Summary:
We already have the hashes in hand, and comparing hashes should be much
more discriminatory than comparing the StringRefs' sizes.
Reviewers: rafael
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D25705
llvm-svn: 284872
Summary:
This is like CachedHashStringRef, but owns its data.
This lets us use strings inside of DenseMaps.
Reviewers: timshen
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D25645
llvm-svn: 284871
Summary:
A CallSite is basically an Instruction*, and you can put Instruction*s
into DenseMaps, so you should be able to do the same with CallSites.
This is used in a later patch.
Reviewers: timshen
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D25643
llvm-svn: 284870
Summary:
When SCEVRewriteVisitor traverses the SCEV DAG, it may visit the same SCEV
multiple times if this SCEV is referenced by multiple other SCEVs. This has
exponential time complexity in the worst case. Memoizing the results will
avoid re-visiting the same SCEV. Add a map to save the results, and override
the visit function of SCEVVisitor. Now SCEVRewriteVisitor only visit each
SCEV once and thus returns the same result for the same input SCEV.
This patch fixes PR18606, PR18607.
Reviewers: Sanjoy Das, Mehdi Amini, Michael Zolotukhin
Differential Revision: https://reviews.llvm.org/D25810
llvm-svn: 284868
iterating over an archive with object and non-object members that
would cause an Abort because to was not calling consumeError()
when the code was wanting to ignore a non-object file.
Found by Justin Bogner!
llvm-svn: 284867
If a 64-bit value is tested against a bit which is known to be in the range
[0..31) (modulo 64), we can use the 32-bit BT instruction, which has a slightly
shorter encoding.
Differential Revision: https://reviews.llvm.org/D25862
llvm-svn: 284864
Summary: This adds support for dumping the globals stream from PDB files using llvm-pdbdump, similar to the support we have for the publics stream.
Reviewers: ruiu, zturner
Subscribers: beanz, mgorny, modocache
Differential Revision: https://reviews.llvm.org/D25801
llvm-svn: 284861
Summary:
Utility pass to remove gc.relocates created by rewrite statepoints for GC.
With respect to safepoint verification, the IR generated would be incorrect, and cannot run
as such.
This would be a single transformation on the final optimized IR.
The benefit of the pass is for easy analysis when the IRs are 'polluted' by too
many gc.relocates.
Added tests.
test run: All RS4GC tests with -verify option. Local downstream tests on large
IR files. This also works when the pointer being gc.relocated is another
gc.relocate.
Reviewers: sanjoy, reames
Subscribers: beanz, mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D25096
llvm-svn: 284855
the ARM_THREAD_STATE in the same format as
otool-classic(1) on darwin.
Also remove an extra space in printing the initprot to make
the output match otool-classic(1) on darwin.
rdar://28851457
llvm-svn: 284852
0 - X --> 0, if the sub is NUW
0 - X --> 0, if X is 0 or the minimum signed value and the sub is NSW
0 - X --> X, if X is 0 or the minimum signed value
This is the DAG equivalent of:
https://reviews.llvm.org/rL284649
plus the fold for the NUW case which already existed in InstSimplify.
Note that we miss a vector fold because of a deficiency in the DAG version of
computeKnownBits().
llvm-svn: 284844
These are the backend equivalents for the tests added in r284627.
The patterns may emerge late, so we should have folds for these in the DAG too.
llvm-svn: 284842
After register allocation it is possible to have a spill of a register
that is only partially defined. That in itself it fine, but creates a
problem for double vector registers. Stores of such registers are pseudo
instructions that are expanded into pairs of individual vector stores,
and in case of a partially defined source, one of the stores may use
an entirely undefined register. To avoid this, track the defined parts
and only generate actual stores for those.
llvm-svn: 284841
Summary:
Need to reorder the operands to have the callee as the last argument.
Adds a pseudo-instruction, and a pass to lower it into a real
call_indirect.
This is the first of two options for how to fix the problem.
Reviewers: dschuff, sunfish
Subscribers: jfb, beanz, mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D25708
llvm-svn: 284840
Because we're just 'or-ing' these 2 variables later in the code, I
don't think there's a logical bug here, but of course the string with
"no size" is the one that should have the size suffix stripped off.
llvm-svn: 284826
As discussed in D24815, let's start the process of killing off the broken fast-math global
state housed in TargetOptions and eliminate the need for function-level fast-math attributes.
Here we enable two similar folds that are possible when we don't care about signed-zero:
fadd nsz x, 0 --> x
fsub nsz 0, x --> -x
Note that although the test cases include a 'sin' function call, I'm side-stepping the
FMF-on-calls question (and lack of support in the DAG) for now. It's not needed for these
tests - isNegatibleForFree/GetNegatedExpression just look through a ISD::FSIN node.
Also, when we create an FNEG node and propagate the Flags of the FSUB to it, this doesn't
actually do anything today because Flags are silently dropped for any node that is not a
binary operator.
Differential Revision: https://reviews.llvm.org/D25297
llvm-svn: 284824
When we have a loop with a known upper bound on the number of iterations, and
furthermore know that either the number of iterations will be either exactly
that upper bound or zero, then we can fully unroll up to that upper bound
keeping only the first loop test to check for the zero iteration case.
Most of the work here is in plumbing this 'max-or-zero' information from the
part of scalar evolution where it's detected through to loop unrolling. I've
also gone for the safe default of 'false' everywhere but howManyLessThans which
could probably be improved.
Differential Revision: https://reviews.llvm.org/D25682
llvm-svn: 284818
Summary:
The spill size was incorrectly set to 196 bits,
which isn't a multiple of 8. This problem was detected when
experimenting with asserts that the spill size should be a
multiple of the byte size.
New corrected value for the spill size is set to 192 bits.
Note that tablegen (RegisterInfoEmitter) will divide the
size set in the RegisterClass definition by 8. So this
change should not have any impact on the tablegen output
(trunc(192/8) == trunc(196/8) == 24 bytes).
Reviewers: t.p.northover
Subscribers: llvm-commits, aemerson, rengolin
Differential Revision: https://reviews.llvm.org/D25818
llvm-svn: 284814
On i386 alignof(double) = 8 is not the same as alignof(struct { double
}) = 4. This used to be not an issue because the old implementation
always measured alignment inside of structs. Wrap a dummy struct around
the test to avoid this issue.
llvm-svn: 284812
There's no agreement about this patch. I personally find the
PRE machinery of the current GVN hard enough to reason about
that I'm not sure I'll try to land this again, instead of working
on the rewrite).
llvm-svn: 284796
rL284780 fixed the PREL31 relocation and added a test for it. Being
the first such test for ARM relocations, it exposed incorrect endianness
assumptions (causing buildbot failures on big-endian hosts). Fix that by
using the same helpers used for the x86 case.
llvm-svn: 284789
This is to avoid inlining too many multiplication operands into a SCEV, which could
take exponential time in the worst case.
Reviewers: Sanjoy Das, Mehdi Amini, Michael Zolotukhin
Differential Revision: https://reviews.llvm.org/D25794
llvm-svn: 284784
Summary:
This allows us to mark when uses have been optimized.
This lets us avoid rewalking (IE when people call getClobberingAccess on everything), and also
enables us to later relax the requirement of use optimization during updates with less cost.
Reviewers: george.burgess.iv
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D25172
llvm-svn: 284771
load commands that use the MachO::twolevel_hints_command type
which includes only the LC_TWOLEVEL_HINTS load command.
This is not used in llvm libObject code or in llvm tool code. But
does appear in one of the binary test files. While this load command is
obsolete it is easier to add code for it in libObject than edit or change
the binary test case.
llvm-svn: 284769
