I was a bit lazy when I first implemented this & skipped the index
lookup - obviously for large files this becomes pretty crucial, so here
we go, do the index lookup. Speeds up large DWP symbolizing by... lots.
(20m -> 20s, actually, maybe more in a release build (that was a release
build without index lookup, compared to a debug/non-release build with
the index usage))
llvm-svn: 309507
If you've archived the DWP file somewhere it's probably useful to be
able to just tell llvm-symbolizer where it is when you're symbolizing
stack traces from the binary.
This only provides a mechanism for specifying a single DWP file, good if
you're symbolizing a program with a single DWP file, but it's likely if
the program is dynamically linked that you might have a DWP for each
dynamic library - in which case this feature won't help (at least as
it's surfaced in llvm-symbolizer for now) - in theory it could be
extended to specify a collection of DWP files that could all be
consulted for split CU hash resolution.
llvm-svn: 309498
SUMMARY
This patch adds a verification check on the abbreviation declarations in the .debug_abbrev section.
The check makes sure that no abbreviation declaration has more than one attributes with the same name.
Differential Revision: https://reviews.llvm.org/D35643
llvm-svn: 308579
This changes DwarfContext to delegate to DwarfObject instead of having
pure virtual methods.
With this DwarfContextInMemory is replaced with an implementation of
DwarfObject that is local to a .cpp file.
llvm-svn: 308543
Summary:
This patch modifies the handleDebugInfo() function so that we verify the contents of each unit
in the .debug_info section only if its header has been successfully verified.
This change will allow for more/different verification checks depending on the type of the unit since from
dwarf5, the .debug_info section may consist of different types of units.
Subscribers: aprantl
Differential Revision: https://reviews.llvm.org/D35521
llvm-svn: 308245
This patch adds verification checks for the unit header chain in the .debug_info section.
Specifically, for each unit in the .debug_info section, the verifier checks that:
The unit length is valid (i.e. the unit can actually fit in the .debug_info section)
The dwarf version of the unit is valid
The address size is valid (4 or 8)
The unit type (if the unit is in dwarf5) is valid
The debug_abbrev_offset is valid
llvm-svn: 307975
Code to convert MachO - specific section debug section names to standard DWARF v5
section names was in the wrong place.
Differential Revision: https://reviews.llvm.org/D35321
llvm-svn: 307872
Doing so is leaking an implementation detail.
I have an implementation that uses the lld infrastructure and doesn't
use a map or object::SectionRef.
llvm-svn: 307846
Variable was called 'Name' and contained text
name of relocation type. Problem was that
outside of this error handling scope we already
have different 'Name' variable that contains
section name.
Change helps to avoid confusion.
llvm-svn: 307530
This patch verifies the number of atoms, the validity of the form for each atom, as well as the validity of the
hashdata. For hashdata, we're verifying that the hashdata offset is correct and that the offset in the .debug_info for
each DIE in the hashdata is also valid.
llvm-svn: 306735
Requires callers to directly associate relocations with a DataExtractor
used to read data from a DWARF section, which helps a callee not make
assumptions about which section it is reading.
This is the next step in reducing DWARFFormValue's dependence on DWARFUnit.
Differential Revision: https://reviews.llvm.org/D34704
llvm-svn: 306699
Because of mistake introduced in r306517,
wrong variable ("name" instead of "Name") was used
in error message.
As a result it reported section name instead of
relocation name.
This file still needs cleanup to match LLVM coding style
and more tests I think.
llvm-svn: 306677
With fix in include folder character case:
#include "llvm/Codegen/AsmPrinter.h" -> #include "llvm/CodeGen/AsmPrinter.h"
Original commit message:
Change introduces error reporting policy for DWARFContextInMemory.
New callback provided by client is able to handle error on it's
side and return Halt or Continue.
That allows to either keep current behavior when parser prints all errors
but continues parsing object or implement something very different, like
stop parsing on a first error and report an error in a client style.
Differential revision: https://reviews.llvm.org/D34328
llvm-svn: 306517
Change introduces error reporting policy for DWARFContextInMemory.
New callback provided by client is able to handle error on it's
side and return Halt or Continue.
That allows to either keep current behavior when parser prints all errors
but continues parsing object or implement something very different, like
stop parsing on a first error and report an error in a client style.
Differential revision: https://reviews.llvm.org/D34328
llvm-svn: 306512
Some forms have sizes that depend on the DWARF version, DWARF format
(32/64-bit), or the size of an address. Collect these into a struct
to simplify passing them around. Require callers to provide one when
they query a form's size.
Differential Revision: http://reviews.llvm.org/D34570
llvm-svn: 306315
The verifier should not output any message in such a case.
Added test case with no .apple_name section in the file to verify new functionality.
Made existing test case more specific.
llvm-svn: 305597
This patch adds code which verifies that each bucket in the .apple_names
accelerator table is either empty or has a valid hash index.
Differential Revision: https://reviews.llvm.org/D34177
llvm-svn: 305344
This creates a new library called BinaryFormat that has all of
the headers from llvm/Support containing structure and layout
definitions for various types of binary formats like dwarf, coff,
elf, etc as well as the code for identifying a file from its
magic.
Differential Revision: https://reviews.llvm.org/D33843
llvm-svn: 304864
This patch introduces a new command line option, called brief, to
llvm-dwarfdump. When -brief is used, the attribute forms for the
.debug_info section will not be emitted to output.
Patch by Spyridoula Gravani!
rdar://problem/21474365
Differential Revision: https://reviews.llvm.org/D33867
llvm-svn: 304844
I did this a long time ago with a janky python script, but now
clang-format has built-in support for this. I fed clang-format every
line with a #include and let it re-sort things according to the precise
LLVM rules for include ordering baked into clang-format these days.
