.lower() the Name and compare only the lowecase. Removing 81 compares/lines of
code. This changes the accepted string to be mixed lower/upper case but it
should be ok.
Discussed with Jim Grosbach.
llvm-svn: 224547
- This also fixes a bug introduced in r223880 where values were not
correctly marked as Dead anymore.
- Cleanup computeDeadValues(): split up SubRange code variant, simplify
arguments.
llvm-svn: 224538
Fix bugs related to atomic microMIPS SC/LL instructions: While expanding atomic
operations the mips32r2 encoding was emitted instead of microMIPS.
Differential Revision: http://reviews.llvm.org/D6659
llvm-svn: 224524
Fix an off-by-one access introduced in 224502 for push.w and pop.w with single
register operands. Add test cases for both scenarios.
Thanks to Asiri Rathnayake for pointing out the failure!
llvm-svn: 224521
Added RegOp2MemOpTable4 to transform 4th operand from register to memory in merge-masked versions of instructions.
Added lowering tests.
llvm-svn: 224516
The ARM Architecture Reference Manual states the following:
LDM{,IA,DB}:
The SP cannot be in the list.
The PC can be in the list.
If the PC is in the list:
• the LR must not be in the list
• the instruction must be either outside any IT block, or the last
instruction in an IT block.
POP:
The PC can be in the list.
If the PC is in the list:
• the LR must not be in the list
• the instruction must be either outside any IT block, or the last
instruction in an IT block.
PUSH:
The SP and PC can be in the list in ARM instructions, but not in Thumb
instructions.
STM:{,IA,DB}:
The SP and PC can be in the list in ARM instructions, but not in Thumb
instructions.
llvm-svn: 224502
Near as I can tell prefixes are ignored on these instructions except for a comment in the Intel docs about 0xf3. Binutils disassembler seems to ignore prefixes on these instructions. Our disassembler still doesn't distinguish PS and "no prefix" well enough for this to make a functional change, but it helps with experiments I'm doing on a potential new disassembler table builder.
llvm-svn: 224496
of the abi we should be using. For targets that don't use the
option there's no change, otherwise this allows external users
to set the ABI via string and avoid some of the -backend-option
pain in clang.
Use this option to move the ABI for the ARM port from the
Subtarget to the TargetMachine and update the testcases
accordingly since it's no longer valid to set via -mattr.
llvm-svn: 224492
same. This will change the "bare metal" ABI from APCS to AAPCS.
The only difference between the front and back end code is that
the code for Triple::GNU was added for environment. That will migrate
to the front end shortly.
Tests updated with the ABI they were originally testing in the case
of bare metal (e.g. -mtriple armv7) or with a -gnu for arm-linux
triples.
llvm-svn: 224489
This reverts commit r224416, reapplying r224389. The buildbots hadn't
recovered after my revert, waiting until David reverted a couple of his
commits. It looks like it was just bad timing (where we were both
modifying code related to the same assertion). Trying again...
Here's the original text:
When a function gets replaced by `ModuleLinker`, drop superseded
subprograms. This ensures that the "first" subprogram pointing at a
function is the same one that `!dbg` references point at.
This is a stop-gap fix for PR21910. Notably, this fixes Release+Asserts
bootstraps that are currently asserting out in
`LexicalScopes::initialize()` due to the explicit instantiations in
`lib/IR/Dominators.cpp` eventually getting replaced by -argpromotion.
llvm-svn: 224487
Also corrected the name of the load command to not end in an ’S’ as well as corrected
the name of the MachO::linker_option_command struct and other places that had the
word option as plural which did not match the Mac OS X headers.
llvm-svn: 224485
Add API to DIBuilder to handle self-referencing `DICompositeType`s.
Self-references aren't expected in the debug info graph, and we take
advantage of that by only calling `resolveCycles()` on nodes that were
once forward declarations (otherwise, DIBuilder needs an expensive
tracking reference to every unresolved node it creates, which in cyclic
graphs is *all of them*).
