The assumption that the target address for the relocation will always be
sizeof(intptr_t) and will always contain an addend for the relocation
value is very wrong. Default to no addend for now.
rdar://12157052
llvm-svn: 163765
When comparing to the macho relocation type enum value, make sure we're only
comparing against the bits in the RelType that correspond.
llvm-svn: 163764
No new tests are added.
All tests in ExecutionEngine/MCJIT that have been failing pass after this patch
is applied (when "make check" is done on a mips board).
Patch by Petar Jovanovic.
llvm-svn: 162135
allocations of executable memory would not be padded
to account for the size of the allocation header.
This resulted in undersized allocations, meaning that
when the allocation was written to later the next
allocation's header would be corrupted.
llvm-svn: 161984
include/llvm/Analysis/DebugInfo.h to include/llvm/DebugInfo.h.
The reasoning is because the DebugInfo module is simply an interface to the
debug info MDNodes and has nothing to do with analysis.
llvm-svn: 159312
LLVM is now -Wunused-private-field clean except for
- lib/MC/MCDisassembler/Disassembler.h. Not sure why it keeps all those unaccessible fields.
- gtest.
llvm-svn: 158096
IntItem cleanup. IntItemBase, IntItemConstantIntImp and IntItem merged into IntItem. All arithmetic operators was propogated from APInt. Also added comparison operators <,>,<=,>=. Currently you will find set of macros that propogates operators from APInt to IntItem in the beginning of IntegerSubset. Note that THESE MACROS WILL REMOVED after all passes will case-ranges compatible. Also note that these macros much smaller pain that something like this:
if (V->getValue().ugt(AnotherV->getValue()) { ... }
These changes made IntItem full featured integer object. It allows to make IntegerSubset class generic (move out all ConstantInt references inside and add unit-tests) in next commits.
llvm-svn: 157810
Implemented IntItem - the wrapper around APInt. Why not to use APInt item directly right now?
1. It will very difficult to implement case ranges as series of small patches. We got several large and heavy patches. Each patch will about 90-120 kb. If you replace ConstantInt with APInt in SwitchInst you will need to changes at the same time all Readers,Writers and absolutely all passes that uses SwitchInst.
2. We can implement APInt pool inside and save memory space. E.g. we use several switches that works with 256 bit items (switch on signatures, or strings). We can avoid value duplicates in this case.
3. IntItem can be easyly easily replaced with APInt.
4. Currenly we can interpret IntItem both as ConstantInt and as APInt. It allows to provide SwitchInst methods that works with ConstantInt for non-updated passes.
Why I need it right now? Currently I need to update SimplifyCFG pass (EqualityComparisons). I need to work with APInts directly a lot, so peaces of code
ConstantInt *V = ...;
if (V->getValue().ugt(AnotherV->getValue()) {
...
}
will look awful. Much more better this way:
IntItem V = ConstantIntVal->getValue();
if (AnotherV < V) {
}
Of course any reviews are welcome.
P.S.: I'm also going to rename ConstantRangesSet to IntegersSubset, and CRSBuilder to IntegersSubsetMapping (allows to map individual subsets of integers to the BasicBlocks).
Since in future these classes will founded on APInt, it will possible to use them in more generic ways.
llvm-svn: 157576
It's more flexible for MCJIT tasks, in addition it's provides a invalidation instruction cache for code sections which will be used before JIT code will be executed.
llvm-svn: 156933
optional library support to the llvm-build tool:
- Add new command line parameter to llvm-build: “--enable-optional-libraries”
- Add handing of new llvm-build library type “OptionalLibrary”
- Update Cmake and automake build systems to pass correct flags to llvm-build
based on configuration
Patch by Dan Malea!
llvm-svn: 156319
- Improved parameter names for clarity
- Added comments
- emitCommonSymbols should return void because its return value is not being
used anywhere
- Attempt to reduce the usage of the RelocationValueRef type. Restricts it
for a single goal and may serve as a step for eventual removal.
llvm-svn: 155908
- There's no point having a different type for the local and global symbol
tables.