I've reverted a number of files where the results of sorting includes
isn't healthy. Either places where we have legacy code relying on
particular include ordering (where possible, I'll fix these separately)
or where we have particular formatting around #include lines that
I didn't want to disturb in this patch.
This patch is *entirely* mechanical. If you get merge conflicts or
anything, just ignore the changes in this patch and run clang-format
over your #include lines in the files.
Sorry for any noise here, but it is important to keep these things
stable. I was seeing an increasing number of patches with irrelevant
re-ordering of #include lines because clang-format was used. This patch
at least isolates that churn, makes it easy to skip when resolving
conflicts, and gets us to a clean baseline (again).
llvm-svn: 304787
This commit introduces a structure that holds all the flags that
control the pretty printing of dwarf output.
Patch by Spyridoula Gravani!
Differential Revision: https://reviews.llvm.org/D33749
llvm-svn: 304446
With fix of uninitialized variable.
Original commit message:
This change is intended to use for LLD in D33183.
Problem we have in LLD when building .gdb_index is that we need to know section which address range belongs to.
Previously it was solved on LLD side by providing fake section addresses with use of llvm::LoadedObjectInfo
interface. We assigned file offsets as addressed. Then after obtaining ranges lists, for each range we had to find section ID's.
That not only was slow, but also complicated implementation and was the reason of incorrect behavior when
sections share the same offsets, like D33176 shows.
This patch makes DWARF parsers to return section index as well. That solves problem mentioned above.
Differential revision: https://reviews.llvm.org/D33184
llvm-svn: 304078
This change is intended to use for LLD in D33183.
Problem we have in LLD when building .gdb_index is that we need to know section which address range belongs to.
Previously it was solved on LLD side by providing fake section addresses with use of llvm::LoadedObjectInfo
interface. We assigned file offsets as addressed. Then after obtaining ranges lists, for each range we had to find section ID's.
That not only was slow, but also complicated implementation and was the reason of incorrect behavior when
sections share the same offsets, like D33176 shows.
This patch makes DWARF parsers to return section index as well. That solves problem mentioned above.
Differential revision: https://reviews.llvm.org/D33184
llvm-svn: 304002
With fix of test compilation.
Initial commit message:
This change is intended to use for LLD in D33183.
Problem we have in LLD when building .gdb_index is that we need to know section
which address range belongs to.
Previously it was solved on LLD side by providing fake section addresses
with use of llvm::LoadedObjectInfo interface. We assigned file offsets as addressed.
Then after obtaining ranges lists, for each range we had to find section ID's.
That not only was slow, but also complicated implementation and was the reason
of incorrect behavior when
sections share the same offsets, like D33176 shows.
This patch makes DWARF parsers to return section index as well.
That solves problem mentioned above.
Differential revision: https://reviews.llvm.org/D33184
llvm-svn: 303983
This change is intended to use for LLD in D33183.
Problem we have in LLD when building .gdb_index is that we need to know section
which address range belongs to.
Previously it was solved on LLD side by providing fake section addresses
with use of llvm::LoadedObjectInfo interface. We assigned file offsets as addressed.
Then after obtaining ranges lists, for each range we had to find section ID's.
That not only was slow, but also complicated implementation and was the reason
of incorrect behavior when
sections share the same offsets, like D33176 shows.
This patch makes DWARF parsers to return section index as well.
That solves problem mentioned above.
Differential revision: https://reviews.llvm.org/D33184
llvm-svn: 303978
llvm-symbolizer would fail to symbolize addresses in unlinked object
files when handling .dwo file data because the addresses would not be
relocated in the same way as the ranges in the skeleton CU in the object
file.
Fix that so object files can be symbolized the same as executables.
llvm-svn: 303532
We do not need to store relocation width field.
Patch removes relative code, that simplifies implementation.
Differential revision: https://reviews.llvm.org/D33274
llvm-svn: 303335
I revisited Decompressor API (issue with it was triggered during D32865 review)
and found it is probably provides more then we really need.
Issue was about next method's signature:
Error decompress(SmallString<32> &Out);
It is too strict. At first I wanted to change it to decompress(SmallVectorImpl<char> &Out),
but then found it is still not flexible because sticks to SmallVector.
During reviews was suggested to use templating to simplify code. Patch do that.
Differential revision: https://reviews.llvm.org/D33200
llvm-svn: 303331
RelocAddrMap was a pair of <width, address>, where width is relocation size (4/8/x, x < 8),
and width field was never used in code.
Relocations proccessing loop had checks for width field. Does not look like DWARF parser
should do that. There is probably no much sense to validate relocations during proccessing
them in parser.
Patch removes relocation's width relative code from DWARFContext.
Differential revision: https://reviews.llvm.org/D33194
llvm-svn: 303251
Recommit of r303159 "[DWARF] - Use DWARFAddressRange struct instead of uint64_t pair for DWARFAddressRangesVector"
All places were shitched to use DWARFAddressRange now.
Suggested during review of D33184.
llvm-svn: 303163
I am working on a speedup of building .gdb_index in LLD and
noticed that relocations that are proccessed in DWARFContextInMemory often uses
the same symbol in a row. This patch introduces caching to reduce the relocations
proccessing time.
For benchmark,
I took debug LLC binary objects configured with -ggnu-pubnames and linked it using LLD.
Link time without --gdb-index is about 4,45s.
Link time with --gdb-index: a) Without patch: 19,16s b) With patch: 15,52s
That means time spent on --gdb-index in this configuration is
19,16s - 4,45s = 14,71s (without patch) vs 15,52s - 4,45s = 11,07s (with patch).
