This patch fixes a clearly-broken function that I absent-mindedly bodged
many months ago.
Over in D85749 I landed the substituteDebugValuesForInst, that creates
substitution records for all the def operands from one debug-labelled
instruction to the new one. Unfortunately it would crash if the two
instructions had different numbers of operands; I tried to fix this in
537f0fbe82 by adding a "max operand" parameter to the method, but then
didn't actually change the loop bound to take account of this. It passed
all the tests because.... well there wasn't any real test coverage of this
method.
This patch fixes up the loop to be bounded by the MaxOperand bound; and
adds test coverage for the x86-fixup-LEAs calls to this method, so that
it's actually tested.
Differential Revision: https://reviews.llvm.org/D105820
Avoid a crash when using instruction referencing if x87 floating point
instructions are used. These instructions are significantly mutated when
they're rewritten from referring to registers, to referring to
floating-point-stack positions. As a result, their operands are re-ordered,
and (InstrRef) LiveDebugValues asserts when it sees a DBG_INSTR_REF
referring to a non-reg non-def register operand.
To fix this, drop the instruction numbers, and thus variable locations.
This patch adds a helper utility do do that.
Dropping the variable locations is sub-optimal, but applying DBG_VALUEs to
the $fp0 and similar registers is dropped on emission too. It seems we've
never done well at describing variables that live in x87 registers, at all.
Differential Revision: https://reviews.llvm.org/D105657
This patch adds the forward scan for finding redundant DBG_VALUEs.
This analysis aims to remove redundant DBG_VALUEs by going forward
in the basic block by considering the first DBG_VALUE as a valid
until its first (location) operand is not clobbered/modified.
For example:
(1) DBG_VALUE $edi, !"var1", ...
(2) <block of code that does affect $edi>
(3) DBG_VALUE $edi, !"var1", ...
...
in this case, we can remove (3).
Differential Revision: https://reviews.llvm.org/D105280
This new MIR pass removes redundant DBG_VALUEs.
After the register allocator is done, more precisely, after
the Virtual Register Rewriter, we end up having duplicated
DBG_VALUEs, since some virtual registers are being rewritten
into the same physical register as some of existing DBG_VALUEs.
Each DBG_VALUE should indicate (at least before the LiveDebugValues)
variables assignment, but it is being clobbered for function
parameters during the SelectionDAG since it generates new DBG_VALUEs
after COPY instructions, even though the parameter has no assignment.
For example, if we had a DBG_VALUE $regX as an entry debug value
representing the parameter, and a COPY and after the COPY,
DBG_VALUE $virt_reg, and after the virtregrewrite the $virt_reg gets
rewritten into $regX, we'd end up having redundant DBG_VALUE.
This breaks the definition of the DBG_VALUE since some analysis passes
might be built on top of that premise..., and this patch tries to fix
the MIR with the respect to that.
This first patch performs bacward scan, by trying to detect a sequence of
consecutive DBG_VALUEs, and to remove all DBG_VALUEs describing one
variable but the last one:
For example:
(1) DBG_VALUE $edi, !"var1", ...
(2) DBG_VALUE $esi, !"var2", ...
(3) DBG_VALUE $edi, !"var1", ...
...
in this case, we can remove (1).
By combining the forward scan that will be introduced in the next patch
(from this stack), by inspecting the statistics, the RemoveRedundantDebugValues
removes 15032 instructions by using gdb-7.11 as a testbed.
Differential Revision: https://reviews.llvm.org/D105279
LLVM provides target hooks to recognise stack spill and restore
instructions, such as isLoadFromStackSlot, and it also provides post frame
elimination versions such as isLoadFromStackSlotPostFE. These are supposed
to return the store-source and load-destination registers; unfortunately on
X86, the PostFE recognisers just return "1", apparently to signify "yes
it's a spill/load". This patch alters the hooks to correctly return the
store-source and load-destination registers:
This is really useful for debug-info as we it helps follow variable values
as they move on/off the stack. There should be no codegen changes: the only
other users of these PostFE target hooks are MachineInstr::getRestoreSize
and MachineInstr::getSpillSize, which don't attempt to interpret the
returned register location.
While we're here, delete the (InstrRef) LiveDebugValues heuristic that
tries to find the spill source register by looking for a killed reg -- we
should be able to rely on the target hooks for that. This involves
temporarily turning off a n InstrRef LivedDebugValues test on aarch64
(patch to re-enable it is in D104521).
