This separates the CPU specific scheduler model includes to occur after the instructions. Moves the instruction includes between the basic scheduler information and the CPU specific scheduler models.
llvm-svn: 320313
Currently tagged these as system instructions, once we have uses for them (ASAN?) and they are faster we will need to improve on this.
llvm-svn: 320173
Tagged as IMUL instructions for a reasonable approximation (ALU tends to be a lot faster) - POPCNT is currently tagged as FAdd which I think should be replaced with IMUL as well
llvm-svn: 320051
Atom's FABS/FCHS/FSQRT latencies taken from Agner.
Note: I just added FSIN and FCOS to the existing IIC_FSINCOS itinerary, which is actually a more costly instruction.
llvm-svn: 319175
Adding the scheduling information for the Browadwell (BDW) CPU target.
This patch adds the instruction scheduling information for the Broadwell (BDW) architecture target by adding the file X86SchedBroadwell.td located under the X86 Target.
We used the scheduling information retrieved from the Broadwell architects in order to create the file.
The scheduling information includes latency, number of micro-Ops and used ports by each BDW instruction.
The patch continues the scheduling replacement and insertion effort started with the SandyBridge (SNB) target in r310792, the Haswell (HSW) target in r311879, the SkylakeClient (SKL) target in rL313613 + rL315978 and the SkylakeServer (SKX) in rL315175.
Performance fluctuations may be expected due to code alignment effects.
Reviewers: zvi, RKSimon, craig.topper
Differential Revision: https://reviews.llvm.org/D39054
Change-Id: If6f799e5ff60e1091c8d43b05ea78c53581bae01
llvm-svn: 316492
Adding the scheduling information for the SkylakeServer (SKX) target.
This patch adds the instruction scheduling information for the SkylakeServer (SKX) architecture target by adding the file X86SchedSkylakeServer.td located under the X86 Target.
We used the scheduling information retrieved from the Skylake architects in order to create the file.
The scheduling information includes latency, number of micro-Ops and used ports by each SKL instruction.
The patch continues the scheduling replacement and insertion effort started with the SNB target in r310792, the HSW target in r311879 and the SkylakeClient (SKL) target in rL313613.
Please expect some performance fluctuations due to code alignment effects.
Reviewers: zvi, RKSimon, craig.topper, chandlerc, aymanmu
Differential Revision: https://reviews.llvm.org/D38443
Change-Id: I5c228fcc09e9e5a99b6116e62b356c4f9b971185
llvm-svn: 315175
This patch adds the instruction scheduling information for the SkylakeClient (SKL) architecture target by adding the file X86SchedSkylakeClient.td located under the X86 Target.
We used the scheduling information retrieved from the Skylake architects in order to create the file.
The scheduling information includes latency, number of micro-Ops and used ports by each SKL instruction.
The patch continues the scheduling replacement and insertion effort started with the SNB target in r307529 and r310792 and for HSW in r311879.
Please expect some performance fluctuations due to code alignment effects.
Reviewers: craig.topper, zvi, chandlerc, igorb, aymanmus, RKSimon, delena
Differential Revision: https://reviews.llvm.org/D37294
llvm-svn: 313613
Improves atom scheduler test coverage (to make it easier to upgrade them for PR32431).
Checked on Agner that these actually match the UNPACK schedules, but better to include a separate class
llvm-svn: 309701
Summary:
This patch adds the following
1. Adds a skeleton scheduler model for AMD Znver1.
2. Introduces the znver1 execution units and pipes.
3. Caters the instructions based on the generic scheduler classes.
4. Further additions to the scheduler model with instruction itineraries will be carried out incrementally based on
a. Instructions types
b. Registers used
5. Since itineraries are not added based on instructions, throughput information are bound to change when incremental changes are added.
6. Scheduler testcases are modified accordingly to suit the new model.
Patch by Ganesh Gopalasubramanian. With minor formatting tweaks from me.
