Reviewers: asb, apazos, mgrang
Reviewed By: asb
Subscribers: MartinMosbeck, brucehoult, the_o, rogfer01, mgorny, rbar, johnrusso, simoncook, niosHD, kito-cheng, shiva0217, zzheng, llvm-commits, edward-jones
Differential Revision: https://reviews.llvm.org/D47857
llvm-svn: 335786
Summary:
The instantiation of the drop_begin function template usually fails because the functions begin() and end() do not exist. Only when using on a container from the std namespace (or `llvm::iterator_range`s of something derived from `std::iterator`), they are matched to std::begin() and std::end() due to Koenig-lookup.
Explicitly use llvm::adl_begin and llvm::adl_end to make drop_begin applicable to anything iterable (including C-style arrays).
A solution for general `llvm::iterator_range`s was already tried in r244620, but got reverted in r244621 due to MSVC not liking it.
Reviewers: dblaikie, grosbach, aaron.ballman, ruiu
Reviewed By: dblaikie, aaron.ballman
Subscribers: aaron.ballman, llvm-commits
Differential Revision: https://reviews.llvm.org/D48598
llvm-svn: 335772
The %eiz/%riz are dummy registers that force the encoder to emit a SIB byte when it normally wouldn't. By emitting them in the disassembly output we ensure that assembling the disassembler output would also produce a SIB byte.
This should match the behavior of objdump from binutils.
llvm-svn: 335768
Now that we have the ability to legalize based on MMO's. Add support for
legalizing based on AtomicOrdering and use it to correct the legalization
of the atomic instructions.
Also extend all() to be a variadic template as this ruleset now requires
3 and 4 argument versions.
llvm-svn: 335767
Fix test changes added in r335760. Even though we are invoking llvm-lto2
in single threaded mode, the order of processing the modules in the
backend is apparently not deterministic. Handle the expected debug
messages in any order. (The determinism would be good to fix, but not
related to this change.)
This also undoes the change I made in r335764 to help debug this.
llvm-svn: 335766
I am getting bot failures from r335760 that are difficult to diagnose
since the stderr is getting redirected to FileCheck. Save and dump the
debug output to stderr to help debug the issue.
llvm-svn: 335764
As noted in the D44909 review, the transform from (fptosi+sitofp) to ftrunc
can produce -0.0 where the original code does not:
#include <stdio.h>
int main(int argc) {
float x;
x = -0.8 * argc;
printf("%f\n", (float)((int)x));
return 0;
}
$ clang -O0 -mavx fp.c ; ./a.out
0.000000
$ clang -O1 -mavx fp.c ; ./a.out
-0.000000
Ideally, we'd use IR/node flags to predicate the transform, but the IR parser
doesn't currently allow fast-math-flags on the cast instructions. So for now,
just use the function attribute that corresponds to clang's "-fno-signed-zeros"
option.
Differential Revision: https://reviews.llvm.org/D48085
llvm-svn: 335761
Summary:
Rather than just print the GUID, when it is available in the index,
print the global name as well in the function import thin link debug
messages. Names will be available when the combined index is being
built by the same process, e.g. a linker or "llvm-lto2 run".
Reviewers: davidxl
Subscribers: mehdi_amini, inglorion, eraman, steven_wu, llvm-commits
Differential Revision: https://reviews.llvm.org/D48612
llvm-svn: 335760
If you've already loaded an IRObjectFile and need access to the
Modules themselves you shouldn't have to reparse a byte stream to do
it. Adds an accessor for the modules in IRObjectFile.
llvm-svn: 335759
It isn't safe to outline sequences of instructions where x16/x17/nzcv live
across the sequence.
This teaches the outliner to check whether or not a specific canidate has
x16/x17/nzcv live across it and discard the candidate in the case that that is
true.
https://bugs.llvm.org/show_bug.cgi?id=37573https://reviews.llvm.org/D47655
llvm-svn: 335758
If we are just modifying a single bit at a variable bit position we can use the BT* instructions to make the change instead of shifting a 1(or rotating a -1) and doing a binop. These instruction also ignore the upper bits of their index input so we can also remove an and if one is present on the index.
Fixes PR37938.
llvm-svn: 335754
Summary:
AliasSet::print uses `I->printAsOperand` to print UnknownInstructions. The problem is that not all UnknownInstructions have names (e.g. call instructions). When such instructions are printed, they appear as `<badref>` in AliasSets, which is very confusing, as the values are perfectly valid.
This patch fixes that by printing UnknownInstructions without a name using `print` instead of `printAsOperand`.
Reviewers: asbirlea, chandlerc, sanjoy, grosser
Reviewed By: asbirlea
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D48609
llvm-svn: 335751
This patch splits off some abstractions used by dsymutil's dwarf linker
and moves them into separate header and implementation files. This
almost halves the number of LOC in DwarfLinker.cpp and makes it a lot
easier to understand what functionality lives where.
Differential revision: https://reviews.llvm.org/D48647
llvm-svn: 335749
Summary:
This patch removes a few callbacks from Pipeline. It comes at the cost of
registering Listeners with all Stages. Not all stages need listeners or issue
callbacks, this registration is a bit redundant. However, as we build-out the
API, this redundancy can disappear.
