Summary:
This exposes LTO's Conf.SampleProfile as a command line option
(-lto-sample-profile-file) for testing via the llvm-lto2 utility.
Reviewers: pcc, danielcdh
Subscribers: mehdi_amini, inglorion, llvm-commits
Differential Revision: https://reviews.llvm.org/D36030
llvm-svn: 309456
Summary:
Inlining threshold is increased by application of bonuses when the
callee has a single reachable basic block or is rich in vector
instructions. Similarly, inlining cost is reduced by applying a large
bonus when the last call to a static function is considered for
inlining. This patch disables the application of these bonuses when the
callsite or the callee is cold. The intention here is to prevent a large
cold callsite from being inlined to a non-cold caller that could prevent
the caller from being inlined. This is especially important when the
cold callsite is a last call to a static since the associated bonus is
very high.
Reviewers: chandlerc, davidxl
Subscribers: danielcdh, llvm-commits
Differential Revision: https://reviews.llvm.org/D35823
llvm-svn: 309441
This should fix googletest-format test failures on the clang modules
buildbots, which have a stale copy of the OneTest script in the build
directory.
llvm-svn: 309432
There is no situation where this rarely-used argument cannot be
substituted with a DIExpression and removing it allows us to simplify
the DWARF backend. Note that this patch does not yet remove any of
the newly dead code.
rdar://problem/33580047
Differential Revision: https://reviews.llvm.org/D35951
llvm-svn: 309426
Summary:
After some changes in SLP vectorizer we missed some additional checks to
limit the instructions for vectorization. We should not perform analysis
of the instructions if the parent of instruction is not the same as the
parent of the first instruction in the tree or it was analyzed already.
Subscribers: mzolotukhin
Differential Revision: https://reviews.llvm.org/D34881
llvm-svn: 309425
The conditional tail call logic did the wrong thing when both
destinations of a conditional branch were the same:
BB#1: derived from LLVM BB %entry
Live Ins: %EFLAGS
Predecessors according to CFG: BB#0
JE_1 <BB#5>, %EFLAGS<imp-use,kill>
JMP_1 <BB#5>
BB#5: derived from LLVM BB %sw.epilog
Predecessors according to CFG: BB#1
TCRETURNdi64 <ga:@mergeable_conditional_tailcall>, 0, ...
We would fold the JE_1 to a TCRETURNdi64cc, and then remove our BB#5
successor. Then BB#5 would be deleted as it had no predecessors, leaving
a dangling "JMP_1 <BB#5>" reference behind to cause assertions later.
This patch checks that both conditional branch destinations are
different before doing the transform. The standard branch folding logic
is able to remove both the JMP_1 and the JE_1, and for my test case we
end up forming a better conditional tail call later.
Fixes PR33980
llvm-svn: 309422
This allows handling of a lot more of the interesting
cases in Blender. Most of the large functions unlikely
to be inlined have this pattern.
This is a special case for what clang emits for OpenCL 3
element vectors. Annoyingly, these are emitted as
<3 x elt>* pointers, but accessed as <4 x elt>* operations.
This also needs to handle cases where a struct containing
a single vector is used.
llvm-svn: 309419
It is better to return arguments directly in registers
if we are making a call rather than introducing expensive
stack usage. In one of sample compile from one of
Blender's many kernel variants, this fires on about
~20 different functions. Future improvements may be to
recognize simple cases where the pointer is indexing a small
array. This also fails when the store to the out argument
is in a separate block from the return, which happens in
a few of the Blender functions. This should also probably
be using MemorySSA which might help with that.
I'm not sure this is correct as a FunctionPass, but
MemoryDependenceAnalysis seems to not work with
a ModulePass.
I'm also not sure where it should run.I think it should
run before DeadArgumentElimination, so maybe either
EP_CGSCCOptimizerLate or EP_ScalarOptimizerLate.
llvm-svn: 309416
Summary:
LazyValueInfo currently computes the constant value of the switch condition through case edges, which allows the constant value to be propagated through the case edges.