Differential revision: https://reviews.llvm.org/D31136
llvm-svn: 303051
There is no other explanation about why this only started happening
now, even though it crashes on old code (supposedly reachable from
here).
The only common factor between the failing bots is that they use GCC
(4.9 and 5.3) to compile Clang, while the others use Clang 3.8, but the
failure is while building the tests, as an assertion, on Clang.
Commenting it out for now in hope the bots will go back green, but we
should keep looking for the real cause, and update bugzilla.
llvm-svn: 302520
llvm-dwarfdump currently prints no message if decompression fails
for some reason. I noticed that during work on one of LLD patches
where LLD produced an broken output. It was a bit confusing to see
no output for section dumped and no any error message at all.
Patch adds error message for such cases.
Differential revision: https://reviews.llvm.org/D32865
llvm-svn: 302221
Adrian requested that we break things down to make things clean in the DWARFVerifier. This patch breaks everything down into nice individual functions and cleans up the code quite a bit and prepares us for the next round of verifiers.
Differential Revision: https://reviews.llvm.org/D32812
llvm-svn: 302062
Adrian requested we create a DWARFVerifier.cpp file to contain all of the DWARF verification stuff. This change simply moves the functionality over into DWARFVerifier.h and DWARFVerifier.cpp, renames the DWARFVerifier methods to start with lower case, and switches DWARFContext.cpp over to using the new functionality.
Differential Revision: https://reviews.llvm.org/D32809
llvm-svn: 302044
Check to make sure no compile units have the same DW_AT_stmt_list values. Report a verification error if they do.
Differential Revision: https://reviews.llvm.org/D32771
llvm-svn: 302039
This patch verifies the .debug_line:
- verify all addresses in a line table sequence have ascending addresses
- verify that all line table file indexes are valid
Unit tests added for both cases.
Differential Revision: https://reviews.llvm.org/D32765
llvm-svn: 301984
The directory and file tables now have form-based content descriptors.
Parse these and extract the per-directory/file records based on the
descriptors. For now we support only DW_FORM_string (inline) for the
path names; follow-up work will add support for indirect forms (i.e.,
DW_FORM_strp, strx<N>, and line_strp).
Differential Revision: http://reviews.llvm.org/D32713
llvm-svn: 301978
LTO and other fancy linking previously led to DWARF that contained invalid references. We already validate that CU relative references fall into the CU, and the DW_FORM_ref_addr references fall inside the .debug_info section, but we didn't validate that the references pointed to correct DIE offsets. This new verification will ensure that all references refer to actual DIEs and not an offset in between.
This caught a bug in DWARFUnit::getDIEForOffset() where if you gave it any offset, it would match the DIE that mathes the offset _or_ the next DIE. This has been fixed.
Differential Revision: https://reviews.llvm.org/D32722
llvm-svn: 301971
lldb-dwarfdump gets a new "--verify" option that will verify a single file's DWARF debug info and will print out any errors that it finds. It will return an non-zero exit status if verification fails, and a zero exit status if verification succeeds. Adding the --quiet option will suppress any output the STDOUT or STDERR.
The first part of the verify does the following:
- verifies that all CU relative references (DW_FORM_ref1, DW_FORM_ref2, DW_FORM_ref4, DW_FORM_ref8, DW_FORM_ref_udata) have valid CU offsets
- verifies that all DW_FORM_ref_addr references have valid .debug_info offsets
- verifies that all DW_AT_ranges attributes have valid .debug_ranges offsets
- verifies that all DW_AT_stmt_list attributes have valid .debug_line offsets
- verifies that all DW_FORM_strp attributes have valid .debug_str offsets
Unit tests were added for each of the above cases.
Differential Revision: https://reviews.llvm.org/D32707
llvm-svn: 301844
There was a garbage character in output introduced by myself in
r290040 "[DWARF] - Introduce DWARFDebugPubTable class for dumping pub* sections."
llvm-svn: 301631
It is useful to output size of ranges when address ranges
section of .gdb_index is dumped.
It helps to compare outputs produced by different linkers,
for example. In that case address ranges can look very different,
when they are the same at fact. Difference comes from different
low address because of different address of .text.
Differential revision: https://reviews.llvm.org/D32492
llvm-svn: 301527
I found this when investigated "Bug 32319 - .gdb_index is broken/incomplete" for LLD.
When we have object file with .debug_ranges section it may be filled with zeroes.
Relocations are exist in file to relocate this zeroes into real values later, but until that
a pair of zeroes is treated as terminator. And DWARF parser thinks there is no ranges at all
when I am trying to collect address ranges for building .gdb_index.
Solution implemented in this patch is to take relocations in account when parsing ranges.
Differential revision: https://reviews.llvm.org/D32228
llvm-svn: 301170
This is splitted from D32228,
currently DWARF parsers code has few places that applied relocations values manually.
These places has similar duplicated code. Patch introduces separate method that can be
used to obtain relocated value. That helps to reduce code and simplifies things.
Differential revision: https://reviews.llvm.org/D32284
llvm-svn: 300956
Summary:
In the current implementation, to find inline stack for an address incurs expensive linear search in 2 places:
* linear search for the top-level DIE
* recursive linear traverse the DIE tree to find the path to the leaf DIE
In this patch, a map is built from address to its corresponding leaf DIE. The inline stack is built by traversing from the leaf DIE up to the root DIE. This speeds up batch symbolization by ~10X without noticible memory overhead.
