This patch is the initial support for the General Dynamic Thread Local
Local Storage model to produce code sequence and relocations correct
to the ABI for the model when using PC relative memory operations.
Patch by: NeHuang
Reviewed By: stefanp
Differential Revision: https://reviews.llvm.org/D82315
This patch adds support for constrained scalar fp to int operations on
PowerPC. Besides, this fixes the FP exception bit of quad-precision
convert & truncate instructions.
Reviewed By: steven.zhang, uweigand
Differential Revision: https://reviews.llvm.org/D81537
Summary:
This is a follow up for D82481. For .lcomm directive, although it's
not necessary to have .rename emitted, it's still desirable to do
it so that we do not see internal 'Rename..' gets print out in
symbol table. And we could have consistent naming between TC entry
and .lcomm. And also have consistent naming between IR and final
object file.
Reviewed By: hubert.reinterpretcast
Differential Revision: https://reviews.llvm.org/D86075
This patch implements the vec_extractm function prototypes in altivec.h in
order to utilize the vector extract with mask instructions introduced in Power10.
Differential Revision: https://reviews.llvm.org/D82675
A unique module id, which is a part of sinit and sterm function names, is
necessary to be unique. However, `getUniqueModuleId` will fail if there is
no strong external symbol within a module. We turn to use Pid and timestamp
when this happens.
Differential Revision: https://reviews.llvm.org/D85527
Similarly as for pointers, even for integers a == b is usually false.
GCC also uses this heuristic.
Reviewed By: ebrevnov
Differential Revision: https://reviews.llvm.org/D85781
Similarly as for pointers, even for integers a == b is usually false.
GCC also uses this heuristic.
Reviewed By: ebrevnov
Differential Revision: https://reviews.llvm.org/D85781
Similarly as for pointers, even for integers a == b is usually false.
GCC also uses this heuristic.
Reviewed By: ebrevnov
Differential Revision: https://reviews.llvm.org/D85781
This patch implements the builtins for the vector shifts (shl, srl, sra), and
adds the appropriate test cases for these builtins. The builtins utilize the
vector shift instructions introduced within ISA 3.1.
Differential Revision: https://reviews.llvm.org/D83338
SUMMARY:
1. in the patch , remove setting storageclass in function .getXCOFFSection and construct function of class MCSectionXCOFF
there are
XCOFF::StorageMappingClass MappingClass;
XCOFF::SymbolType Type;
XCOFF::StorageClass StorageClass;
in the MCSectionXCOFF class,
these attribute only used in the XCOFFObjectWriter, (asm path do not need the StorageClass)
we need get the value of StorageClass, Type,MappingClass before we invoke the getXCOFFSection every time.
actually , we can get the StorageClass of the MCSectionXCOFF from it's delegated symbol.
2. we also change the oprand of branch instruction from symbol name to qualify symbol name.
for example change
bl .foo
extern .foo
to
bl .foo[PR]
extern .foo[PR]
3. and if there is reference indirect call a function bar.
we also add
extern .bar[PR]
Reviewers: Jason liu, Xiangling Liao
Differential Revision: https://reviews.llvm.org/D84765
Summary:
Use TE SMC instead of TC SMC in large code model mode,
so that large code model TOC entries could get placed after all
the small code model TOC entries, which reduces the chance of TOC overflow.
Reviewed By: Xiangling_L
Differential Revision: https://reviews.llvm.org/D85455
Summary:
AIX assembler does not generate correct relocation when .rename
appear between tc entry label and .tc directive.
So only emit .rename after .tc/.comm or other linkage is emitted.
Reviewed By: daltenty, hubert.reinterpretcast
Differential Revision: https://reviews.llvm.org/D85317
On the frontend side, this patch recovers AIX static init implementation to
use the linkage type and function names Clang chooses for sinit related function.
On the backend side, this patch sets correct linkage and function names on aliases
created for sinit/sterm functions.
Differential Revision: https://reviews.llvm.org/D84534
Add a hidden option to the compiler to control a the PC Relative GOT indirect
linker optimization.
If this option is set to false the compiler will no loger produce the
relocations required by the linker to perform the optimization.
Reviewed By: nemanjai, NeHuang, #powerpc
Differential Revision: https://reviews.llvm.org/D85377
This patch introduces two intrinsics: llvm.ppc.setflm and
llvm.ppc.readflm. They read from or write to FPSCR register
(floating-point status & control) which contains rounding mode and
exception status.
To ensure correctness of program, we need to prevent FP operations from
being moved across these intrinsics (mffs/mtfsf instruction), so here I
set them as scheduling boundaries. We can relax such restriction if
FPSCR is modeled well in the future.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D84914
Introduce a fatal error if any thread local storage code is compiled
using pc relative memory operations as well as a hidden override
option `-enable-ppc-pcrel-tls` so that this support can be incrementally
added if possible.
