For LLVM on *nix systems, the signal handlers are not run on signals
such as SIGINT due to CTRL-C. See sys::CleanupOnSignal. This makes
sense, as such signals are not really crashes. Prior to this change,
this wasn't the case on Windows, however. This patch changes the Windows
behaviour to be consistent with Linux, and adds testing that verifies
this.
The test uses llvm-symbolizer, but any tool with an interactive mode
would do the job.
Fixes https://bugs.llvm.org/show_bug.cgi?id=45754.
Reviewed by: MaskRay, rnk, aganea
Differential Revision: https://reviews.llvm.org/D79847
Recommitting part of "[CostModel] Unify Intrinsic Costs."
de71def3f59dc9f12f67141b5040d8e15c84d08a
Move the switch statement from TTImpl::getIntrinsicCost to
TTI::getIntrinsicInstrCost. This enables BasicTTI to understand
more 'free' intrinsics instead of defaulting to a cost of 1.
Differential Revision: https://reviews.llvm.org/D80012
This reverts commit de71def3f59dc9f12f67141b5040d8e15c84d08a.
This is causing some very large changes, so I'm first going to break
this patch down and re-commit in parts.
In case the then-path of an if-region is empty, then merging with the
else-path should be handled with the inverse of the condition (leading
to that path).
Fix PR37662
Differential Revision: https://reviews.llvm.org/D78881
Summary:
Currently, `rewriteLoopExitValues()`'s logic is roughly as following:
> Loop over each incoming value in each PHI node.
> Query whether the SCEV for that incoming value is high-cost.
> Expand the SCEV.
> Perform sanity check (`isValidRewrite()`, D51582)
> Record the info
> Afterwards, see if we can drop the loop given replacements.
> Maybe perform replacements.
The problem is that we interleave SCEV cost checking and expansion.
This is A Problem, because `isHighCostExpansion()` takes special care
to not bill for the expansions that were already expanded, and we can reuse.
While it makes sense in general - if we know that we will expand some SCEV,
all the other SCEV's costs should account for that, which might cause
some of them to become non-high-cost too, and cause chain reaction.
But that isn't what we are doing here. We expand *all* SCEV's, unconditionally.
So every next SCEV's cost will be affected by the already-performed expansions
for previous SCEV's. Even if we are not planning on keeping
some of the expansions we performed.
Worse yet, this current "bonus" depends on the exact PHI node
incoming value processing order. This is completely wrong.
As an example of an issue, see @dmajor's `pr45835.ll` - if we happen to have
a PHI node with two(!) identical high-cost incoming values for the same basic blocks,
we would decide first time around that it is high-cost, expand it,
and immediately decide that it is not high-cost because we have an expansion
that we could reuse (because we expanded it right before, temporarily),
and replace the second incoming value but not the first one;
thus resulting in a broken PHI.
What we instead should do for now, is not perform any expansions
until after we've queried all the costs.
Later, in particular after `isValidRewrite()` is an assertion (D51582)
we could improve upon that, but in a more coherent fashion.
See [[ https://bugs.llvm.org/show_bug.cgi?id=45835 | PR45835 ]]
Reviewers: dmajor, reames, mkazantsev, fhahn, efriedma
Reviewed By: dmajor, mkazantsev
Subscribers: smeenai, nikic, hiraditya, javed.absar, llvm-commits, dmajor
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79787
This is split off from D80316, slightly tightening the definition of overloaded
hardwareloop intrinsic llvm.loop.decrement.reg specifying that both operands
its result have the same type.
We do not have any special handling for constant FP deopt arguments.
They are just spilled to stack or generated in register by MOVS
instruction. This is inefficient and, when we have too many such
constant arguments, may result in register allocation failure.
Instead, we can bitcast such constant FP operands to appropriately
sized integer and record as constant into statepoint and later, into
StackMap.
Reviewed By: skatkov
Differential Revision: https://reviews.llvm.org/D80318
I have refactored the code so that we no longer need the
ScalableVecArgument descriptor - the scalable property of vectors is
now encoded using the ElementCount class in IITDescriptor. This means
that when matching intrinsics we know precisely how to match the
arguments and return values.
Differential Revision: https://reviews.llvm.org/D80107
With the two getIntrinsicInstrCosts folded into one, now fold in the
scalar/code-size orientated getIntrinsicCost. This involved sinking
cost of the TTIImpl into the base implementation, as it performs no
target checks. The opcodes remaining were memcpy, cttz and ctlz which
now have special handling in the BasicTTI implementation.
getInstructionThroughput can now directly return the result of
getUserCost.