Reviewers: dblaikie
Reviewed By: dblaikie
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32177
llvm-svn: 300742
Summary:
In the current implementation, to find inline stack for an address incurs expensive linear search in 2 places:
* linear search for the top-level DIE
* recursive linear traverse the DIE tree to find the path to the leaf DIE
In this patch, a map is built from address to its corresponding leaf DIE. The inline stack is built by traversing from the leaf DIE up to the root DIE. This speeds up batch symbolization by ~10X without noticible memory overhead.
Reviewers: dblaikie
Reviewed By: dblaikie
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32177
llvm-svn: 300697
This change is basically relative to D31136, where I initially wanted to
implement some relocations handling optimization which shows it can give
significant boost. Though even without any caching algorithm looks
code can have some cleanup at first.
Refactoring separates out code for taking symbol address, used in relocations
computation.
Differential revision: https://reviews.llvm.org/D31747
llvm-svn: 300039
Some late additions to DWARF v5 were not in Dwarf.def; also one form
was redefined. Add the new cases to relevant switches in different
parts of LLVM. Replace DW_FORM_ref_sup with DW_FORM_ref_sup[4,8].
I did not add support for DW_FORM_strx3/addrx3 other that defining the
constants. We don't have any infrastructure to support these.
Differential Revision: http://reviews.llvm.org/D30664
llvm-svn: 297085
Requesting DWARF v5 will now get you the new compile-unit and
type-unit headers. llvm-dwarfdump will also recognize them.
Differential Revision: http://reviews.llvm.org/D30206
llvm-svn: 296514
When dumping .debug_info section we loop through all attributes mentioned in
.debug_abbrev section and dump values using DWARFFormValue::extractValue().
We need to skip implicit_const attributes here as their values are not
really located in .debug_info but directly in .debug_abbrev. This patch fixes
triggered assert() in DWARFFormValue::extractValue() caused by trying to
access implicit_const values from .debug_info.
llvm-svn: 296253
DWARF info contains info about the line number at which a function starts (DW_AT_decl_line).
This patch creates a function to look up the start line number for a function, and returns it in
DILineInfo when looking up debug info for a particular address.
Patch by Simon Que!
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D27962
llvm-svn: 294231
We had various variants of defining dump() functions in LLVM. Normalize
them (this should just consistently implement the things discussed in
http://lists.llvm.org/pipermail/cfe-dev/2014-January/034323.html
For reference:
- Public headers should just declare the dump() method but not use
LLVM_DUMP_METHOD or #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP)
- The definition of a dump method should look like this:
#if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP)
LLVM_DUMP_METHOD void MyClass::dump() {
// print stuff to dbgs()...
}
#endif
llvm-svn: 293359
Summary: This patch adds some new APIs to enable using the YAML DWARF representation in unit tests. The most basic new API is DWARFYAML::EmitDebugSections which converts a YAML string into a series of owned MemoryBuffer objects stored in a StringMap. The string map can then be used to construct a DWARFContext for parsing in place of an ObjectFile.
Reviewers: dblaikie, clayborg
Subscribers: mgorny, fhahn, jgosnell, aprantl, llvm-commits
Differential Revision: https://reviews.llvm.org/D28828
llvm-svn: 292634
This allows us efficiently look for more than one attribute, something that is quite common in DWARF consumption.
Differential Revision: https://reviews.llvm.org/D28704
llvm-svn: 291967
Removed all DWARFDie::getAttributeValueAs*() calls.
Renamed:
Optional<DWARFFormValue> DWARFDie::getAttributeValue(dwarf::Attribute);
To:
Optional<DWARFFormValue> DWARFDie::find(dwarf::Attribute);
Added:
Optional<DWARFFormValue> DWARFDie::findRecursively(dwarf::Attribute);
All decoding of Optional<DWARFFormValue> values are now done using the dwarf::to*() functions from DWARFFormValue.h:
Old code:
auto DeclLine = DWARFDie.getAttributeValueAsSignedConstant(DW_AT_decl_line).getValueOr(0);
New code:
auto DeclLine = toUnsigned(DWARFDie.find(DW_AT_decl_line), 0);
This composition helps us since we can now easily do:
auto DeclLine = toUnsigned(DWARFDie.findRecursively(DW_AT_decl_line), 0);
This allows us to easily find attribute values in the current DIE only (the first new code above) or in any DW_AT_abstract_origin or DW_AT_specification Dies using the line above. Note that the code line length is shorter and more concise.
Differential Revision: https://reviews.llvm.org/D28581
llvm-svn: 291959
Now we only support returning Optional<> values and have changed all clients over to use Optional::getValueOr().
Differential Revision: https://reviews.llvm.org/D28569
llvm-svn: 291686
Decompressor intention is to reduce duplication of code.
Currently LLD has own implementation of decompressor
for compressed debug sections.
This class helps to avoid it and share the code.
LLD patch for reusing it is D28106
Differential revision: https://reviews.llvm.org/D28105
llvm-svn: 291675
Support for DW_FORM_implicit_const DWARFv5 feature.
When this form is used attribute value goes to .debug_abbrev section (as SLEB).
As this form would break any debug tool which doesn't support DWARFv5
it is guarded by dwarf version check. Attempt to use this form with
dwarf version <= 4 is considered a fatal error.
Differential Revision: https://reviews.llvm.org/D28456
llvm-svn: 291599
This patch adds support for YAML<->DWARF for debug_info sections.
This re-lands r290147, reverted in 290148, re-landed in r290204 after fixing the issue that caused bots to fail (thank you UBSan!), and reverted again in r290209 due to failures on big endian systems.
