This option is already supported by update_test_checks.py, but it can
also be useful in update_cc_test_checks.py. For example, I'd like to
use it in OpenMP offload codegen tests to check global variables like
`.offload_maptypes*`.
Reviewed By: jdoerfert, arichardson, ggeorgakoudis
Differential Revision: https://reviews.llvm.org/D104714
Some parts of common.py already permit comment styles besides `;`.
Handle the remaining cases. Specifically, a future patch will extend
update_cc_test_checks.py to call add_global_checks.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D104713
Without this patch, llvm/utils/update_cc_test_checks.py fails to
perform `--replace-value-regex` replacements when two RUN lines
produce the same output and use the same single FileCheck prefix. The
problem is that replacements in a RUN line's output are not performed
until after comparing against previous RUN lines' output, where
replacements have already been performed. This patch fixes that.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D104566
Now that FileCheck eagerly complains when prefixes are unused,
the update script does the same, and is becoming very common
to need to drop some prefixes, yet figuring out the file
it complains about isn't obvious unless it actually tells us.
True is a bad default: the useful symbol names and `@GOTPCREL` are scrubbed.
Change the default and add global variable tests to x86-basic.ll
(renamed from x86_function_name.ll since we now also test variables).
I updated some tests to show the differences.
Updated LCPI regex to include Darwin style `LCPI_[0-9]+_[0-9]+` (no
leading dot).
Reviewed By: pengfei
Differential Revision: https://reviews.llvm.org/D102588
This patch renames the replace-function-regex to replace-value-regex to indicate that the existing regex replacement functionality can replace any IR value besides functions.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D101934
This has been rather useful in our downstream CHERI target where we want
to run tests both with addrspace(0) and addrspace(200) pointers.
With this patch we can prefix the opt command with
`sed -e 's/addrspace(200)/addrspace(0)/g' -e 's/-A200-P200-G200//g'` to
test both cases using the same IR input.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D95137
While working on D97208 I noticed that these greedy regular
expressions prevent tests from failing when (%rip) appears after
a constant pool label when it didn't before.
Reviewed By: RKSimon, pengfei
Differential Revision: https://reviews.llvm.org/D99460
IR values convert to check prefix FileCheck variables for IR checks. For example, nameless values, e.g., %0, convert to check prefix TMP FileCheck variables, e.g., [[TMP0:%.*]]. This check prefix may clash with named values that have the same name and that causes auto-generated tests to fail. Currently a warning is emitted to change the names of the IR values but this is not always possible, if for example they are generated by clang. Manual intervention to fix the FileCheck variable names is too tedious. This patch add a parameter to prefix conflicting FileCheck variable names with a user-provided string to automate the process.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D99415
The patch adds an argument to update test scripts, such as update_cc_test_checks, for replacing a function name matching a regex. This functionality is needed to match generated function signatures that include file hashes. Example:
The function signature for the following function:
`__omp_offloading_50_b84c41e__Z9ftemplateIiET_i_l30_worker`
with `--replace-function-regex "__omp_offloading_[0-9]+_[a-z0-9]+_(.*)"` will become:
`CHECK-LABEL: @{{__omp_offloading_[0-9]+_[a-z0-9]+__Z9ftemplateIiET_i_l30_worker}}(`
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D97107
The patch adds an argument to update test scripts, such as update_cc_test_checks, for replacing a function name matching a regex. This functionality is needed to match generated function signatures that include file hashes. Example:
The function signature for the following function:
`__omp_offloading_50_b84c41e__Z9ftemplateIiET_i_l30_worker`
with `--replace-function-regex "__omp_offloading_[0-9]+_[a-z0-9]+_(.*)"` will become:
`CHECK-LABEL: @{{__omp_offloading_[0-9]+_[a-z0-9]+__Z9ftemplateIiET_i_l30_worker}}(`
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D97107
This allows to check for various globals (metadata/attributes/...) and
also resolves problems with globals (metadata/attributes/...) being
reused across different prefixes.
Reviewed By: sstefan1
Differential Revision: https://reviews.llvm.org/D94741
The patch adds an argument to update_cc_test_checks for replacing a function name matching a regex. This functionality is needed to match generated function signatures that include file hashes. Example:
The function signature for the following function:
`__omp_offloading_50_b84c41e__Z9ftemplateIiET_i_l30_worker`
with `--replace-function-regex "__omp_offloading_[0-9]+_[a-z0-9]+_(.*)"` will become:
`CHECK-LABEL: @{{__omp_offloading_[0-9]+_[a-z0-9]+__Z9ftemplateIiET_i_l30_worker}}(`
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D97107
And a small utilities -- extract-section.py -- that helps extracting
specific object file section and printing in textual format. This
utility is just a workaround for tests inside `Encoding`. Hopefully in
the future we can replace dependencies in those tests with existing tools
(e.g. llvm-readobj). Please refer to this bug for more context:
https://bugs.llvm.org/show_bug.cgi?id=49245
Note that since we don't have AsmParser for now, we are testing the MC
part using MIR as input and put those tests under the `Encoding` folder.
In the future when AsmParser (and disassembler) is finished, those tests
will be moved to `test/MC/M68k`.