Differential Revision: https://reviews.llvm.org/D105428
This is a cleanup patch -- we're now able to support all flavours of
variable location in instruction referencing mode. This patch updates
various tests for debug instructions to be broader: numerous code paths
try to ignore debug isntructions, and they now have to ignore the
additional DBG_PHI and DBG_INSTR_REFs that we can generate.
A small amount of rework happens for LiveDebugVariables: as we don't need
to track live intervals through regalloc any more, we can get away with
unlinking debug instructions before regalloc, then re-inserting them after.
Note that this isn't (yet) true of DBG_VALUE_LISTs, they still have to go
through live interval tracking.
In SelectionDAG, add a helper lambda that emits half-formed DBG_INSTR_REFs
for arguments in instr-ref mode, DBG_VALUE otherwise. This is one of the
final locations where DBG_VALUEs are emitted for vreg arguments.
X86InstrInfo now un-sets the debug instr number on SUB instructions that
get mutated into CMP instructions. As the instruction no longer computes a
subtraction, we can't use it for variable locations.
Differential Revision: https://reviews.llvm.org/D88898
Added in 47c3fe2a22cf, we sometimes need to describe a variable value
substitution with a subregister qualifier, to say that "the value is the
lower 32 bits of this 64 bit register def" for example. That then needs
support during LiveDebugValues to interpret the subregister qualifiers,
which is what this patch adds.
Whenever we encounter a DBG_INSTR_REF and find its value by using a
substitution, collect any subregister qualifiers seen. Then, accumulate the
effects of the qualifiers to work out what offset and what size should be
extracted from the defined register. Finally, for the target ValueIDNum,
extract whatever subregister is in the correct position
Currently, describing a subregister field of a larger value that has been
spilt to the stack, is unimplemented.
Differential Revision: https://reviews.llvm.org/D88894
Very late in compilation, backends like X86 will perform optimisations like
this:
$cx = MOV16rm $rax, ...
->
$rcx = MOV64rm $rax, ...
Widening the load from 16 bits to 64 bits. SEeing how the lower 16 bits
remain the same, this doesn't affect execution. However, any debug
instruction reference to the defined operand now refers to a 64 bit value,
nto a 16 bit one, which might be unexpected. Elsewhere in codegen, there's
often this pattern:
CALL64pcrel32 @foo, implicit-def $rax
%0:gr64 = COPY $rax
%1:gr32 = COPY %0.sub_32bit
Where we want to refer to the definition of $eax by the call, but don't
want to refer the copies (they don't define values in the way
LiveDebugValues sees it). To solve this, add a subregister field to the
existing "substitutions" facility, so that we can describe a field within
a larger value definition. I would imagine that this would be used most
often when a value is widened, and we need to refer to the original,
narrower definition.
Differential Revision: https://reviews.llvm.org/D88891
This patch adds support to the instruction-referencing LiveDebugValues
implementation for emitting entry values. The instruction referencing
implementations tracking by value rather than location means that we can
get around two of the issues with VarLocs. DBG_VALUE instructions that
re-assign the same value to a variable are no longer a problem, because we
can "see through" to the value being assigned. We also don't need to do
anything special during the dataflow stages: the "variable value problem"
doesn't need to know whether a value is available most of the time, and the
times it deoes need to know are always when entry values need to be
terminated.
The patch modifies the "TransferTracker" class, adding methods to identify
when a variable ias an entry value candidate, and when a machine value is
an entry value. recoverAsEntryValue tests these two things and emits an
entry-value expression if they're true. It's used when we clobber or
otherwise lose a value and can't find a replacement location for the value
it contained.
Differential Revision: https://reviews.llvm.org/D88406
This will currently accept the old number of bytes syntax, and convert
it to a scalar. This should be removed in the near future (I think I
converted all of the tests already, but likely missed a few).
Not sure what the exact syntax and policy should be. We can continue
printing the number of bytes for non-generic instructions to avoid
test churn and only allow non-scalar types for generic instructions.
This will currently print the LLT in parentheses, but accept parsing
the existing integers and implicitly converting to scalar. The
parentheses are a bit ugly, but the parser logic seems unable to deal
without either parentheses or some keyword to indicate the start of a
type.