Reviewers: craig.topper, RKSimon
Subscribers: javed.absar, shivaram, ddibyend, vprasad
Differential Revision: https://reviews.llvm.org/D35293
llvm-svn: 308411
This patch adds support for the the LightWeight Profiling (LWP) instructions which are available on all AMD Bulldozer class CPUs (bdver1 to bdver4).
Reapplied - this time without changing line endings of existing files.
Differential Revision: https://reviews.llvm.org/D32769
llvm-svn: 302041
This patch adds support for the the LightWeight Profiling (LWP) instructions which are available on all AMD Bulldozer class CPUs (bdver1 to bdver4).
Differential Revision: https://reviews.llvm.org/D32769
llvm-svn: 302028
This patch does the following.
1. Adds an Intrinsic int_x86_clzero which works with __builtin_ia32_clzero
2. Identifies clzero feature using cpuid info. (Function:8000_0008, Checks if EBX[0]=1)
3. Adds the clzero feature under znver1 architecture.
4. The custom inserter is added in Lowering.
5. A testcase is added to check the intrinsic.
6. The clzero instruction is added to assembler test.
Patch by Ganesh Gopalasubramanian with a couple formatting tweaks, a disassembler test, and using update_llc_test.py from me.
Differential revision: https://reviews.llvm.org/D29385
llvm-svn: 294558
Summary:
MONITORX/MWAITX instructions provide similar capability to the MONITOR/MWAIT
pair while adding a timer function, such that another termination of the MWAITX
instruction occurs when the timer expires. The presence of the MONITORX and
MWAITX instructions is indicated by CPUID 8000_0001, ECX, bit 29.
The MONITORX and MWAITX instructions are intercepted by the same bits that
intercept MONITOR and MWAIT. MONITORX instruction establishes a range to be
monitored. MWAITX instruction causes the processor to stop instruction execution
and enter an implementation-dependent optimized state until occurrence of a
class of events.
Opcode of MONITORX instruction is "0F 01 FA". Opcode of MWAITX instruction is
"0F 01 FB". These opcode information is used in adding tests for the
disassembler.
These instructions are enabled for AMD's bdver4 architecture.
Patch by Ganesh Gopalasubramanian!
Reviewers: echristo, craig.topper, RKSimon
Subscribers: RKSimon, joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D19795
llvm-svn: 269911
For compilations with no explicit cpu specified, this exhibits
nice gains on Silvermont, with neutral performance on big cores.
Differential Revision: http://reviews.llvm.org/D19138
llvm-svn: 267809
TableGen checks at compiletime that for scheduling models with
"CompleteModel = 1" one of the following holds:
- Is marked with the hasNoSchedulingInfo flag
- The instruction is a subclass of Sched
- There are InstRW definitions in the scheduling model
Typical steps necessary to complete a model:
- Ensure all pseudo instructions that are expanded before machine
scheduling (usually everything handled with EmitYYY() functions in
XXXTargetLowering).
- If a CPU does not support some instructions mark the corresponding
resource unsupported: "WriteRes<WriteXXX, []> { let Unsupported = 1; }".
- Add missing scheduling information.
Differential Revision: http://reviews.llvm.org/D17747
llvm-svn: 262384
The SSE rsqrt instruction (a fast reciprocal square root estimate) was
grouped in the same scheduling IIC_SSE_SQRT* class as the accurate (but very
slow) SSE sqrt instruction. For code which uses rsqrt (possibly with
newton-raphson iterations) this poor scheduling was affecting performances.
This patch splits off the rsqrt instruction from the sqrt instruction scheduling
classes and creates new IIC_SSE_RSQER* classes with latency values based on
Agner's table.
Differential Revision: http://reviews.llvm.org/D5370
Patch by Simon Pilgrim.
llvm-svn: 218517
This is a first pass at a scheduling model for Jaguar.
It's structured largely on the existing SandyBridge and SLM sched models.
Using this model, in addition to turning on the PostRA scheduler, results in
some perf wins on internal and 3rd party benchmarks. There's not much difference
in LLVM's test-suite benchmarking subset of tests.
