Pulled out the code used by PSHUFB/VPERMV/VPERMV3 shuffle mask decoding into common helper functions.
The helper functions handle masks coming from BROADCAST/BUILD_VECTOR and ConstantPool nodes respectively.
llvm-svn: 260032
Choose between MOVD/MOVSS and MOVQ/MOVSD depending on the target vector type.
This has a lot fewer test changes than trying to add this to X86InstrInfo::setExecutionDomain.....
llvm-svn: 259816
This patch adds support for consecutive (load/undef elements) 32-bit loads, followed by trailing undef/zero elements to be combined to a single MOVD load.
Differential Revision: http://reviews.llvm.org/D16729
llvm-svn: 259796
Follow up to D16217 and D16729
This change uncovered an odd pattern where VZEXT_LOAD v4i64 was being lowered to a load of the lower v2i64 (so the 2nd i64 destination element wasn't being zeroed), I can't find any use/reason for this and have removed the pattern and replaced it so only the 1st i64 element is loaded and the upper bits all zeroed. This matches the description for X86ISD::VZEXT_LOAD
Differential Revision: http://reviews.llvm.org/D16768
llvm-svn: 259635
Minor patch to trace back through target shuffles to the source of the inserted element in a (V)INSERTPS shuffle.
Differential Revision: http://reviews.llvm.org/D16652
llvm-svn: 259343
Enable truncate 128/256bit packed byte/word with AVX512BW but without AVX512VL, use 512bit instructions.
Differential Revision: http://reviews.llvm.org/D16531
llvm-svn: 259044
This patch adds support for trailing zero elements to VZEXT_LOAD loads (and checks that no zero elts occur within the consecutive load).
It also generalizes the 64-bit VZEXT_LOAD load matching to work for loads other than 2x32-bit loads.
After this patch it will also be easier to add support for other basic load patterns like 32-bit VZEXT_LOAD loads, PMOVZX and subvector load insertion.
Differential Revision: http://reviews.llvm.org/D16217
llvm-svn: 258798
There's a special case in EmitLoweredSelect() that produces an improved
lowering for cmov(cmov) patterns. However this special lowering is
currently broken if the inner cmov has multiple users so this patch
stops using it in this case.
If you wonder why this wasn't fixed by continuing to use the special
lowering and inserting a 2nd PHI for the inner cmov: I believe this
would incur additional copies/register pressure so the special lowering
does not improve upon the normal one anymore in this case.
This fixes http://llvm.org/PR26256 (= rdar://24329747)
llvm-svn: 258729
VPMADD52LUQ - Packed Multiply of Unsigned 52-bit Integers and Add the Low 52-bit Products to Qword Accumulators
VPMADD52HUQ - Packed Multiply of Unsigned 52-bit Unsigned Integers and Add High 52-bit Products to 64-bit Accumulators
Differential Revision: http://reviews.llvm.org/D16407
llvm-svn: 258680
Generalised mask generation / subvector extraction to use the input/output types directly instead of an if/else through all the currently accepted types.
llvm-svn: 258645
If the INSERTPS zeroes out all the referenced elements from either of the 2 input vectors (and the input is not already UNDEF), then set that input to UNDEF to reduce dependencies.
llvm-svn: 258622
Better handling of the annoying pshuflw/pshufhw ops which only shuffle lower/upper halves of a vector.
Added vXi16 unary shuffle support for cases where i16 elements (from the same half of the source) are being splatted to the whole of one of the halves. This avoids the general lowering case which must shuffle the 32-bit elements first - meaning that we used to end up with unnecessary duplicate pshuflw/pshufhw shuffles.
Note this has the side effect of a lot of SSSE3 test cases no longer needing to use PSHUFB, as it falls below the 3 op combine threshold for when PSHUFB is typically worth it. I've raised PR26183 to discuss if the threshold should be changed and whether we need to make it more specific to the target CPU.
Differential Revision: http://reviews.llvm.org/D14901
llvm-svn: 258440
As vector shuffles can only reference two inputs many (V)INSERTPS patterns end up being split over two targets shuffles.
This patch adds combines to attempt to combine (V)INSERTPS nodes with input/output nodes that are just zeroing out these additional vector elements.
Differential Revision: http://reviews.llvm.org/D16072
llvm-svn: 258205
AVX2 can only broadcast from the zero'th element of a vector, but if the broadcastable element is the zero'th element of a 128-bit subvector its advantageous to extract the subvector, broadcast from that and avoid the loading of shuffle mask data that would be needed for VPERMPS/VPERMD. The only exception being when the source type is 4f64 or 4i64 which can directly use the immediate shuffle VPERMPD/VPERMQ directly.
Differential Revision: http://reviews.llvm.org/D16050
llvm-svn: 258081
Added support for the extraction of the upper 128-bit subvectors for lower/upper half undef shuffles if it would reduce the number of extractions/insertions or avoid loads of AVX2 permps/permd shuffle masks.
