Avoid unnecessary duplication of operand 0 of X86::FpSET_ST0_80. This duplication would
cause one register to remain on the stack at the function return.
llvm-svn: 74534
The register allocator, when it allocates a register to a virtual register defined by an implicit_def, can allocate any physical register without worrying about overlapping live ranges. It should mark all of operands of the said virtual register so later passes will do the right thing.
This is not the best solution. But it should be a lot less fragile to having the scavenger try to track what is defined by implicit_def.
llvm-svn: 74518
an individual exhaustive evaluation reflects only the exit value
implied by an individual exit, which may differ from the actual
exit value of the loop if there are other exits. This fixes PR4477.
llvm-svn: 74447
After much back and forth, I decided to deviate from ARM design and split LDR into 4 instructions (r + imm12, r + imm8, r + r << imm12, constantpool). The advantage of this is 1) it follows the latest ARM technical manual, and 2) makes it easier to reduce the width of the instruction later. The down side is this creates more inconsistency between the two sub-targets. We should split ARM LDR instruction in a similar fashion later. I've added a README entry for this.
llvm-svn: 74420
when one of them can be converted to a trivial icmp and conditional
branch.
This addresses what is essentially a phase ordering problem.
SimplifyCFG knows how to do this transformation, but it doesn't do so
if the primary block has any instructions in it other than an icmp and
a branch. In the given testcase, the block contains other instructions,
however they are loop-invariant and can be hoisted. SimplifyCFG doesn't
have LoopInfo though, so it can't hoist them. And, it's important that
the blocks be merged before LoopRotation, as it doesn't support
multiple-exit loops.
llvm-svn: 74396
inserted to replace that value must dominate all of of the basic
blocks associated with the uses of the value in the PHI, not just
one of them.
llvm-svn: 74376
implementation primarily differs from the former in that the asmprinter
doesn't make a zillion decisions about whether or not something will be
RIP relative or not. Instead, those decisions are made by isel lowering
and propagated through to the asm printer. To achieve this, we:
1. Represent RIP relative addresses by setting the base of the X86 addr
mode to X86::RIP.
2. When ISel Lowering decides that it is safe to use RIP, it lowers to
X86ISD::WrapperRIP. When it is unsafe to use RIP, it lowers to
X86ISD::Wrapper as before.
3. This removes isRIPRel from X86ISelAddressMode, representing it with
a basereg of RIP instead.
4. The addressing mode matching logic in isel is greatly simplified.
5. The asmprinter is greatly simplified, notably the "NotRIPRel" predicate
passed through various printoperand routines is gone now.
6. The various symbol printing routines in asmprinter now no longer infer
when to emit (%rip), they just print the symbol.
I think this is a big improvement over the previous situation. It does have
two small caveats though: 1. I implemented a horrible "no-rip" modifier for
the inline asm "P" constraint modifier. This is a short term hack, there is
a much better, but more involved, solution. 2. I had to xfail an
-aggressive-remat testcase because it isn't handling the use of RIP in the
constant-pool reading instruction. This specific test is easy to fix without
-aggressive-remat, which I intend to do next.
llvm-svn: 74372
test suite. Remove documentation for --with-f2c, which
is no longer supported. Remove information about obtaining
tcl/expect, which ship with Mac OS X by default since
10.4.
llvm-svn: 74271
terminator, instead of after the last phi. This fixes a bug
exposed by ScalarEvolution analyzing more kinds of loops.
This fixes PR4436.
llvm-svn: 74072
trip counts in more cases.
Generalize ScalarEvolution's isLoopGuardedByCond code to recognize
And and Or conditions, splitting the code out into an
isNecessaryCond helper function so that it can evaluate Ands and Ors
recursively, and make SCEVExpander be much more aggressive about
hoisting instructions out of loops.
test/CodeGen/X86/pr3495.ll has an additional instruction now, but
it appears to be due to an arbitrary register allocation difference.
llvm-svn: 74048
generating LLVM IR; it is correct in the code as written
to use 8-byte-aligned operations to copy Key in bar. Formerly
the gcc inliner was run, now it isn't. I don't think it's
possible to preserve this as a pure FE test. Adding -O2 lets
the llvm optimizers get rid of the 8-byte-aligned stores, at least.
llvm-svn: 73981
generated code was apparently doing stores directly into the return value
aggregate; now, it's doing a copy from a compiler-generated static object.
That object is initialized using [4 x i8] which breaks the test. I believe
this change preserves the original point of the test.
Of course it would be better for the code to do stores directly into the
return aggregate, but that is not what happens at -O0; the llvm optimizers
seem to do that on x86 but not on ppc32, possibly because of the explicit
padding (which is unavoidable). I think it must have been being done by
a gcc optimizer pass before.
llvm-svn: 73972
blocks, and also exit blocks with multiple conditions (combined
with (bitwise) ands and ors). It's often infeasible to compute an
exact trip count in such cases, but a useful upper bound can often
be found.
llvm-svn: 73866
a global with that gets printed with the :mem modifier. All operands to lea's
should be handled with the lea32mem operand kind, and this allows the TLS stuff
to do this. There are several better ways to do this, but I went for the minimal
change since I can't really test this (beyond make check).
