Summary:
This is a fix to bug 41052:
https://bugs.llvm.org/show_bug.cgi?id=41052
While trying to optimize a memory instruction in a dead basic block, we end up registering the same phi for replacement twice. This patch avoids registering more than the first replacement candidate for a phi.
Patch by: JesperAntonsson
Reviewers: skatkov, aprantl
Reviewed By: aprantl
Subscribers: jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59358
llvm-svn: 356260
Summary:
- During the fixing of SGPR copying from VGPR, ensure users of SCC is
properly propagated, i.e.
* only propagate through live def of SCC,
* skip the SCC-def inst itself, and
* stop the propagation on the other SCC-def inst after checking its
SCC-use first.
Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59362
llvm-svn: 356258
We are adding a sign extended IR value to an int64_t, which can cause
signed overflows, as in the attached test case, where we have a formula
with BaseOffset = -1 and a constant with numeric_limits<int64_t>::min().
If the addition would overflow, skip the simplification for this
formula. Note that the target triple is required to trigger the failure.
Reviewers: qcolombet, gilr, kparzysz, efriedma
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D59211
llvm-svn: 356256
yaml2obj currently derives the p_filesz, p_memsz, and p_offset values of
program headers from their sections. This makes writing tests for
certain formats more complex, and sometimes impossible. This patch
allows setting these fields explicitly, overriding the default value,
when relevant.
Reviewed by: jakehehrlich, Higuoxing
Differential Revision: https://reviews.llvm.org/D59372
llvm-svn: 356247
Bail early when we don't have a preheader and also if the target is
big endian because it's written with only little endian in mind!
Differential Revision: https://reviews.llvm.org/D59368
llvm-svn: 356243
Certain 32 bit constants can be generated with a single instruction
instead of two. Implement materialize32BitImm function for MIPS32.
Differential Revision: https://reviews.llvm.org/D59369
llvm-svn: 356238
The kernel currently has a limit for # of types to be 64KB and
the size of string subsection to be 64KB. A simple bcc tool
runqlat.py generates:
. the size of ~33KB type section, roughly ~10K types
. the size of ~17KB string section
The majority type is from the types referenced by local
variables in the bpf program. For example, the kernel "task_struct"
itself recursively brings in ~900 other types.
This patch did the following optimization to avoid generating
unused types:
. do not generate types for local variables unless they are
function arguments.
. do not generate types for external globals.
If an external global is not used in the program, llvm
already removes it from IR, so global variable saving is
typical small. For runqlat.py, only one variable "llvm.used"
is the external global.
The types for locals and external globals can be added back
once there is a usage for them.
After the above optimization, the runqlat.py generates:
. the size of ~1.5KB type section, roughtly 500 types
. the size of ~0.7KB string section
UPDATE:
resubmitted the patch after previous revert with
the following fix:
use Global.hasExternalLinkage() to test "external"
linkage instead of using Global.getInitializer(),
which will assert on external variables.
Signed-off-by: Yonghong Song <yhs@fb.com>
llvm-svn: 356234
The kernel currently has a limit for # of types to be 64KB and
the size of string subsection to be 64KB. A simple bcc tool
runqlat.py generates:
. the size of ~33KB type section, roughly ~10K types
. the size of ~17KB string section
The majority type is from the types referenced by local
variables in the bpf program. For example, the kernel "task_struct"
itself recursively brings in ~900 other types.
This patch did the following optimization to avoid generating
unused types:
. do not generate types for local variables unless they are
function arguments.
. do not generate types for external globals.
If an external global is not used in the program, llvm
already removes it from IR, so global variable saving is
typical small. For runqlat.py, only one variable "llvm.used"
is the external global.
The types for locals and external globals can be added back
once there is a usage for them.
After the above optimization, the runqlat.py generates:
. the size of ~1.5KB type section, roughtly 500 types
. the size of ~0.7KB string section
Signed-off-by: Yonghong Song <yhs@fb.com>
llvm-svn: 356232
Before r355981, this was under LLVM_DEBUG. I don't think the assert is
quite right, but this really should be a verifier check. Instcombine
should not be asserting on this sort of thing.
llvm-svn: 356219
This is almost the same as:
rL355345
...and should prevent any potential crashing from examples like:
https://bugs.llvm.org/show_bug.cgi?id=41064
...although the bug was masked by:
rL355823
...and I'm not sure how to repro the problem after that change.
llvm-svn: 356218
These now verify that a given instruction has a specific source
location, rather than any old location. We want to make sure we
propagate the correct locations from one instruction to another.
llvm-svn: 356217
This isn't necessary according to the DWARF standard, but it matches the
.eh_frame sections emitted by other tools in practice, and the Android
libunwindstack rejects .eh_frame sections where an FDE refers to a CIE
other than the closest previous CIE. So match the other tools and also
sort accordingly.
I consider this a bug in libunwindstack, but it's easy enough to emit
a compatible .eh_frame section for compatibility with installed
operating systems.
Differential Revision: https://reviews.llvm.org/D58266
llvm-svn: 356216
This has been a very painful missing feature that has made producing
reduced testcases difficult. In particular the various registers
determined for stack access during function lowering were necessary to
avoid undefined register errors in a large percentage of
cases. Implement a subset of the important fields that need to be
preserved for AMDGPU.
Most of the changes are to support targets parsing register fields and
properly reporting errors. The biggest sort-of bug remaining is for
fields that can be initialized from the IR section will be overwritten
by a default initialized machineFunctionInfo section. Another
remaining bug is the machineFunctionInfo section is still printed even
if empty.
llvm-svn: 356215
This adds instruction selection support for G_UADDO on s32s and s64s.