In various circumstances, when we clobber a register there may be
alternative locations that the value is live in. The classic example would
be a value loaded from the stack, and then clobbered: the value is still
available on the stack. InstrRefBasedLDV was coping with this at block
starts where it's forced to pick a location, however it wasn't searching
for alternative locations when values were clobbered.
This patch notifies the "Transfer Tracker" object when clobbers occur, and
it's able to find alternatives and issue DBG_VALUEs for that location. See:
the added test.
Differential Revision: https://reviews.llvm.org/D88405
This patch reads machine value numbers from DBG_PHI instructions (marking
where SSA PHIs used to be), and matches them up with DBG_INSTR_REF
instructions that refer to them. Essentially they are two separate parts of
a DBG_VALUE: the place to read the value (register and program position),
and where the variable is assigned that value.
Sometimes these DBG_PHIs can be duplicated, usually by tail duplication.
This corresponds to the SSA structure of the program being destroyed, and
the original PHI being split. When this happens: run LLVMs standard
SSAUpdater utility, to work out what values should appear in which blocks.
The majority of this patch is boilerplate to make use of SSAUpdater.
If there are any additional PHIs on the path between multiple DBG_PHIs and
their using DBG_INSTR_REF, their existance is validated, just in case a
value gets clobbered along the way (see dbg-phis-with-loops.mir for
several examples).
Differential Revision: https://reviews.llvm.org/D86814
Fixes a minor bug when trying to iterate through use operands when
updating debug use operands.
Extends a test to include above.
Differential Revision: https://reviews.llvm.org/D104576
Was reverted in 0507fc2ffc9, in phi-coalesce-subreg.mir I'd explicitly named
some passes to run instead of specifying a range. As a result some
two-address-instrs weren't correctly rewritten and the verifier got upset.
Original commit message:
[DebugInstrRef][2/3] Track PHI values through register coalescing
In the instruction referencing variable location model, we store variable
locations that point at PHIs in MachineFunction during register allocation.
Unfortunately, register coalescing can substantially change the locations
of registers, and so that PHI-variable-location side table needs
maintenence during the pass.
This patch builds an index from the side table, and whenever a vreg gets
coalesced into another vreg, update the index to record the new vreg that
the PHI happens in. It also accepts a limited range of subregister
coalescing, for example merging a subregister into a larger class.
Differential Revision: https://reviews.llvm.org/D86813
In the instruction referencing variable location model, we store variable
locations that point at PHIs in MachineFunction during register
allocation. Unfortunately, register coalescing can substantially change
the locations of registers, and so that PHI-variable-location side table
needs maintenence during the pass.
This patch builds an index from the side table, and whenever a vreg gets
coalesced into another vreg, update the index to record the new vreg that
the PHI happens in. It also accepts a limited range of subregister
coalescing, for example merging a subregister into a larger class.
Differential Revision: https://reviews.llvm.org/D86813
The D35953, D62650 and D73691 introduced trimming of variables locations
in LiveDebugVariables pass, since there are some cases where after
the virtregrewrite we have exploded number of DBG_VALUEs created for some
inlined variables. As it looks, all problematic cases were regarding
inlined variables, so it seems reasonable to stop trimming the location
ranges for non-inlined variables.
It has very good impact on the llvm-locstats report.
Differential Revision: https://reviews.llvm.org/D102917
This patch introduces "DBG_PHI" instructions, a marker of where a PHI
instruction used to be, before PHI elimination. Under the instruction
referencing model, we want to know where every value in the function is
defined -- and a PHI, even if implicit, is such a place.
Just like instruction numbers, we can use this to identify a value to be
used as a variable value, but we don't need to know what instruction
defines that value, for example:
bb1:
DBG_PHI $rax, 1
[... more insts ... ]
bb2:
DBG_INSTR_REF 1, 0, !1234, !DIExpression()
This specifies that on entry to bb1, whatever value is in $rax is known
as value number one -- and the later DBG_INSTR_REF marks the position
where variable !1234 should take on value number one.
PHI locations are stored in MachineFunction for the duration of the
regalloc phase in the DebugPHIPositions map. The map is populated by
PHIElimination, and then flushed back into the instruction stream by
virtregrewriter. A small amount of maintenence is needed in
LiveDebugVariables to account for registers being split, but only for
individual positions, not for entire ranges of blocks.