This also makes the use of EBX explicit in the operand list in the 32-bit,
instead of implicit in the instruction.
llvm-svn: 73834
SCEVUnknowns with identical Instructions to be equal. This allows
it to analze cases such as the attached testcase, where the front-end
has cloned the loop controlling expression. Along with r73805, this
lets IndVarSimplify eliminate all the sign-extend casts in the
loop in the attached testcase.
llvm-svn: 73807
expression in IVUsers, because in the case of a use of a non-linear
addrec outside of a loop, this causes the addrec to be evaluated as
a linear addrec.
llvm-svn: 73774
as if they were multiple uses of the same instruction. This interacts
well with the existing loadpre that j-t does to open up many new jump
threads earlier.
llvm-svn: 73768
while experimenting. I'm reasonably sure this is correct, but please
tell me if these instructions have some strange property which makes this
change unsafe.
llvm-svn: 73746
casted induction variables in cases where the cast
isn't foldable. It ended up being a pessimization in
many cases. This could be fixed, but it would require
a bunch of complicated code in IVUsers' clients. The
advantages of this approach aren't visible enough to
justify it at this time.
llvm-svn: 73706
move loads back past a check that the load address
is valid, see new testcase. The test that went
in with 72661 has exactly this case, except that
the conditional it's moving past is checking
something else; I've settled for changing that
test to reference a global, not a pointer. It
may be possible to scan all the tests you pass and
make sure none of them are checking any component
of the address, but it's not trivial and I'm not
trying to do that here.
llvm-svn: 73632
obscuring what would otherwise be a low-bits mask. Use ComputeMaskedBits
to compute what ShrinkDemandedConstant knew about to reconstruct a
low-bits mask value.
llvm-svn: 73540
TurnCopyIntoImpDef turns a copy into implicit_def and remove the val# defined by it. This causes an scavenger assertion later if the def reaches other blocks. Disable the transformation if the value live interval extends beyond its def block.
llvm-svn: 73478
support for x86, and UMULO/SMULO for many architectures, including PPC
(PR4201), ARM, and Cell. The resulting expansion isn't perfect, but it's
not bad.
llvm-svn: 73477
failures.
To support this, add some utility functions to Type to help support
vector/scalar-independent code. Change ConstantInt::get and
ConstantFP::get to support vector types, and add an overload to
ConstantInt::get that uses a static IntegerType type, for
convenience.
Introduce a new getConstant method for ScalarEvolution, to simplify
common use cases.
llvm-svn: 73431
incomming chain of the RETURN node. The incomming chain must
be the outgoing chain of the CALL node. This causes the
backend to identify tail calls that are not tail calls. This
patch fixes this.
llvm-svn: 73387
- Change register allocation hint to a pair of unsigned integers. The hint type is zero (which means prefer the register specified as second part of the pair) or entirely target dependent.
- Allow targets to specify alternative register allocation orders based on allocation hint.
Part 2.
- Use the register allocation hint system to implement more aggressive load / store multiple formation.
- Aggressively form LDRD / STRD. These are formed *before* register allocation. It has to be done this way to shorten live interval of base and offset registers. e.g.
v1025 = LDR v1024, 0
v1026 = LDR v1024, 0
=>
v1025,v1026 = LDRD v1024, 0
If this transformation isn't done before allocation, v1024 will overlap v1025 which means it more difficult to allocate a register pair.
- Even with the register allocation hint, it may not be possible to get the desired allocation. In that case, the post-allocation load / store multiple pass must fix the ldrd / strd instructions. They can either become ldm / stm instructions or back to a pair of ldr / str instructions.
This is work in progress, not yet enabled.
llvm-svn: 73381
they contain multiplications of constants with add operations.
This helps simplify several kinds of things; in particular it
helps simplify expressions like ((-1 * (%a + %b)) + %a) to %b,
as expressions like this often come up in loop trip count
computations.
llvm-svn: 73361
induction variable when the addrec to be expanded does not require
a wider type. This eliminates the need for IndVarSimplify to
micro-manage SCEV expansions, because SCEVExpander now
automatically expands them in the form that IndVarSimplify considers
to be canonical. (LSR still micro-manages its SCEV expansions,
because it's optimizing for the target, rather than for
other optimizations.)
Also, this uses the new getAnyExtendExpr, which has more clever
expression simplification logic than the IndVarSimplify code it
replaces, and this cleans up some ugly expansions in code such as
the included masked-iv.ll testcase.
llvm-svn: 73294
consecutive addresses togther. This makes it easier for the post-allocation pass
to form ldm / stm.
This is step 1. We are still missing a lot of ldm / stm opportunities because
of register allocation are not done in the desired order. More enhancements
coming.
llvm-svn: 73291
out of sync with regular cc.
The only difference between the tail call cc and the normal
cc was that one parameter register - R9 - was reserved for
calling functions through a function pointer. After time the
tail call cc has gotten out of sync with the regular cc.
We can use R11 which is also caller saved but not used as
parameter register for potential function pointers and
remove the special tail call cc on x86-64.
llvm-svn: 73233
