This can be seen as a follow up to commit 0ee439b705e82a4fe20e2,
that changed the second argument of __powidf2, __powisf2 and
__powitf2 in compiler-rt from si_int to int. That was to align with
how those runtimes are defined in libgcc.
One thing that seem to have been missing in that patch was to make
sure that the rest of LLVM also handle that the argument now depends
on the size of int (not using the si_int machine mode for 32-bit).
When using __builtin_powi for a target with 16-bit int clang crashed.
And when emitting libcalls to those rtlib functions, typically when
lowering @llvm.powi), the backend would always prepare the exponent
argument as an i32 which caused miscompiles when the rtlib was
compiled with 16-bit int.
The solution used here is to use an overloaded type for the second
argument in @llvm.powi. This way clang can use the "correct" type
when lowering __builtin_powi, and then later when emitting the libcall
it is assumed that the type used in @llvm.powi matches the rtlib
function.
One thing that needed some extra attention was that when vectorizing
calls several passes did not support that several arguments could
be overloaded in the intrinsics. This patch allows overload of a
scalar operand by adding hasVectorInstrinsicOverloadedScalarOpd, with
an entry for powi.
Differential Revision: https://reviews.llvm.org/D99439
extractelement is poison if the index is out-of-bounds, so just
scalarizing the load may introduce an out-of-bounds load, which is UB.
To avoid introducing new UB, we can mask the index so it only contains
valid indices.
Fixes PR50382.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D103077
Support virtual, physical and tied i128 register operands in inline assembly.
i128 is on SystemZ not really supported and is not a legal type and generally
such a value will be split into two i64 parts. There are however some
instructions that require a pair of two GPR64 registers contained in the GR128
bit reg class, which is untyped.
For inline assmebly operands, it proved to be very cumbersome to first follow
the general behavior of splitting an i128 operand into two parts and then
later rebuild the INLINEASM MI to have one GR128 register. Instead, some
minor common code changes were made to SelectionDAGBUilder to only create one
GR128 register part to begin with. In particular:
- getNumRegisters() now has an optional parameter "RegisterVT" which is
passed by AddInlineAsmOperands() and GetRegistersForValue().
- The bitcasting in GetRegistersForValue is not performed if RegVT is
Untyped.
- The RC for a tied use in AddInlineAsmOperands() is now computed either from
the tied def (virtual register), or by getMinimalPhysRegClass() (physical
register).
- InstrEmitter.cpp:EmitCopyFromReg() has been fixed so that the register
class (DstRC) can also be computed for an illegal type.
In the SystemZ backend getNumRegisters(), splitValueIntoRegisterParts() and
joinRegisterPartsIntoValue() have been implemented to handle i128 operands.
Differential Revision: https://reviews.llvm.org/D100788
Review: Ulrich Weigand
Since d6de1e1a71406c75a4ea4d5a2fe84289f07ea3a1, no attributes is quivalent to
setting attribute to false.
This is a preliminary commit for https://reviews.llvm.org/D99080
Expand 128 bit shifts instead of using a libcall.
This patch removes the 128 bit shift libcalls and thereby causes
ExpandShiftWithUnknownAmountBit() to be called.
Review: Ulrich Weigand
Differential Revision: https://reviews.llvm.org/D101993
In order to use __builtin_frame_address(0) with packed stack and no
backchain, the address of where the backchain would have been written is
returned (like GCC).
This address may either contain a saved register or be unused.
Review: Ulrich Weigand
Differential Revision: https://reviews.llvm.org/D101897
Even though the implementation in emitAtomicCmpSwapW() was correct, it made
Valgrind report an error. Instead of using a RISBG on CmpVal, an LL[CH]R can
be made on the OldVal, and the problem is avoided.
Review: Ulrich Weigand
Differential Revision: https://reviews.llvm.org/D97604
When a large "irregular" (e.g. i96) integer call argument is converted to
indirect, 64-bit parts are stored to the stack. The full stack space
(e.g. i128) was not allocated prior to this patch, but rather just the exact
space of the original type. This caused neighboring values on the stack to be
overwritten.
Thanks to Josh Stone for reporting this.
Review: Ulrich Weigand
Fixes https://bugs.llvm.org/show_bug.cgi?id=49322
Differential Revision: https://reviews.llvm.org/D97514
This patch adds each pass' pass argument in the header for IR dumps.
For example:
Before:
```
*** IR Dump Before InstructionSelect ***
```
After:
```
*** IR Dump Before InstructionSelect (instruction-select) ***
```
The goal is to make it easier to know what argument to pass to
command line options like `debug-only` or `run-pass` to further
investigate a given pass.
Separate the LoZ ELF calling convention in tablegen.
