Add assembler support for all atomic instructions that weren't already
supported. Some of those could be used to implement codegen for 128-bit
atomic operations, but this isn't done here yet.
llvm-svn: 288526
Add assembler support for instructions manipulating the FPC.
Also add codegen support via the GCC compatibility builtins:
__builtin_s390_sfpc
__builtin_s390_efpc
llvm-svn: 288525
not all lakemont MCU support long nop.
we can't assume we can generate long nop by default for MCU.
Differential Revision: https://reviews.llvm.org/D26895
llvm-svn: 288363
Summary:
This is preparation for ThunderX processors that have Large
System Extension (LSE) atomic instructions, but not the
other instructions introduced by V8.1a.
This will mimic changes to GCC as described here:
https://gcc.gnu.org/ml/gcc-patches/2015-06/msg00388.html
LSE instructions are: LD/ST<op>, CAS*, SWP
Reviewers: t.p.northover, echristo, jmolloy, rengolin
Subscribers: aemerson, mehdi_amini
Differential Revision: https://reviews.llvm.org/D26621
llvm-svn: 288279
This is not in the list of valid inputs for the encoding.
When spilling, copies from exec can be folded directly
into the spill instruction which results in broken
stores.
This only fixes the operand constraints, more codegen
work is required to avoid emitting the invalid
spills.
This sort of breaks the dbg.value test. Because the
register class of the s_load_dwordx2 changes, there
is a copy to SReg_64, and the copy is the operand
of dbg_value. The copy is later dead, and removed
from the dbg_value.
llvm-svn: 288191
This adds assembler support for the instructions provided by the
execution-hint facility (NIAI and BP(R)P). This required adding
support for the new relocation types for 12-bit and 24-bit PC-
relative offsets used by the BP(R)P instructions.
llvm-svn: 288031
This patch adds assembler support for the remaining branch instructions:
the non-relative branch on count variants, and all variants of branch
on index.
The only one of those that can be readily exploited for code generation
is BRCTH (branch on count using a high 32-bit register as count). Do
use it, however, it is necessary to also introduce a hew CHIMux pseudo
to allow comparisons of a 32-bit value agains a short immediate to go
into a high register as well (implemented via CHI/CIH).
This causes a bit of codegen changes overall, but those have proven to
be neutral (or even beneficial) in performance measurements.
llvm-svn: 288029
This patch moves formation of LOC-type instructions from (late)
IfConversion to the early if-conversion pass, and in some cases
additionally creates them directly from select instructions
during DAG instruction selection.
To make early if-conversion work, the patch implements the
canInsertSelect / insertSelect callbacks. It also implements
the commuteInstructionImpl and FoldImmediate callbacks to
enable generation of the full range of LOC instructions.
Finally, the patch adds support for all instructions of the
load-store-on-condition-2 facility, which allows using LOC
instructions also for high registers.
Due to the use of the GRX32 register class to enable high registers,
we now also have to handle the cases where there are still no single
hardware instructions (conditional move from a low register to a high
register or vice versa). These are converted back to a branch sequence
after register allocation. Since the expandRAPseudos callback is not
allowed to create new basic blocks, this requires a simple new pass,
modelled after the ARM/AArch64 ExpandPseudos pass.
Overall, this patch causes significantly more LOC-type instructions
to be used, and results in a measurable performance improvement.
llvm-svn: 288028
This patch corrects the behaviour of code such as:
.local foo
jal foo
foo:
to use the correct jal expansion when writing ELF files.
Patch by: Daniel Sanders
Reviewers: zoran.jovanovic, seanbruno, vkalintiris
Differential Revision: https://reviews.llvm.org/D24722
llvm-svn: 287918
Add missing unaligned store macros (ush/usw) and fix the exisiting
implementation of the unaligned load macros in order to generate
identical expansions with the GNU assembler.
llvm-svn: 287646
We would attempt to access the symbol section without ensuring that the symbol
was not absolute. When the assembler referenced relocation is not evaluated to
the absolute, but when we record the relocation, we would query the section.
Because the symbol is absolute, it does not have a section associated with it,
triggering an assertion. Just be more careful about the access of the section.
Addresses PR31064!
llvm-svn: 287619
This patch adds the seq macro.
This partially resolves PR/30381.
Thanks to Sean Bruno for reporting the issue!
Reviewers: zoran.jovanovic, vkalintiris, seanbruno
Differential Revision: https://reviews.llvm.org/D24607
llvm-svn: 287573
This patch adds the single operand form of the not alias to microMIPS and
MIPS along with additional tests.
This partially resolves PR/30381.
Thanks to Sean Bruno for reporting the issue!
llvm-svn: 287097
-Don't print the 'x' suffix for the 128-bit reg/mem VEX encoded instructions in Intel syntax. This is consistent with the EVEX versions.
-Don't print the 'y' suffix for the 256-bit reg/reg VEX encoded instructions in Intel or AT&T syntax. This is consistent with the EVEX versions.
-Allow the 'x' and 'y' suffixes to be used for the reg/mem forms when we're assembling using Intel syntax.
-Allow the 'x' and 'y' suffixes on the reg/reg EVEX encoded instructions in Intel or AT&T syntax. This is consistent with what VEX was already allowing.
This should fix at least some of PR28850.
llvm-svn: 286787
This adds support for the compare logical and trap (memory)
instructions that were added as part of the miscellaneous
instruction extensions feature with zEC12.
llvm-svn: 286587
This adds support for the LZRF/LZRG/LLZRGF instructions that were
added on z13, and uses them for code generation were appropriate.
