Change the format type of *Personality and *LSDAAddress to PRIx64 since
they are of type uint64_t.
The problem was detected on mips builds, where it was printing junk values
and causing test failure.
Patch by Milos Stojanovic.
Differential Revision: https://reviews.llvm.org/D58451
llvm-svn: 355607
I had hoped we could remove the dependency on shell32.lib from lib/Support
(there isn't much depending on it), but looks like this will take a while. So
for now, port this over.
Differential Revision: https://reviews.llvm.org/D58925
llvm-svn: 355604
In some loops, we end up generating loop induction variables that look like:
{(-1 * (zext i16 (%i0 * %i1) to i32))<nsw>,+,1}
As opposed to the simpler:
{(zext i16 (%i0 * %i1) to i32),+,-1}
i.e we count up from -limit to 0, not the simpler counting down from limit to
0. This is because the scores, as LSR calculates them, are the same and the
second is filtered in place of the first. We end up with a redundant SUB from 0
in the code.
This patch tries to make the calculation of the setup cost a little more
thoroughly, recursing into the scev members to better approximate the setup
required. The cost function for comparing LSR costs is:
return std::tie(C1.NumRegs, C1.AddRecCost, C1.NumIVMuls, C1.NumBaseAdds,
C1.ScaleCost, C1.ImmCost, C1.SetupCost) <
std::tie(C2.NumRegs, C2.AddRecCost, C2.NumIVMuls, C2.NumBaseAdds,
C2.ScaleCost, C2.ImmCost, C2.SetupCost);
So this will only alter results if none of the other variables turn out to be
different.
Differential Revision: https://reviews.llvm.org/D58770
llvm-svn: 355597
Unsigned mul high for MIPS32 is selected into two PseudoInstructions:
PseudoMULTu and PseudoMFHI that use accumulator register class ACC64 for
some of its operands. Registers in this class have appropriate hi and lo
register as subregisters: $lo0 and $hi0 are subregisters of $ac0 etc.
mul instruction implicit-defs $lo0 and $hi0 according to MipsInstrInfo.td.
In functions where mul and PseudoMULTu are present fastRegisterAllocator
will "run out of registers during register allocation" because
'calcSpillCost' for $ac0 will return spillImpossible because subregisters
$lo0 and $hi0 of $ac0 are reserved by mul instruction above. A solution is
to mark implicit-defs of $lo0 and $hi0 as dead in mul instruction.
Differential Revision: https://reviews.llvm.org/D58715
llvm-svn: 355594
I need this to remove a binary from LLD test suite.
The patch also simplifies the code a bit.
Differential revision: https://reviews.llvm.org/D59082
llvm-svn: 355591
In the DJ-graph based computation of iterated dominance frontiers,
SuccNode->getIDom() == Node is one of the tests to check if (Node,Succ)
is a J-edge. If it is true, since Node is dominated by Root,
SuccLevel = level(Node)+1 > RootLevel
which means the next test SuccLevel > RootLevel will also be true. test
the check is redundant and can be deleted as it also involves one
indirection and provides no speed-up.
llvm-svn: 355589
When running lli --debug --force-interpreter=true the executed instructions are
printed but are missing newlines. This commit adds the missing newlines.
Patch by Andrew Brown.
Differential Revision: https://reviews.llvm.org/D57806
llvm-svn: 355587
Use this feature to fix a bug on ARM where 4 byte alignment is
incorrectly assumed.
Differential Revision: https://reviews.llvm.org/D57335
llvm-svn: 355585
A previous patch for "uniform-work-group-size" attribute was found to break
some RADV and possibly radeon SI tests and had to be retracted.
This patch fixes that.
Differential Revision: http://reviews.llvm.org/D58993
llvm-svn: 355574
Summary:
While implementing inlining support for callbr
(https://bugs.llvm.org/show_bug.cgi?id=40722), I hit a crash in Loop
Rotation when trying to build the entire x86 Linux kernel
(drivers/char/random.c). This is a small fix up to r353563.
Test case is drivers/char/random.c (with callbr's inlined), then ran
through creduce, then `opt -opt-bisect-limit=<limit>`, then bugpoint.