After adding support for preserving endianness, this should be good now.
llvm-svn: 290386
In order for the llvm DWARF parser to be used in LLDB we will need to be able to get the parent of a DIE. This patch adds that functionality by changing the DWARFDebugInfoEntry class to store a depth field instead of a sibling index. Using a depth field allows us to easily calculate the sibling and the parent without increasing the size of DWARFDebugInfoEntry.
I tested llvm-dsymutil on a debug version of clang where this fully parses DWARF in over 1200 .o files to verify there was no serious regression in performance.
Added a full suite of unit tests to test this functionality.
Differential Revision: https://reviews.llvm.org/D27995
llvm-svn: 290274
This patch adds support for YAML<->DWARF for debug_info sections.
This re-lands r290147, after fixing the issue that caused bots to fail (thank you UBSan!).
llvm-svn: 290204
DWARF 4 and later supports encoding the PC as an address or as as offset from the low PC. Clients using DWARFDie should be insulated from how to extract the high PC value. This function takes care of extracting the form value and looking for the correct form.
Differential Revision: https://reviews.llvm.org/D27885
llvm-svn: 290131
Patch implements parser of pubnames/pubtypes tables instead of static
function used before. It is now should be possible to reuse it
in LLD or other projects and clean up the duplication code.
Differential revision: https://reviews.llvm.org/D27851
llvm-svn: 290040
Reverting because this breaks lld's gdb_index support - it's probably
double counting the abbrev relocation offset.
This reverts commit r289954.
llvm-svn: 289961
Input can be produced by ld -r, for example (a normal LLVM workflow
never hits this - LLVM only ever produces a single abbrev table in an
object (shared by multiple CUs), so the reloc's always 0, and when it's
linked together the relocation's resolved so it doesn't need to be
handled)
llvm-svn: 289954
When getting attributes it is sometimes nicer to use Optional<T> some of the time instead of magic values. I tried to cut over to only using the Optional values but it made many of the call sites very messy, so it makes sense the leave in the calls that can return a default value. Otherwise code that looks like this:
uint64_t CallColumn = Die.getAttributeValueAsAddress(DW_AT_call_line, 0);
Has to be turned into:
uint64_t CallColumn = 0;
if (auto CallColumnValue = Die.getAttributeValueAsAddress(DW_AT_call_line))
CallColumn = *CallColumnValue;
The first snippet of code looks much better. But in cases where you want an offset that may or may not be there, the following code looks better:
if (auto StmtOffset = Die.getAttributeValueAsSectionOffset(DW_AT_stmt_list)) {
// Use StmtOffset
}
Differential Revision: https://reviews.llvm.org/D27772
llvm-svn: 289731
Adds a "Discriminator" field to struct DILineInfo, which defaults to 0.
Fills out the "Discriminator" field in DILineInfo in DWARFDebugLine::LineTable::getFileLineInfoForAddress().
in order to have a slightly nicer interface in getFileLineInfoForAddress.
Patch by Simon Que!
Differential Revision: https://reviews.llvm.org/D27649
llvm-svn: 289683
Many places pass around a DWARFDebugInfoEntryMinimal and a DWARFUnit. It is easy to get things wrong by using the wrong DWARFUnit with a DWARFDebugInfoEntryMinimal. This patch creates a DWARFDie class that contains the DWARFUnit and DWARFDebugInfoEntryMinimal objects so that they can't get out of sync. All attribute extraction has been moved out of DWARFDebugInfoEntryMinimal and into DWARFDie. DWARFDebugInfoEntryMinimal was also renamed to DWARFDebugInfoEntry.
DWARFDie objects are temporary objects that are used by clients and contain 2 pointers that you always need to have anyway. Keeping them grouped will avoid errors and simplify many of the attribute extracting APIs by not having to pass in a DWARFUnit.
Differential Revision: https://reviews.llvm.org/D27634
llvm-svn: 289565
The only tests we have for the DWARF parser are the tests that use llvm-dwarfdump and expect output from textual dumps.
More DWARF parser modification are coming in the next few weeks and I wanted to add tests that can verify that we can encode and decode all form types, as well as test some other basic DWARF APIs where we ask DIE objects for their children and siblings.
DwarfGenerator.cpp was added in the lib/CodeGen directory. This file contains the code necessary to easily create DWARF for tests:
dwarfgen::Generator DG;
Triple Triple("x86_64--");
bool success = DG.init(Triple, Version);
if (!success)
return;
dwarfgen::CompileUnit &CU = DG.addCompileUnit();
dwarfgen::DIE CUDie = CU.getUnitDIE();
CUDie.addAttribute(DW_AT_name, DW_FORM_strp, "/tmp/main.c");
CUDie.addAttribute(DW_AT_language, DW_FORM_data2, DW_LANG_C);
dwarfgen::DIE SubprogramDie = CUDie.addChild(DW_TAG_subprogram);
SubprogramDie.addAttribute(DW_AT_name, DW_FORM_strp, "main");
SubprogramDie.addAttribute(DW_AT_low_pc, DW_FORM_addr, 0x1000U);
SubprogramDie.addAttribute(DW_AT_high_pc, DW_FORM_addr, 0x2000U);
dwarfgen::DIE IntDie = CUDie.addChild(DW_TAG_base_type);
IntDie.addAttribute(DW_AT_name, DW_FORM_strp, "int");
IntDie.addAttribute(DW_AT_encoding, DW_FORM_data1, DW_ATE_signed);
IntDie.addAttribute(DW_AT_byte_size, DW_FORM_data1, 4);
dwarfgen::DIE ArgcDie = SubprogramDie.addChild(DW_TAG_formal_parameter);
ArgcDie.addAttribute(DW_AT_name, DW_FORM_strp, "argc");
// ArgcDie.addAttribute(DW_AT_type, DW_FORM_ref4, IntDie);
ArgcDie.addAttribute(DW_AT_type, DW_FORM_ref_addr, IntDie);
StringRef FileBytes = DG.generate();
MemoryBufferRef FileBuffer(FileBytes, "dwarf");
auto Obj = object::ObjectFile::createObjectFile(FileBuffer);
EXPECT_TRUE((bool)Obj);
DWARFContextInMemory DwarfContext(*Obj.get());
This code is backed by the AsmPrinter code that emits DWARF for the actual compiler.