Minor follow up to D15477.
llvm-svn: 258000
FIXME: Add more targets to use emutls into clang/test/Driver/emulated-tls.cpp.
FIXME: Add cygwin tests into llvm/test/CodeGen/X86. Working in progress.
llvm-svn: 257984
When we have a single basic block, the explicit copy-back instructions should
be inserted right before the terminator. Before this fix, they were wrongly
placed at the beginning of the basic block.
I will commit fixes to other platforms as well.
PR26136
llvm-svn: 257925
We rely on HasOpaqueSPAdjustment not changing after we've calculated
things based on it. Things like whether or not we can use 'rep;movs' to
copy bytes around, that sort of thing. If it changes, invariants in the
backend will quietly break. This situation arose when we had a call to
memcpy *and* a COPY of the FLAGS register where we would attempt to
reference local variables using %esi, a register that was clobbered by
the 'rep;movs'.
This fixes PR26124.
llvm-svn: 257730
AVX1 v8i32/v4i64 shuffles are bitcasted to v8f32/v4f64, this patch peeks through any bitcast to check for a load node to allow broadcasts to occur.
This is a re-commit of r257055 after r257264 fixed 32-bit broadcast loads of i64 scalars.
llvm-svn: 257266
AVX1 v8i32/v4i64 shuffles are bitcasted to v8f32/v4f64, this patch peeks through bitcasts to check for a load node to allow broadcasts to occur.
Follow up to D15310
llvm-svn: 257055
Follow up to D15378, added INSERTPS to the list of decodable target shuffles and enabled XFormVExtractWithShuffleIntoLoad to handle target shuffles with SentinelZero and tested this with INSERTPS.
llvm-svn: 257046
getTargetShuffleMask may return shuffle masks with SM_SentinelZero (-2) values (currently just for PSHUFB but VPERM2X128 as well with this patch). Although some calling functions can make use of this (mainly for shuffle combining), others can not and their inclusion makes shuffle mask comparisons more difficult.
This patch adds a flag to getTargetShuffleMask to indicate if the calling function can't handle SM_SentinelZero; getTargetShuffleMask will then return false if it occurs to make handling much easier.
I've tidied up some uses of getTargetShuffleMask to better indicate what is going on - more could be done but at present I don't have test cases to demonstrate it.
Some upcoming patches will make use of this to both support more uses where SM_SentinelZero is not permitted (e.g. combineShuffleToAddSub), and also will allow us to add INSERTPS support to getTargetShuffleMask as part of better zero handling discussed in D14261.
Differential Revision: http://reviews.llvm.org/D15378
llvm-svn: 256992
As discussed on D15378, move the mask.empty() tests to after the switch statement and consider any shuffle decode where the extracted target shuffle mask is empty as a failure.
llvm-svn: 256921
We queried hasFP before we hit ExpandISelPseudos. ExpandISelPseudos
manipulated state that hasFP relied on, potentially changing the result
after it has been queried elsewhere.
While I am not aware of any particular bug due to this state of affairs,
it seems best to avoid it entirely by changing the state during DAG
construction.
llvm-svn: 256849
PBLEND/BLENDPD/BLENDPS are no different to the other target shuffles and this will make future improvements to the target shuffle combines more straightforward.
llvm-svn: 256819
We need a frame pointer if there is a push/pop sequence after the
prologue in order to unwind the stack. Scanning the instructions to
figure out if this happened made hasFP not constant-time which is a
violation of expectations. Let's compute this up-front and reuse that
computation when we need it.
llvm-svn: 256730
LLVM's targets need to know if stack pointer adjustments occur after the
prologue. This is needed to correctly determine if the red-zone is
appropriate to use or if a frame pointer is required.
Normally, LLVM can figure this out very precisely by reasoning about the
contents of the MachineFunction. There is an interesting corner case:
inline assembly.
The vast majority of inline assembly which will perform a push or pop is
done so to pair up with pushf or popf as appropriate. Unfortunately,
this inline assembly doesn't mark the stack pointer as clobbered
because, well, it isn't. The stack pointer is decremented and then
immediately incremented. Because of this, LLVM was changed in r256456
to conservatively assume that inline assembly contain a sequence of
stack operations. This is unfortunate because the vast majority of
inline assembly will not end up manipulating the stack pointer in any
way at all.
Instead, let's provide a more principled solution: an intrinsic.
FWIW, other compilers (MSVC and GCC among them) also provide this
functionality as an intrinsic.
llvm-svn: 256685
This adds support for the MCU psABI in a way different from r251223 and r251224,
basically reverting most of these two patches. The problem with the approach
taken in r251223/4 is that it only handled libcalls that originated from the backend.
However, the mid-end also inserts quite a few libcalls and assumes these use the
platform's default calling convention.