Thanks to Craig Topper for immediately spotting the fix, and teaching me
how to fish.
Reviewers: craig.topper, jyknight
Reviewed By: craig.topper
Subscribers: hiraditya, llvm-commits, srhines
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58929
llvm-svn: 355564
MIPS target supports lowering `RETURNADDR` and `FRAMEADDR` for a current
frame only. It's better to show an error message then crash on assertion
if `__builtin_return_address` is invoked with non-zero argument.
llvm-svn: 355558
Part 4 of CSPGO changes:
(1) add support in cmake for cspgo build.
(2) fix an issue in big endian.
(3) test cases.
Differential Revision: https://reviews.llvm.org/D54175
llvm-svn: 355541
Restore a reverted commit, with the silly mistake fixed. Sorry for the previous breakage.
Be consistent about how we treat atomics in non-zero address spaces. If we get to the backend, we tend to lower them as if in address space 0. Do the same if we need to insert a libcall instead.
Differential Revision: https://reviews.llvm.org/D58760
llvm-svn: 355540
Move the x86 combine from D58974 into the DAGCombine VSELECT code and update the SELECT version to use the isBooleanFlip helper as well.
Requested by @spatel on D59006
llvm-svn: 355533
In file PPCBranchSelector.cpp we tend to over estimate code size due to large
alignment and inline assembly. Usually it causes larger computed branch offset,
it is not big problem. But sometimes it may also causes smaller computed branch
offset than actual branch offset. If the offset is close to the limit of
encoding, it may cause problem at run time.
Following is a simplified example.
actual estimated
address address
...
bne Far 100 10c
.p2align 4
Near: 110 110
...
Far: 8108 8108
Actual offset: 0x8108 - 0x100 = 0x8008
Computed offset: 0x8108 - 0x10c = 0x7ffc
The computed offset is at most ((1 << alignment) - 4) bytes smaller than actual
offset. So we add this number to the offset for safety.
Differential Revision: https://reviews.llvm.org/D57718
llvm-svn: 355529
Emit an error for an unsupported relocation. mach-o relocations can't
encode the form -SYM + cst.
Differential Revision: https://reviews.llvm.org/D58944
llvm-svn: 355527
Use this feature to fix a bug on ARM where 4 byte alignment is
incorrectly assumed.
Differential Revision: https://reviews.llvm.org/D57335
llvm-svn: 355522
Summary:
This adds support for 64 bit buffer atomic arithmetic instructions but does not include
cmpswap as that depends on a fix to the way the register pairs are handled
Change-Id: Ib207ea65fb69487ccad5066ea647ae8ddfe2ce61
Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58918
llvm-svn: 355520
This allows us to store more info about where we're emitting the remarks
without cluttering LLVMContext. This is needed for future support for
the remark section.
Differential Revision: https://reviews.llvm.org/D58996
Original llvm-svn: 355507
llvm-svn: 355514
Summary:
In r354298 a DominatorTree construction was added via new function
combineToUSubWithOverflow, which was subsequently restructured into
replaceMathCmpWithIntrinsic in r354689. We are hitting a very long
compile time due to this repeated construction, once per math cmp in
the function.
We shouldn't need to build the DominatorTree more than once per
function, except when a transformation invalidates it. There is already
a boolean flag that is returned from these methods indicating whether
the DT has been modified. We can simply build the DT once per
Function walk in CodeGenPrepare::runOnFunction, since any time a change
is made we break out of the Function walk and restart it.
I modified the code so that both replaceMathCmpWithIntrinsic as well as
mergeSExts (which was also building a DT) use the DT constructed by the
run method.
From -mllvm -time-passes:
Before this patch: CodeGen Prepare user time is 328s
With this patch: CodeGen Prepare user time is 21s
Reviewers: spatel
Subscribers: jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58995
llvm-svn: 355512
This allows us to store more info about where we're emitting the remarks
without cluttering LLVMContext. This is needed for future support for
the remark section.
Differential Revision: https://reviews.llvm.org/D58996
llvm-svn: 355507
