When looking for the best successor from the outer loop for a block
belonging to an inner loop, the edge probability computation can be
improved so that edges in the inner loop are ignored. For example,
suppose we are building chains for the non-loop part of the following
code, and looking for B1's best successor. Assume the true body is very
hot, then B3 should be the best candidate. However, because of the
existence of the back edge from B1 to B0, the probability from B1 to B3
can be very small, preventing B3 to be its successor. In this patch, when
computing the probability of the edge from B1 to B3, the weight on the
back edge B1->B0 is ignored, so that B1->B3 will have 100% probability.
if (...)
do {
B0;
... // some branches
B1;
} while(...);
else
B2;
B3;
Differential revision: http://reviews.llvm.org/D10825
llvm-svn: 253414
Summary:
This change adds MathExtras helper functions for handling unsigned, saturating addition and multiplication. It also updates the instrumentation and sample profile merge implementations to use them.
No functional changes.
Reviewers: dnovillo, bogner, davidxl
Subscribers: davidxl, llvm-commits
Differential Revision: http://reviews.llvm.org/D14720
llvm-svn: 253412
While still allowing CodeGen/AsmPrinter in llvm to own them using a bump
ptr allocator. (might be nice to replace the pointers there with
something that at least automatically calls their dtors, if that's
necessary/useful, rather than having it done explicitly (I think a typed
BumpPtrAllocator already does this, or maybe a unique_ptr with a custom
deleter, etc))
llvm-svn: 253409
The logic for handling the pattern without a shift is identical
to the logic for handling the pattern with a shift if you set
the shift amount to zero for the former.
This should make it easier to see that we probably don't even need
optimizeIntToFloatBitCast().
If we call something like foldVecTruncToExtElt() from visitTrunc(),
we'll solve PR25543:
https://llvm.org/bugs/show_bug.cgi?id=25543
llvm-svn: 253403
Missed bit of feedback from D14720.
Show the same "Make sure that all profile
data to be merged is generated from the same binary." hint for hash mismatch
and value site count mismatch as we now do for counter mismatch when merging
incompatible instrumentation profile data.
llvm-svn: 253400
Verified that this was at least /an/ issue, if not the only one, by
initializing NumBuckets to 1 (previously it was uninitialized, so if
this change made a difference, which it did (causing a bunch of tests to
crash) it demonstrates use-of-uninitialized memory). Initializing then
removes the crashes.
Thanks Reid for the debugging assistance
llvm-svn: 253395
Summary:
This change tries to make the root cause of instrumented profile data merge failures clearer.
Previous:
$ llvm-profdata merge test_0.profraw test_1.profraw -o test_merged.profdata
test_1.profraw: foo: Function count mismatch
test_1.profraw: bar: Function count mismatch
test_1.profraw: baz: Function count mismatch
...
Changed:
$ llvm-profdata merge test_0.profraw test_1.profraw -o test_merged.profdata
test_1.profraw: foo: Function basic block count change detected (counter mismatch)
Make sure that all profile data to be merged is generated from the same binary.
test_1.profraw: bar: Function basic block count change detected (counter mismatch)
test_1.profraw: baz: Function basic block count change detected (counter mismatch)
...
Reviewers: dnovillo, davidxl, bogner
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14739
llvm-svn: 253384
Summary:
Now that there is a one-to-one mapping from MachineFunction to
WinEHFuncInfo, we don't need to use a DenseMap to select the right
WinEHFuncInfo for the current funclet.
The main challenge here is that X86WinEHStatePass is an IR pass that
doesn't have access to the MachineFunction. I gave it its own
WinEHFuncInfo object that it uses to calculate state numbers, which it
then throws away. As long as nobody creates or removes EH pads between
this pass and SDAG construction, we will get the same state numbers.
The other thing X86WinEHStatePass does is to mark the EH registration
node. Instead of communicating which alloca was the registration through
WinEHFuncInfo, I added the llvm.x86.seh.ehregnode intrinsic. This
intrinsic generates no code and simply marks the alloca in use.
Reviewers: JCTremoulet
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14668
llvm-svn: 253378
The instruction combiner previously removed types from filter clauses in Landing Pad instructions if the type had previously been seen in a catch clause. This is incorrect and prevents unexpected exception handlers from rethrowing the caught type.
Differential Revision: http://reviews.llvm.org/D14669
llvm-svn: 253370
When resolving R_PPC64_REL24, code used to check for an address delta
that fits in 24 bits, while the instructions that take this relocation
actually can process address deltas that fit into *26* bits (as those
instructions have a 24 bit field, but implicitly append two zero bits
at the end since all instruction addresses are a multiple of 4).
This means that code would signal overflow once a single object's text
section exceeds 8 MB, while we can actually support up to 32 MB.
