This reapplies commit r272385 with a fix. The build was failing when compiled
with gcc, but not with clang. With the fix, we now get the data layout from the
current TTI implementation, which will hopefully solve the issue.
llvm-svn: 272395
This patch refines the default cost for interleaved load groups having gaps. If
a load group has gaps, the legalized instructions corresponding to the unused
elements will be dead. Thus, we don't need to account for them in the cost
model. Instead, we only need to account for the fraction of legalized loads
that will actually be used.
Differential Revision: http://reviews.llvm.org/D20873
llvm-svn: 272385
This patch renames the option enabling the store-to-load forwarding conflict
detection optimization. This change was requested in the review of D20241.
llvm-svn: 269668
The selection of the vectorization factor currently doesn't consider
interleaved accesses. The vectorization factor is based on the maximum safe
dependence distance computed by LAA. However, for loops with interleaved
groups, we should instead base the vectorization factor on the maximum safe
dependence distance divided by the maximum interleave factor of all the
interleaved groups. Interleaved accesses not in a group will be scalarized.
Differential Revision: http://reviews.llvm.org/D20241
llvm-svn: 269659
When deciding if a vector calculation can be done in a smaller bitwidth, use sign bit information from ValueTracking to add more information and allow more truncations.
llvm-svn: 268921
This patch ensures that when we detect first-order recurrences, we reject a phi
node if its previous value is also a phi node. During vectorization the initial
and previous values of the recurrence are shuffled together to create the value
for the current iteration. However, phi nodes are not widened like other
instructions. This fixes PR27246.
Differential Revision: http://reviews.llvm.org/D18971
llvm-svn: 265983
This re-commits r265535 which was reverted in r265541 because it
broke the windows bots. The problem was that we had a PointerIntPair
which took a pointer to a struct allocated with new. The problem
was that new doesn't provide sufficient alignment guarantees.
This pattern was already present before r265535 and it just happened
to work. To fix this, we now separate the PointerToIntPair from the
ExitNotTakenInfo struct into a pointer and a bool.
Original commit message:
Summary:
When the backedge taken codition is computed from an icmp, SCEV can
deduce the backedge taken count only if one of the sides of the icmp
is an AddRecExpr. However, due to sign/zero extensions, we sometimes
end up with something that is not an AddRecExpr.
However, we can use SCEV predicates to produce a 'guarded' expression.
This change adds a method to SCEV to get this expression, and the
SCEV predicate associated with it.
In HowManyGreaterThans and HowManyLessThans we will now add a SCEV
predicate associated with the guarded backedge taken count when the
analyzed SCEV expression is not an AddRecExpr. Note that we only do
this as an alternative to returning a 'CouldNotCompute'.
We use new feature in Loop Access Analysis and LoopVectorize to analyze
and transform more loops.
Reviewers: anemet, mzolotukhin, hfinkel, sanjoy
Subscribers: flyingforyou, mcrosier, atrick, mssimpso, sanjoy, mzolotukhin, llvm-commits
Differential Revision: http://reviews.llvm.org/D17201
llvm-svn: 265786
Summary:
When the backedge taken codition is computed from an icmp, SCEV can
deduce the backedge taken count only if one of the sides of the icmp
is an AddRecExpr. However, due to sign/zero extensions, we sometimes
end up with something that is not an AddRecExpr.
However, we can use SCEV predicates to produce a 'guarded' expression.
This change adds a method to SCEV to get this expression, and the
SCEV predicate associated with it.
In HowManyGreaterThans and HowManyLessThans we will now add a SCEV
predicate associated with the guarded backedge taken count when the
analyzed SCEV expression is not an AddRecExpr. Note that we only do
this as an alternative to returning a 'CouldNotCompute'.
We use new feature in Loop Access Analysis and LoopVectorize to analyze
and transform more loops.
