As discussed on D73919, this replaces a few cases where we were
modifying multiple operands of instructions in-place with the
creation of a new instruction, which we generally prefer nowadays.
This tends to be more readable and less prone to worklist management
bugs.
Test changes are only superficial (instruction naming and order).
Fixes https://bugs.llvm.org/show_bug.cgi?id=44835. Skip the transform
if it wouldn't actually do anything (apart from removing and reinserting
the same instructions).
Note that the test case doesn't loop on current master anymore, only
on the LLVM 10 release branch. The issue is already mitigated on master
due to worklist order fixes, but we should fix the root cause there as well.
As a side note, we should probably assert in combineLoadToNewType()
that it does not combine to the same type. Not doing this here, because
this assertion would also be triggered in another place right now.
Differential Revision: https://reviews.llvm.org/D74278
Implement protection against the stack clash attack [0] through inline stack
probing.
Probe stack allocation every PAGE_SIZE during frame lowering or dynamic
allocation to make sure the page guard, if any, is touched when touching the
stack, in a similar manner to GCC[1].
This extends the existing `probe-stack' mechanism with a special value `inline-asm'.
Technically the former uses function call before stack allocation while this
patch provides inlined stack probes and chunk allocation.
Only implemented for x86.
[0] https://www.qualys.com/2017/06/19/stack-clash/stack-clash.txt
[1] https://gcc.gnu.org/ml/gcc-patches/2017-07/msg00556.html
This a recommit of 39f50da2a357a8f685b3540246c5d762734e035f with better option
handling and more portable testing
Differential Revision: https://reviews.llvm.org/D68720
This hasn't been used for years, its original implementation, D35700, had bugs that caused the reversion of most of the code, and since then x86 shuffle lowering/combining has handled most cases and can deal with the rest as well.
Summary:
For CTTZ we place a set bit just past where the non-promoted type
stopped so the extended bits won't be used for the count. For
CTTZ_ZERO_UNDEF we don't care what happens if no bits are set in
the original type and we end up counting into the extended bits.
So we can just use ANY_EXTEND for both cases.
This matches what is done in type legalization for these operations.
We make no effort to force the upper bits to zero.
Differential Revision: https://reviews.llvm.org/D74111
This improves on the following patch, which removed ARC runtime calls
taking inert global variables:
https://reviews.llvm.org/D62433
rdar://problem/59137105
Summary:
Debug Info Version was changed to use "Max" instead of "Warning" per the
original design intent - but this maxes old/new IR unlinkable, since
mismatched merge styles are a linking failure.
It seems possible/maybe reasonable to actually support the combination
of these two flags: Warn, but then use the maximum value rather than the
first value/earlier module's value.
Reviewers: tejohnson
Differential Revision: https://reviews.llvm.org/D74257
Calls to ObjC's objc_msgSend function are done by bitcasting the function global
to the required function type signature. This patch looks through this bitcast
so that we can do a direct call with bl on arm64 instead of using an indirect blr.
Differential Revision: https://reviews.llvm.org/D74241
Update lambda function
static auto InitializeRegisterBankOnce = [this](const auto &TRI) {
with
static auto InitializeRegisterBankOnce = [&]() {
Capture reference instead of passing argument, as there are buildbot
compiling errors related when passing argument.
This reduces the reliance on host tools and makes the build more
hermetic. Some of the runtimes already assume that certain tools are
always available, for example libc++ and libc++abi archive merging
relies on ar to extract files out of the archive, even on Darwin.
Differential Revision: https://reviews.llvm.org/D74107
Update lambda function
static auto InitializeRegisterBankOnce = [this](const auto &TRI) {
with
static auto InitializeRegisterBankOnce = [&]() {
Capture reference instead of passing argument, as there are buildbot
compiling errors related when passing argument.
On little endian targets prior to Power9, we spill vector registers using a
swapping store (i.e. stdxvd2x saves the vector with the two doublewords in
big endian order regardless of endianness). This is generally not a problem
since we restore them using the corresponding swapping load (lxvd2x). However
if the restore is done by the unwinder, the vector register contains data in
the incorrect order.