While adding unit tests it was discovered that DIEValue that used DIEEntry as their values had bugs where DW_FORM_ref1, DW_FORM_ref2, DW_FORM_ref8, and DW_FORM_ref_udata forms were not supported. These are all now supported. Added support for DW_FORM_string so we can emit inlined C strings.
Centralized the code to unique abbreviations into a new DIEAbbrevSet class and made both the dwarfgen::Generator and the llvm::DwarfFile classes use the new class.
Fixed comments in the llvm::DIE class so that the Offset is known to be the compile/type unit offset.
DIEInteger now supports more DW_FORM values.
There are also unit tests that cover:
Encoding and decoding all form types and values
Encoding and decoding all reference types (DW_FORM_ref1, DW_FORM_ref2, DW_FORM_ref4, DW_FORM_ref8, DW_FORM_ref_udata, DW_FORM_ref_addr) including cross compile unit references with that go forward one compile unit and backward on compile unit.
Differential Revision: https://reviews.llvm.org/D27326
llvm-svn: 289010
This patch gets a DWARF parsing speed improvement by having DWARFAbbreviationDeclaration instances know if they have a fixed byte size. If an abbreviation has a fixed byte size that can be calculated given a DWARFUnit, then parsing a DIE becomes two steps: parse ULEB128 abbrev code, and then add constant size to the offset.
This patch also adds a fixed byte size to each DWARFAbbreviationDeclaration::AttributeSpec so that attributes can quickly skip their values if needed without the need to lookup the fixed for size.
Notable improvements:
- DWARFAbbreviationDeclaration::findAttributeIndex() now returns an Optional<uint32_t> instead of a uint32_t and we no longer have to look for the magic -1U return value
- Optional<uint32_t> DWARFAbbreviationDeclaration::findAttributeIndex(dwarf::Attribute attr) const;
- DWARFAbbreviationDeclaration now has a getAttributeValue() function that extracts an attribute value given a DIE offset that takes advantage of the DWARFAbbreviationDeclaration::AttributeSpec::ByteSize
- bool DWARFAbbreviationDeclaration::getAttributeValue(const uint32_t DIEOffset, const dwarf::Attribute Attr, const DWARFUnit &U, DWARFFormValue &FormValue) const;
- A DWARFAbbreviationDeclaration instance can return a fixed byte size for itself so DWARF parsing is faster:
- Optional<size_t> DWARFAbbreviationDeclaration::getFixedAttributesByteSize(const DWARFUnit &U) const;
- Any functions that used to take a "const DWARFUnit *U" that would crash if U was NULL now take a "const DWARFUnit &U" and are only called with a valid DWARFUnit
Differential Revision: https://reviews.llvm.org/D26567
llvm-svn: 286924
https://reviews.llvm.org/D26526
- Fixed DW_FORM_strp to be correctly sized and extracted for DWARF64
- Added some missing strp variants as well
- Fixed comment typo
llvm-svn: 286603
In preparation for a follow on patch that improves DWARF parsing speed, clean up DWARFFormValue so that we have can get the fixed byte size of a form value given a DWARFUnit or given the version, address byte size and dwarf32/64.
This patch cleans up code so that everyone is using one of the new DWARFFormValue functions:
static Optional<uint8_t> DWARFFormValue::getFixedByteSize(dwarf::Form Form, const DWARFUnit *U = nullptr);
static Optional<uint8_t> DWARFFormValue::getFixedByteSize(dwarf::Form Form, uint16_t Version, uint8_t AddrSize, bool Dwarf32);
This patch changes DWARFFormValue::skipValue() to rely on the output of DWARFFormValue::getFixedByteSize(...) instead of duplicating the code in each function. This will reduce the number of changes we need to make to DWARF to fewer places in DWARFFormValue when we add support for new form.
This patch also starts to support DWARF64 so that we can get correct byte sizes for forms that vary according the DWARF 32/64.
To reduce the code duplication a new FormSizeHelper pure virtual class was created that can be created as a FormSizeHelperDWARFUnit when you have a DWARFUnit, or FormSizeHelperManual where you manually specify the DWARF version, address byte size and DWARF32/DWARF64. There is now a single implementation of a function that gets the fixed byte size (instead of two where one took a DWARFUnit and one took the DWARF version, address byte size and DWARFFormat enum) and one function to skip the form values.
https://reviews.llvm.org/D26526
llvm-svn: 286597
Modifying DWARFFormValue to remember the DWARFUnit that it was encoded with can simplify the usage of instances of this class. Previously users would have to try and pass in the same DWARFUnit that was used to decode the form value and there was a possibility that a different DWARFUnit might be supplied to the functions that extract values (strings, CU relative references, addresses) and cause problems. This fixes this potential issue by storing the DWARFUnit inside the DWARFFormValue so that this mistake can't be made. Instances of DWARFFormValue are not stored permanently and are used as temporary values, so the increase in size of an instance of DWARFFormValue isn't a big deal. This makes decoding form values more bullet proof and is a change that will be used by future modifications.
https://reviews.llvm.org/D26052
llvm-svn: 285594
This is just a quick utility handy for getting rough summaries of types
in a given object or dwo file. I've been using it to investigate the
amount of type info redundancy across a project build, for example.
llvm-svn: 284537
This change adds a hasFileAtIndex method. getChildDeclContext can first call this method, and if it returns true it knows it can then lookup the resolved path cache for the given file index. If we hit that cache then we don't even have to call getFileNameByIndex.