Reviewers: anemet, mzolotukhin, hfinkel, sanjoy
Subscribers: flyingforyou, mcrosier, atrick, mssimpso, sanjoy, mzolotukhin, llvm-commits
Differential Revision: http://reviews.llvm.org/D17201
llvm-svn: 265535
We already try not to truncate PHIs in computeMinimalBitwidths. LoopVectorize can't handle it and we really don't need to, because both induction and reduction PHIs are truncated by other means.
However, we weren't bailing out in all the places we should have, and we ended up by returning a PHI to be truncated, which has caused PR27018.
This fixes PR17018.
llvm-svn: 264852
The vectorization of first-order recurrences (r261346) caused PR26734. When
detecting these recurrences, we need to ensure that the previous value is
actually defined inside the loop. This patch includes the fix and test case.
llvm-svn: 262624
This patch enables the vectorization of first-order recurrences. A first-order
recurrence is a non-reduction recurrence relation in which the value of the
recurrence in the current loop iteration equals a value defined in the previous
iteration. The load PRE of the GVN pass often creates these recurrences by
hoisting loads from within loops.
In this patch, we add a new recurrence kind for first-order phi nodes and
attempt to vectorize them if possible. Vectorization is performed by shuffling
the values for the current and previous iterations. The vectorization cost
estimate is updated to account for the added shuffle instruction.
Contributed-by: Matthew Simpson and Chad Rosier <mcrosier@codeaurora.org>
Differential Revision: http://reviews.llvm.org/D16197
llvm-svn: 261346
Summary:
While shrinking types according to the required bits, we can
encounter insert/extract element instructions. This will cause us to
reach an llvm_unreachable statement.
This change adds support for truncating insert/extract element
operations, and adds a regression test.
Reviewers: jmolloy
Subscribers: mzolotukhin, llvm-commits
Differential Revision: http://reviews.llvm.org/D17078
llvm-svn: 260893
This regresses a test in LoopVectorize, so I'll need to go away and think about how to solve this in a way that isn't broken.
From the writeup in PR26071:
What's happening is that ComputeKnownZeroes is telling us that all bits except the LSB are zero. We're then deciding that only the LSB needs to be demanded from the icmp's inputs.
This is where we're wrong - we're assuming that after simplification the bits that were known zero will continue to be known zero. But they're not - during trivialization the upper bits get changed (because an XOR isn't shrunk), so the icmp fails.
The fault is in demandedbits - its contract does clearly state that a non-demanded bit may either be zero or one.
llvm-svn: 259649
The order in which instructions are truncated in truncateToMinimalBitwidths
effects code generation. Switch to a map with a determinisic order, since the
iteration order over a DenseMap is not defined.
This code is not hot, so the difference in container performance isn't
interesting.
Many thanks to David Blaikie for making me aware of MapVector!
Fixes PR25490.
Differential Revision: http://reviews.llvm.org/D14981
llvm-svn: 254179
Implemented as many of Michael's suggestions as were possible:
* clang-format the added code while it is still fresh.
* tried to change Value* to Instruction* in many places in computeMinimumValueSizes - unfortunately there are several places where Constants need to be handled so this wasn't possible.
* Reduce the pass list on loop-vectorization-factors.ll.
* Fix a bug where we were querying MinBWs for I->getOperand(0) but using MinBWs[I].
llvm-svn: 252469
C semantics force sub-int-sized values (e.g. i8, i16) to be promoted to int
type (e.g. i32) whenever arithmetic is performed on them.
For targets with native i8 or i16 operations, usually InstCombine can shrink
the arithmetic type down again. However InstCombine refuses to create illegal
types, so for targets without i8 or i16 registers, the lengthening and
shrinking remains.
Most SIMD ISAs (e.g. NEON) however support vectors of i8 or i16 even when
their scalar equivalents do not, so during vectorization it is important to
remove these lengthens and truncates when deciding the profitability of
vectorization.