- Renamed SymbolTable to GlobalSymbolTable to clarify the intention
- Improved const correctness where relevant
llvm-svn: 155898
relocations are resolved. It's much more reasonable to do this decision when
relocations are just being added - we have all the information at that point.
Also a bit of renaming and extra comments to clarify extensions.
llvm-svn: 155819
- Add comments
- Change field names to be more reasonable
- Fix indentation and naming to conform to coding conventions
- Remove unnecessary includes / replace them by forward declatations
llvm-svn: 155815
the MCJIT execution engine.
The GDB JIT debugging integration support works by registering a loaded
object image with a pre-defined function that GDB will monitor if GDB
is attached. GDB integration support is implemented for ELF only at this
time. This integration requires GDB version 7.0 or newer.
Patch by Andy Kaylor!
llvm-svn: 154868
of zero-initialized sections, virtual sections and common symbols
and preventing the loading of sections which are not required for
execution such as debug information.
Patch by Andy Kaylor!
llvm-svn: 154610
1. The main works will made in the RuntimeDyLdImpl with uses the ObjectFile class. RuntimeDyLdMachO and RuntimeDyLdELF now only parses relocations and resolve it. This is allows to make improvements of the RuntimeDyLd more easily. In addition the support for COFF can be easily added.
2. Added ARM relocations to RuntimeDyLdELF.
3. Added support for stub functions for the ARM, allowing to do a long branch.
4. Added support for external functions that are not loaded from the object files, but can be loaded from external libraries. Now MCJIT can correctly execute the code containing the printf, putc, and etc.
5. The sections emitted instead functions, thanks Jim Grosbach. MemoryManager.startFunctionBody() and MemoryManager.endFunctionBody() have been removed.
6. MCJITMemoryManager.allocateDataSection() and MCJITMemoryManager. allocateCodeSection() used JMM->allocateSpace() instead of JMM->allocateCodeSection() and JMM->allocateDataSection(), because I got an error: "Cannot allocate an allocated block!" with object file contains more than one code or data sections.
llvm-svn: 153754
relocations. The algorithm is the same as
that for x86_64. Scattered relocations, a
feature present in i386 but not on x86_64,
are not yet supported.
llvm-svn: 153466
This is necessary if the client wants to be able to mutate TargetOptions (for example, fast FP math mode) after the initial creation of the ExecutionEngine.
llvm-svn: 153342
(and hopefully on Windows). The bots have been down most of the day
because of this, and it's not clear to me what all will be required to
fix it.
The commits started with r153205, then r153207, r153208, and r153221.
The first commit seems to be the real culprit, but I couldn't revert
a smaller number of patches.
When resubmitting, r153207 and r153208 should be folded into r153205,
they were simple build fixes.
llvm-svn: 153241
1. Declare a virtual function getPointerToNamedFunction() in JITMemoryManager
2. Move the implementation of getPointerToNamedFunction() form JIT/MCJIT to DefaultJITMemoryManager.
llvm-svn: 153205
relocations (i.e., pieces of data whose addresses
are referred to elsewhere in the binary image) and
update the references when the section containing
the relocations moves. The way this works is that
there is a map from section IDs to lists of
relocations.
Because the relocations are associated with the
section containing the data being referred to, they
are updated only when the target moves. However,
many data references are relative and also depend
on the location of the referrer.
To solve this problem, I introduced a new data
structure, Referrer, which simply contains the
section being referred to and the index of the
relocation in that section. These referrers are
associated with the source containing the
reference that needs to be updated, so now
regardless of which end of the relocation moves,
the relocation will now be updated correctly.
llvm-svn: 153147
Also refactor the existing OProfile profiling code to reuse the same interfaces with the VTune profiling code.
In addition, unit tests for the profiling interfaces were added.