Running dsymutil against the swift executable built from github gives a 20% performance improvement without any change in the binary.
Differential Revision: https://reviews.llvm.org/D22655
Reviewed by friss.
llvm-svn: 276380
a good error message to be produced.
This is nearly the last libObject interface that used ErrorOr and the last one
that appears in llvm/include/llvm/Object/MachO.h . For Mach-O objects this is
just a clean up because it’s version of getSymbolAddress() can’t return an
error.
I will leave it to the experts on COFF and ELF to actually add meaning full
error messages in their tests if they wish. And also leave it to these experts
to change the last two ErrorOr interfaces in llvm/include/llvm/Object/ObjectFile.h
for createCOFFObjectFile() and createELFObjectFile() if they wish.
Since there are no test cases for COFF and ELF error cases with respect to
getSymbolAddress() in the test suite this is no functional change (NFC).
llvm-svn: 273701
Fix was:
1) Had to regenerate dwarfdump-test-zlib.elf-x86-64, dwarfdump-test-zlib-gnu.elf-x86-64
(because llvm-symbolizer-zlib.test uses that inputs for its purposes and failed).
2) Updated llvm-symbolizer-zlib.test (updated used call function address to match new files +
added one more check for newly created dwarfdump-test-zlib-gnu.elf-x86-64 binary input).
3) Updated comment in dwarfdump-test-zlib.cc.
Original commit message:
[llvm-dwarfdump] - Teach dwarfdump to decompress debug sections in zlib style.
Before this llvm-dwarfdump only recognized zlib-gnu compression style of headers,
this patch adds support for zlib style.
It looks reasonable to support both styles for dumping,
even if we are not going to suport generating of deprecated gnu one.
Differential revision: http://reviews.llvm.org/D20470
llvm-svn: 270557
fix: forgot to commit the updated dwarfdump-test-zlib.elf-x86-64
Original commit message:
[llvm-dwarfdump] - Teach dwarfdump to decompress debug sections in zlib style.
Before this llvm-dwarfdump only recognized zlib-gnu compression style of headers,
this patch adds support for zlib style.
It looks reasonable to support both styles for dumping,
even if we are not going to suport generating of deprecated gnu one.
Differential revision: http://reviews.llvm.org/D20470
llvm-svn: 270543
Before this llvm-dwarfdump only recognized zlib-gnu compression style of headers,
this patch adds support for zlib style.
It looks reasonable to support both styles for dumping,
even if we are not going to suport generating of deprecated gnu one.
Differential revision: http://reviews.llvm.org/D20470
llvm-svn: 270540
Produce another specific error message for a malformed Mach-O file when a symbol’s
section index is more than the number of sections. The existing test case in test/Object/macho-invalid.test
for macho-invalid-section-index-getSectionRawName now reports the error with the message indicating
that a symbol at a specific index has a bad section index and that bad section index value.
Again converting interfaces to Expected<> from ErrorOr<> does involve
touching a number of places. Where the existing code reported the error with a
string message or an error code it was converted to do the same.
Also there some were bugs in the existing code that did not deal with the
old ErrorOr<> return values. So now with Expected<> since they must be
checked and the error handled, I added a TODO and a comment:
"// TODO: Actually report errors helpfully" and a call something like
consumeError(NameOrErr.takeError()) so the buggy code will not crash
since needed to deal with the Error.
llvm-svn: 268298
Summary:
This is the follow-up patch for http://reviews.llvm.org/D19436
* Update the discriminator reading algorithm to match the assignment algorithm.
* Add test to cover the new algorithm.
Reviewers: dnovillo, echristo, dblaikie
Subscribers: danielcdh, dblaikie, echristo, llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D19522
llvm-svn: 267945
The dwo_name was added to dwo files to improve diagnostics in dwp, but
it confuses tools that attempt to load any dwo named by a dwo_name, even
ones inside dwos. Avoid this by keeping track of whether a unit is
already a dwo unit, and if so, not loading further dwos.
llvm-svn: 267241
Rather than relying on the gmlt-like data emitted into the .o/executable
which only contains the simple name of any inlined functions, use the
.dwo file if present.
Test symbolication with/without a .dwo, and the old test that was
testing behavior when no gmlt-like data was present. (I haven't included
a test of non-gmlt-like data + no .dwo (that would be akin to
symbolication with no debug info) but we could add one for completeness)
The test was simplified a bit to be a little clearer (unoptimized, force
inline, using a function call as the inlined entity) and regenerated
with ToT clang. For the no-gmlt-like-data case, I modified Clang back to
its old behavior temporarily & the .dwo file is identical so it is
shared between the two executables.
llvm-svn: 267227
Removed some unused headers, replaced some headers with forward class declarations.
Found using simple scripts like this one:
clear && ack --cpp -l '#include "llvm/ADT/IndexedMap.h"' | xargs grep -L 'IndexedMap[<]' | xargs grep -n --color=auto 'IndexedMap'
Patch by Eugene Kosov <claprix@yandex.ru>
Differential Revision: http://reviews.llvm.org/D19219
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 266595
1) We need to add this flag prior to adding any other, in case the user has
specified a -fmodule-cache-path= flag in their custom CXXFLAGS. Such a flag
causes -Werror builds to fail, and thus all config checks fail, until we add
the corresponding -fmodules flag. The modules selfhost bot does this, for
instance.
