Summary:
Don't use the metadata on call instructions for determining hotness
unless we are in sample PGO mode, where it is needed because profile
counts are not accurate. In instrumentation mode this is not necessary
and does more harm than good when calls have VP metadata that hasn't
been properly scaled after transformations or dropped after constant
prop based devirtualization (both should be fixed, but we don't need
to do this in the first place for instrumentation PGO).
This required adjusting a number of tests to distinguish between sample
and instrumentation PGO handling, and to add in profile summary metadata
so that getProfileCount can get the summary.
Reviewers: davidxl, danielcdh
Subscribers: aemerson, rengolin, mehdi_amini, Prazek, llvm-commits
Differential Revision: https://reviews.llvm.org/D32877
llvm-svn: 302844
Avoid using report_fatal_error, because it will ask the user to file a
bug. If the user attempts to disable SSE on x86_64 and them use floating
point, that's a bug in their code, not a bug in the compiler.
This is just a start. There are other ways to crash the backend in this
configuration, but they should be updated to follow this pattern.
Differential Revision: https://reviews.llvm.org/D27522
llvm-svn: 302835
According to Power ISA V3.0 document, the first source operand of mtvsrdd is constant 0 if r0 is specified. So the corresponding register constraint should be g8rc_nox0.
This bug caused wrong output generated by 401.bzip2 when -mcpu=power9 and fdo are specified.
Differential Revision: https://reviews.llvm.org/D32880
llvm-svn: 302834
I ran the test-suite (including SPEC 2006) in PGO mode comparing cold
thresholds of 225 and 45. Here are some stats on the text size:
Out of 904 tests that ran, 197 see a change in text size. The average
text size reduction (of all the 904 binaries) is 1.07%. Of the 197
binaries, 19 see a text size increase, as high as 18%, but most of them
are small single source benchmarks. There are 3 multisource benchmarks
with a >0.5% size increase (0.7, 1.3 and 2.1 are their % increases). On
the other side of the spectrum, 31 benchmarks see >10% size reduction
and 6 of them are MultiSource.
I haven't run the test-suite with other values of inlinecold-threshold.
Since we have a cold callsite threshold of 45, I picked this value.
Differential revision: https://reviews.llvm.org/D33106
llvm-svn: 302829
The erase/remove from parent methods now use a switch table to remove
themselves from their appropriate parent ilist.
The copyAttributesFrom method is now completely non-virtual, since we
only ever copy attributes from a global of the appropriate type.
Pre-requisite to de-virtualizing Value to save a vptr
(https://reviews.llvm.org/D31261).
NFC
llvm-svn: 302823
Updates the MSP430 target to generate EABI-compatible libcall names.
As a byproduct, adjusts the hardware multiplier options available in
the MSP430 target, adds support for promotion of the ISD::MUL operation
for 8-bit integers, and correctly marks R11 as used by call instructions.
Patch by Andrew Wygle.
Differential Revision: https://reviews.llvm.org/D32676
llvm-svn: 302820
The testcase in PR32984 shows a non linear compile time increase
after a change that made the LoopUnroll pass more aggressive
(increasing the threshold).
My profiling shows all the time of PHI elimination goes to
llvm::LiveVariables::addNewBlock. This is because we keep
Defs/Kills registers in a SmallSet and vfind(const T &V); is O(N).
Switching to a DenseSet reduces the time spent in the pass from
297 seconds to 97 seconds. Profiling still shows a lot of time is
spent iterating the data structure, so I guess there's room for
improvement.
Dan tells me GCC uses real set operations for live registers and
it takes no-time on this testcase. Matthias points out we might
want to switch all this to LiveIntervalAnalysis so it's not entirely
sure if a rewrite is worth it.
Differential Revision: https://reviews.llvm.org/D33088
llvm-svn: 302819
We don't use it and it was removed in gfx9, and the encoding
bit repurposed.
Additionally actually using it requires changing the output register
class, which wasn't done anyway.
llvm-svn: 302814
Earlier fix D32572 introduced a bug where live-ins were calculated
for basic block instead of scheduling region. This change fixes it.
Differential Revision: https://reviews.llvm.org/D33086
llvm-svn: 302812
The approach I followed was to emit the remark after getTreeCost concludes
that SLP is profitable. I initially tried emitting them after the
vectorizeRootInstruction calls in vectorizeChainsInBlock but I vaguely
remember missing a few cases for example in HorizontalReduction::tryToReduce.
ORE is placed in BoUpSLP so that it's available from everywhere (notably
HorizontalReduction::tryToReduce).
We use the first instruction in the root bundle as the locator for the remark.
In order to get a sense how far the tree is spanning I've include the size of
the tree in the remark. This is not perfect of course but it gives you at
least a rough idea about the tree. Then you can follow up with -view-slp-tree
to really see the actual tree.
llvm-svn: 302811
This patch is the first in a series of patches to provide code gen for
doing compares in GPRs when the compare result is required in a GPR.
It adds the infrastructure to select GPR sequences for i1->i32 and i1->i64
extensions. This first patch handles equality comparison on i32 operands with
the result sign or zero extended.