But we have seen a case where a zero-extended value of the switch condition is used past case edges for which the constant propagation doesn't occur.
This patch adds a small logic to handle such a case in getEdgeValueLocal().
This is motivated by the Python 2.7 eval loop in PyEval_EvalFrameEx() where the lack of the constant propagation causes longer live ranges and more spill code than necessary.
With this patch, we see that the code size of PyEval_EvalFrameEx() decreases by ~5.4% and a performance test improves by ~4.6%.
Reviewers: wmi, dberlin, sanjoy
Reviewed By: sanjoy
Subscribers: davide, davidxl, llvm-commits
Differential Revision: https://reviews.llvm.org/D34822
llvm-svn: 309415
When using win32 cmd.exe, turn off command echoing at the beginning of
the script (@echo off).
Replace a bash shell script with a python script for the
fail_with_bad_encoding test.
llvm-svn: 309399
We need to pass something to functions for this to work.
It isn't derivable just from the kernarg segment pointer
because the implicit arguments are placed after the
kernel arguments.
Also fixes missing test for the intrinsic.
llvm-svn: 309398
Recommit after workaround the bug PR31652.
Three bugs fixed in previous recommits: The first one is to use CurrentBlock
instead of PREInstr's Parent as param of performScalarPREInsertion because
the Parent of a clone instruction may be uninitialized. The second one is stop
PRE when CurrentBlock to its predecessor is a backedge and an operand of CurInst
is defined inside of CurrentBlock. The same value defined inside of loop in last
iteration can not be regarded as available. The third one is an out-of-bound
array access in a flipped if guard.
Right now scalarpre doesn't have phi-translate support, so it will miss some
simple pre opportunities. Like the following testcase, current scalarpre cannot
recognize the last "a * b" is fully redundent because a and b used by the last
"a * b" expr are both defined by phis.
long a[100], b[100], g1, g2, g3;
__attribute__((pure)) long goo();
void foo(long a, long b, long c, long d) {
g1 = a * b;
if (__builtin_expect(g2 > 3, 0)) {
a = c;
b = d;
g2 = a * b;
}
g3 = a * b; // fully redundant.
}
The patch adds phi-translate support in scalarpre. This is only a temporary
solution before the newpre based on newgvn is available.
Differential Revision: https://reviews.llvm.org/D32252
llvm-svn: 309397
By creating a dummy of this target in LLVMConfig.cmake, projects that can build against out-of-tree LLVM can freely depend on the target without needing to have conditionals for if LLVM is in-tree or out-of-tree.
llvm-svn: 309389
This NFC changeset standardizes the suffixes used for LSE Atomics
instructions.
It changes the existing suffixes - 'b', 'h', 's', 'd' - to the existing
standard 'B', 'H', 'W' and 'X'.
This changeset is the result of the code review discussion for D35319.
Patch by: steleman
Differential Revision: https://reviews.llvm.org/D35927
llvm-svn: 309384
This patch enables choice for accessing thread local
storage pointer (like '-mtp' in gcc).
Differential Revision: https://reviews.llvm.org/D34408
llvm-svn: 309381
The ARM Runtime ABI document (IHI0043) defines the AEABI floating point
helper functions in section 4.1.2 The floating-point helper functions.
The functions listed in this section must always use the base AAPCS calling
convention.
This test generates calls to all the helper functions that llvm supports
and checks that the base AAPCS calling convention has been used. We test
the equivalent of -mfloat-abi=soft, -mfloat-abi=softfp, -mfloat-abi=hardfp
with an FPU that supports single and double precision, and one that only
supports double precision.
Differential Revision: https://reviews.llvm.org/D35904
llvm-svn: 309371
This patch reworks the function that searches constants in Add and Mul SCEV expression
chains so that now it does not visit a node more than once, and also renames this function
for better correspondence between its implementation and semantics.