However, clang seems to create self-referencing `DICompositeType`s. Add
API to manage this safely. The paired commit to clang will include the
regression test.
I'll make the `DICompositeType` API `private` in a follow-up to prevent
misuse (I've separated that to prevent build failures from missing the
clang commit).
llvm-svn: 224482
Start lazy-loading `LTOModule`s that own their contexts. These can only
really be used for parsing symbols, so its unnecessary to ever
materialize their functions.
I looked into using `IRObjectFile::create()` and optionally calling
`materializAllPermanently()` afterwards, but this turned out to be
awkward.
- The default target triple and data layout logic needs to happen
*before* the call to `IRObjectFile::IRObjectFile()`, but after
`Module` was created.
- I tried passing a lambda in to do the module initialization, but
this seemed to require threading the error message from
`TargetRegistry::lookupTarget()` through `std::error_code`.
- I also looked at setting `errMsg` directly from within the lambda,
but this didn't look any better.
(I guess there's a reason we weren't already using that function.)
llvm-svn: 224466
This fixes a problem where stripCopies() would switch to values in the
main liverange when it crossed a copy instruction. However when joining
subranges we need to stay in the respective subregister ranges.
llvm-svn: 224461
This was missed last time around, for the P8 Instruction Scheduling
changes (223257). This will hook the P8Model entry in so those
changes will actually be used.
llvm-svn: 224452
The ExecutionDepsFix previously mapped each register to 1 or zero
registers of the register class it was called with and therefore
simulating liveness for. This was problematic for cases involving wider
registers like Q0 on ARM where ExecutionDepsFix gets invoked for the Dxx
registers. In these cases the wide register would get mapped to the last
matching D register, while it should have been all matching D registers.
This commit changes the AliasMap to use a SmallVector to map registers
to potentially multiple destination regclass registers. This is required
to avoid regressions with subregister liveness tracking enabled.
llvm-svn: 224447
This patch removes the RNG from Module. Passes should instead create a new RNG for their use as needed.
Patch by Stephen Crane @rinon.
Differential revision: http://reviews.llvm.org/D4377
llvm-svn: 224444
Summary:
With isSingleValueType starting to treat vector types as single-value types,
code that uses this interface needs to be updated.
Test Plan:
vector-global.ll
nvcl-param-align.ll
Reviewers: jholewinski
Reviewed By: jholewinski
Subscribers: llvm-commits, meheff, eliben, jholewinski
Differential Revision: http://reviews.llvm.org/D6573
llvm-svn: 224440
This handles the case of a BUILD_VECTOR being constructed out of elements extracted from a vector twice the size of the result vector. Previously this was always scalarized. Now, we try to construct a shuffle node that feeds on extract_subvectors.
This fixes PR15872 and provides a partial fix for PR21711.
Differential Revision: http://reviews.llvm.org/D6678
llvm-svn: 224429
Summary:
When generating MIPS assembly, LLVM always overrides the default assembler options by emitting the '.set noreorder', '.set nomacro' and '.set noat' directives,
while GCC uses the default options if an assembly-level function contains inline assembly code.
This becomes a problem when the code generated by LLVM is interleaved with inline assembly which assumes GCC-like assembler options (from Linux, for example).
This patch fixes these conflicts by setting the appropriate assembler options at the beginning of an inline asm block and popping them at the end.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6637
llvm-svn: 224425
Some intrinsics, like s/uadd.with.overflow and umul.with.overflow, are already strength reduced.
This change adds other arithmetic intrinsics: s/usub.with.overflow, smul.with.overflow.
It completes the work on PR20194.
llvm-svn: 224417
Summary:
Currently, it supports generating, but not parsing, this expression.
Test added as well.
Test Plan: New test added, no regressions due to this.
Reviewers: hfinkel
Reviewed By: hfinkel
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6672
llvm-svn: 224415
We can always choose an value for undef which might cause %V to shift
out an important bit except for one case, when %V is zero.
However, shl behaves like an identity function when the right hand side
is zero.
llvm-svn: 224405
The type promotion helper does not support vector type, so when make
such it does not kick in in such cases.
