Avoid implicit conversions from MachineInstrBundleInstr to MachineInstr*
in the AArch64 backend, mainly by preferring MachineInstr& over
MachineInstr* when a pointer isn't nullable.
llvm-svn: 274924
findScratchNonCalleeSaveRegister() just needs a simple liveness
analysis, use LivePhysRegs for that as it is simpler and does not depend
on the kill flags.
This commit adds a convenience function available() to LivePhysRegs:
This function returns true if the given register is not reserved and
neither the register nor any of its aliases are alive.
Differential Revision: http://reviews.llvm.org/D21865
llvm-svn: 274685
This used to be free, copying and moving DebugLocs became expensive
after the metadata rewrite. Passing by reference eliminates a ton of
track/untrack operations. No functionality change intended.
llvm-svn: 272512
Summary:
If the target requests it, use emptry spaces in the fixed and
callee-save stack area to allocate local stack objects.
AArch64: Change last callee-save reg stack object alignment instead of
size to leave a gap to take advantage of above change.
Reviewers: t.p.northover, qcolombet, MatzeB
Subscribers: rengolin, mcrosier, llvm-commits, aemerson
Differential Revision: http://reviews.llvm.org/D20220
llvm-svn: 271527
Summary:
Fix bug in MachO path where a frame index offset would not be reserved
for handling large frames when an extra non-used callee-save register
was saved. In the case where the extra register is reserved or not a
GPR (e.g. %FP in the MachO case), this would lead to the register
scavenger later failing when called from PrologEpilogInserter.
Reviewers: t.p.northover
Subscribers: aemerson, rengolin, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D20185
llvm-svn: 269697
Summary:
If a function needs to allocate both callee-save stack memory and local
stack memory, we currently decrement/increment the SP in two steps:
first for the callee-save area, and then for the local stack area. This
changes the code to allocate them both at once at the very beginning/end
of the function. This has two benefits:
1) there is one fewer sub/add micro-op in the prologue/epilogue
2) the stack adjustment instructions act as a scheduling barrier, so
moving them to the very beginning/end of the function increases post-RA
scheduler's ability to move instructions (that only depend on argument
registers) before any of the callee-save stores
This change can cause an increase in instructions if the original local
stack SP decrement could be folded into the first store to the stack.
This occurs when the first local stack store is to stack offset 0. In
this case we are trading off one more sub instruction for one fewer sub
micro-op (along with benefits (2) and (3) above).
Reviewers: t.p.northover
Subscribers: aemerson, rengolin, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D18619
llvm-svn: 268746
Summary:
Without MMOs, the callee-save load/store instructions were treated as
volatile by the MI post-RA scheduler and AArch64LoadStoreOptimizer.
Reviewers: t.p.northover, mcrosier
Subscribers: aemerson, rengolin, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D17661
llvm-svn: 266439
It is very likely that the swiftself parameter is alive throughout most
functions function so putting it into a callee save register should
avoid spills for the callers with only a minimum amount of extra spills
in the callees.
Currently the generated code is correct but unnecessarily spills and
reloads arguments passed in callee save registers, I will address this
in upcoming patches.
This also adds a missing check that for tail calls the preserved value
of the caller must be the same as the callees parameter.
Differential Revision: http://reviews.llvm.org/D19007
llvm-svn: 266251
This will become necessary in a subsequent change to make this method
merge adjacent stack adjustments, i.e. it might erase the previous
and/or next instruction.
It also greatly simplifies the calls to this function from Prolog-
EpilogInserter. Previously, that had a bunch of logic to resume iteration
after the call; now it just continues with the returned iterator.
Note that this changes the behaviour of PEI a little. Previously,
it attempted to re-visit the new instruction created by
eliminateCallFramePseudoInstr(). That code was added in r36625,
but I can't see any reason for it: the new instructions will obviously
not be pseudo instructions, they will not have FrameIndex operands,
and we have already accounted for the stack adjustment.