This patch was prepared by Andrew Kaylor and Daniel Malea, and reviewed in the llvm-commits list by Jim Grosbach
llvm-svn: 152620
Renamed methods caseBegin, caseEnd and caseDefault with case_begin, case_end, and case_default.
Added some notes relative to case iterators.
llvm-svn: 152532
http://lists.cs.uiuc.edu/pipermail/llvm-commits/Week-of-Mon-20120130/136146.html
Implemented CaseIterator and it solves almost all described issues: we don't need to mix operand/case/successor indexing anymore. Base iterator class is implemented as a template since it may be initialized either from "const SwitchInst*" or from "SwitchInst*".
ConstCaseIt is just a read-only iterator.
CaseIt is read-write iterator; it allows to change case successor and case value.
Usage of iterator allows totally remove resolveXXXX methods. All indexing convertions done automatically inside the iterator's getters.
Main way of iterator usage looks like this:
SwitchInst *SI = ... // intialize it somehow
for (SwitchInst::CaseIt i = SI->caseBegin(), e = SI->caseEnd(); i != e; ++i) {
BasicBlock *BB = i.getCaseSuccessor();
ConstantInt *V = i.getCaseValue();
// Do something.
}
If you want to convert case number to TerminatorInst successor index, just use getSuccessorIndex iterator's method.
If you want initialize iterator from TerminatorInst successor index, use CaseIt::fromSuccessorIndex(...) method.
There are also related changes in llvm-clients: klee and clang.
llvm-svn: 152297
code that will be relocated into another memory space.
Now when relocations are resolved, the address of
the relocation in the host memory (where the JIT is)
is passed separately from the address that the
relocation will be at in the target memory (where
the code will run).
llvm-svn: 152264
In historical reason, Interpreter's external entries had prefix "lle_X_" as C linkage, even for well-known entries in EE/Interpreter.
Now, at least on ToT, they are resolved via FuncNames[] mapper.
We will not need their symbols are expected to be exported any more.
Clang r150128 has introduced the warning <"%0 has C-linkage specified, but returns user-defined type %1 which is incompatible with C">.
llvm-svn: 151312
- Use unsigned literals when the desired result is unsigned. This mostly allows unsigned/signed mismatch warnings to be less noisy even if they aren't on by default.
- Remove misplaced llvm_unreachable.
- Add static to a declaration of a function on MSVC x86 only.
- Change some instances of calling a static function through a variable to simply calling that function while removing the unused variable.
llvm-svn: 150364
to what's done for MachO and COFF. This allows advanced uses of the class to
be implemented outside the Object library. In particular, the DyldELFObject
subclass is now moved into its logical home - ExecutionEngine/RuntimeDyld.
This patch was reviewed by Michael Spencer.
llvm-svn: 150327
needed to emit a 64-bit gp-relative relocation entry. Make changes necessary
for emitting jump tables which have entries with directive .gpdword. This patch
does not implement the parts needed for direct object emission or JIT.
llvm-svn: 149668
The purpose of refactoring is to hide operand roles from SwitchInst user (programmer). If you want to play with operands directly, probably you will need lower level methods than SwitchInst ones (TerminatorInst or may be User). After this patch we can reorganize SwitchInst operands and successors as we want.
What was done:
1. Changed semantics of index inside the getCaseValue method:
getCaseValue(0) means "get first case", not a condition. Use getCondition() if you want to resolve the condition. I propose don't mix SwitchInst case indexing with low level indexing (TI successors indexing, User's operands indexing), since it may be dangerous.
2. By the same reason findCaseValue(ConstantInt*) returns actual number of case value. 0 means first case, not default. If there is no case with given value, ErrorIndex will returned.
3. Added getCaseSuccessor method. I propose to avoid usage of TerminatorInst::getSuccessor if you want to resolve case successor BB. Use getCaseSuccessor instead, since internal SwitchInst organization of operands/successors is hidden and may be changed in any moment.