The previous patch tried to insert inregs when necessary both in the FE and,
somewhat hackily, in the CG. Instead, we now define a new default calling convention
for the MCU, which doesn't use inreg marking at all, similarly to what x86-64 does.
Differential Revision: http://reviews.llvm.org/D15054
llvm-svn: 256494
lower broadcast<type>x<vector> to shuffles.
there are two cases:
1.src is 128 bits and dest is 512 bits: in this case we will lower it to shuffle with imm = 0.
2.src is 256 bit and dest is 512 bits: in this case we will lower it to shuffle with imm = 01000100b (0x44) that way we will broadcast the 256bit source: ymm[0,1,2,3] => zmm[0,1,2,3,0,1,2,3] then it will mask it with the passthru value (in case it's mask op).
Differential Revision: http://reviews.llvm.org/D15790
llvm-svn: 256490
Fix TRUNCATE lowering vector to vector i1, use LSB and not MSB.
Implement VPMOVB/W/D/Q2M intrinsic.
Differential Revision: http://reviews.llvm.org/D15675
llvm-svn: 256470
First step towards making better use of AVX's implicit zeroing of the upper half of a 256-bit vector by instructions that only act on the lower 128-bit vector - discussed on D14151.
As well as the fact that 128-bit shuffle instructions are generally more capable, this can be performant for older CPUs with 128-bit ALUs (e.g. Jaguar, Sandy Bridge) that must treat 256-bit vectors as multiple micro-ops.
Moved the similar subvector extraction shuffle combines from PerformShuffleCombine256 to lowerVectorShuffle as well.
Note: I've avoided combining shuffles that reference elements from the upper halves of the input vectors - this may be reviewed in future work as well (AVX1 would probably always gain, but AVX2 does have some cross-lane shuffle instructions).
Differential Revision: http://reviews.llvm.org/D15477
llvm-svn: 256332
This patch transforms truncation between vectors of integers into
X86ISD::PACKUS/PACKSS operations during DAG combine. We don't do it in
lowering phase because after type legalization, the original truncation
will be turned into a BUILD_VECTOR with each element that is extracted
from a vector and then truncated, and from them it is difficult to do
this optimization. This greatly improves the performance of truncations
on some specific types.
Cost table is updated accordingly.
Differential revision: http://reviews.llvm.org/D14588
llvm-svn: 256194
It resolves clang selfhosting with std::once() for Cygwin.
FIXME: It may be EmulatedTLS-generic also for X86-Android.
FIXME: Pass EmulatedTLS to LLVM CodeGen from Clang with -femulated-tls.
llvm-svn: 256134
This folds (ashr (shl a, [56,48,32,24,16]), SarConst)
into (shl, (sext (a), [56,48,32,24,16] - SarConst))
or into (lshr, (sext (a), SarConst - [56,48,32,24,16]))
depending on sign of (SarConst - [56,48,32,24,16])
sexts in X86 are MOVs.
The MOVs have the same code size as above SHIFTs (only SHIFT by 1 has lower code size).
However the MOVs have 2 advantages to SHIFTs on x86:
1. MOVs can write to a register that differs from source.
2. MOVs accept memory operands.
This fixes PR24373.
Patch by: evgeny.v.stupachenko@intel.com
Differential Revision: http://reviews.llvm.org/D13161
llvm-svn: 255761
It adjusts from RSP-after-prologue to RBP, which is what SEH filters
need to do before they can use llvm.localrecover.
Fixes SEH filter captures, which were broken in r250088.
Issue reported by Alex Crichton.
llvm-svn: 255707
This patch improves on the suggested codegen from PR24475:
https://llvm.org/bugs/show_bug.cgi?id=24475
but only for the fmaxf() case to start, so we can sort out any bugs before
extending to fmin, f64, and vectors.
The fmax / maxnum definitions provide us flexibility for signed zeros, so the
only thing we have to worry about in this replacement sequence is NaN handling.
Note 1: It may be better to implement this as lowerFMAXNUM(), but that exposes
a problem: SelectionDAGBuilder::visitSelect() transforms compare/select
instructions into FMAXNUM nodes if we declare FMAXNUM legal or custom. Perhaps
that should be checking for NaN inputs or global unsafe-math before transforming?
As it stands, that bypasses a big set of optimizations that the x86 backend
already has in PerformSELECTCombine().
Note 2: The v2f32 test reveals another bug; the vector is extended to v4f32, so
we have completely unnecessary operations happening on undef elements of the
vector.
Differential Revision: http://reviews.llvm.org/D15294
llvm-svn: 255700
Full type legalizer that works with all vectors length - from 2 to 16, (i32, i64, float, double).
This intrinsic, for example
void @llvm.masked.scatter.v2f32(<2 x float>%data , <2 x float*>%ptrs , i32 align , <2 x i1>%mask )
requires type widening for data and type promotion for mask.