Differential Revision: http://reviews.llvm.org/D18627
llvm-svn: 265036
When the SP in not changed because of realignment/VLAs etc., we restore the SP
by using the previous value of SP and not the FP. Breaking the dependency will
help in cases when the epilog of a callee is close to the epilog of the caller;
for then "sub sp, fp, #" depends on the load restoring the FP in the epilog of
the callee.
http://reviews.llvm.org/D18060
Patch by Aditya Kumar and Evandro Menezes.
llvm-svn: 263458
This change adds a support for a preserve_most calling convention to the AArch64 backend, similar to how it was done for X86-64.
There is also a subsequent patch on top of this one to add a tail-calls support for this calling convention.
Differential Revision: http://reviews.llvm.org/D18016
llvm-svn: 263092
Summary:
This change enables frame pointer elimination in non-leaf functions.
The -fomit-frame-pointer option still needs to be used when compiling
via clang (or an equivalent method of not setting the
'no-frame-pointer-elim*' function attributes if generating llvm IR via
some other method) to take advantage of this optimization.
This change should be NFC when compiling via clang without
-fomit-frame-pointer.
Reviewers: t.p.northover
Subscribers: aemerson, rengolin, tberghammer, qcolombet, llvm-commits, danalbert, mcrosier, srhines
Differential Revision: http://reviews.llvm.org/D17730
llvm-svn: 262495
Summary:
Avoid special case for FP, LR CFI emission and just allow general
AArch64FrameLowering::emitCalleeSavedFrameMoves() to handle them. Also,
stop recalculating the stack offsets in emitCalleeSavedFrameMoves()
since we can just reuse the previously calculated offset stored in the
MachineFrameInfo.
Depends on D17000
Reviewers: t.p.northover, rengolin, mcrosier, jmolloy
Subscribers: aemerson, rengolin, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D17004
llvm-svn: 261885
Summary:
Fix a bug in epilog generation where the incoming stack arguments were
not being popped for fastcc functions when -tailcallopt was passed.
Reviewers: t.p.northover, mcrosier, jmolloy, rengolin
Subscribers: aemerson, rengolin, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D16894
llvm-svn: 261650
Summary:
Before this change, callee-save registers would be rounded up to even
pairs of GPRs and FPRs. This change eliminates these extra padding
load/stores, though it does keep the stack allocation the same size
unless both the GPR and FPR sets have an odd size, in which case one
full pair stack slot (16 bytes) is saved.
This optimization cannot currently be done for MachO targets since they
rely on a fast-path .debug_frame equivalent that can only encode
callee-save registers as pairs.
Reviewers: t.p.northover, rengolin, mcrosier, jmolloy
Subscribers: aemerson, rengolin, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D17000
llvm-svn: 260689
Summary:
Factor out common code for callee-save register pair calculation. This
is intended to simplify follow-on changes that reduce the number of
registers saved/restored.
Depends on D16732
Reviewers: mcrosier, jmolloy, t.p.northover
Subscribers: aemerson, rengolin, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D16734
llvm-svn: 259384
Summary:
Simplify callee-save register save/restore code generation by
remembering the size of the callee-save area when it is computed so we
don't have to scan the prologue/epilogue instructions again later to
reconstruct it.
This is intended to simplify follow-on changes that reduce the number of
registers saved/restored.
Reviewers: mcrosier, jmolloy, t.p.northover
Subscribers: aemerson, rengolin, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D16732
llvm-svn: 259365
Summary:
This review is related to another review request http://reviews.llvm.org/D11268, does the same and merely fixes a couple of issues with it.
D11268 is quite old and has merge conflicts against the current trunk.
This request
- rebases D11268 onto the new trunk;
- resolves the merge conflicts;
- fixes the prologue_end tests, which do not pass due to the subprogram definitions not marked as distinct.
Reviewers: echristo, rengolin, kubabrecka
Subscribers: aemerson, rengolin, jyknight, dsanders, llvm-commits, asl
Differential Revision: http://reviews.llvm.org/D14338
llvm-svn: 252177
function.
This was the same as getFrameIndexReference, but without the FrameReg
output.