The main purpose here is to move callback code from the Pipeline and into the
stages that actually issue those callbacks. This removes the back-pointer to
the Pipeline that was put into a few Stage subclasses.
Reviewers: andreadb, courbet, RKSimon
Reviewed By: andreadb, courbet
Subscribers: tschuett, gbedwell, llvm-commits
Differential Revision: https://reviews.llvm.org/D48576
llvm-svn: 335748
I think the intrinsics named 'avx512.mask.' should refer to the previous behavior of taking a mask argument in the intrinsic instead of using a 'select' or 'and' instruction in IR to accomplish the masking. This is more consistent with the goal that eventually we will have no intrinsics that have masking builtin. When we reach that goal, we should have no intrinsics named "avx512.mask".
llvm-svn: 335744
If a source of rcp instruction is a result of any conversion from
an integer convert it into rcp_iflag instruction. No FP exception
can ever happen except division by zero if a single precision rcp
argument is a representation of an integral number.
Differential Revision: https://reviews.llvm.org/D48569
llvm-svn: 335742
This patch adds a custom trunc store lowering for v4i8 vector types.
Since there is not v.4b register, the v4i8 is promoted to v4i16 (v.4h)
and default action for v4i8 is to extract each element and issue 4
byte stores.
A better strategy would be to extended the promoted v4i16 to v8i16
(with undef elements) and extract and store the word lane which
represents the v4i8 subvectores. The construction:
define void @foo(<4 x i16> %x, i8* nocapture %p) {
%0 = trunc <4 x i16> %x to <4 x i8>
%1 = bitcast i8* %p to <4 x i8>*
store <4 x i8> %0, <4 x i8>* %1, align 4, !tbaa !2
ret void
}
Can be optimized from:
umov w8, v0.h[3]
umov w9, v0.h[2]
umov w10, v0.h[1]
umov w11, v0.h[0]
strb w8, [x0, #3]
strb w9, [x0, #2]
strb w10, [x0, #1]
strb w11, [x0]
ret
To:
xtn v0.8b, v0.8h
str s0, [x0]
ret
The patch also adjust the memory cost for autovectorization, so the C
code:
void foo (const int *src, int width, unsigned char *dst)
{
for (int i = 0; i < width; i++)
*dst++ = *src++;
}
can be vectorized to:
.LBB0_4: // %vector.body
// =>This Inner Loop Header: Depth=1
ldr q0, [x0], #16
subs x12, x12, #4 // =4
xtn v0.4h, v0.4s
xtn v0.8b, v0.8h
st1 { v0.s }[0], [x2], #4
b.ne .LBB0_4
Instead of byte operations.
llvm-svn: 335735
This patch adds support for the q versions of the dup
(load-to-all-lanes) NEON intrinsics, such as vld2q_dup_f16() for
example.
Currently, non-q versions of the dup intrinsics are implemented
in clang by generating IR that first loads the elements of the
structure into the first lane with the lane (to-single-lane)
intrinsics, and then propagating it other lanes. There are at
least two problems with this approach. First, there are no
double-spaced to-single-lane byte-element instructions. For
example, there is no such instruction as 'vld2.8 { d0[0], d2[0]
}, [r0]'. That means we cannot rely on the to-single-lane
intrinsics and instructions to implement the q versions of the
dup intrinsics. Note that to-all-lanes instructions do support
all sizes of data items, including bytes.
The second problem with the current approach is that we need a
separate vdup instruction to propagate the structure to each
lane. So for vld4q_dup_f16() we would need four vdup instructions
in addition to the initial vld instruction.
This patch introduces dup LLVM intrinsics and reworks handling of
the currently supported (non-q) NEON dup intrinsics to expand
them into those LLVM intrinsics, thus eliminating the need for
using to-single-lane intrinsics and instructions.
Additionally, this patch adds support for u64 and s64 dup NEON
intrinsics. These are marked as Arch64-only in the ARM NEON
Reference, but it seems there are no reasons to not support them
in AArch32 mode. Please correct, if that is wrong.
That's what we generate with this patch applied:
vld2q_dup_f16:
vld2.16 {d0[], d2[]}, [r0]
vld2.16 {d1[], d3[]}, [r0]
vld3q_dup_f16:
vld3.16 {d0[], d2[], d4[]}, [r0]
vld3.16 {d1[], d3[], d5[]}, [r0]
vld4q_dup_f16:
vld4.16 {d0[], d2[], d4[], d6[]}, [r0]
vld4.16 {d1[], d3[], d5[], d7[]}, [r0]
Differential Revision: https://reviews.llvm.org/D48439
llvm-svn: 335733
When promoting instructions from the wait queue to the ready queue, we should
check if an instruction has already reached the IS_READY state before
calling method update().
llvm-svn: 335722
https://reviews.llvm.org/D47566
Change wording from "Must be backwards compatible" to
"Must match hardware definition" for enums that are
defined by hardware.
llvm-svn: 335705