We were trying to avoid using a FrameIndex operand in non-pointer
operands in a convoluted way, and would break because of
using TargetFrameIndex. The TargetFrameIndex should only be used
in the case where it makes sense to fold it as part of the addressing
mode, otherwise it requires materialization like a normal constant.
This wasn't working reliably and failed in the added testcase, hitting
the assert when processing the frame index.
The TargetFrameIndex was coming from trying to produce an AssertZext
limiting the maximum stack size. I'm not sure this was correct to begin
with, because it is apparently possible to have a single workitem
dispatch that requires all 4G of private memory.
llvm-svn: 281824
Summary: This removes disabled instructions from match tables so we will not match them at all.
Reviewers: tstellarAMD, vpykhtin, artem.tamazov
Subscribers: wdng, nhaehnle, arsenm
Differential Revision: https://reviews.llvm.org/D24452
llvm-svn: 281216
Summary:
Prevously assembler parsed all literals as either 32-bit integers or 32-bit floating-point values. Because of this we couldn't support f64 literals.
E.g. in instruction "v_fract_f64 v[0:1], 0.5", literal 0.5 was encoded as 32-bit literal 0x3f000000, which is incorrect and will be interpreted as 3.0517578125E-5 instead of 0.5. Correct encoding is inline constant 240 (optimal) or 32-bit literal 0x3FE00000 at least.
With this change the way immediate literals are parsed is changed. All literals are always parsed as 64-bit values either integer or floating-point. Then we convert parsed literals to correct form based on information about type of operand parsed (was literal floating or binary) and type of expected instruction operands (is this f32/64 or b32/64 instruction).
Here are rules how we convert literals:
- We parsed fp literal:
- Instruction expects 64-bit operand:
- If parsed literal is inlinable (e.g. v_fract_f64_e32 v[0:1], 0.5)
- then we do nothing this literal
- Else if literal is not-inlinable but instruction requires to inline it (e.g. this is e64 encoding, v_fract_f64_e64 v[0:1], 1.5)
- report error
- Else literal is not-inlinable but we can encode it as additional 32-bit literal constant
- If instruction expect fp operand type (f64)
- Check if low 32 bits of literal are zeroes (e.g. v_fract_f64 v[0:1], 1.5)
- If so then do nothing
- Else (e.g. v_fract_f64 v[0:1], 3.1415)
- report warning that low 32 bits will be set to zeroes and precision will be lost
- set low 32 bits of literal to zeroes
- Instruction expects integer operand type (e.g. s_mov_b64_e32 s[0:1], 1.5)
- report error as it is unclear how to encode this literal
- Instruction expects 32-bit operand:
- Convert parsed 64 bit fp literal to 32 bit fp. Allow lose of precision but not overflow or underflow
- Is this literal inlinable and are we required to inline literal (e.g. v_trunc_f32_e64 v0, 0.5)
- do nothing
- Else report error
- Do nothing. We can encode any other 32-bit fp literal (e.g. v_trunc_f32 v0, 10000000.0)
- Parsed binary literal:
- Is this literal inlinable (e.g. v_trunc_f32_e32 v0, 35)
- do nothing
- Else, are we required to inline this literal (e.g. v_trunc_f32_e64 v0, 35)
- report error
- Else, literal is not-inlinable and we are not required to inline it
- Are high 32 bit of literal zeroes or same as sign bit (32 bit)
- do nothing (e.g. v_trunc_f32 v0, 0xdeadbeef)
- Else
- report error (e.g. v_trunc_f32 v0, 0x123456789abcdef0)
For this change it is required that we know operand types of instruction (are they f32/64 or b32/64). I added several new register operands (they extend previous register operands) and set operand types to corresponding types:
'''
enum OperandType {
OPERAND_REG_IMM32_INT,
OPERAND_REG_IMM32_FP,
OPERAND_REG_INLINE_C_INT,
OPERAND_REG_INLINE_C_FP,
}
'''
This is not working yet:
- Several tests are failing
- Problems with predicate methods for inline immediates
- LLVM generated assembler parts try to select e64 encoding before e32.
More changes are required for several AsmOperands.
Reviewers: vpykhtin, tstellarAMD
Subscribers: arsenm, kzhuravl, artem.tamazov
Differential Revision: https://reviews.llvm.org/D22922
llvm-svn: 281050
Summary:
Created a new td file MIMGInstructions.td which contains all definitions
of MIMG related instructions.
Reviewed by:
kzhuravl, vpykhtin
Differential Revision:
http://reviews.llvm.org/D24106
llvm-svn: 280385
Summary:
Two types of stores are possible in pixel shaders: stores to memory that are
explicitly requested at the API level, and stores that are an implementation
detail of register spilling or lowering of arrays.
For the first kind of store, we must ensure that helper pixels have no effect
and hence WQM must be disabled. The second kind of store must always be
executed, because the written value may be loaded again in a way that is
relevant for helper pixels as well -- and there are no externally visible
effects anyway.
This is a candidate for the 3.9 release branch.
Reviewers: arsenm, tstellarAMD, mareko
Subscribers: arsenm, kzhuravl, llvm-commits
Differential Revision: https://reviews.llvm.org/D22675
llvm-svn: 277504
This is to help moveSILowerControlFlow to before regalloc.
There are a couple of tradeoffs with this. The complete CFG
is visible to more passes, the loop body avoids an extra copy of m0,
vcc isn't required, and immediate offsets can be shrunk into s_movk_i32.