This had required a change in the AMDGPU backend for fabs and its
always 'free'. I've also changed the X86 backend to return '1' for
any intrinsic when the CostKind isn't RecipThroughput.
Though this intended to be a non-functional change, there are many
paths being combined here so I would be very surprised if this didn't
have an effect.
Differential Revision: https://reviews.llvm.org/D80012
This has not been implemented by any backends which appear to cover
the functionality through getCastInstrCost. Sink what there is in the
default implementation into BasicTTI.
Differential Revision: https://reviews.llvm.org/D78922
The function does not need an MCStreamer per se; it was used only to get
access to the MCContext.
Differential Revision: https://reviews.llvm.org/D80205
Hide the method that allows setting probability for particular edge
and introduce a public method that sets probabilities for all
outgoing edges at once.
Setting individual edge probability is error prone. More over it is
difficult to check that the total probability is 1.0 because there is
no easy way to know when the user finished setting all
the probabilities.
Related bug is fixed in BranchProbabilityInfo::calcMetadataWeights().
Changing unreachable branch probabilities to raw(1) and distributing
the rest (oldProbability - raw(1)) over the reachable branches could
introduce total probability inaccuracy bigger than 1/numOfBranches.
Reviewers: yamauchi, ebrevnov
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79396
Will make it easier to pass the pointer info and alignment
correctly to the loads/stores.
While there also make the i32 stores independent and use a token
factor to join before the load.
Summary:
If an induction variable is frozen and used, SCEV yields imprecise result
because it doesn't say anything about frozen variables.
Due to this reason, performance degradation happened after
https://reviews.llvm.org/D76483 is merged, causing
SCEV yield imprecise result and preventing LSR to optimize a loop.
The suggested solution here is to add a pass which canonicalizes frozen variables
inside a loop. To be specific, it pushes freezes out of the loop by freezing
the initial value and step values instead & dropping nsw/nuw flags from instructions used by freeze.
This solution was also mentioned at https://reviews.llvm.org/D70623 .
Reviewers: spatel, efriedma, lebedev.ri, fhahn, jdoerfert
Reviewed By: fhahn
Subscribers: nikic, mgorny, hiraditya, javed.absar, llvm-commits, sanwou01, nlopes
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77523
The offsets were wrong. The result is now the same as what the compiler
would generate for a function that spills lr normally.
Differential Revision: https://reviews.llvm.org/D80238
If we don't know anything about the alignment of a pointer, Align(1) is
still correct: all pointers are at least 1-byte aligned.
Included in this patch is a bugfix for an issue discovered during this
cleanup: pointers with "dereferenceable" attributes/metadata were
assumed to be aligned according to the type of the pointer. This
wasn't intentional, as far as I can tell, so Loads.cpp was fixed to
stop making this assumption. Frontends may need to be updated. I
updated clang's handling of C++ references, and added a release note for
this.
Differential Revision: https://reviews.llvm.org/D80072
With the new SVE stack layout, we now need to provide a Darwin variant
for all the calling conventions based on the main AAPCS CSR save order.
This also changes APCS_SwiftError to have a Darwin and a non-Darwin
version, assuming it could be used on other platforms these days, and
restricts the AArch64_CXX_TLS calling convention to Darwin.
Differential Revision: https://reviews.llvm.org/D73805
Even though series of cmd/cndmask can produce quite a lot of
code that is still better than a loop. In case of doubles we
would even produce two loops.
Differential Revision: https://reviews.llvm.org/D80032
Previously this code just used a default constructed
MachinePointerInfo. But we know the accesses are to a fixed stack
object or at least somewhere on the stack.
While there fix the alignment passed to the full vector load/stores.
I don't think this function is currently exercised in tree so I
don't know how to test it. I just noticed it when I removed
non-constant index support in this function.
Differential Revision: https://reviews.llvm.org/D80058
lit runs a gtest executable multiple times. First it runs it to
discover tests, then later it runs the executable again for each test.
However, if the discovery fails (perhaps because of a broken
executable), then no tests were previously run and no failures were
reported. This patch creates a dummy test if discovery fails, which
will later fail when test are run and be reported as a failure.
Differential Revision: https://reviews.llvm.org/D80096
Demangling Itanium symbols either consumes the whole input or fails,
but Microsoft symbols can be successfully demangled with just some
of the input.
Add an outparam that enables clients to know how much of the input was
consumed, and use this flag to give llvm-undname an opt-in warning
on partially consumed symbols.