Differential Revision: https://reviews.llvm.org/D86812
This patch adds support for DBG_VALUE_LIST in the LiveDebugVariables pass. The
changes are mostly in computeIntervals, extendDef, and addDefsFromCopies; when
extending the def of a DBG_VALUE_LIST the live ranges of every used register
must be considered, and when such a def is killed by more than one of its used
registers being killed at the same time it is necessary to find valid copies of
all of those registers to create a new def with.
The DebugVariableValue class has also been changed to reference multiple
location numbers instead of just one. This has been accomplished by using a
C-style array with a unique_ptr and an array length packed into 6 bits, to
minimize the size of the class (which must be kept low to be used with
IntervalMap). This may not be the most efficient solution possible, and should
be looked at if performance issues arise.
Differential Revision: https://reviews.llvm.org/D83895
This patch implements DBG_VALUE_LIST handling to the LiveDebugValues pass. This
is a substantial change, and makes a few fundamental changes to the existing
logic.
We still use the basic model of a VarLocMap that is indexed by a LocIndex, with
a VarLocSet (a CoalescingBitVector underneath) giving us efficient lookups of
existing variable locations for a given location type. The main change is that
the VarLocMap may contain a given VarLoc multiple times (once for each unique
location operand), so that a VarLoc can be looked up from any of the registers
that it uses. This means that each VarLoc has multiple corresponding LocIndexes;
to allow us to iterate through the set of VarLocs (previously we would iterate
through the VarLocSet), we now also maintain a single entry in the VarLocMap
that contains every VarLoc exactly once.
The VarLoc class itself is also changed; this change is much simpler,
refactoring out location-specific members into a MachineLocation class and
adding a vector of these locations.
Differential Revision: https://reviews.llvm.org/D83890
Separate the LoZ ELF calling convention in tablegen.
This will make it easier to add the z/OS ABI in future patches.
Reviewed By: uweigand
Differential Revision: https://reviews.llvm.org/D96867
This patch enables AsmPrinter support for complex expression with
entry values. It shouldn't AsmPrinter's call whether these are safe or
not but the pass who introduces the DW_OP_LLVM_entry_value. This patch
on its own has no effect on clang.
Differential Revision: https://reviews.llvm.org/D96559
This moves SinkIntoLoop from MachineLICM to MachineSink. The motivation for
this work is that hoisting is a canonicalisation transformation, but we do not
really have a good story to sink instructions back if that is better, e.g. to
reduce live-ranges, register pressure and spilling. This has been discussed a
few times on the list, the latest thread is:
https://lists.llvm.org/pipermail/llvm-dev/2020-December/147184.html
There it was pointed out that we have the LoopSink IR pass, but that works on
IR, lacks register pressure informatiom, and is focused on profile guided
optimisations, and then we have MachineLICM and MachineSink that both perform
sinking. MachineLICM is more about hoisting and CSE'ing of hoisted
instructions. It also contained a very incomplete and disabled-by-default
SinkIntoLoop feature, which we now move to MachineSink.
Getting loop-sinking to do something useful is going to be at least a 3-step
approach:
1) This is just moving the code and is almost a NFC, but contains a bug fix.
This uses helper function `isLoopInvariant` that was factored out in D94082 and
added to MachineLoop.
2) A first functional change to make loop-sink a little bit less restrictive,
which it really is at the moment, is the change in D94308. This lets it do
more (alias) analysis using functions in MachineSink, making it a bit more
powerful. Nothing changes much: still off by default. But it shows that
MachineSink is a better home for this, and it starts using its functionality
like `hasStoreBetween`, and in the next step we can use `isProfitableToSinkTo`.
3) This is the going to be he interesting step: decision making when and how
many instructions to sink. This will be driven by the register pressure, and
deciding if reducing live-ranges and loop sinking will help in better
performance.
4) Once we are happy with 3), this should be enabled by default, that should be
the end goal of this exercise.
Differential Revision: https://reviews.llvm.org/D93694
In MipsDelaySlotFiller, when replacing old call-branch with
the compact branch instruction, an assertion is caused by erasing
the old call with unhandled CSInfo.
The problem was reported in PR48695.
This patch fixes it, by moving call site info from the old call
instruction to its replace.