The disadvantage is the register allocator doesn't understand that
the single lane's vector is dead within the loop body, so an extra
register is used to outlive the loop block when expanding the
VGPR -> m0 loop. This also now results in worse waitcnt insertion
before the loop instead of after for pending operations at the point
of the indexing, but that should be fixed by future improvements to
cross block waitcnt insertion.
v_movreld_b32's operands are now modeled more correctly since vdst
is not a true output. This is kind of a hack to treat vdst as a
use operand. Extra checking is required in the verifier since
I can't seem to get tablegen to emit an implicit operand for a
virtual register.
llvm-svn: 275934
Summary:
Previously, constant index insertelements would be turned into SI_INDIRECT_DST,
which is bound to prevent some optimization opportunities. Worse, it mislead
the heuristic that decides whether immediates should be lowered to S_MOV_B32
or V_MOV_B32 in a way that resulted in unnecessary v_readfirstlanes.
Reviewers: arsenm, tstellarAMD
Subscribers: arsenm, kzhuravl, llvm-commits
Differential Revision: http://reviews.llvm.org/D22217
llvm-svn: 275160
Summary:
Setting MIMG to 0 has a bunch of unexpected side effects, including that
isVMEM returns false which leads to incorrect treatment in the hazard
recognizer. The reason I noticed it is that it also leads to incorrect
treatment in VGPR-to-SGPR copies, which is one cause of the referenced bug.
The only reason why MIMG was set to 0 is to signal the special handling of
dmasks, but that can be checked differently.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96877
Reviewers: arsenm, tstellarAMD
Subscribers: arsenm, kzhuravl, llvm-commits
Differential Revision: http://reviews.llvm.org/D22210
llvm-svn: 275113
Because of the special immediate operand, the constant
bus is already used so SGPRs are never useful.
r263212 changed the name of the immediate operand, which
broke the verifier check for the restriction.
llvm-svn: 274564
Summary:
These have been replaced with TableGen code (except for isConstantLoad,
which is still used for R600). The queries were broken for cases
where MemOperand was a PseudoSourceValue.
Reviewers: arsenm
Subscribers: arsenm, kzhuravl, llvm-commits
Differential Revision: http://reviews.llvm.org/D21684
llvm-svn: 274561
Summary:
The isGlobalLoad() query was returning true for constant address space loads
with memory types less than 32-bits, which is wrong. This logic has been
replaced with PatFrag in the TableGen files, to provide the same functionality.
Reviewers: arsenm
Subscribers: arsenm, kzhuravl, llvm-commits
Differential Revision: http://reviews.llvm.org/D21696
llvm-svn: 274521
Summary: dst_sel and dst_unused disabled for VOPC as they have no effect on result
Reviewers: artem.tamazov, tstellarAMD, vpykhtin
Subscribers: arsenm, kzhuravl
Differential Revision: http://reviews.llvm.org/D21376
llvm-svn: 274340
Split AMDGPUSubtarget into amdgcn/r600 specific subclasses.
This removes most of the static_casting of the basic codegen
classes everywhere, and tries to restrict the features
visible on the wrong target.
llvm-svn: 273652
Summary:
We now use a standard fixup type applying the pc-relative address of
constant address space variables, and we have the GlobalAddress lowering
code add the required 4 byte offset to the global address rather than
doing it as part of the fixup.
This refactoring will make it easier to use the same code for global
address space variables and also simplifies the code.
Re-commit this after fixing a bug where we were trying to use a
reference to a Triple object that had already been destroyed.
Reviewers: arsenm, kzhuravl
Subscribers: arsenm, kzhuravl, llvm-commits
Differential Revision: http://reviews.llvm.org/D21154
llvm-svn: 272705
Summary:
We now use a standard fixup type applying the pc-relative address of
constant address space variables, and we have the GlobalAddress lowering
code add the required 4 byte offset to the global address rather than
doing it as part of the fixup.
This refactoring will make it easier to use the same code for global
address space variables and also simplifies the code.
Reviewers: arsenm, kzhuravl
Subscribers: arsenm, kzhuravl, llvm-commits
Differential Revision: http://reviews.llvm.org/D21154
llvm-svn: 272675
Summary:
sext() modifier is supported in SDWA instructions only for integer operands. Spec is unclear should integer operands support abs and neg modifiers with sext - for now they are not supported.
Renamed InputModsWithNoDefault to FloatInputMods. Added SextInputMods for operands that support sext() modifier.
Added AMDGPUOperand::Modifier struct to handle register and immediate modifiers.
Code cleaning in AMDGPUOperand class: organize method in groups (render-, predicate-methods...).
Reviewers: vpykhtin, artem.tamazov, tstellarAMD
Subscribers: arsenm, kzhuravl
Differential Revision: http://reviews.llvm.org/D20968
llvm-svn: 272384
Another step for unification llvm assembler/disassembler with sp3.
Besides, CodeGen output is a bit improved, thus changes in CodeGen tests.
Assembler/Disassembler tests updated/added.
Differential Revision: http://reviews.llvm.org/D20796
llvm-svn: 271900
Summary:
Added custom converters for SDWA instruction to support optional operands and modifiers.
Support for _dpp and _sdwa suffixes that allows to force DPP or SDWA encoding for instructions.
Reviewers: tstellarAMD, vpykhtin, artem.tamazov
Subscribers: arsenm, kzhuravl
Differential Revision: http://reviews.llvm.org/D20625
llvm-svn: 271655