Differential Revision: http://reviews.llvm.org/D5229
llvm-svn: 217457
Refactoring; no functional changes intended
Removed PostRAScheduler bits from subtargets (X86, ARM).
Added PostRAScheduler bit to MCSchedModel class.
This bit is set by a CPU's scheduling model (if it exists).
Removed enablePostRAScheduler() function from TargetSubtargetInfo and subclasses.
Fixed the existing enablePostMachineScheduler() method to use the MCSchedModel (was just returning false!).
Added methods to TargetSubtargetInfo to allow overrides for AntiDepBreakMode, CriticalPathRCs, and OptLevel for PostRAScheduling.
Added enablePostRAScheduler() function to PostRAScheduler class which queries the subtarget for the above values.
Preserved existing scheduler behavior for ARM, MIPS, PPC, and X86:
a. ARM overrides the CPU's postRA settings by enabling postRA for any non-Thumb or Thumb2 subtarget.
b. MIPS overrides the CPU's postRA settings by enabling postRA for everything.
c. PPC overrides the CPU's postRA settings by enabling postRA for everything.
d. X86 is the only target that actually has postRA specified via sched model info.
Differential Revision: http://reviews.llvm.org/D4217
llvm-svn: 213101
The patch defines new or refines existing generic scheduling classes to match
the behavior of the SSE instructions.
It also maps those scheduling classes on the related SSE instructions.
<rdar://problem/15607571>
llvm-svn: 202065
Implements Instruction scheduler latencies for Silvermont,
using latencies from the Intel Silvermont Optimization Guide.
Auto detects SLM.
Turns on post RA scheduler when generating code for SLM.
llvm-svn: 190717
Replace the ill-defined MinLatency and ILPWindow properties with
with straightforward buffer sizes:
MCSchedMode::MicroOpBufferSize
MCProcResourceDesc::BufferSize
These can be used to more precisely model instruction execution if desired.
Disabled some misched tests temporarily. They'll be reenabled in a few commits.
llvm-svn: 184032
All Intel CPUs since Yonah look a lot alike, at least at the granularity
of the scheduling models. We can add more accurate models for
processors that aren't Sandy Bridge if required. Haswell will probably
need its own.
The Atom processor and anything based on NetBurst is completely
different. So are the non-Intel chips.
llvm-svn: 178080
All the instructions tagged with IIC_DEFAULT had nothing in common, and
we already have a NoItineraries class to represent untagged
instructions.
llvm-svn: 177937
Since almost all X86 instructions can fold loads, use a multiclass to
define register/memory pairs of SchedWrites.
An X86FoldableSchedWrite represents the register version of an
instruction. It holds a reference to the SchedWrite to use when the
instruction folds a load.
This will be used inside multiclasses that define rr and rm instruction
versions together.
llvm-svn: 177210
The new InstrSchedModel is easier to use than the instruction
itineraries. It will be used to model instruction latency and throughput
in modern Intel microarchitectures like Sandy Bridge.
InstrSchedModel should be able to coexist with instruction itinerary
classes, but for cleanliness we should switch the Atom processor model
to the new InstrSchedModel as well.
llvm-svn: 177122
This was an experimental option, but needs to be defined
per-target. e.g. PPC A2 needs to aggressively hide latency.
I converted some in-order scheduling tests to A2. Hal is working on
more test cases.
llvm-svn: 171946
subtarget CPU descriptions and support new features of
MachineScheduler.
MachineModel has three categories of data:
1) Basic properties for coarse grained instruction cost model.
2) Scheduler Read/Write resources for simple per-opcode and operand cost model (TBD).
3) Instruction itineraties for detailed per-cycle reservation tables.
These will all live side-by-side. Any subtarget can use any
combination of them. Instruction itineraries will not change in the
near term. In the long run, I expect them to only be relevant for
in-order VLIW machines that have complex contraints and require a
precise scheduling/bundling model. Once itineraries are only actively
used by VLIW-ish targets, they could be replaced by something more
appropriate for those targets.
This tablegen backend rewrite sets things up for introducing
MachineModel type #2: per opcode/operand cost model.
llvm-svn: 159891