4. Added resolveSuccessorIndex and resolveCaseIndex. The main purpose of these methods is to see how case successors are really mapped in TerminatorInst.
4.1 "resolveSuccessorIndex" was created if you need to level down from SwitchInst to TerminatorInst. It returns TerminatorInst's successor index for given case successor.
4.2 "resolveCaseIndex" converts low level successors index to case index that curresponds to the given successor.
Note: There are also related compatability fix patches for dragonegg, klee, llvm-gcc-4.0, llvm-gcc-4.2, safecode, clang.
llvm-svn: 149481
The MachO file stores section alignment as log2(alignment-in-bytes). The
allocation routines want the raw alignment-in-bytes value, so adjust
for that.
llvm-svn: 148604
Move to a by-section allocation and relocation scheme. This allows
better support for sections which do not contain externally visible
symbols.
Flesh out the relocation address vs. local storage address separation a
bit more as well. Remote process JITs use this to tell the relocation
resolution code where the code will live when it executes.
The startFunctionBody/endFunctionBody interfaces to the JIT and the
memory manager are deprecated. They'll stick around for as long as the
old JIT does, but the MCJIT doesn't use them anymore.
llvm-svn: 148258
subdirectories to traverse into.
- Originally I wanted to avoid this and just autoscan, but this has one key
flaw in that new subdirectories can not automatically trigger a rerun of the
llvm-build tool. This is particularly a pain when switching back and forth
between trees where one has added a subdirectory, as the dependencies will
tend to be wrong. This will also eliminates FIXME implicitly.
llvm-svn: 146436
The OptLevel is now redundant with the TargetMachine*.
And selectTarget() isn't really JIT-specific and could probably
get refactored into one of the lower level libraries.
llvm-svn: 146355
generator to it. For non-bundle instructions, these behave exactly the same
as the MC layer API.
For properties like mayLoad / mayStore, look into the bundle and if any of the
bundled instructions has the property it would return true.
For properties like isPredicable, only return true if *all* of the bundled
instructions have the property.
For properties like canFoldAsLoad, isCompare, conservatively return false for
bundles.
llvm-svn: 146026
change, now you need a TargetOptions object to create a TargetMachine. Clang
patch to follow.
One small functionality change in PTX. PTX had commented out the machine
verifier parts in their copy of printAndVerify. That now calls the version in
LLVMTargetMachine. Users of PTX who need verification disabled should rely on
not passing the command-line flag to enable it.
llvm-svn: 145714
It was getting ignored after r144788.
Also fix an accidental implicit cast from the OptLevel enum
to an optional bool argument. MSVC warned on this, but gcc
didn't.
llvm-svn: 145633
and code model. This eliminates the need to pass OptLevel flag all over the
place and makes it possible for any codegen pass to use this information.
llvm-svn: 144788
methods but also class methods for Objective-C.
Clang emits Objective-C method names with '\1' at the
beginning, and the JIT has pre-existing logic to try
prepending a '\1' when searching a module for an
instance method (that is, a method whose name begins
with '-'). I simply extended it to do the same thing
when it encountered a class method (a method whose
name begins with '+').
llvm-svn: 144451
specified in the same file that the library itself is created. This is
more idiomatic for CMake builds, and also allows us to correctly specify
dependencies that are missed due to bugs in the GenLibDeps perl script,
or change from compiler to compiler. On Linux, this returns CMake to
a place where it can relably rebuild several targets of LLVM.
I have tried not to change the dependencies from the ones in the current
auto-generated file. The only places I've really diverged are in places
where I was seeing link failures, and added a dependency. The goal of
this patch is not to start changing the dependencies, merely to move
them into the correct location, and an explicit form that we can control
and change when necessary.
This also removes a serialization point in the build because we don't
have to scan all the libraries before we begin building various tools.