Patch by Nikola Tesic
Differential revision: https://reviews.llvm.org/D94685
Deciding where to place debugging instructions when normal instructions
sink between blocks is difficult -- see PR44117. Dealing with this with
instruction-referencing variable locations is simple: we just tolerate
DBG_INSTR_REFs referring to values that haven't been computed yet. This
patch adds support into InstrRefBasedLDV to record when a variable value
appears in the middle of a block, and should have a DBG_VALUE added when it
appears (a debug use before def).
While described simply, this relies heavily on the value-propagation
algorithm in InstrRefBasedLDV. The implementation doesn't attempt to verify
the location of a value unless something non-trivial occurs to merge
variable values in vlocJoin. This means that a variable with a value that
has no location can retain it across all control flow (including loops).
It's only when another debug instruction specifies a different variable
value that we have to check, and find there's no location.
This property means that if a machine value is defined in a block dominated
by a DBG_INSTR_REF that refers to it, all the successor blocks can
automatically find a location for that value (if it's not clobbered). Thus
in a sense, InstrRefBasedLDV is already supporting and implementing
use-before-defs. This patch allows us to specify a variable location in the
block where it's defined.
When loading live-in variable locations, TransferTracker currently discards
those where it can't find a location for the variable value. However, we
can tell from the machine value number whether the value is defined in this
block. If it is, add it to a set of use-before-def records. Then, once the
relevant instruction has been processed, emit a DBG_VALUE immediately after
it.
Differential Revision: https://reviews.llvm.org/D85775
Handle DBG_INSTR_REF instructions in LiveDebugValues, to determine and
propagate variable locations. The logic is fairly straight forwards:
Collect a map of debug-instruction-number to the machine value numbers
generated in the first walk through the function. When building the
variable value transfer function and we see a DBG_INSTR_REF, look up the
instruction it refers to, and pick the machine value number it generates,
That's it; the rest of LiveDebugValues continues as normal.
Awkwardly, there are two kinds of instruction numbering happening here: the
offset into the block (which is how machine value numbers are determined),
and the numbers that we label instructions with when generating
DBG_INSTR_REFs.
I've also restructured the TransferTracker redefVar code a little, to
separate some DBG_VALUE specific operations into its own method. The
changes around redefVar should be largely NFC, while allowing
DBG_INSTR_REFs to specify a value number rather than just a location.
Differential Revision: https://reviews.llvm.org/D85771
When switching the register debug operands to $noreg in
setupDebugValueUndef() also clear the sub-register indices for virtual
registers. This is done when marking DBG_VALUEs undef in other cases,
e.g. in LiveDebugVariables. I have not found any cases where leaving the
sub-register index causes any issues, and the indices would eventually
get dropped when LiveDebugVariables reinserted the undef DBG_VALUEs
after register scheduling, but if nothing else it looked a bit weird in
printouts to have sub-register indices on $noreg, and I don't think the
sub-register index holds any meaningful information at that point.
I have not been able to find any source-level reproducer for this with
an upstream target, so I have just added an instrumented machine-sink
test.
Reviewed By: djtodoro, jmorse
Differential Revision: https://reviews.llvm.org/D89941
Both FastRegAlloc and LiveDebugVariables/greedy need to cope with
DBG_INSTR_REFs. None of them actually need to take any action, other than
passing DBG_INSTR_REFs through: variable location information doesn't refer
to any registers at this stage.
LiveDebugVariables stashes the instruction information in a tuple, then
re-creates it later. This is only necessary as the register allocator
doesn't expect to see any debug instructions while it's working. No
equivalence classes or interval splitting is required at all!
No changes are needed for the fast register allocator, as it just ignores
debug instructions. The test added checks that both of them preserve
DBG_INSTR_REFs.
This also expands ScheduleDAGInstrs.cpp to treat DBG_INSTR_REFs the same as
DBG_VALUEs when rescheduling instructions around. The current movement of
DBG_VALUEs around is less than ideal, but it's not a regression to make
DBG_INSTR_REFs subject to the same movement.
Differential Revision: https://reviews.llvm.org/D85757
The instruction referencing work currently only works on X86, and all the
tests for it will be X86 based for the time being. Configure the whole
directory to be X86-only, seeing how I keep on landing tests that don't
have the correct REQUIRES lines.
This patch touches two optimizations, TwoAddressInstruction and X86's
FixupLEAs pass, both of which optimize by re-creating instructions. For
LEAs, various bits of arithmetic are better represented as LEAs on X86,
while TwoAddressInstruction sometimes converts instrs into three address
instructions if it's profitable.
