This reverts commit r280796, as it broke the AArch64 bots for no reason.
The tests were passing and we should try to keep them passing, so a proper
review should make that happen.
llvm-svn: 280802
Summary:
The o32 ABI doesn't not support the TImode helpers. For the time being,
disable just the shift libcalls as they break recursive builds on MIPS.
Reviewers: sdardis
Subscribers: llvm-commits, sdardis
Differential Revision: https://reviews.llvm.org/D24259
llvm-svn: 280798
In failure cases it's not guaranteed that the PHI we're inspecting is actually in the successor block! In this case we need to bail out early, and never query getIncomingValueForBlock() as that will cause an assert.
llvm-svn: 280794
I should have realised this the first time around, but if we're avoiding sinking stores where the operands come from allocas so they don't create selects, we also have to do the same for loads because SROA will be just as defective looking at loads of selected addresses as stores.
Fixes PR30188 (again).
llvm-svn: 280792
In the top-level CMakeLists.txt, we set CMAKE_BUILD_WITH_INSTALL_RPATH to ON,
and then for the unit tests we set it to <test>/../../lib. This works for tests
that live in unittest/<whatever>, but not for those that live in subdirectories
e.g. unittest/Transforms/IPO or unittest/ExecutionEngine/Orc. When building
with BUILD_SHARED_LIBRARIES, such tests don't manage to find their libraries.
Since the tests are run from the build directory, it makes sense to set their
RPATH for the build tree, rather than the install tree. This is the default in
CMake since 2.6, so all we have to do is set CMAKE_BUILD_WITH_INSTALL_RPATH to
OFF for the unit tests.
llvm-svn: 280791
PR30292 showed a case where our PHI checking wasn't correct. We were checking that all values were used by the same PHI before deciding to sink, but we weren't checking that the incoming values for that PHI were what we expected. As a result, we had to bail out after block splitting which caused us to never reach a steady state in SimplifyCFG.
Fixes PR30292.
llvm-svn: 280790
When folding an addi into a memory access that can take an immediate offset, we
were implicitly assuming that the existing offset was zero. This was incorrect.
If we're dealing with an addi with a plain constant, we can add it to the
existing offset (assuming that doesn't overflow the immediate, etc.), but if we
have anything else (i.e. something that will become a relocation expression),
we'll go back to requiring the existing immediate offset to be zero (because we
don't know what the requirements on that relocation expression might be - e.g.
maybe it is paired with some addis in some relevant way).
On the other hand, when dealing with a plain addi with a regular constant
immediate, the alignment restrictions (from the TOC base pointer, etc.) are
irrelevant.
I've added the test case from PR30280, which demonstrated the bug, but also
demonstrates a missed optimization opportunity (i.e. we don't need the memory
accesses at all).
Fixes PR30280.
llvm-svn: 280789
The previous commit (r280368 - https://reviews.llvm.org/D23313) does not cover AVX-512F, KNL set.
FNEG(x) operation is lowered to (bitcast (vpxor (bitcast x), (bitcast constfp(0x80000000))).
It happens because FP XOR is not supported for 512-bit data types on KNL and we use integer XOR instead.
I added pattern match for integer XOR.
Differential Revision: https://reviews.llvm.org/D24221
llvm-svn: 280785
This was originally submitted in r280549, and reverted in r280577
due to breaking one MSVC buildbot. The issue is that MSVC 2013
doesn't synthesize move constructors. So even though i was
writing std::move(A) it was copying it, leading to a bogus ArrayRef.
The solution here is to simply remove the std::vector<> from the
type, since it is unused and unnecessary. This way the ArrayRef
continues to point into the original memory backing the CVType.
llvm-svn: 280769
I might have called this "r246507, the sequel". It fixes the same issue, as the
issue has cropped up in a few more places. The underlying problem is that
isSetCCEquivalent can pick up select_cc nodes with a result type that is not
legal for a setcc node to have, and if we use that type to create new setcc
nodes, nothing fixes that (and so we've violated the contract that the
infrastructure has with the backend regarding setcc node types).
Fixes PR30276.
For convenience, here's the commit message from r246507, which explains the
problem is greater detail:
[DAGCombine] Fixup SETCC legality checking
SETCC is one of those special node types for which operation actions (legality,
etc.) is keyed off of an operand type, not the node's value type. This makes
sense because the value type of a legal SETCC node is determined by its
operands' value type (via the TLI function getSetCCResultType). When the
SDAGBuilder creates SETCC nodes, it either creates them with an MVT::i1 value
type, or directly with the value type provided by TLI.getSetCCResultType.
The first problem being fixed here is that DAGCombine had several places
querying TLI.isOperationLegal on SETCC, but providing the return of
getSetCCResultType, instead of the operand type directly. This does not mean
what the author thought, and "luckily", most in-tree targets have SETCC with
Custom lowering, instead of marking them Legal, so these checks return false
anyway.