Differential Revision: https://reviews.llvm.org/D31847
llvm-svn: 302810
A recent commit made GlobalVariable.h depend on intrinsics generation, so (I
think) it needs to be in the lower-level module. I'll confirm with others, but
this should fix the bots.
llvm-svn: 302803
This patch extends llvm-ir to allow attributes to be set on global variables.
An RFC was sent out earlier by my colleague James Molloy: http://lists.llvm.org/pipermail/cfe-dev/2017-March/053100.html
A key part of that proposal was to extend LLVM-IR to carry attributes on global variables.
This generic feature could be useful for multiple purposes.
In our present context, it would be useful to carry user specified sections for bss/rodata/data.
Reviewed by: Jonathan Roelofs, Reid Kleckner
Differential Revision: https://reviews.llvm.org/D32009
llvm-svn: 302794
Introduce LoopVectorizationPlanner.executePlan(), replacing ILV.vectorize() and
refactoring ILV.vectorizeLoop(). Method collectDeadInstructions() is moved from
ILV to LVP. These changes facilitate building VPlans and using them to generate
code, following https://reviews.llvm.org/D28975 and its tentative breakdown.
Method ILV.createEmptyLoop() is renamed ILV.createVectorizedLoopSkeleton() to
improve clarity; it's contents remain intact.
Differential Revision: https://reviews.llvm.org/D32200
llvm-svn: 302790
It turned out that MSan was incorrectly calculating the shadow for int comparisons: it was done by truncating the result of (Shadow1 OR Shadow2) to i1, effectively rendering all bits except LSB useless.
This approach doesn't work e.g. in the case where the values being compared are even (i.e. have the LSB of the shadow equal to zero).
Instead, if CreateShadowCast() has to cast a bigger int to i1, we replace the truncation with an ICMP to 0.
This patch doesn't affect the code generated for SPEC 2006 binaries, i.e. there's no performance impact.
For the test case reported in PR32842 MSan with the patch generates a slightly more efficient code:
orq %rcx, %rax
jne .LBB0_6
, instead of:
orl %ecx, %eax
testb $1, %al
jne .LBB0_6
llvm-svn: 302787
manages to form a VSELECT with a non-i1 element type condition. Those
are technically allowed in SDAG (at least, the generic type legalization
logic will form them and I wouldn't want to try to audit everything te
preclude forming them) so we need to be able to lower them.
This isn't too hard to implement. We mark VSELECT as custom so we get
a chance in C++, add a fast path for i1 conditions to get directly
handled by the patterns, and a fallback when we need to manually force
the condition to be an i1 that uses the vptestm instruction to turn
a non-mask into a mask.
This, unsurprisingly, generates awful code. But it at least doesn't
crash. This was actually impacting open source packages built with LLVM
for AVX-512 in the wild, so quickly landing a patch that at least stops
the immediate bleeding.
I think I've found where to fix the codegen quality issue, but less
confident of that change so separating it out from the thing that
doesn't change the result of any existing test case but causes mine to
not crash.
llvm-svn: 302785
This is the same as r292827 for AArch64: we widen 8- and 16-bit ADD, SUB
and MUL to 32 bits since we only have TableGen patterns for 32 bits.
See the commit message for r292827 for more details.
At this point we could just remove some of the tests for regbankselect
and instruction-select, since we're not going to see any narrow
operations at those levels anymore. Instead I decided to update them
with G_ANYEXT/G_TRUNC operations, so we can validate the full sequences
generated by the legalizer.
llvm-svn: 302782
G_ANYEXT can be introduced by the legalizer when widening scalars. Add
support for it in the register bank info (same mapping as everything
else) and in the instruction selector.
When selecting it, we treat it as a COPY, just like G_TRUNC. On this
occasion we get rid of some assertions in selectCopy so we can reuse it.
This shouldn't be a problem at the moment since we're not supporting any
complicated cases (e.g. FPR, different register banks). We might want to
separate the paths when we do.
llvm-svn: 302778
Summary:
Move getX86ConditionCode() from X86FastISel.cpp to X86InstrInfo.cpp so it can be used by GloabalIsel instruction selector.
This is a pre-commit for a patch I'm working on to support G_ICMP. NFC.
Reviewers: zvi, guyblank, delena
Reviewed By: guyblank, delena
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D33038
llvm-svn: 302767
This time it actually occurred to me to change the #defines
to actually test the pre-processed out codepath. Hopefully
this time it works.
llvm-svn: 302752
This reverts r302712.
The change fails with ASAN enabled:
ERROR: AddressSanitizer: use-after-poison on address ... at ...
READ of size 2 at ... thread T0
#0 ... in llvm::SDNode::getNumValues() const <snip>/include/llvm/CodeGen/SelectionDAGNodes.h:855:42
#1 ... in llvm::SDNode::hasAnyUseOfValue(unsigned int) const <snip>/lib/CodeGen/SelectionDAG/SelectionDAG.cpp:7270:3
#2 ... in llvm::SDValue::use_empty() const <snip> include/llvm/CodeGen/SelectionDAGNodes.h:1042:17
#3 ... in (anonymous namespace)::DAGCombiner::MergeConsecutiveStores(llvm::StoreSDNode*) <snip>/lib/CodeGen/SelectionDAG/DAGCombiner.cpp:12944:7
Reviewers: niravd
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D33081
llvm-svn: 302746