For debug instruction referencing, both of these require substitutions to
be created -- the old instruction number must be pointed to the new
instruction number, as illustrated in the added test. If this isn't done,
any variable locations based on the optimized instruction are
conservatively dropped.
Differential Revision: https://reviews.llvm.org/D85756
Add a table recording "substitutions" between pairs of <instruction,
operand> numbers, from old pairs to new pairs. Post-isel optimizations are
able to record the outcome of an optimization in this way. For example, if
there were a divide instruction that generated the quotient and remainder,
and it were replaced by one that only generated the quotient:
$rax, $rcx = DIV-AND-REMAINDER $rdx, $rsi, debug-instr-num 1
DBG_INSTR_REF 1, 0
DBG_INSTR_REF 1, 1
Became:
$rax = DIV $rdx, $rsi, debug-instr-num 2
DBG_INSTR_REF 1, 0
DBG_INSTR_REF 1, 1
We could enter a substitution from <1, 0> to <2, 0>, and no substitution
for <1, 1> as it's no longer generated.
This approach means that if an instruction or value is deleted once we've
left SSA form, all variables that used the value implicitly become
"optimized out", something that isn't true of the current DBG_VALUE
approach.
Differential Revision: https://reviews.llvm.org/D85749
This patch defines the MIR format for debug instruction references: it's an
integer trailing an instruction, marked out by "debug-instr-number", much
like how "debug-location" identifies the DebugLoc metadata of an
instruction. The instruction number is stored directly in a MachineInstr.
Actually referring to an instruction comes in a later patch, but is done
using one of these instruction numbers.
I've added a round-trip test and two verifier checks: that we don't label
meta-instructions as generating values, and that there are no duplicates.
Differential Revision: https://reviews.llvm.org/D85746
This was landed but reverted in 5b9c2b1bea7 due to asan picking up a memory
leak. This is fixed in the change to InstrRefBasedImpl.cpp. Original
commit message follows:
[LiveDebugValues][NFC] Add instr-ref tests, adapt old tests
This patch adds a few tests in DebugInfo/MIR/InstrRef/ of interesting
behaviour that the instruction referencing implementation of
LiveDebugValues has. Mostly, these tests exist to ensure that if you
give the "-experimental-debug-variable-locations" command line switch,
the right implementation runs; and to ensure it behaves the same way as
the VarLoc LiveDebugValues implementation.
I've also touched roughly 30 other tests, purely to make the tests less
rigid about what output to accept. DBG_VALUE instructions are usually
printed with a trailing !debug-location indicating its scope:
!debug-location !1234
However InstrRefBasedLDV produces new DebugLoc instances on the fly,
meaning there sometimes isn't a numbered node when they're printed,
making the output:
!debug-location !DILocation(line: 0, blah blah)
Which causes a ton of these tests to fail. This patch removes checks for
that final part of each DBG_VALUE instruction. None of them appear to
be actually checking the scope is correct, just that it's present, so
I don't believe there's any loss in coverage here.
Differential Revision: https://reviews.llvm.org/D83054
This reverts commit b9d977b0ca60c54f11615ca9d144c9f08b29fd85.
This cutoff is no longer required. The commit 34ffa7fc501 (D86153) introduces a
performance improvement which was tested against the motivating case for this
patch.
Discussed in differential revision: https://reviews.llvm.org/D86153
With this patch we're now accounting for two more cases which should be
considered 'valid throughout': First, where RangeEnd is ScopeEnd. Second, where
RangeEnd comes before ScopeEnd when including meta instructions, but are both
preceded by the same non-meta instruction.
CTMark shows a geomean binary size reduction of 1.5% for RelWithDebInfo builds.
`llvm-locstats` (using D85636) shows a very small variable location coverage
change in 2 of 10 binaries, but it is in the order of 10s of bytes which lines
up with my expectations.
I've added a test which checks both of these new cases. The first check in the
test isn't strictly necessary for this patch. But I'm not sure that it is
explicitly tested anywhere else, and is useful for the final patch in the
series.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D86151
Fix the ARM backend's analyzeBranch so it doesn't ignore predicated
return instructions, and make the MachineVerifier rule more strict.