The second problem being fixed here is that two of the DAGCombines could create
SETCC nodes with arbitrary (integer) value types; specifically, those that
would simplify:
(setcc a, b, op1) and|or (setcc a, b, op2) -> setcc a, b, op3
(which is possible for some combinations of (op1, op2))
If the operands of the and|or node are actual setcc nodes, then this is not an
issue (because the and|or must share the same type), but, the relevant code in
DAGCombiner::visitANDLike and DAGCombiner::visitORLike actually calls
DAGCombiner::isSetCCEquivalent on each operand, and that function will
recognise setcc-like select_cc nodes with other return types. And, thus, when
creating new SETCC nodes, we need to be careful to respect the value-type
constraint. This is even true before type legalization, because it is quite
possible for the SELECT_CC node to have a legal type that does not happen to
match the corresponding TLI.getSetCCResultType type.
To be explicit, there is nothing that later fixes the value types of SETCC
nodes (if the type is legal, but does not happen to match
TLI.getSetCCResultType). Creating SETCCs with an MVT::i1 value type seems to
work only because, either MVT::i1 is not legal, or it is what
TLI.getSetCCResultType returns if it is legal. Fixing that is a larger change,
however. For the time being, restrict the relevant transformations to produce
only SETCC nodes with a value type matching TLI.getSetCCResultType (or MVT::i1
prior to type legalization).
Fixes PR24636.
llvm-svn: 280767
Use the same color for counts and percentages. There doesn't seem to be
a reason for them to be different, and the summary looks more consistent
this way.
llvm-svn: 280765
This cleanup removes the need for the native support library to have its own target. That target was only needed because makefile builds were tripping over each other if two tablegen targets were building at the same time. This causes problems because the parallel make invocations through CMake can't communicate with each other. This is fixed by invoking make directly instead of through CMake which is how we handle this in External Project invocations.
The other part of the cleanup is to mark the custom commands as USES_TERMINAL. This is a bit of a hack, but we need to ensure that Ninja generators don't invoke multiple tablegen targets in the same build dir in parallel, because that too would be bad.
Marking as USES_TERMINAL does have some downside for Ninja because it results in decreased parallelism, but correct builds are worth the minor loss and LLVM_OPTIMZIED_TABLEGEN is such a huge win, it is worth it.
llvm-svn: 280748
- Implemented amdgpu-flat-work-group-size attribute
- Implemented amdgpu-num-active-waves-per-eu attribute
- Implemented amdgpu-num-sgpr attribute
- Implemented amdgpu-num-vgpr attribute
- Dynamic LDS constraints are in a separate patch
Patch by Tom Stellard and Konstantin Zhuravlyov
Differential Revision: https://reviews.llvm.org/D21562
llvm-svn: 280747
Summary:
I put this code here, because I want to re-use it in a few other places.
This supersedes some of the immediate folding code we have in SIFoldOperands.
I think the peephole optimizers is probably a better place for folding
immediates into copies, since it does some register coalescing in the same time.
This will also make it easier to transition SIFoldOperands into a smarter pass,
where it looks at all uses of instruction at once to determine the optimal way to
fold operands. Right now, the pass just considers one operand at a time.
Reviewers: arsenm
Subscribers: wdng, nhaehnle, arsenm, llvm-commits, kzhuravl
Differential Revision: https://reviews.llvm.org/D23402
llvm-svn: 280744
This patch provides easy navigation to find the zero count lines, especially useful when the source file is very large.
Differential Revision: https://reviews.llvm.org/D23277
llvm-svn: 280739
This adds a copy of the demangler in libcxxabi.
The code also has no dependencies on anything else in LLVM. To enforce
that I added it as another library. That way a BUILD_SHARED_LIBS will
fail if anyone adds an use of StringRef for example.
The no llvm dependency combined with the fact that this has to build
on linux, OS X and Windows required a few changes to the code. In
particular:
No constexpr.
No alignas
On OS X at least this library has only one global symbol:
__ZN4llvm16itanium_demangleEPKcPcPmPi
My current plan is:
Commit something like this
Change lld to use it
Change lldb to use it as the fallback
Add a few #ifdefs so that exactly the same file can be used in
libcxxabi to export abi::__cxa_demangle.
Once the fast demangler in lldb can handle any names this
implementation can be replaced with it and we will have the one true
demangler.
llvm-svn: 280732
This replaces the threading of `std::string &Error` through all of
these APIs with checked Error returns instead. There are very few
places here that actually emit any errors right now, but threading the
APIs through will allow us to replace a bunch of exit(1)'s that are
scattered through this code with proper error handling.
This is more or less NFC, but does move around where a couple of error
messages are printed out.
llvm-svn: 280720
If we are extracting a subvector that has just been inserted then we should just use the original inserted subvector.
This has come up in certain several x86 shuffle lowering cases where we are crossing 128-bit lanes.