Differential Revision: https://reviews.llvm.org/D80173
See https://reviews.llvm.org/D74651 for the preallocated IR constructs
and LangRef changes.
In X86TargetLowering::LowerCall(), if a call is preallocated, record
each argument's offset from the stack pointer and the total stack
adjustment. Associate the call Value with an integer index. Store the
info in X86MachineFunctionInfo with the integer index as the key.
This adds two new target independent ISDOpcodes and two new target
dependent Opcodes corresponding to @llvm.call.preallocated.{setup,arg}.
The setup ISelDAG node takes in a chain and outputs a chain and a
SrcValue of the preallocated call Value. It is lowered to a target
dependent node with the SrcValue replaced with the integer index key by
looking in X86MachineFunctionInfo. In
X86TargetLowering::EmitInstrWithCustomInserter() this is lowered to an
%esp adjustment, the exact amount determined by looking in
X86MachineFunctionInfo with the integer index key.
The arg ISelDAG node takes in a chain, a SrcValue of the preallocated
call Value, and the arg index int constant. It produces a chain and the
pointer fo the arg. It is lowered to a target dependent node with the
SrcValue replaced with the integer index key by looking in
X86MachineFunctionInfo. In
X86TargetLowering::EmitInstrWithCustomInserter() this is lowered to a
lea of the stack pointer plus an offset determined by looking in
X86MachineFunctionInfo with the integer index key.
Force any function containing a preallocated call to use the frame
pointer.
Does not yet handle a setup without a call, or a conditional call.
Does not yet handle musttail. That requires a LangRef change first.
Tried to look at all references to inalloca and see if they apply to
preallocated. I've made preallocated versions of tests testing inalloca
whenever possible and when they make sense (e.g. not alloca related,
inalloca edge cases).
Aside from the tests added here, I checked that this codegen produces
correct code for something like
```
struct A {
A();
A(A&&);
~A();
};
void bar() {
foo(foo(foo(foo(foo(A(), 4), 5), 6), 7), 8);
}
```
by replacing the inalloca version of the .ll file with the appropriate
preallocated code. Running the executable produces the same results as
using the current inalloca implementation.
Reverted due to unexpectedly passing tests, added REQUIRES: asserts for reland.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77689
Summary:
Rename 'i' to 'I'.
Factor out the optional field handling to getOptionalVal().
Split out of D79951.
Reviewers: davidxl
Subscribers: eraman, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80230
See https://reviews.llvm.org/D74651 for the preallocated IR constructs
and LangRef changes.
In X86TargetLowering::LowerCall(), if a call is preallocated, record
each argument's offset from the stack pointer and the total stack
adjustment. Associate the call Value with an integer index. Store the
info in X86MachineFunctionInfo with the integer index as the key.
This adds two new target independent ISDOpcodes and two new target
dependent Opcodes corresponding to @llvm.call.preallocated.{setup,arg}.
The setup ISelDAG node takes in a chain and outputs a chain and a
SrcValue of the preallocated call Value. It is lowered to a target
dependent node with the SrcValue replaced with the integer index key by
looking in X86MachineFunctionInfo. In
X86TargetLowering::EmitInstrWithCustomInserter() this is lowered to an
%esp adjustment, the exact amount determined by looking in
X86MachineFunctionInfo with the integer index key.
The arg ISelDAG node takes in a chain, a SrcValue of the preallocated
call Value, and the arg index int constant. It produces a chain and the
pointer fo the arg. It is lowered to a target dependent node with the
SrcValue replaced with the integer index key by looking in
X86MachineFunctionInfo. In
X86TargetLowering::EmitInstrWithCustomInserter() this is lowered to a
lea of the stack pointer plus an offset determined by looking in
X86MachineFunctionInfo with the integer index key.
Force any function containing a preallocated call to use the frame
pointer.
Does not yet handle a setup without a call, or a conditional call.
Does not yet handle musttail. That requires a LangRef change first.
Tried to look at all references to inalloca and see if they apply to
preallocated. I've made preallocated versions of tests testing inalloca
whenever possible and when they make sense (e.g. not alloca related,
inalloca edge cases).
Aside from the tests added here, I checked that this codegen produces
correct code for something like
```
struct A {
A();
A(A&&);
~A();
};
void bar() {
foo(foo(foo(foo(foo(A(), 4), 5), 6), 7), 8);
}
```
by replacing the inalloca version of the .ll file with the appropriate
preallocated code. Running the executable produces the same results as
using the current inalloca implementation.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77689
