Use AddressAlign field's value to properly align sections content in the
yaml2obj tool. Before this change the yaml2obj ignored AddressAlign and
always aligned section on 16 bytes boundary.
llvm-svn: 241674
Summary:
Often filter-like loops will do memory accesses that are
separated by constant offsets. In these cases it is
common that we will exceed the threshold for the
allowable number of checks.
However, it should be possible to merge such checks,
sice a check of any interval againt two other intervals separated
by a constant offset (a,b), (a+c, b+c) will be equivalent with
a check againt (a, b+c), as long as (a,b) and (a+c, b+c) overlap.
Assuming the loop will be executed for a sufficient number of
iterations, this will be true. If not true, checking against
(a, b+c) is still safe (although not equivalent).
As long as there are no dependencies between two accesses,
we can merge their checks into a single one. We use this
technique to construct groups of accesses, and then check
the intervals associated with the groups instead of
checking the accesses directly.
Reviewers: anemet
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10386
llvm-svn: 241673
option that works with all object container formats.
Now that clang modules/PCH are object containers this option is useful to
to construct pipes like
llvm-objdump -raw-clang-ast foo.pcm | llvm-bcanalyzer -
to inspect the AST contents in a PCH container.
Will be tested via clang.
Belatedly addresses review feedback for r233390.
llvm-svn: 241659
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: llvm-commits, rafael, yaron.keren
Differential Revision: http://reviews.llvm.org/D11017
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 241655
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: yaron.keren, rafael, llvm-commits
Differential Revision: http://reviews.llvm.org/D11009
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 241654
The incoming EBP value points to the end of a local stack allocation, so
we can use that to restore ESI, the base pointer. Once we do that, we
can use local stack allocations. If we know we need stack realignment,
spill the original frame pointer in the prologue and reload it after
restoring ESI.
llvm-svn: 241648
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: llvm-commits, rafael, yaron.keren
Differential Revision: http://reviews.llvm.org/D11010
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 241646
This commit adopts the 'ModuleSlotTracker' class, which was surfaced in r240842,
to print the global address operands. This change ensures that the slot tracker
won't have to be recreated every time a global address operand is printed,
making the MIR printing more efficient.
llvm-svn: 241645
Tim Northover has told me that they can occur when the compiler cleverly
constructs constants - as demonstrated in the test case.
rdar://21703486
llvm-svn: 241641
Summary:
Initially, these intrinsics seemed like part of a family of "frame"
related intrinsics, but now I think that's more confusing than helpful.
Initially, the LangRef specified that this would create a new kind of
allocation that would be allocated at a fixed offset from the frame
pointer (EBP/RBP). We ended up dropping that design, and leaving the
stack frame layout alone.
These intrinsics are really about sharing local stack allocations, not
frame pointers. I intend to go further and add an `llvm.localaddress()`
intrinsic that returns whatever register (EBP, ESI, ESP, RBX) is being
used to address locals, which should not be confused with the frame
pointer.
Naming suggestions at this point are welcome, I'm happy to re-run sed.
Reviewers: majnemer, nicholas
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11011
llvm-svn: 241633
Summary:
The tools CMakeLists file already had implicit tool registration, but there were a few things off about it that needed to be altered to make it work. This change addresses all that. The changes in this patch are:
* factored out canonicalizing tool names from paths to CMake variables
* removed the LLVM_IMPLICIT_PROJECT_IGNORE mechanism in favor of LLVM_EXTERNAL_${nameUPPER}_BUILD which I renamed to LLVM_TOOL_${nameUPPER}_BUILD because it applies to internal and external tools
* removed ignore_llvm_tool_subdirectory() in favor of just setting LLVM_TOOL_${nameUPPER}_BUILD to Off
* Added create_llvm_tool_options() to resolve a bug in add_llvm_external_project() - the old LLVM_EXTERNAL_${nameUPPER}_BUILD would not work on a clean CMake directory because the option could be created after it was set in code.
* Removed all but the minimum required calls to add_llvm_external_project from tools/CMakeLists.txt
Reviewers: bogner, samsonov, chapuni, beanz
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10665
llvm-svn: 241621
Summary:
SelectionDAG itself is not invoking directly the DataLayout in the
TargetMachine, but the "TargetLowering" class is still using it. I'll
address it in a following commit.
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11000
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 241618
This reverts commit r241602. We had a latent bug in SCCP where we would
make a basic block empty and then proceed to ask questions about it's
terminator.
llvm-svn: 241616
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10987
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 241615
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10986
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 241614
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10985
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 241613
Summary:
This change is part of a series of commits dedicated to have a
single DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10984
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 241610
This commit modifies the interface for the machine instruction parsing
functions by wrapping the parameter 'MBBSlots' in a new structure called
'PerFunctionMIParsingState'. This change is useful as in the future I will be
able to pass new parameters to the machine instruction parser just by modifying
the 'PerFunctionMIParsingState' structure instead of adding a new parameter to
each function.
llvm-svn: 241607
getSymbolValue now returns a value that in convenient for most callers:
* 0 for undefined
* symbol size for common symbols
* offset/address for symbols the rest
Code that needs something more specific can check getSymbolFlags.
llvm-svn: 241605
of the build stages that are sent through a pipe (e.g. tee) failed.
This potentially allowed builds and/or tests to fail without anyone
noticing. It appears that for the LLVM 3.6.[01] releases this actually
happened for the Ubuntu 14.04LTS binary releases. The essence of the
issue is that without ``set -o pipefail`` the following command in bash
has a zero exit code.
false | tee /dev/null ; exit $?
llvm-svn: 241599
This type of prologue isn't supported yet. Implementing it should be a
matter of copying the adjusted incoming EBP into ESI (the base pointer)
instead of EBP. The original EBP can be saved and restored from other
memory afterwards.
llvm-svn: 241597
This includes code that is intended to be target-independent as well
as the Hexagon-specific details. This is just the framework without
any users.
llvm-svn: 241595
At least not in the interface exposed by ObjectFile. This matches what ELF and
COFF implement.
Adjust existing code that was expecting them to have values. No overall
functionality change intended.
Another option would be to change the interface and the ELF and COFF
implementations to say that the value of a common symbol is its size.
llvm-svn: 241593
This commit changes the target arch to fix the test case commited in r241566
that was failing on ninja-x64-msvc-RA-centos6. Also add checks to make sure
the callee's address is loaded to blx's operand.
llvm-svn: 241588
They are implemented like that in some object formats, but for the interface
provided by lib/Object, SF_Undefined and SF_Common are different things.
This matches the ELF and COFF implementation and fixes llvm-nm for MachO.
llvm-svn: 241587
In these two contexts we really just want the raw n_value. No need to use
getSymbolValue which checks for special cases where, semantically, the symbol
has no value.
llvm-svn: 241584
getFirstNonPHI's documentation states that it returns null if there is
no non-PHI instruction. However, it instead returns a pointer to the
end iterator. The implementation of getFirstNonPHI claims that
dereferencing the iterator will result in an assertion failure but this
doesn't occur. Instead, machinery like getFirstInsertionPt will attempt
to isa<> this invalid memory which results in unpredictable behavior.
Instead, make getFirst* return null if no such instruction exists.
llvm-svn: 241570
