A lit feature guards tests for the lit timeout functionality because on
most system it depends on the availability of the psutil Python module.
However, that feature is defined based on the ability of the testing lit
to cancel test, which does not necessarily apply to the ability of the
tested lit.
In particular, RUN commands have a cleared PYTHONPATH and user site
packages are disabled. In the case where psutil is found by the testing
lit from one of those two source of python path, the tested lit would
not be able to find it, causing timeout tests to fail.
This commit fixes the issue by testing the ability to cancel tests in
the RUN command environment.
Reviewed By: yln
Differential Revision: https://reviews.llvm.org/D99728
when the predicate used by last{a,b} specifies a known vector length.
For example:
aarch64_sve_lasta(VL1, D) -> extractelement(D, #1)
aarch64_sve_lastb(VL1, D) -> extractelement(D, #0)
Co-authored-by: Paul Walker <paul.walker@arm.com>
Differential Revision: https://reviews.llvm.org/D100476
Re-land the patch with a fix of clang test.
Cost of spill location is computed basing on relative branch frequency
where corresponding spill/reload/copy are located.
While the number itself is highly depends on incoming IR,
the total cost can be used when do some changes in RA.
Revert "Revert "[GreedyRA ORE] Add Cost of spill locations into remark""
This reverts commit 680f3d6de79f7dd75ee0cda256a541d18e504a22.
This patch adds an additional emergency spill slot to RVV code. This is
required as RVV stack offsets may require an additional register to compute.
This patch includes an optimization by @HsiangKai <kai.wang@sifive.com>
to reduce the number of registers required for the computation of stack
offsets from 3 to 2. Otherwise we'd need two additional emergency spill
slots.
Reviewed By: HsiangKai
Differential Revision: https://reviews.llvm.org/D100574
Rather than maintaining two separate values, a `float` for the per-lane
cost and a Width for the VF, maintain a single VectorizationFactor which
comprises the two and also removes the need for converting an integer value
to float.
This simplifies the query when asking if one VF is more profitable than
another when we want to extend this for scalable vectors (which may
require additional options to determine if e.g. a scalable VF of the
some cost, is more profitable than a fixed VF of the same cost).
The patch isn't entirely NFC because it also fixes an issue in
selectEpilogueVectorizationFactor, where the cost passed to ProfitableVFs
no longer truncates the floating-point cost from `float` to `unsigned` to
then perform the calculation on the truncated cost. It now does
a cost comparison with the correct precision.
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D100121
This patch exploits mtvsrdd instruction (available in ISA3.0+) to save
two callee-saved GPR registers into a single VSR, making it more
efficient.
Reviewed By: jsji, nemanjai
Differential Revision: https://reviews.llvm.org/D62565
This patch changes ISD::isBuildVectorAllZeros to
ISD::isConstantSplatVectorAllZeros which handles zero sclar vector.
TestPlan: check-llvm
Differential Revision: https://reviews.llvm.org/D100813
Don't shrink VOP3 instructions if there are any uses of a carry-out
operand, because the shrunken form of the instruction would write the
carry-out to vcc instead of to a virtual register.
Differential Revision: https://reviews.llvm.org/D100760
This patch is related to https://reviews.llvm.org/D100032 which define
some illegal types or operations for x86_amx. There are no arguments,
arrays, pointers, vectors or constants of x86_amx.
Reviewed By: pengfei
Differential Revision: https://reviews.llvm.org/D100472
Previously we would use the type of the pointee to determine what to
cast the result of constant folding a load. To aid with opaque pointer
types, we should explicitly pass the type of the load rather than
looking at pointee types.
ConstantFoldLoadThroughBitcast() converts the const prop'd value to the
proper load type (e.g. [1 x i32] -> i32). Instead of calling this in
every intermediate step like bitcasts, we only call this when we
actually see the global initializer value.
In some existing uses of this API, we don't know the exact type we're
loading from immediately (e.g. first we visit a bitcast, then we visit
the load using the bitcast). In those cases we have to manually call
ConstantFoldLoadThroughBitcast() when simplifying the load to make sure
that we cast to the proper type.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D100718
This patch is the last one in backend to support fp128 type in
pre-POWER9 subtargets with VSX, removing temporary option and updating
remaining tests.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D92374
This patch relaxes the requirement that the STEP_VECTOR step constant
must be of a type at least as large as the vector element type. This
does not permit its use on targets which have legal vector element types
larger than the largest legal scalar type, such as i64 vectors on RV32.
As such, the requirement has been loosened so that the step operand must
be any scalar type so long as the constant immediate is non-negative and
the value fits inside the vector element type.
This limits combining optimizations in certain circumstances but in
practice it's unlikely to be a hindrance.
Reviewed By: paulwalker-arm
Differential Revision: https://reviews.llvm.org/D100660
This patch adds basic CSKY branch instructions and symbol address series instructions.
Those two kinds of instruction have relationship between each other, and it involves much work about Fixups.
For now, basic instructions are enabled except for disassembler support.
We would support to generate basic codegen asm firstly and delay disassembler work later.
Differential Revision: https://reviews.llvm.org/D95029
This patch adds basic CSKY integer instructions except for branch series such as bsr, br.
It mainly includes basic ALU, load & store, compare and data move instructions.