Differential Revision: https://reviews.llvm.org/D35931
llvm-svn: 309367
This adds support for the CFI pseudo-op return_column. This specifies
the frame table column which contains the return address.
Addresses PR33953!
llvm-svn: 309360
This reverts commit r309080. The patch needs to clear out the
ScalarEvolution::ExitLimits cache in forgetMemoizedResults.
I've replied on the commit thread for the patch with more details.
llvm-svn: 309357
This is some more cleanup in preparation for some actual
functional changes. This splits getOutliningBenefit into
two cost functions: getOutliningCallOverhead and
getOutliningFrameOverhead. These functions return the
number of instructions that would be required to call
a specific function and the number of instructions
that would be required to construct a frame for a
specific funtion. The actual outlining benefit logic
is moved into the outliner, which calls these functions.
The goal of refactoring getOutliningBenefit is to:
- Get us closer to getting rid of the IsTailCall flag
- Further split up "target-specific" things and
"general algorithm" things
llvm-svn: 309356
JumpThreading claims to preserve LVI, but it doesn't preserve
the analyses which LVI holds a reference to (e.g. the Dominator).
In the current pass manager infrastructure, after JT runs, the
PM frees these analyses (including DominatorTree) but preserves
LVI.
CorrelatedValuePropagation runs immediately after and queries
a corrupted domtree, causing weird miscompiles.
This commit disables the preservation of LVI for the time being.
Eventually, we should either move LVI to a proper dependency
tracking mechanism (i.e. an analyses shouldn't hold references
to other analyses and compute them on demand if needed), or
we should teach all the passes preserving LVI to preserve the
analyses LVI depends on.
The new pass manager has a mechanism to invalidate LVI in case
one of the analyses it depends on becomes invalid, so this problem
shouldn't exist (at least not in this immediate form), but handling
of analyses holding references is still a very delicate subject.
Fixes PR33917 (and rustc).
llvm-svn: 309355
This can come up in ThinLTO & wastes space & makes degenerate IR.
As per the added FIXME, ultimately, local imported entities should hang
off the function and that way the imported entity list on the CU can be
tested for emptiness like all the other CU lists.
(function-attached local imported entities are probably also the best
path forward for fixing how imported entities are handled both in
cross-module use (currently, while ThinLTO preserves the imported
entities, they would not get used at the imported inlined location -
only in the abstract origin that appears in the partial CU created by
the import (which isn't emitted under Fission due to cross-CU
limitations there)) and to reduce the number of points where imported
entities are emitted (they're currently emitted into every inlined
instance, concrete instance, and abstract origin - they should only go
in teh abstract origin if there is one, otherwise in the concrete
instance - but this requires lots of delayed handling and wiring up,
same as abstract variables & subprograms))
llvm-svn: 309354
The code assumed that unclobbered/unspilled callee saved registers are
unused in the function. This is not true for callee saved registers that are
also used to pass parameters such as swiftself.
rdar://33401922
llvm-svn: 309350
Summary:
The technique of directly calling subprocess.Popen on a python script
doesn't work on Windows. The executable path of the command must refer
to a valid win32 executable.
Instead, rename all the python scripts masquerading as gtest executables
to have .py extensions, so we can easily detect then and call the python
executable for them. Do this on Linux as well as Windows for
consistency.
The test suite directory names also come out in lower-case on Windows.
We can consider removing that in a later patch. This change just updates
the FileCheck lines to match on Windows.
Fixes PR33933
Reviewers: modocache, mgorny
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D35909
llvm-svn: 309347
Summary: In performance tuning, we see performance benefits when enlarge the maximum num promotion targets to 3. This is safe as soon as we have total percentage threshold properly setup (https://reviews.llvm.org/D35962)
Reviewers: davidxl, tejohnson
Reviewed By: tejohnson
Subscribers: llvm-commits, sanjoy
Differential Revision: https://reviews.llvm.org/D35966
llvm-svn: 309346