This will make it easier to add the z/OS ABI in future patches.
Reviewed By: uweigand
Differential Revision: https://reviews.llvm.org/D96867
Fixes a bug introduced by D91589.
When folding `(sext (not i1 x)) -> (add (zext i1 x), -1)`, we try to replace the not first when possible. If we replace the not in-visit, then the now invalidated node will be returned, and subsequently we will return an invalid sext. In cases where the not is replaced in-visit we can simply return SDValue, as the not in the current sext should have already been replaced.
Thanks @jgorbe, for finding the below reproducer.
The following reduced test case crashes clang when built with `clang -O1 -frounding-math`:
```
template <class> class a {
int b() { return c == 0.0 ? 0 : -1; }
int c;
};
template class a<long>;
```
A debug build of clang produces this "assertion failed" error:
```
clang: /home/jgorbe/code/llvm/llvm/lib/CodeGen/SelectionDAG/DAGCombiner.cpp:264: void {anonymous}::DAGCombiner::AddToWorklist(llvm::
SDNode*): Assertion `N->getOpcode() != ISD::DELETED_NODE && "Deleted Node added to Worklist"' failed.
```
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D93274
Current approach doesn't work well in cases when multiple paths are predicted to be "cold". By "cold" paths I mean those containing "unreachable" instruction, call marked with 'cold' attribute and 'unwind' handler of 'invoke' instruction. The issue is that heuristics are applied one by one until the first match and essentially ignores relative hotness/coldness
of other paths.
New approach unifies processing of "cold" paths by assigning predefined absolute weight to each block estimated to be "cold". Then we propagate these weights up/down IR similarly to existing approach. And finally set up edge probabilities based on estimated block weights.
One important difference is how we propagate weight up. Existing approach propagates the same weight to all blocks that are post-dominated by a block with some "known" weight. This is useless at least because it always gives 50\50 distribution which is assumed by default anyway. Worse, it causes the algorithm to skip further heuristics and can miss setting more accurate probability. New algorithm propagates the weight up only to the blocks that dominates and post-dominated by a block with some "known" weight. In other words, those blocks that are either always executed or not executed together.
In addition new approach processes loops in an uniform way as well. Essentially loop exit edges are estimated as "cold" paths relative to back edges and should be considered uniformly with other coldness/hotness markers.
Reviewed By: yrouban
Differential Revision: https://reviews.llvm.org/D79485
- New function SDValue getBackchainAddress() used by
lowerDYNAMIC_STACKALLOC() and lowerSTACKRESTORE() to properly handle the
backchain offset also with packed-stack.
- Make a common function getBackchainOffset() for the computation of the
backchain offset and use in some places (NFC).
Review: Ulrich Weigand
Differential Revision: https://reviews.llvm.org/D93171
The loop-based probing done for stack clash protection altered R1D which
corrupted the backchain value to be stored after the probing was done.
By using R0D instead for the loop exit value, R1D is not modified.
Review: Ulrich Weigand.
Differential Revision: https://reviews.llvm.org/D92803
FEntryInserter prepends FENTRY_CALL to the first basic block. In case
there are other instructions, PostRA Machine Instruction Scheduler can
move FENTRY_CALL call around. This actually occurs on SystemZ (see the
testcase). This is bad for the following reasons:
* FENTRY_CALL clobbers registers.
* Linux Kernel depends on whatever FENTRY_CALL expands to to be the very
first instruction in the function.
Fix by adding isCall attribute to FENTRY_CALL, which prevents reordering
by making it a scheduling boundary for PostRA Machine Instruction
Scheduler.
Reviewed By: niravd
Differential Revision: https://reviews.llvm.org/D91218
Move fold of (sext (not i1 x)) -> (add (zext i1 x), -1) from X86 to DAGCombiner to improve codegen on other targets.
Differential Revision: https://reviews.llvm.org/D91589
They are currently implicit because TargetMachine::shouldAssumeDSOLocal implies
dso_local.
For such function declarations, clang -fno-pic emits the dso_local specifier.
Adding explicit dso_local makes these tests align with the clang behavior and
helps implementing an option to use GOT indirection when taking the address of a
function symbol in -fno-pic (to avoid a canonical PLT entry (SHN_UNDEF with
non-zero st_value)).
They are currently implicit because TargetMachine::shouldAssumeDSOLocal implies
dso_local.
For external data, clang -fno-pic emits the dso_local specifier for ELF and
non-MinGW COFF. Adding explicit dso_local makes these tests in align with the
clang behavior and helps implementing an option to use GOT indirection for
external data access in -fno-pic mode (to avoid copy relocations).
This value had the default value of 4 which caused branch relaxation to fail.