Branch series instructions need handle complex symbol operand as following patch later.
Differential Revision: https://reviews.llvm.org/D94007
This basic parser will handle basic instructions with register or immediate operands.
With the addition of CSKYInstPrinter, we can now make use of lit tests.
Differential Revision: https://reviews.llvm.org/D93798
It's necessary to calculate correct instruction size because
PseudoVRELOAD and PseudoSPILL will be expanded into multiple
instructions.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D100702
This reverts commit 328377307ad2da961b3be0f2bbf1814a6f1f4ed3.
This commit causes buildbot failures due to some clang tests are not updated.
Temporary revert to fix clang tests.
Beginners might not aware of this variable and wanted to try a new experimental target.
Although this variable mention in Writing a Backend Documentation. But it becomes easy to search when listed in cmake.rst doc where most variables are listed.
Reviewed By: myhsu
Differential Revision: https://reviews.llvm.org/D100729
Cost of spill location is computed basing on relative branch frequency
where corresponding spill/reload/copy are located.
While the number itself is highly depends on incoming IR,
the total cost can be used when do some changes in RA.
Reviewers: reames, MatzeB, anemet, thegameg
Reviewed By: reames
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D100020
Pseudo probe are currently given a slot index like other regular instructions. This affects register pressure and lifetime weight computation because of enlarged lifetime length with pseudo probe instructions. As a consequence, program could get different code generated w/ and w/o pseudo probes. I'm closing the gap by excluding pseudo probes from stack index and downstream register allocation related passes.
Reviewed By: wmi
Differential Revision: https://reviews.llvm.org/D100334
Flipping the default value of SkipPseudoOp to true for those MIR APIs to favor maximum performance. Note that certain spots like branch folding and MIR if-conversion is are disabled for better counts quality. For these two optimizations, this is a no-diff change.
The counts quality with SPEC2017 before/after this change is unchanged.
Reviewed By: wmi
Differential Revision: https://reviews.llvm.org/D100332
This patch improves https://reviews.llvm.org/D76971 (Deduce attributes for aligned_alloc in InstCombine) and implements "TODO" item mentioned in the review of that patch.
> The function aligned_alloc() is the same as memalign(), except for the added restriction that size should be a multiple of alignment.
Currently, we simply bail out if we see a non-constant size - change that.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D100785
M68kDisassembler should put M68kDesc as its direct library dependency
since it uses logics releated to code beads Otherwise the build will
fail when building LLVM libraries as shared objects (building LLVM
libraries statically won't have this problem though)
In an env that reuses compiler instances for multiple compilations, this
omission results in non-deterministic assembly output (names of the
auto-generated labels) if the order or full set of Modules compiled
varies.
Differential Revision: https://reviews.llvm.org/D100797
This also includes PC-relative addresses since they are still
referenced as absolute addresses in assembly and converted to
relative addresses by the assembler.
This changes, for example:
- `bra #-2` -> `bra $100`
- `jsr #16` -> `jsr $10`
Differential Revision: https://reviews.llvm.org/D100697
The unnamedaddr property of a function is lost when using
`-fwhole-program-vtables` and thinlto which causes size increase under linker's
safe icf mode.
The size increase of chrome on Linux when switching from all icf to safe icf
drops from 5 MB to 3 MB after this change, and from 6 MB to 4 MB on Windows.
There is a repro:
```
# a.h
struct A {
virtual int f();
virtual int g();
};
# a.cpp
#include "a.h"
int A::f() { return 10; }
int A::g() { return 10; }
# main.cpp
#include "a.h"
int g(A* a) {
return a->f();
}
int main(int argv, char** args) {
A a;
return g(&a);
}
$ clang++ -O2 -ffunction-sections -flto=thin -fwhole-program-vtables -fsplit-lto-unit -c main.cpp -o main.o && clang++ -Wl,--icf=safe -fuse-ld=lld -flto=thin main.o -o a.out && llvm-readobj -t a.out | grep -A 1 -e _ZN1A1fEv -e _ZN1A1gEv
Name: _ZN1A1fEv (480)
Value: 0x201830
--
Name: _ZN1A1gEv (490)
Value: 0x201840
```
Differential Revision: https://reviews.llvm.org/D100498
SLP supports perfect diamond matching for the vectorized tree entries
but do not support it for gathered entries and does not support
non-perfect (shuffled) matching with 1 or 2 tree entries. Patch adds
support for this matching to improve cost of the vectorized tree.
Differential Revision: https://reviews.llvm.org/D100495
When the ProcResGroup has BufferSize=0,
1. if there is a subunit in the list of write resources for the
scheduling class, do not attempt to schedule the ProcResGroup.
2. if there is not a subunit in the list of write resources for the
scheduling class, choose a subunit to use instead of the ProcResGroup.
3. having both the ProcResGroup and any of its subunits in the resources
implied by a InstRW is not supported.
Used to model parallel uses from a pool of resources.
Differential Revision: https://reviews.llvm.org/D98976
Used to model structural hazards on FP issue, where some
instructions take up 2 issue slots and others one as well
as similar structural hazards on load issue, where some
instructions take up two load lanes and others one.
Differential Revision: https://reviews.llvm.org/D98977