We no longer have a step of the build that regenerates a file inside the
source tree. A few other associated cleanups fall out of this.
This isn't really finished yet though. After talking to dgregor he urged
switching to a single CMake macro to construct libraries with both
sources and dependencies in the arguments. Migrating from the two macros
to that style will be a follow-up patch.
Also, llvm-config is still generated with GenLibDeps.pl, which means it
still has slightly buggy dependencies. The internal CMake
'llvm-config-like' macro uses the correct explicitly specified
dependencies however. A future patch will switch llvm-config generation
(when using CMake) to be based on these deps as well.
This may well break Windows. I'm getting a machine set up now to dig
into any failures there. If anyone can chime in with problems they see
or ideas of how to solve them for Windows, much appreciated.
llvm-svn: 136433
- Introduce JITDefault code model. This tells targets to set different default
code model for JIT. This eliminates the ugly hack in TargetMachine where
code model is changed after construction.
llvm-svn: 135580
(including compilation, assembly). Move relocation model Reloc::Model from
TargetMachine to MCCodeGenInfo so it's accessible even without TargetMachine.
llvm-svn: 135468
patch brings numerous advantages to LLVM. One way to look at it
is through diffstat:
109 files changed, 3005 insertions(+), 5906 deletions(-)
Removing almost 3K lines of code is a good thing. Other advantages
include:
1. Value::getType() is a simple load that can be CSE'd, not a mutating
union-find operation.
2. Types a uniqued and never move once created, defining away PATypeHolder.
3. Structs can be "named" now, and their name is part of the identity that
uniques them. This means that the compiler doesn't merge them structurally
which makes the IR much less confusing.
4. Now that there is no way to get a cycle in a type graph without a named
struct type, "upreferences" go away.
5. Type refinement is completely gone, which should make LTO much MUCH faster
in some common cases with C++ code.
6. Types are now generally immutable, so we can use "Type *" instead
"const Type *" everywhere.
Downsides of this patch are that it removes some functions from the C API,
so people using those will have to upgrade to (not yet added) new API.
"LLVM 3.0" is the right time to do this.
There are still some cleanups pending after this, this patch is large enough
as-is.
llvm-svn: 134829
be the first encoded as the first feature. It then uses the CPU name to look up
features / scheduling itineray even though clients know full well the CPU name
being used to query these properties.
The fix is to just have the clients explictly pass the CPU name!
llvm-svn: 134127
In particular, into EngineBuilder. This should only impact
the private API between the EE and EB classes, not external
clients, since JITCtor and MCJITCtor are both protected members.
llvm-svn: 131317
actually takes rather than how much memory was allocated for it. This
is more accurate and should help the manager pack things more effectively.
llvm-svn: 131305
erroring out completely. Some modules produce sections that aren't referenced,
so it's friendlier to clients like LLDB to just skip them, at least for now.
llvm-svn: 131243
In particular, into EngineBuilder. This should only impact
the private API between the EE and EB classes, not external
clients, since JITCtor and MCJITCtor are both protected members.
llvm-svn: 131026
a bit more sinister as the memset doesn't do what the constructor does.
There seems to be a cleaner solution than a cast here though, instead we
can point the memset destination into the union its actually trying to
clear.
An alternative is to point to the Untyped member of this union. Review
appreciated, and if that is cleaner I'm happy to switch. All of these
should be functionally equivalent to the original code.
llvm-svn: 130395
Add handling for tracking the relocations on symbols and resolving them.
Keep track of the relocations even after they are resolved so that if
the RuntimeDyld client moves the object, it can update the address and any
relocations to that object will be updated.
For our trival object file load/run test harness (llvm-rtdyld), this enables
relocations between functions located in the same object module. It should
be trivially extendable to load multiple objects with mutual references.