Review: Ulrich Weigand
Differential Revision: https://reviews.llvm.org/D90065
Some of our conversion algorithms produce -0.0 when converting unsigned i64 to double when the rounding mode is round toward negative. This switches them to other algorithms that don't have this problem. Since it is undefined behavior to change rounding mode with the non-strict nodes, this patch only changes the behavior for strict nodes.
There are still problems with unsigned i32 conversions too which I'll try to fix in another patch.
Fixes part of PR47393
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D87115
For historical reasons, the R6 register is a callee-saved argument
register. This means that if it is used to pass an argument to a function
that does not clobber it, it is live throughout the function.
This patch makes sure that in this special case any kill flags of it are
removed.
Review: Ulrich Weigand, Eli Friedman
Differential Revision: https://reviews.llvm.org/D89451
In order to correctly load an all-ones FP NaN value into a floating point
register with a VGBM, the analyzed 32/64 FP bits must first be shifted left
(into element 0 of the vector register).
SystemZVectorConstantInfo has so far relied on element replication which has
bypassed the need to do this shift, but now it is clear that this must be
done in order to handle NaNs.
Review: Ulrich Weigand
Differential Revision: https://reviews.llvm.org/D89389
In the presence of packed structures (#pragma pack(1)) where elements are
referenced through pointers, there will be stores/loads with alignment values
matching the default alignments for the element types while the elements are
in fact unaligned. Strictly speaking this is incorrect source code, but is
unfortunately part of existing code and therefore now addressed.
This patch improves the pattern predicate for PC-relative loads and stores by
not only checking the alignment value of the instruction, but also making
sure that the symbol (and element) itself is aligned.
Fixes https://bugs.llvm.org/show_bug.cgi?id=44405
Review: Ulrich Weigand
Differential Revision: https://reviews.llvm.org/D87510
This rewrites big parts of the fast register allocator. The basic
strategy of doing block-local allocation hasn't changed but I tweaked
several details:
Track register state on register units instead of physical
registers. This simplifies and speeds up handling of register aliases.
Process basic blocks in reverse order: Definitions are known to end
register livetimes when walking backwards (contrary when walking
forward then uses may or may not be a kill so we need heuristics).
Check register mask operands (calls) instead of conservatively
assuming everything is clobbered. Enhance heuristics to detect
killing uses: In case of a small number of defs/uses check if they are
all in the same basic block and if so the last one is a killing use.
Enhance heuristic for copy-coalescing through hinting: We check the
first k defs of a register for COPYs rather than relying on there just
being a single definition. When testing this on the full llvm
test-suite including SPEC externals I measured:
average 5.1% reduction in code size for X86, 4.9% reduction in code on
aarch64. (ranging between 0% and 20% depending on the test) 0.5%
faster compiletime (some analysis suggests the pass is slightly slower
than before, but we more than make up for it because later passes are
faster with the reduced instruction count)
Also adds a few testcases that were broken without this patch, in
particular bug 47278.
Patch mostly by Matthias Braun
This removes the after the fact FMF handling from D46854 in favor of passing fast math flags to getNode. This should be a superset of D87130.
This required adding a SDNodeFlags to SelectionDAG::getSetCC.
Now we manage to contant fold some stuff undefs during the
initial getNode that we don't do in later DAG combines.
Differential Revision: https://reviews.llvm.org/D87200
On SystemZ, a ZERO_EXTEND of an i1 vector handled by WidenVecRes_Convert()
always ended up being scalarized, because the type action of the input is
promotion which was previously an unhandled case in this method.
This fixes https://bugs.llvm.org/show_bug.cgi?id=47132.
Differential Revision: https://reviews.llvm.org/D86268
Patch by Eli Friedman.
Review: Ulrich Weigand
Previously SDNodeFlags::instersectWith(Flags) would do nothing if Flags was
in an undefined state, which is very bad given that this is the default when
getNode() is called without passing an explicit SDNodeFlags argument.
This meant that if an already existing and reused node had a flag which the
second caller to getNode() did not set, that flag would remain uncleared.
This was exposed by https://bugs.llvm.org/show_bug.cgi?id=47092, where an NSW
flag was incorrectly set on an add instruction (which did in fact overflow in
one of the two original contexts), so when SystemZElimCompare removed the
compare with 0 trusting that flag, wrong-code resulted.
There is more that needs to be done in this area as discussed here:
Differential Revision: https://reviews.llvm.org/D86871
Review: Ulrich Weigand, Sanjay Patel
Similarly as for pointers, even for integers a == b is usually false.
GCC also uses this heuristic.
Reviewed By: ebrevnov
Differential Revision: https://reviews.llvm.org/D85781