Differential Revision: https://reviews.llvm.org/D24254
llvm-svn: 280715
Currently the pass updates branch weights in the IR if the function has
any PGO info (entry frequency is set). However we could still have
regions of the CFG that does not have branch weights collected (e.g. a
cold region). In this case we'd use static estimates. Since static
estimates for branches are determined independently, they are
inconsistent. Updating them can "randomly" inflate block frequencies.
I've run into this in a completely cold loop of h264ref from
SPEC. -Rpass-with-hotness showed the loop to be completely cold during
inlining (before JT) but completely hot during vectorization (after JT).
The new testcase demonstrate the problem. We check array elements
against 1, 2 and 3 in a loop. The check against 3 is the loop-exiting
check. The block names should be self-explanatory.
In this example, jump threading incorrectly updates the weight of the
loop-exiting branch to 0, drastically inflating the frequency of the
loop (in the range of billions).
There is no run-time profile info for edges inside the loop, so branch
probabilities are estimated. These are the resulting branch and block
frequencies for the loop body:
check_1 (16)
(8) / |
eq_1 | (8)
\ |
check_2 (16)
(8) / |
eq_2 | (8)
\ |
check_3 (16)
(1) / |
(loop exit) | (15)
|
(back edge)
First we thread eq_1 -> check_2 to check_3. Frequencies are updated to
remove the frequency of eq_1 from check_2 and then from the false edge
leaving check_2. Changed frequencies are highlighted with * *:
check_1 (16)
(8) / |
eq_1~ | (8)
/ |
/ check_2 (*8*)
/ (8) / |
\ eq_2 | (*0*)
\ \ |
` --- check_3 (16)
(1) / |
(loop exit) | (15)
|
(back edge)
Next we thread eq_1 -> check_3 and eq_2 -> check_3 to check_1 as new
back edges. Frequencies are updated to remove the frequency of eq_1 and
eq_3 from check_3 and then the false edge leaving check_3 (changed
frequencies are highlighted with * *):
check_1 (16)
(8) / |
eq_1~ | (8)
/ |
/ check_2 (*8*)
/ (8) / |
/-- eq_2~ | (*0*)
(back edge) |
check_3 (*0*)
(*0*) / |
(loop exit) | (*0*)
|
(back edge)
As a result, the loop exit edge ends up with 0 frequency which in turn makes
the loop header to have maximum frequency.
There are a few potential problems here:
1. The profile data seems odd. There is a single profile sample of the
loop being entered. On the other hand, there are no weights inside the
loop.
2. Based on static estimation we shouldn't set edges to "extreme"
values, i.e. extremely likely or unlikely.
3. We shouldn't create profile metadata that is calculated from static
estimation. I am not sure what policy is but it seems to make sense to
treat profile metadata as something that is known to originate from
profiling. Estimated probabilities should only be reflected in BPI/BFI.
Any one of these would probably fix the immediate problem. I went for 3
because I think it's a good policy to have and added a FIXME about 2.
Differential Revision: https://reviews.llvm.org/D24118
llvm-svn: 280713
This was erroneously checked-in for 64 bits while trying to find if there was a way to get 64 bit atomicity in Leon processors. There is not and this change should not have been checked-in. There is no unit test for this as the existing unit tests test for behaviour to 32 bits, which was the original intention of the code.
llvm-svn: 280710
LLVM PR/29052 highlighted that FastISel for MIPS attempted to lower
arguments assuming that it was using the paired 32bit registers to
perform operations for f64. This mode of operation is not supported
for MIPSR6.
This patch resolves the reported issue by adding additional checks
for unsupported floating point unit configuration.
Thanks to mike.k for reporting this issue!
Reviewers: seanbruno, vkalintiris
Differential Review: https://reviews.llvm.org/D23795
llvm-svn: 280706
Unlike PPC64, PPC32/SVRV4 does not have red zone. In the absence of it
there is no guarantee that this part of the stack will not be modified
by any interrupt. To avoid this, make sure to claim the stack frame first
before storing into it.
This fixes https://llvm.org/bugs/show_bug.cgi?id=26519.
Differential Revision: https://reviews.llvm.org/D24093
llvm-svn: 280705
Use ADT/BitmaskEnum for DINode::DIFlags for the following purposes:
Get rid of unsigned int for flags to avoid problems on platforms with sizeof(int) < 4
Flags are now strongly typed
Patch by: Victor Leschuk <vleschuk@gmail.com>
Differential Revision: https://reviews.llvm.org/D23766
llvm-svn: 280700
Summary:
In addition to not including the register operand of the current
instruction also don't include any aliasing registers. We can't consider
these as candidates because using them will clobber the corresponding
register operand of the current instruction.
This change doesn't include a test case and it would probably be difficult
to produce a stable one since the bug depends on the results of register
allocation.
Reviewers: MatzeB, qcolombet, hfinkel
Subscribers: hfinkel, llvm-commits
Differential Revision: https://reviews.llvm.org/D24130
llvm-svn: 280698