Differential Revision: http://reviews.llvm.org/D12042
llvm-svn: 245148
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
This patch is quite boring overall, except for some uglyness in
ASMPrinter which has a getDataLayout function but has some clients
that use it without a Module (llmv-dsymutil, llvm-dwarfdump), so
some methods are taking a DataLayout as parameter.
Reviewers: echristo
Subscribers: yaron.keren, rafael, llvm-commits, jholewinski
Differential Revision: http://reviews.llvm.org/D11090
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 242386
Summary:
processFunctionBeforeCalleeSavedScan was renamed to determineCalleeSaves and now takes a BitVector parameter as of rL242165, reviewed in http://reviews.llvm.org/D10909
WebAssembly is still marked as experimental and therefore doesn't build by default. It does, however, grep by default! I notice that processFunctionBeforeCalleeSavedScan is still mentioned in a few comments and error messages, which I also fixed.
Reviewers: qcolombet, sunfish
Subscribers: jfb, dsanders, hfinkel, MatzeB, llvm-commits
Differential Revision: http://reviews.llvm.org/D11199
llvm-svn: 242242
We have a detailed def/use lists for every physical register in
MachineRegisterInfo anyway, so there is little use in maintaining an
additional bitset of which ones are used.
Removing it frees us from extra book keeping. This simplifies
VirtRegMap.
Differential Revision: http://reviews.llvm.org/D10911
llvm-svn: 242173
This changes TargetFrameLowering::processFunctionBeforeCalleeSavedScan():
- Rename the function to determineCalleeSaves()
- Pass a bitset of callee saved registers by reference, thus avoiding
the function-global PhysRegUsed bitset in MachineRegisterInfo.
- Without PhysRegUsed the implementation is fine tuned to not save
physcial registers which are only read but never modified.
Related to rdar://21539507
Differential Revision: http://reviews.llvm.org/D10909
llvm-svn: 242165
Fixes PR23804: assertion failure in emitPrologue in the case of a
function with an empty frame and a dynamic alloca that needs stack
realignment. This is a typical case for AddressSanitizer.
llvm-svn: 241943
This was previously returning int. However there are no negative opcode
numbers and more importantly this was needlessly different from
MCInstrDesc::getOpcode() (which even is the value returned here) and
SDValue::getOpcode()/SDNode::getOpcode().
llvm-svn: 237611
This patch introduces a new pass that computes the safe point to insert the
prologue and epilogue of the function.
The interest is to find safe points that are cheaper than the entry and exits
blocks.
As an example and to avoid regressions to be introduce, this patch also
implements the required bits to enable the shrink-wrapping pass for AArch64.
** Context **
Currently we insert the prologue and epilogue of the method/function in the
entry and exits blocks. Although this is correct, we can do a better job when
those are not immediately required and insert them at less frequently executed
places.
The job of the shrink-wrapping pass is to identify such places.
** Motivating example **
Let us consider the following function that perform a call only in one branch of
a if:
define i32 @f(i32 %a, i32 %b) {
%tmp = alloca i32, align 4
%tmp2 = icmp slt i32 %a, %b
br i1 %tmp2, label %true, label %false
true:
store i32 %a, i32* %tmp, align 4
%tmp4 = call i32 @doSomething(i32 0, i32* %tmp)
br label %false
false:
%tmp.0 = phi i32 [ %tmp4, %true ], [ %a, %0 ]
ret i32 %tmp.0
}
On AArch64 this code generates (removing the cfi directives to ease
readabilities):
_f: ; @f
; BB#0:
stp x29, x30, [sp, #-16]!
mov x29, sp
sub sp, sp, #16 ; =16
cmp w0, w1
b.ge LBB0_2
; BB#1: ; %true
stur w0, [x29, #-4]
sub x1, x29, #4 ; =4
mov w0, wzr
bl _doSomething
LBB0_2: ; %false
mov sp, x29
ldp x29, x30, [sp], #16
ret
With shrink-wrapping we could generate:
_f: ; @f
; BB#0:
cmp w0, w1
b.ge LBB0_2
; BB#1: ; %true
stp x29, x30, [sp, #-16]!
mov x29, sp
sub sp, sp, #16 ; =16
stur w0, [x29, #-4]
sub x1, x29, #4 ; =4
mov w0, wzr
bl _doSomething
add sp, x29, #16 ; =16
ldp x29, x30, [sp], #16
LBB0_2: ; %false
ret
Therefore, we would pay the overhead of setting up/destroying the frame only if
we actually do the call.