Reviewed By: #powerpc, nemanjai
Differential Revision: https://reviews.llvm.org/D85448
This patch implements the function prototypes vec_extractl and vec_extracth in altivec.h to utilize the vector extract double element instructions introduced in Power10.
Differential Revision: https://reviews.llvm.org/D84622
If a function is in a unique section, putting all jump tables in
.rodata will prevent functions that have a jump table to get
garbage collect by the linker.
Therefore, we need to put jump table into a unique section as well.
Reviewed By: Xiangling_L
Differential Revision: https://reviews.llvm.org/D84761
The swap removal pass looks to remove swaps when a loaded value is swapped, some
number of lane-insensitive operations are performed and then the value is
swapped again and stored.
However, in a situation where we load the value, swap it and then store it
without swapping again, the pass erroneously removes the single swap. The
reason is that both checks in the same equivalence class:
- load feeds a swap
- swap feeds a store
pass. However, there is no check that the two swaps are actually a single swap.
This patch just fixes that.
Differential revision: https://reviews.llvm.org/D84785
The custom lowering saves an instruction over the generic expansion, by
taking advantage of the fact that PowerPC shift instructions are well
defined in the shift-by-bitwidth case.
Differential Revision: https://reviews.llvm.org/D83948
formLCSSAForInstructions is used by SCEVExpander, which tracks all
inserted instructions including LCSSA phis using asserting value
handles. This means cleanup needs to happen in the caller.
Extend formLCSSAForInstructions to take an optional pointer to a
vector. If this argument is non-nullptr, instead of directly deleting
the phis, add them to the vector, so the caller can process them.
This should address various PPC buildbot failures, including
http://lab.llvm.org:8011/builders/clang-ppc64be-linux-lnt/builds/40567
SPE doesn't have a fsel instruction, so don't try to lower to it.
This fixes a "Cannot select: tN: f64 = PPCISD::FSEL tX, tY, tZ" error.
Reviewed By: #powerpc, lkail
Differential Revision: https://reviews.llvm.org/D77773
The patterns were incorrect copies from the FPU code, and are
unnecessary, since there's no extended load for SPE. Just let LLVM
itself do the work by marking it expand.
Reviewed By: #powerpc, lkail
Differential Revision: https://reviews.llvm.org/D78670
Scheduler will try to retrieve the offset and base addr to determine if two
loads/stores are disjoint memory access. PowerPC failed to handle this for
frame index which will bring extra memory dependency for loads/stores.
Reviewed By: jji
Differential Revision: https://reviews.llvm.org/D84308
Summary:
This patch implements -ffunction-sections on AIX.
This patch focuses on assembly generation.
Follow-on patch needs to handle:
1. -ffunction-sections implication for jump table.
2. Object file generation path and associated testing.
Differential Revision: https://reviews.llvm.org/D83875
Summary:
In the phi-node-elimination pass, we set the killed flag incorrectly.
When we eliminate the PHI node, we replace the PHI with a copy for the
incoming value.
Before this patch, we will set incoming value as killed(PHICopy). And
we will remove the killed flag from last using incoming value(OldKill).
This is correct, only if the new PHICopy is after the OldKill.
Reviewed By: bjope
Differential Revision: https://reviews.llvm.org/D80886
Summary:
Some instructions have set the wrong [RM] flag, this patch is to fix it.
Instructions x(v|s)r(d|s)pi[zmp]? and fri[npzm] use fixed rounding
directions without referencing current rounding mode.
Also, the SETRNDi, SETRND, BCLRn, MTFSFI, MTFSB0, MTFSB1, MTFSFb,
MTFSFI, MTFSFI_rec, MTFSF, MTFSF_rec should also fix the RM flag.
Reviewed By: jsji
Differential Revision: https://reviews.llvm.org/D81360
Adds frontend and backend options to enable and disable the
PowerPC paired vector memory operations added in ISA 3.1.
Instructions using these options will be added in subsequent patches.
Differential Revision: https://reviews.llvm.org/D83722
Summary:
PPC only supports the instruction selection for v16i8, v8i16, v4i32,
v2i64, v4f32 and v2f64 for ISD::SETCC, don't support the v1i128, so
v1i128 for ISD::SETCC will crash.
This patch is to set v1i128 to expand to avoid crash.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D84238
Summary:
When doing MachineVerifier for LiveVariables, the MachineVerifier pass
will calculate the LiveVariables, and compares the result with the
result livevars pass gave. If they are different, verifyLiveVariables()
will give error.
But when we calculate the LiveVariables in MachineVerifier, we don't
consider the PHI node, while livevars considers.
This patch is to fix above bug.
Reviewed By: bjope
Differential Revision: https://reviews.llvm.org/D80274
For now, just return and do nothing when we see llvm.used and
llvm.compiler.used global array.
Hopefully, we could come up with a good solution later to prevent
linker from eliminating symbols in llvm.used array.
Reviewed By: DiggerLin, daltenty
Differential Revision: https://reviews.llvm.org/D84363