Original commit message:
[CodeGenPrepare] Move sign/zero extensions near loads using type promotion.
This patch extends the optimization in CodeGenPrepare that moves a sign/zero
extension near a load when the target can combine them. The optimization may
promote any operations between the extension and the load to make that possible.
Although this optimization may be beneficial for all targets, in particular
AArch64, this is enabled for X86 only as I have not benchmarked it for other
targets yet.
** Context **
Most targets feature extended loads, i.e., loads that perform a zero or sign
extension for free. In that context it is interesting to expose such pattern in
CodeGenPrepare so that the instruction selection pass can form such loads.
Sometimes, this pattern is blocked because of instructions between the load and
the extension. When those instructions are promotable to the extended type, we
can expose this pattern.
** Motivating Example **
Let us consider an example:
define void @foo(i8* %addr1, i32* %addr2, i8 %a, i32 %b) {
%ld = load i8* %addr1
%zextld = zext i8 %ld to i32
%ld2 = load i32* %addr2
%add = add nsw i32 %ld2, %zextld
%sextadd = sext i32 %add to i64
%zexta = zext i8 %a to i32
%addza = add nsw i32 %zexta, %zextld
%sextaddza = sext i32 %addza to i64
%addb = add nsw i32 %b, %zextld
%sextaddb = sext i32 %addb to i64
call void @dummy(i64 %sextadd, i64 %sextaddza, i64 %sextaddb)
ret void
}
As it is, this IR generates the following assembly on x86_64:
[...]
movzbl (%rdi), %eax # zero-extended load
movl (%rsi), %es # plain load
addl %eax, %esi # 32-bit add
movslq %esi, %rdi # sign extend the result of add
movzbl %dl, %edx # zero extend the first argument
addl %eax, %edx # 32-bit add
movslq %edx, %rsi # sign extend the result of add
addl %eax, %ecx # 32-bit add
movslq %ecx, %rdx # sign extend the result of add
[...]
The throughput of this sequence is 7.45 cycles on Ivy Bridge according to IACA.
Now, by promoting the additions to form more extended loads we would generate:
[...]
movzbl (%rdi), %eax # zero-extended load
movslq (%rsi), %rdi # sign-extended load
addq %rax, %rdi # 64-bit add
movzbl %dl, %esi # zero extend the first argument
addq %rax, %rsi # 64-bit add
movslq %ecx, %rdx # sign extend the second argument
addq %rax, %rdx # 64-bit add
[...]
The throughput of this sequence is 6.15 cycles on Ivy Bridge according to IACA.
This kind of sequences happen a lot on code using 32-bit indexes on 64-bit
architectures.
Note: The throughput numbers are similar on Sandy Bridge and Haswell.
** Proposed Solution **
To avoid the penalty of all these sign/zero extensions, we merge them in the
loads at the beginning of the chain of computation by promoting all the chain of
computation on the extended type. The promotion is done if and only if we do not
introduce new extensions, i.e., if we do not degrade the code quality.
To achieve this, we extend the existing “move ext to load” optimization with the
promotion mechanism introduced to match larger patterns for addressing mode
(r200947).
The idea of this extension is to perform the following transformation:
ext(promotableInst1(...(promotableInstN(load))))
=>
promotedInst1(...(promotedInstN(ext(load))))
The promotion mechanism in that optimization is enabled by a new TargetLowering
switch, which is off by default. In other words, by default, the optimization
performs the “move ext to load” optimization as it was before this patch.
** Performance **
Configuration: x86_64: Ivy Bridge fixed at 2900MHz running OS X 10.10.
Tested Optimization Levels: O3/Os
Tests: llvm-testsuite + externals.
Results:
- No regression beside noise.
- Improvements:
CINT2006/473.astar: ~2%
Benchmarks/PAQ8p: ~2%
Misc/perlin: ~3%
The results are consistent for both O3 and Os.
<rdar://problem/18310086>
llvm-svn: 224402