Also
- Add an instruction selection test
- Update the arm64-xaluo.ll test to show that we generate the correct assembly
Differential Revision: https://reviews.llvm.org/D58734
llvm-svn: 356214
This re-uses the previous support for extract vector elt to extract the
subvectors.
Differential Revision: https://reviews.llvm.org/D59390
llvm-svn: 356213
For ELF, we accept but ignore --only-keep-debug. Do the same for llvm-strip.
COFF does implement this, so update the test that it is supported.
llvm-svn: 356207
On ARC ISA, general format of load instruction is this:
LD<zz><.x><.aa><.di> a, [b,c]
And general format of store is this:
ST<zz><.aa><.di> c, [b,s9]
Where:
<zz> is data size field and can be one of
<empty> (bits 00) - Word (32-bit), default behavior
B (bits 01) - Byte
H (bits 10) - Half-word (16-bit)
<.x> is data extend mode:
<empty> (bit 0) - If size is not Word(32-bit), then data is zero extended
X (bit 1) - If size is not Word(32-bit), then data is sign extended
<.aa> is address write-back mode:
<empty> (bits 00) - no write-back
.AW (bits 01) - Preincrement, base register updated pre memory transaction
.AB (bits 10) - Postincrement, base register updated post memory transaction
<.di> is cache bypass mode:
<empty> (bit 0) - Cached memory access, default mode
.DI (bit 1) - Non-cached data memory access
This patch adds these load/store instruction variants to the ARC backend.
Patch By Denis Antrushin! <denis@synopsys.com>
Differential Revision: https://reviews.llvm.org/D58980
llvm-svn: 356200
The shift argument is defined to be modulo the bitwidth, so if that argument
is a constant, we can always reduce the constant to its minimal form to allow
better CSE and other follow-on transforms.
We need to be careful to ignore constant expressions here, or we will likely
infinite loop. I'm adding a general vector constant query for that case.
Differential Revision: https://reviews.llvm.org/D59374
llvm-svn: 356192
This adds support for inserting elements into packed vectors. It also adds
two tests: one for selection, and one for regbank select.
Unpacked vectors will come in a follow-up.
Differential Revision: https://reviews.llvm.org/D59325
llvm-svn: 356182
Summary:
CoverageExporterJson::renderFiles accounts for most of the execution time given a large profdata file with multiple binaries.
Proposed solution is to generate JSON for each file in parallel and sort at the end to preserve deterministic output. Also added flags to skip generating parts of the output to trim the output size.
Patch by Sajjad Mirza (@sajjadm).
Reviewers: Dor1s, vsk
Reviewed By: Dor1s, vsk
Subscribers: liaoyuke, mgrang, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59277
llvm-svn: 356178
Building on the work done in D57601, now that we can distinguish between atomic and volatile memory accesses, go ahead and allow code motion of unordered atomics. As seen in the diffs, this allows much better folding of memory operations into using instructions. (Mostly done by the PeepholeOpt pass.)
Note: I have not reviewed all callers of hasOrderedMemoryRef since one of them - isSafeToMove - is very widely used. I'm relying on the documented semantics of each method to judge correctness.
Differential Revision: https://reviews.llvm.org/D59345
llvm-svn: 356170
These instructions used to use rotl with a bitwidth-1 immediate. I changed the immediate to 1,
but failed to change the opcode.
Thankfully this seems to have not caused a functional issue because we now had two rotl by 1 patterns,
but the correct ones were earlier and took priority. So we just missed some optimization.
llvm-svn: 356164
This is an immediate fix for:
https://bugs.llvm.org/show_bug.cgi?id=41066
...but as noted there and the code comments, we should do better
by stubbing this out sooner.
llvm-svn: 356158
This is consistent with what SelectionDAG does and is much easier to
work with than the extract sequence with an artificial wide register.
For the AMDGPU control flow intrinsics, this was producing an s128 for
the i64, i1 tuple return. Any legalization that should apply to a real
s128 value would badly obscure the direct values that need to be seen.
llvm-svn: 356147
I found these by asserting in clang for any GCCBuiltin that doesn't
require mangling and requires a constant for the builtin. This means
that intrinsics are missing which don't use GCCBuiltin, don't have
builtins defined in clang, or were missing the constant annotation in
the builtin definition.
llvm-svn: 356144
This patch changes llvm-objcopy's behaviour to not strip sections that
are in segments, if they otherwise would be due to a stripping operation
(--strip-all, --strip-sections, --strip-non-alloc). This preserves the
segment contents. It does not change the behaviour of --strip-all-gnu
(although we could choose to do so), because GNU objcopy's behaviour in
this case seems to be to strip the section, nor does it prevent removing
of sections in segments with --remove-section (if a user REALLY wants to
remove a section, we should probably let them, although I could be
persuaded that warning might be appropriate). Tests have been added to
show this latter behaviour.
This fixes https://bugs.llvm.org/show_bug.cgi?id=41006.
Reviewed by: grimar, rupprecht, jakehehrlich
Differential Revision: https://reviews.llvm.org/D59293
This is a reland of r356129, attempting to fix greendragon failures
due to a suspected compatibility issue with od on the greendragon bots
versus other versions.
llvm-svn: 356136
When choosing whether a pair of loads can be combined into a single
wide load, we check that the load only has a sext user and that sext
also only has one user. But this can prevent the transformation in
the cases when parallel macs use the same loaded data multiple times.
To enable this, we need to fix up any other uses after creating the
wide load: generating a trunc and a shift + trunc pair to recreate
the narrow values. We also need to keep a record of which loads have
already been widened.
Differential Revision: https://reviews.llvm.org/D59215
llvm-svn: 356132