Partially fixes PR25540.
llvm-svn: 253369
This patch removes the std::string& argument from a number of C++ LTO API calls
and instead makes them use the installed diagnostic handler. This would also
improve consistency of diagnostic handling infrastructure: if an LTO client used
lto_codegen_set_diagnostic_handler() to install a custom error handler, we do
not want some error messages to go through the custom error handler, and some
other error messages to go into sLastErrorString.
llvm-svn: 253367
While setting function attributes we check all instructions that may access memory. For a call instruction we check all arguments. The special check is required for pointers.
I added vector-of-pointers to the call arguments types that should be checked.
Differential Revision: http://reviews.llvm.org/D14693
llvm-svn: 253363
The underlying issues surrounding codegen for 32-bit vselects have been resolved. The pessimistic costs for 64-bit vselects remain due to the bad
scalarization that is still happening there.
I tested this on A57 in T32, A32 and A64 modes. I saw no regressions, and some improvements.
From my benchmarks, I saw these improvements in A57 (T32)
spec.cpu2000.ref.177_mesa 5.95%
lnt.SingleSource/Benchmarks/Shootout/strcat 12.93%
lnt.MultiSource/Benchmarks/MiBench/telecomm-CRC32/telecomm-CRC32 11.89%
I also measured A57 A32, A53 T32 and A9 T32 and found no performance regressions. I see much bigger wins in third-party benchmarks with this change
Differential Revision: http://reviews.llvm.org/D14743
llvm-svn: 253349
Summary:
This patch changes the behavior of path::system_temp_directory() on Windows to be closer to GetTempPath Windows API call. Enforces path separator to be the native one, makes path absolute, etc. GetTempPath is not used directly because of limitations/implementation bugs on Windows 7.
Windows specific unit tests are added. Most of them runs in separated process with modified environment variables.
This change fixes FileSystemTest.CreateDir unittest that had been failing when run from Unix-like shell on Windows (Unix-like path separator (/) used in env variables).
Reviewers: chapuni, rafael, aaron.ballman
Subscribers: rafael, llvm-commits
Differential Revision: http://reviews.llvm.org/D14231
llvm-svn: 253345
SELECT_CC has the nasty property of having operands with unrelated
types. So if you do something like:
f32 = select_cc f16, f16, f32, f32, cc
You'd only look for the action for <select_cc, f32>, but never f16.
If the types are all legal, but the op isn't (as for f16 on AArch64,
or for f128 on x86_64/AArch64?), then you get into trouble.
For f128, we have softenSetCCOperands to handle this case.
Similarly, for f16, we can directly promote the CC operands.
llvm-svn: 253344
Now that setExecutable() changed to do all the ground work to make
memory executable on the host, we can remove all (redundant) calls
to invalidate instruction cache here.
As an added bonus, this makes invalidateInstructionCache() dead
code, so it can be removed.
Differential Revision: http://reviews.llvm.org/D13631
llvm-svn: 253343
setExecutable() should do everything that's needed to make the memory
executable on host, i.e. unconditionally set permissions + invalidate
instruction cache. llvm-rtdyld will be updated in my next commit.
Discusseed with: Lang Hames (as part of D13631).
llvm-svn: 253341
Statepoint lowering currently expects that the target method of a
statepoint only defines a single value. This precludes using
statepoints with ABIs that return values in multiple registers
(e.g. the SysV AMD64 ABI). This change adds support for lowering
statepoints with mutli-def targets.
llvm-svn: 253339
Several places in AsmPrinter.cpp print comments describing MachineOperand
registers using MCRegisterInfo, which uses MCOperand-oriented names. This
doesn't work for targets that use virtual registers exclusively, as
WebAssembly does, since virtual registers are represented and printed
differently.
This patch preserves what seems to be the spirit of r229978, avoiding the
use of TM.getSubtargetImpl(), while still using MachineOperand-oriented
printing for MachineOperands.
Differential Revision: http://reviews.llvm.org/D14709
llvm-svn: 253338
Currently, if the assembler encounters an error after parsing (such as an
out-of-range fixup), it reports this as a fatal error, and so stops after the
first error. However, for most of these there is an obvious way to recover
after emitting the error, such as emitting the fixup with a value of zero. This
means that we can report on all of the errors in a file, not just the first
one. MCContext::reportError records the fact that an error was encountered, so
we won't actually emit an object file with the incorrect contents.
Differential Revision: http://reviews.llvm.org/D14717
llvm-svn: 253328
This adds reportError to MCContext, which can be used as an alternative to
reportFatalError when the assembler wants to try to continue processing the
rest of the file after the error is reported, so that all of the errors ina
file can be reported. It records the fact that an error was encountered, so we
can avoid emitting an object file if any errors occurred.
This patch doesn't add any uses of this function (a later patch will convert
most uses of reportFatalError to use it), but there is a small functional
change: we use the SourceManager to print the error message, even if we have a
null SMLoc. This means that we get a SourceManager-style message, with the file
and line information shown as <unknown>, rather than the "LLVM ERROR" style
used by report_fatal_error.
llvm-svn: 253327