The algorithm this uses starts at truncs and icmps, trawling their use-def
chains until they terminate or instructions outside the loop are found (or
unsafe instructions like inttoptr casts are found). If the use-def chains
starting from different root instructions (truncs/icmps) meet, they are
unioned. The demanded bits of each node in the graph are ORed together to form
an overall mask of the demanded bits in the entire graph. The minimum bitwidth
that graph can be truncated to is the bitwidth minus the number of leading
zeroes in the overall mask.
The intention is that this algorithm should "first do no harm", so it will
never insert extra cast instructions. This is why the use-def graphs are
unioned, so that subgraphs with different minimum bitwidths do not need casts
inserted between them.
This algorithm works hard to reduce compile time impact. DemandedBits are only
queried if there are extends of illegal types and if a truncate to an illegal
type is seen. In the general case, this results in a simple linear scan of the
instructions in the loop.
No non-noise compile time impact was seen on a clang bootstrap build.
llvm-svn: 250032
This patch enables small size reductions in which the source types are smaller
than the reduction type (e.g., computing an i16 sum from the values in an i8
array). The previous behavior was to only allow small size reductions if the
source types and reduction type were the same. The change accounts for the fact
that the existing sign- and zero-extend instructions in these cases should
still be included in the cost model.
Differential Revision: http://reviews.llvm.org/D12770
llvm-svn: 247337
Summary:
This change turns on by default interleaved access vectorization
for AArch64.
We also clean up some tests which were spedifically enabling this
behaviour.
Reviewers: rengolin
Subscribers: aemerson, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D12149
llvm-svn: 246542
Summary:
Fix the cost of interleaved accesses for ARM/AArch64.
We were calling getTypeAllocSize and using it to check
the number of bits, when we should have called
getTypeAllocSizeInBits instead.
This would pottentially cause the vectorizer to
generate loads/stores and shuffles which cannot
be matched with an interleaved access instruction.
No performance changes are expected for now since
matching/generating interleaved accesses is still
disabled by default.
Reviewers: rengolin
Subscribers: aemerson, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D11524
llvm-svn: 243270
Interleaved memory accesses are grouped and vectorized into vector load/store and shufflevector.
E.g. for (i = 0; i < N; i+=2) {
a = A[i]; // load of even element
b = A[i+1]; // load of odd element
... // operations on a, b, c, d
A[i] = c; // store of even element
A[i+1] = d; // store of odd element
}
The loads of even and odd elements are identified as an interleave load group, which will be transfered into vectorized IRs like:
%wide.vec = load <8 x i32>, <8 x i32>* %ptr
%vec.even = shufflevector <8 x i32> %wide.vec, <8 x i32> undef, <4 x i32> <i32 0, i32 2, i32 4, i32 6>
%vec.odd = shufflevector <8 x i32> %wide.vec, <8 x i32> undef, <4 x i32> <i32 1, i32 3, i32 5, i32 7>
The stores of even and odd elements are identified as an interleave store group, which will be transfered into vectorized IRs like:
%interleaved.vec = shufflevector <4 x i32> %vec.even, %vec.odd, <8 x i32> <i32 0, i32 4, i32 1, i32 5, i32 2, i32 6, i32 3, i32 7>
store <8 x i32> %interleaved.vec, <8 x i32>* %ptr
This optimization is currently disabled by defaut. To try it by adding '-enable-interleaved-mem-accesses=true'.
llvm-svn: 239291
Essentially the same as the GEP change in r230786.
A similar migration script can be used to update test cases, though a few more
test case improvements/changes were required this time around: (r229269-r229278)
import fileinput
import sys
import re
pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)")
for line in sys.stdin:
sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line))
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7649
llvm-svn: 230794
One of several parallel first steps to remove the target type of pointers,
replacing them with a single opaque pointer type.
This adds an explicit type parameter to the gep instruction so that when the
first parameter becomes an opaque pointer type, the type to gep through is
still available to the instructions.