SystemZDAGToDAGISel::tryRISBGZero is updated again to prefer LLZRGF
over RISBG where both would be possible.
llvm-svn: 286586
This adds support for the 31-to-64-bit zero extension instructions
LLGT and LLGTR and uses them for code generation where appropriate.
Since this operation can also be performed via RISBG, we have to
update SystemZDAGToDAGISel::tryRISBGZero so that we prefer LLGT
over RISBG in case both are possible. The patch includes some
simplification to the tryRISBGZero code; this is not intended
to cause any (further) functional change in codegen.
llvm-svn: 286585
The version of this instruction with the .w suffix already correctly accepts
this, but the alias without the .w did not.
Differential Revision: https://reviews.llvm.org/D26499
llvm-svn: 286446
This completes assembler / disassembler support for all BFP
instructions provided by the floating-point extensions facility.
The instructions added here are not currently used for codegen.
llvm-svn: 286285
Add several instructions that operate on the program mask
or the addressing mode. These are not really needed for
code generation under Linux, but are provided for completeness
for the assembler/disassembler.
llvm-svn: 286284
Add the 16 access registers as LLVM registers. This allows removing
a lot of special cases in the assembler and disassembler where we
were handling access registers; this can all just use the generic
register code now.
Also add a bunch of instructions to operate on access registers,
for assembler/disassembler use only. No change in code generation
intended.
llvm-svn: 286283
Rework patterns for branches, call & return instructions,
compare-and-branch, compare-and-trap, and conditional move
instructions.
In particular, simplify creation of patterns for the extended
opcodes of instructions that take a CC mask.
Also, use semantical instruction classes for all the instructions
instead of open-coding them in SystemZInstrInfo.td.
Adds a couple of the basic branch instructions (that are unused
for codegen) for the assembler/disassembler.
llvm-svn: 286263
Summary: This patch returns the same label if the CP entry with the same value has been created.
Reviewers: eli.friedman, rengolin, jmolloy
Subscribers: majnemer, jmolloy, llvm-commits
Differential Revision: https://reviews.llvm.org/D25804
llvm-svn: 286006
Fixes Bug 30808.
Note that passing subtarget information to predicates seems too complicated, so gfx8-specific def smrd_offset_20 introduced.
Old gfx6/7-specific def renamed to smrd_offset_8 for clarity.
Lit tests updated.
Differential Revision: https://reviews.llvm.org/D26085
llvm-svn: 285590
This patch implements two changes:
- Move processor feature definition into a new file SystemZFeatures.td,
and provide explicit lists of supported and unsupported features for
each level of the z/Architecture. This allows specifying unsupported
features in the scheduler definition files for each processor.
- Add optional aliases for the -mcpu processor names according to the
level of the z/Architecture, for compatibility with other compilers
on the platform. The supported aliases are:
-mcpu=arch8 equals -mcpu=z10
-mcpu=arch9 equals -mcpu=z196
-mcpu=arch10 equals -mcpu=zEC12
-mcpu=arch11 equals -mcpu=z13
llvm-svn: 285577
Currently, when using an instruction that is not supported on the
currently selected architecture, the LLVM assembler is likely to
diagnose an "invalid operand" instead of a "missing feature".
This is because many operands require a custom parser in order to
be processed correctly, and if an instruction is not available
according to the current feature set, the generated parser code
will also not detect the associated custom operand parsers.
Fixed by temporarily enabling all features while parsing operands.
The missing features will then be correctly detected when actually
parsing the instruction itself.
llvm-svn: 285575
LLVM currently treats the first operand of MVCK as if it were a
regular base+index+displacement address. However, it is in fact
a base+displacement combined with a length register field.
While the two might look syntactically similar, there are two
semantic differences:
- %r0 is a valid length register, even though it cannot be used
as an index register.
- In an expression with just a single register like 0(%rX), the
register is treated as base with normal addresses, while it is
treated as the length register (with an empty base) for MVCK.
Fixed by adding a new operand parser class BDRAddr and reworking
the assembler parser to distinguish between address + length
register operands and regular addresses.
llvm-svn: 285574
Also add glc bit to the scalar loads since they exist on VI
and change the caching behavior.
This currently has an assembler bug where the glc bit is incorrectly
accepted on SI/CI which do not have it.
llvm-svn: 285463
In the past the compiler always emitted .debug_line version 2, though some opcodes from DWARF 3 (e.g. DW_LNS_set_prologue_end, DW_LNS_set_epilogue_begin or DW_LNS_set_isa) and from DWARF 4 could be emitted by the compiler.
This patch changes version information of .debug_line to exactly match the DWARF version. For .debug_line version 4, a new field maximum_operations_per_instruction is emitted.
Differential Revision: https://reviews.llvm.org/D16697
llvm-svn: 285355
Fix AsmParser lines to correctly handle end-of-line pre-processor
comments parsing when '#' is not the assembly line comment prefix.
Reviewers: rnk
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D25567
llvm-svn: 284978
Summary:
Add relocations for AArch64 ILP32. Includes:
- Addition of definitions for R_AARCH32_*
- Definition of new -target-abi: ilp32
- Definition of data layout string
- Tests for added relocations. Not comprehensive, but matches
existing tests for 64-bit. Renames "CHECK-OBJ" to "CHECK-OBJ-LP64".
- Tests for llvm-readobj
Reviewers: zatrazz, peter.smith, echristo, t.p.northover
Subscribers: aemerson, rengolin, mehdi_amini
Differential Revision: https://reviews.llvm.org/D25159
llvm-svn: 284973