Differential Revision: http://reviews.llvm.org/D13633
llvm-svn: 255629
Part 1 was submitted in http://reviews.llvm.org/D15134.
Changes in this part:
* X86RegisterInfo.td, X86RecognizableInstr.cpp: Add FR128 register class.
* X86CallingConv.td: Pass f128 values in XMM registers or on stack.
* X86InstrCompiler.td, X86InstrInfo.td, X86InstrSSE.td:
Add instruction selection patterns for f128.
* X86ISelLowering.cpp:
When target has MMX registers, configure MVT::f128 in FR128RegClass,
with TypeSoftenFloat action, and custom actions for some opcodes.
Add missed cases of MVT::f128 in places that handle f32, f64, or vector types.
Add TODO comment to support f128 type in inline assembly code.
* SelectionDAGBuilder.cpp:
Fix infinite loop when f128 type can have
VT == TLI.getTypeToTransformTo(Ctx, VT).
* Add unit tests for x86-64 fp128 type.
Differential Revision: http://reviews.llvm.org/D11438
llvm-svn: 255558
Summary: This patch adds support of conversion (mul x, 2^N + 1) => (add (shl x, N), x) and (mul x, 2^N - 1) => (sub (shl x, N), x) if the multiplication can not be converted to LEA + SHL or LEA + LEA. LLVM has already supported this on ARM, and it should also be useful on X86. Note the patch currently only applies to cases where the constant operand is positive, and I am planing to add another patch to support negative cases after this.
Reviewers: craig.topper, RKSimon
Subscribers: aemerson, llvm-commits
Differential Revision: http://reviews.llvm.org/D14603
llvm-svn: 255415
Summary: This patch adds support of conversion (mul x, 2^N + 1) => (add (shl x, N), x) and (mul x, 2^N - 1) => (sub (shl x, N), x) if the multiplication can not be converted to LEA + SHL or LEA + LEA. LLVM has already supported this on ARM, and it should also be useful on X86. Note the patch currently only applies to cases where the constant operand is positive, and I am planing to add another patch to support negative cases after this.
Reviewers: craig.topper, RKSimon
Subscribers: aemerson, llvm-commits
Differential Revision: http://reviews.llvm.org/D14603
llvm-svn: 255391
On AVX and AVX2, BROADCAST instructions can load a scalar into all elements of a target vector.
This patch improves the lowering of 'splat' shuffles of a loaded vector into a broadcast - currently the lowering only works for cases where we are splatting the zero'th element, which is now generalised to any element.
Fix for PR23022
Differential Revision: http://reviews.llvm.org/D15310
llvm-svn: 255061
FP logic instructions are supported in DQ extension on AVX-512 target.
I use integer operations instead.
Added tests.
I also enabled FABS in this patch in order to check ANDPS.
The operations are FOR, FXOR, FAND, FANDN.
The instructions, that supported for 512-bit vector under DQ are:
VORPS/PD, VXORPS/PD, VANDPS/PD, FANDNPS/PD.
Differential Revision: http://reviews.llvm.org/D15110
llvm-svn: 254913
Patterns were missing for KNL target for <8 x i32>, <8 x float> masked load/store.
This intrinsic comes with all legal types:
<8 x float> @llvm.masked.load.v8f32(<8 x float>* %addr, i32 align, <8 x i1> %mask, <8 x float> %passThru),
but still requires lowering, because VMASKMOVPS, VMASKMOVDQU32 work with 512-bit vectors only.
All data operands should be widened to 512-bit vector.
The mask operand should be widened to v16i1 with zeroes.
Differential Revision: http://reviews.llvm.org/D15265
llvm-svn: 254909
These instructions are not supported by all CPUs in 64-bit mode. Emitting them
causes Chromium to crash on start-up for users with such chips.
(GCC puts these instructions behind -msahf on 64-bit for the same reason.)
This patch adds FeatureLAHFSAHF, enables it by default for 32-bit targets
and modern CPUs, and changes X86InstrInfo::copyPhysReg back to the lowering
from before r244503 when the instructions are not available.
Differential Revision: http://reviews.llvm.org/D15240
llvm-svn: 254793
Summary:
These ADJCALLSTACK markers don't generate code, but they keep dynamic
alloca code that calls chkstk out of the prologue.
This slightly pessimizes inalloca calls by preventing some register copy
coalescing, but I can live with that.
Reviewers: qcolombet
Subscribers: hans, llvm-commits
Differential Revision: http://reviews.llvm.org/D15200
llvm-svn: 254645
On FMA targets, we can avoid having to load a constant to negate a float/double multiply by instead using a FNMSUB (-(X*Y)-0)
Fix for PR24366
Differential Revision: http://reviews.llvm.org/D14909
llvm-svn: 254495