2) Delete module maps that were putting .cpp files into modules.
3) Enable -fmodules-local-submodule-visibility, to get proper module
visibility rules applied across submodules of the same module. Disable
-fmodules for C builds, since that flag is not available there.
llvm-svn: 266502
Produce the first specific error message for a malformed Mach-O file describing
the problem instead of the generic message for object_error::parse_failed of
"Invalid data was encountered while parsing the file”. Many more good error
messages will follow after this first one.
This is built on Lang Hames’ great work of adding the ’Error' class for
structured error handling and threading Error through MachOObjectFile
construction. And making createMachOObjectFile return Expected<...> .
So to to get the error to the llvm-obdump tool, I changed the stack of
these methods to also return Expected<...> :
object::ObjectFile::createObjectFile()
object::SymbolicFile::createSymbolicFile()
object::createBinary()
Then finally in ParseInputMachO() in MachODump.cpp the error can
be reported and the specific error message can be printed in llvm-objdump
and can be seen in the existing test case for the existing malformed binary
but with the updated error message.
Converting these interfaces to Expected<> from ErrorOr<> does involve
touching a number of places. To contain the changes for now use of
errorToErrorCode() and errorOrToExpected() are used where the callers
are yet to be converted.
Also there some were bugs in the existing code that did not deal with the
old ErrorOr<> return values. So now with Expected<> since they must be
checked and the error handled, I added a TODO and a comment:
“// TODO: Actually report errors helpfully” and a call something like
consumeError(ObjOrErr.takeError()) so the buggy code will not crash
since needed to deal with the Error.
Note there is one fix also needed to lld/COFF/InputFiles.cpp that goes along
with this that I will commit right after this. So expect lld not to built
after this commit and before the next one.
llvm-svn: 265606
CIE augmentation data might contain non-printable characters.
The patch prints the data as a list of hex bytes.
Differential Revision: http://reviews.llvm.org/D17759
llvm-svn: 262361
MCJIT emits zero-length CIE at the end of the _eh_frame section. This change
ensures that parser inside DebugInfo will not crash and correctly record such cases.
We are now recording DW_EH_PE_omit as a default value for FDE and LSDA encodings.
Also Offset != EndAugmentationOffset assertion check will only happen if augmentation
string had 'z' letter in it.
Differential Revision: http://reviews.llvm.org/D16588
llvm-svn: 258931
Summary:
This patch is provided in preparation for removing autoconf on 1/26. The proposal to remove autoconf on 1/26 was discussed on the llvm-dev thread here: http://lists.llvm.org/pipermail/llvm-dev/2016-January/093875.html
"I felt a great disturbance in the [build system], as if millions of [makefiles] suddenly cried out in terror and were suddenly silenced. I fear something [amazing] has happened."
- Obi Wan Kenobi
Reviewers: chandlerc, grosbach, bob.wilson, tstellarAMD, echristo, whitequark
Subscribers: chfast, simoncook, emaste, jholewinski, tberghammer, jfb, danalbert, srhines, arsenm, dschuff, jyknight, dsanders, joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D16471
llvm-svn: 258861
Summary:
There are a number of files in the tree which have been accidentally checked in with DOS line endings. Convert these to native line endings.
There are also a few files which have DOS line endings on purpose, and I have set the svn:eol-style property to 'CRLF' on those.
Reviewers: joerg, aaron.ballman
Subscribers: aaron.ballman, sanjoy, dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D15848
llvm-svn: 256707
LLVM MC has single methods which can handle the output of EH frame and DWARF CIE's and FDE's.
This code improves DWARFDebugFrame::parse to do the same for parsing.
This also allows llvm-objdump to support the --dwarf=frames option which objdump supports. This
option dumps the .eh_frame section using the new code in DWARFDebugFrame::parse.
http://reviews.llvm.org/D15535
Reviewed by Rafael Espindola.
llvm-svn: 256008
This is very rudimentary support for debug_cu_index, but it is enough to
allow llvm-dwarfdump to find the offsets for contributions and
correctly dump debug_info.
It will need to actually find the real signature of the unit and build
the real hash table with the right number of buckets, as per the DWP
specification.
It will also need to be expanded to cover the tu_index as well.
llvm-svn: 254489
This is a recommit of 252842 which was reverted in 252859. The issue was
using %s format specifier for a StringRef - used Format's
left_justify(StringRef, int) instead.
It'd be nice to have __attribute__((format(..))) on llvm::format, but
apparently it's only implemented for c-style variadics, not C++ variadic
templates. Perhaps we could fix that & conditionalize the attribute on
such...
llvm-svn: 253065
Added "macro" option to "-debug-dump" flag, which trigger parsing and dumping of the ".debug_macinfo" section.
Differential Revision: http://reviews.llvm.org/D14294
llvm-svn: 252866
Not only do we not need to do anything to read correct values from the
object files, but the current logic actually wrongly applies twice the
section base address when there is no LoadedObjectInfo passed to the
DWARFContext creation (as the added test shows).
Simply do not apply any relocations on the mach-o debug info if there is
no load offset to apply.
llvm-svn: 245807
When encountering a scattered relocation, the code would assert trying to
access an unexisting section. I couldn't find a way to expose the result
of the processing of a scattered reloc, and I'm really unsure what the
right thing to do is. This patch just skips them during the processing in
DwarfContext and adds a mach-o file to the tests that exposed the asserting
behavior.
(This is a new failure that is being exposed by Rafael's recent work on
the libObject interfaces. I think the wrong behavior has always happened,
but now it's asserting)
llvm-svn: 243778