** Proposed Solution **
This patch introduces a new machine pass that perform the shrink-wrapping
analysis (See the comments at the beginning of ShrinkWrap.cpp for more details).
It then stores the safe save and restore point into the MachineFrameInfo
attached to the MachineFunction.
This information is then used by the PrologEpilogInserter (PEI) to place the
related code at the right place. This pass runs right before the PEI.
Unlike the original paper of Chow from PLDI’88, this implementation of
shrink-wrapping does not use expensive data-flow analysis and does not need hack
to properly avoid frequently executed point. Instead, it relies on dominance and
loop properties.
The pass is off by default and each target can opt-in by setting the
EnableShrinkWrap boolean to true in their derived class of TargetPassConfig.
This setting can also be overwritten on the command line by using
-enable-shrink-wrap.
Before you try out the pass for your target, make sure you properly fix your
emitProlog/emitEpilog/adjustForXXX method to cope with basic blocks that are not
necessarily the entry block.
** Design Decisions **
1. ShrinkWrap is its own pass right now. It could frankly be merged into PEI but
for debugging and clarity I thought it was best to have its own file.
2. Right now, we only support one save point and one restore point. At some
point we can expand this to several save point and restore point, the impacted
component would then be:
- The pass itself: New algorithm needed.
- MachineFrameInfo: Hold a list or set of Save/Restore point instead of one
pointer.
- PEI: Should loop over the save point and restore point.
Anyhow, at least for this first iteration, I do not believe this is interesting
to support the complex cases. We should revisit that when we motivating
examples.
Differential Revision: http://reviews.llvm.org/D9210
<rdar://problem/3201744>
llvm-svn: 236507
The spilled registers are pristine and thus, correctly handled by
the register scavenger and so on, but the liveness information is
strictly speaking wrong at this point.
Fix that.
llvm-svn: 234664
Canonicalize access to function attributes to use the simpler API.
getAttributes().getAttribute(AttributeSet::FunctionIndex, Kind)
=> getFnAttribute(Kind)
getAttributes().hasAttribute(AttributeSet::FunctionIndex, Kind)
=> hasFnAttribute(Kind)
llvm-svn: 229218
derived classes.
Since global data alignment, layout, and mangling is often based on the
DataLayout, move it to the TargetMachine. This ensures that global
data is going to be layed out and mangled consistently if the subtarget
changes on a per function basis. Prior to this all targets(*) have
had subtarget dependent code moved out and onto the TargetMachine.
*One target hasn't been migrated as part of this change: R600. The
R600 port has, as a subtarget feature, the size of pointers and
this affects global data layout. I've currently hacked in a FIXME
to enable progress, but the port needs to be updated to either pass
the 64-bitness to the TargetMachine, or fix the DataLayout to
avoid subtarget dependent features.
llvm-svn: 227113
Original patch by Luke Iannini. Minor improvements and test added by
Erik de Castro Lopo.
Differential Revision: http://reviews.llvm.org/D6877
From: Erik de Castro Lopo <erikd@mega-nerd.com>
llvm-svn: 226473
Debug info marks the first instruction without the FrameSetup flag
as being the end of the function prologue. Any CFI instructions in the
middle of the function prologue would cause debug info to end the prologue
too early and worse, attach the line number of the CFI instruction, which
incidentally is often 0.
llvm-svn: 224294
Do not eliminate the frame pointer if there is a stackmap or patchpoint in the
function. All stackmap references should be FP relative.
This fixes PR21107.
llvm-svn: 218920
shorter/easier and have the DAG use that to do the same lookup. This
can be used in the future for TargetMachine based caching lookups from
the MachineFunction easily.
Update the MIPS subtarget switching machinery to update this pointer
at the same time it runs.
llvm-svn: 214838