Differential Revision: https://reviews.llvm.org/D40061
This patch adds a few tests in DebugInfo/MIR/InstrRef/ of interesting
behaviour that the instruction referencing implementation of
LiveDebugValues has. Mostly, these tests exist to ensure that if you
give the "-experimental-debug-variable-locations" command line switch,
the right implementation runs; and to ensure it behaves the same way as
the VarLoc LiveDebugValues implementation.
I've also touched roughly 30 other tests, purely to make the tests less
rigid about what output to accept. DBG_VALUE instructions are usually
printed with a trailing !debug-location indicating its scope:
!debug-location !1234
However InstrRefBasedLDV produces new DebugLoc instances on the fly,
meaning there sometimes isn't a numbered node when they're printed,
making the output:
!debug-location !DILocation(line: 0, blah blah)
Which causes a ton of these tests to fail. This patch removes checks for
that final part of each DBG_VALUE instruction. None of them appear to
be actually checking the scope is correct, just that it's present, so
I don't believe there's any loss in coverage here.
Differential Revision: https://reviews.llvm.org/D83054
Emit DWARF 5 call-site symbols even though DWARF 4 is set,
only in the case of LLDB tuning.
This patch addresses PR46643.
Differential Revision: https://reviews.llvm.org/D83463
SONY debugger does not prefer debug entry values feature, so
the plan is to avoid production of the entry values
by default when the tuning is SCE debugger.
The feature still can be enabled with the -debug-entry-values
option for the testing/development purposes.
This patch addresses PR46643.
Differential Revision: https://reviews.llvm.org/D83462
Occasionally we see absolutely massive basic blocks, typically in global
constructors that are vulnerable to heavy inlining. When these blocks are
dense with DBG_VALUE instructions, we can hit near quadratic complexity in
DwarfDebug's validThroughout function. The problem is caused by:
* validThroughout having to step through all instructions in the block to
examine their lexical scope,
* and a high proportion of instructions in that block being DBG_VALUEs
for a unique variable fragment,
Leading to us stepping through every instruction in the block, for (nearly)
each instruction in the block.
By adding this guard, we force variables in large blocks to use a location
list rather than a single-location expression, as shown in the added test.
This shouldn't change the meaning of the output DWARF at all: instead we
use a less efficient DWARF encoding to avoid a poor-performance code path.
Differential Revision: https://reviews.llvm.org/D83236
When describing parameter value loaded by a COPY instruction, consider
case where needed Reg value is a sub- or super- register of the COPY
instruction's destination register. Without this patch, compile process
will crash with the assertion "TargetInstrInfo::describeLoadedValue
can't describe super- or sub-regs for copy instructions".
Patch by Nikola Tesic
Differential revision: https://reviews.llvm.org/D82000
Describe parameter's value loaded by MIPS ADDiu instruction.
When parameter's value is loaded into a register by mips ADDiu/DADDiu
instruction, it could be described correctly and emitted as
DW_AT_GNU_call_site_value.
Patch by Nikola Tesic
Differential revision: https://reviews.llvm.org/D78108
This adds call site info support for call instructions with delay slot.
Search for instructions inside call delay slot, which load value
into parameter forwarding registers.
Return address of the call points to instruction after call delay slot,
which is not the one, immediately after the call instruction.
Patch by Nikola Tesic
Differential revision: https://reviews.llvm.org/D78107
Summary:
Instead of iterating over all VarLoc IDs in removeEntryValue(), just
iterate over the interval reserved for entry value VarLocs. This changes
the iteration order, hence the test update -- otherwise this is NFC.
This appears to give an ~8.5x wall time speed-up for LiveDebugValues when
compiling sqlite3.c 3.30.1 with a Release clang (on my machine):
```
---User Time--- --System Time-- --User+System-- ---Wall Time--- --- Name ---
Before: 2.5402 ( 18.8%) 0.0050 ( 0.4%) 2.5452 ( 17.3%) 2.5452 ( 17.3%) Live DEBUG_VALUE analysis
After: 0.2364 ( 2.1%) 0.0034 ( 0.3%) 0.2399 ( 2.0%) 0.2398 ( 2.0%) Live DEBUG_VALUE analysis
```
The change in removeEntryValue() is the only one that appears to affect
wall time, but for consistency (and to resolve a pending TODO), I made
the analogous changes for iterating over SpillLocKind VarLocs.
Reviewers: nikic, aprantl, jmorse, djtodoro
Subscribers: hiraditya, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80684