* This doesn't modify gep operators, only instructions (operators will be
handled separately)
* Textual IR changes only. Bitcode (including upgrade) and changing the
in-memory representation will be in separate changes.
* geps of vectors are transformed as:
getelementptr <4 x float*> %x, ...
->getelementptr float, <4 x float*> %x, ...
Then, once the opaque pointer type is introduced, this will ultimately look
like:
getelementptr float, <4 x ptr> %x
with the unambiguous interpretation that it is a vector of pointers to float.
* address spaces remain on the pointer, not the type:
getelementptr float addrspace(1)* %x
->getelementptr float, float addrspace(1)* %x
Then, eventually:
getelementptr float, ptr addrspace(1) %x
Importantly, the massive amount of test case churn has been automated by
same crappy python code. I had to manually update a few test cases that
wouldn't fit the script's model (r228970,r229196,r229197,r229198). The
python script just massages stdin and writes the result to stdout, I
then wrapped that in a shell script to handle replacing files, then
using the usual find+xargs to migrate all the files.
update.py:
import fileinput
import sys
import re
ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
def conv(match, line):
if not match:
return line
line = match.groups()[0]
if len(match.groups()[5]) == 0:
line += match.groups()[2]
line += match.groups()[3]
line += ", "
line += match.groups()[1]
line += "\n"
return line
for line in sys.stdin:
if line.find("getelementptr ") == line.find("getelementptr inbounds"):
if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("):
line = conv(re.match(ibrep, line), line)
elif line.find("getelementptr ") != line.find("getelementptr ("):
line = conv(re.match(normrep, line), line)
sys.stdout.write(line)
apply.sh:
for name in "$@"
do
python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name"
rm -f "$name.tmp"
done
The actual commands:
From llvm/src:
find test/ -name *.ll | xargs ./apply.sh
From llvm/src/tools/clang:
find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}"
From llvm/src/tools/polly:
find test/ -name *.ll | xargs ./apply.sh
After that, check-all (with llvm, clang, clang-tools-extra, lld,
compiler-rt, and polly all checked out).
The extra 'rm' in the apply.sh script is due to a few files in clang's test
suite using interesting unicode stuff that my python script was throwing
exceptions on. None of those files needed to be migrated, so it seemed
sufficient to ignore those cases.
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7636
llvm-svn: 230786
cost model for signed division by power of 2 was improved for AArch64.
The revision r218607 missed test case for Loop Vectorization.
Adding it in this revision.
Differential Revision: http://reviews.llvm.org/D6181
llvm-svn: 221674
This commit starts with a "git mv ARM64 AArch64" and continues out
from there, renaming the C++ classes, intrinsics, and other
target-local objects for consistency.
"ARM64" test directories are also moved, and tests that began their
life in ARM64 use an arm64 triple, those from AArch64 use an aarch64
triple. Both should be equivalent though.
This finishes the AArch64 merge, and everyone should feel free to
continue committing as normal now.
llvm-svn: 209577
I'm doing this in two phases for a better "git blame" record. This
commit removes the previous AArch64 backend and redirects all
functionality to ARM64. It also deduplicates test-lines and removes
orphaned AArch64 tests.
The next step will be "git mv ARM64 AArch64" and rewire most of the
tests.
Hopefully LLVM is still functional, though it would be even better if
no-one ever had to care because the rename happens straight
afterwards.
llvm-svn: 209576
Tested by comparing make check VERBOSE=1 before and after to make sure
no tests are missed. (VERBOSE=1 prints the list of tests.)
Only one test :( remains where .cpp is required:
tools/llvm-cov/range_based_for.cpp:// RUN: llvm-cov range_based_for.cpp | FileCheck %s --check-prefix=STDOUT
The topic was discussed in this thread:
http://lists.cs.uiuc.edu/pipermail/llvm-commits/Week-of-Mon-20140428/214905.html
llvm-svn: 208621