This patch fixes that by using Altivec loads/stores for vector saves and
restores in PEI (which keep the order correct) under those specific conditions:
- EH aware function
- Subtarget requires swaps for VSX memops (Little Endian prior to Power9)
Differential revision: https://reviews.llvm.org/D73692
Summary:
The accuracy limit to use rcp is adjusted to 1.0 ulp from 2.5 ulp.
Also, afn instead of arcp is used to allow inaccurate rcp to be used.
Reviewers:
arsenm
Differential Revision: https://reviews.llvm.org/D73588
The issue in the previous commits was that we swap the LHS and RHS while
looking for the constant. In SLT/SGT, the constant must be on the RHS, or the
optimization is invalid.
Move the swapping logic after the check for the SLT/SGT case and update tests.
Original commits:
d78cefb1601070cb028b61bbc1bd6f25a9c1837c
a3738414072900ace9cbbe209d0195a3443d1d54
Summary:
Current implementation of matchSwap in SIShrinkInstructions searches the entire
use_nodbg_operands set to find the possible pattern to generate v_swap instruction.
This approach will lead to a O(N^3) in compile time for SIShrinkInstructions.
But in reality, the matching pattern only exists within nearby instructions in the
same basic block. This work limits the search to a maximum of 16 instructions, and has
a linear compile time comsumption.
Reviewers:
rampitec, arsenm
Differential Revision: https://reviews.llvm.org/D74180
Implement protection against the stack clash attack [0] through inline stack
probing.
Probe stack allocation every PAGE_SIZE during frame lowering or dynamic
allocation to make sure the page guard, if any, is touched when touching the
stack, in a similar manner to GCC[1].
This extends the existing `probe-stack' mechanism with a special value `inline-asm'.
Technically the former uses function call before stack allocation while this
patch provides inlined stack probes and chunk allocation.
Only implemented for x86.
[0] https://www.qualys.com/2017/06/19/stack-clash/stack-clash.txt
[1] https://gcc.gnu.org/ml/gcc-patches/2017-07/msg00556.html
This a recommit of 39f50da2a357a8f685b3540246c5d762734e035f with correct option
flags set.
Differential Revision: https://reviews.llvm.org/D68720
hasReservedSpillSlot returns a dummy frame index of '0' on PPC64 for the
non-volatile condition registers, which leads to the CalleSavedInfo
either referencing an unrelated stack object, or an invalid object if
there are no stack objects. The latter case causes the mir-printer to
crash due to assertions that checks if the frame index referenced by a
CalleeSavedInfo is valid.
To fix the problem create an immutable FixedStack object at the correct offset
in the linkage area of the previous stack frame (ie SP + positive offset).
Differential Revision: https://reviews.llvm.org/D73709
Previously we took the restored flag in a GPR, extended it 32 or 64 bits. Then used as an input to a sub from 0. This requires creating a zero extend and creating a 0.
This patch changes this to just use an ADD with 255 to restore the carry flag and keep the SETB_C32r/SETB_C64r. Exactly like we handle SBB which is what SETB becomes.
Differential Revision: https://reviews.llvm.org/D74152
Summary:
This is a rework of D72611, using @LINE to check that errors are
reported against the right instruction instead of adding lots of extra
*-ERR-NEXT: check lines.
Reviewers: rampitec, arsenm, nhaehnle
Subscribers: kzhuravl, jvesely, wdng, yaxunl, dstuttard, tpr, t-tye, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74227
Add the isCandidateForCallSiteEntry predicate to MachineInstr to
determine whether a DWARF call site entry should be created for an
instruction.
For now, it's enough to have any call instruction that doesn't belong to
a blacklisted set of opcodes. For these opcodes, a call site entry isn't
meaningful.
Differential Revision: https://reviews.llvm.org/D74159
Allows more flexible use of buildMerge in places where
use operands are available as SrcOp since it does not
require explicit conversion to Register.
Simplify code with new buildMerge.
Differential Revision: https://reviews.llvm.org/D74223
When both little-endian and big-endian are tested, or both 32-bit and 64-bit are tested, use a template like the following with `-D BITS=32 -D ENCODE=LSB`
```
--- !ELF
FileHeader:
Class: ELFCLASS[[BITS]]
Data: ELFDATA2[[ENCODE]]
Type: ET_DYN
Machine: EM_X86_64
```
Reviewed By: grimar, jhenderson
Differential Revision: https://reviews.llvm.org/D73828