As a simple example, the following now works (running on x86_64 Darwin 10.6):
$ cat t.c
int bar() {
return 65;
}
int main() {
return bar();
}
$ clang t.c -fno-asynchronous-unwind-tables -o t.o -c
$ otool -vt t.o
t.o:
(__TEXT,__text) section
_bar:
0000000000000000 pushq %rbp
0000000000000001 movq %rsp,%rbp
0000000000000004 movl $0x00000041,%eax
0000000000000009 popq %rbp
000000000000000a ret
000000000000000b nopl 0x00(%rax,%rax)
_main:
0000000000000010 pushq %rbp
0000000000000011 movq %rsp,%rbp
0000000000000014 subq $0x10,%rsp
0000000000000018 movl $0x00000000,0xfc(%rbp)
000000000000001f callq 0x00000024
0000000000000024 addq $0x10,%rsp
0000000000000028 popq %rbp
0000000000000029 ret
$ llvm-rtdyld t.o -debug-only=dyld ; echo $?
Function sym: '_bar' @ 0
Function sym: '_main' @ 16
Extracting function: _bar from [0, 15]
allocated to 0x100153000
Extracting function: _main from [16, 41]
allocated to 0x100154000
Relocation at '_main' + 16 from '_bar(Word1: 0x2d000000)
Resolving relocation at '_main' + 16 (0x100154010) from '_bar (0x100153000)(pcrel, type: 2, Size: 4).
loaded '_main' at: 0x100154000
65
$
llvm-svn: 129388
mean that it has to be ConstantArray of ConstantStruct. We might have
ConstantAggregateZero, at either level, so don't crash on that.
Also, semi-deprecate the sentinal value. The linker isn't aware of sentinals so
we end up with the two lists appended, each with their "sentinals" on them.
Different parts of LLVM treated sentinals differently, so make them all just
ignore the single entry and continue on with the rest of the list.
llvm-svn: 129307
Teach 32-bit section loading to use the Memory Manager interface, just like
the 64-bit loading does. Tidy up a few other things here and there.
llvm-svn: 129138
Start teaching the runtime Dyld interface to use the memory manager API
for allocating space. Rather than mapping directly into the MachO object,
we extract the payload for each object and copy it into a dedicated buffer
allocated via the memory manager. For now, just do Segment64, so this works
on x86_64, but not yet on ARM.
llvm-svn: 128973
The JITMemory manager references LLVM IR constructs directly, while the
runtime Dyld works at a lower level and can handle objects which may not
originate from LLVM IR. Introduce a new layer for the memory manager to
handle the interface between them. For the MCJIT, this layer will be almost
entirely simply a call-through w/ translation between the IR objects and
symbol names.
llvm-svn: 128851
The ExecutionEngine constructor already added the module, so there's no
need to call addModule() directly. Doing so causes a double-free of the
Module at program termination.
llvm-svn: 128171
Support argument passing simple, common, prototypes directly. More
complicated scenarios will require building up a stub function, which the
MC-JIT isn't set up to handle yet.
Add Intercept.cpp, which is just a copy from ExecutionEngine/JIT for now,
to handle looking looking up external symbol names. This probably more
properly belongs as part of RuntimeDyld. It'll migrate there as things
flesh out more fully.
llvm-svn: 128090
Lots of cleanup to make the interfaces prettier, use the JITMemoryManager,
handle multiple functions and modules, etc.. This gets far enough that
the MCJIT compiles and runs code, though.
llvm-svn: 128052
Move the dynamic linking functionality of the llvm-rtdyld program into an
ExecutionEngine support library. Update llvm-rtdyld to just load an object
file into memory, use the library to process it, then run the _main()
function, if one is found.
llvm-svn: 128031
Proof-of-concept code that code-gens a module to an in-memory MachO object.
This will be hooked up to a run-time dynamic linker library (see: llvm-rtdyld
for similarly conceptual work for that part) which will take the compiled
object and link it together with the rest of the system, providing back to the
JIT a table of available symbols which will be used to respond to the
getPointerTo*() queries.
llvm-svn: 127916