Authors: myhsu, m4yers, glaubitz
Differential Revision: https://reviews.llvm.org/D88392
The switch controls both unused prefix warnings, and warnings about
functions which differ under different runs for a prefix, and, thus, end
up not having asserts for that prefix.
(If the latter case spans to all functions, then the former case kicks
in)
The switch is on by default, and can be disabled.
Differential Revision: https://reviews.llvm.org/D95829
Current update_llc_test_checks.py cannot generate checks for AIX
(powerpc64-ibm-aix-xcoff) properly. Assembly generated is little bit
different from Linux. So I use begin function comment here to capture
function name.
Reviewed By: MaskRay, steven.zhang
Differential Revision: https://reviews.llvm.org/D93676
This allows us to have shared logic over multiple test runs, e.g. do we
have unused prefixes, or which function bodies have conflicting outputs
for a prefix appearing in different RUN lines.
This patch is just wrapping existing functionality, and replacing its uses.
A subsequent patch would then fold the current functionality into the newly
introduced class.
Differential Revision: https://reviews.llvm.org/D93413
Follow up from D92965 - since we try to find failed prefixes
after each RUN line, it's possible the whole list of functions for a
prefix be non-existent, which is fine - this happens when none of the
RUN lines seen so far used the prefix.
Two RUN lines produce outputs that, each, have some common parts and
some different parts. The common parts are checked under label A. The
differing parts are associated to a function and checked under labels B
and C, respectivelly.
When build_function_body_dictionary is called for the first RUN line, it
will attribute the function body to labels A and C. When the second RUN
is passed to build_function_body_dictionary, it sees that the function
body under A is different from what it has. If in this second RUN line,
A were at the end of the prefixes list, A's body is still kept
associated with the first run's function.
When we output the function body (i.e. add_checks), we stop after
emitting for the first prefix matching that function. So we end up with
the wrong function body (first RUN's A-association).
There is no reason to special-case the last label in the prefixes list,
and the fix is to always clear a label association if we find a RUN line
where the body is different.
Differential Revision: https://reviews.llvm.org/D93078
This makes it possible to use update_llc_test_checks to manage tests
that check for incorrect x86 stack offsets. It does not yet modify any
test to make use of this new option.
This also teaches MachO writers/readers about the MachO cpu subtype,
beyond the minimal subtype reader support present at the moment.
This also defines a preprocessor macro to allow users to distinguish
__arm64__ from __arm64e__.
arm64e defaults to an "apple-a12" CPU, which supports v8.3a, allowing
pointer-authentication codegen.
It also currently defaults to ios14 and macos11.
Differential Revision: https://reviews.llvm.org/D87095
Add the --include-generated-funcs option to update_cc_test_checks.py so that any
functions created by the compiler that don't exist in the source will also be
checked.
We need to maintain the output order of generated function checks so that
CHECK-LABEL works properly. To do so, maintain a list of functions output for
each prefix in the order they are output. Use this list to output checks for
generated functions in the proper order.
Differential Revision: https://reviews.llvm.org/D83004
Some compilers generation functions with '$' in their names, so recognize those
functions.
This also requires recognizing function names inside quotes in some contexts in
order to escape certain characters.
Differential Revision: https://reviews.llvm.org/D82995
After D85099, if we have attribute group in the function signature that hasn't
been seen before, and later a callsite with the same attribute group, filecheck will evaluate
the first attribute group to for example '#0 {'. We now include { in the args_and_sig group to avoid this.
Differential Revision: https://reviews.llvm.org/D86769
Some functions also include a `.Lfunc$local:` label due to
-fno-semantic-interposition
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D85888
With this patch we will match most *uses* of "temporary" named things in
the IR via regular expressions, not their name at creation time. The new
"values" we match are:
- "unnamed" globals: `@[0-9]+`
- debug metadata: `!dbg ![0-9]+`
- loop metadata: `!loop ![0-9]+`
- tbaa metadata: `!tbaa ![0-9]+`
- range metadata: `!range ![0-9]+`
- generic metadata: `metadata ![0-9]+`
- attributes groups: `#[0-9]`
We still don't match the declarations but that can be done later. This
patch can introduce churn when existing check lines contain the old
hardcoded versions of the above "values". We can add a flag to opt-out,
or opt-in, if necessary.
Reviewed By: arichardson, MaskRay
Differential Revision: https://reviews.llvm.org/D85099
Not passing --clang would result in a python exception after this change:
(TypeError: expected str, bytes or os.PathLike object, not NoneType)
because the --clang argument default was only being populated in the
initial argument parsing pass but not later on.
Fix this by adding an argparse callback to set the default values.
Reviewed By: vitalybuka, MaskRay
Differential Revision: https://reviews.llvm.org/D84511
Summary:
This introduces new flag to the update_test_checks and
update_cc_test_checks that allows for function attributes
to be checked in a check-line. If the flag is not set,
the behavior should remain the same.
Reviewers: jdoerfert
Subscribers: arichardson, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D83629
I intend to reuse this to add UTC_ARGS support for update_llc_test_checks.py
and update_cc_test_checks.py in D78478.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D78618
