This patch creates a platform-independent interface to a PDB reader.
There is currently no implementation of this interface, which will
be provided in future patches. This defines the basic object model
which any implementation must conform to.
Reviewed by: David Blaikie
Differential Revision: http://reviews.llvm.org/D7356
llvm-svn: 228428
This was a trivial think-o, but it's in a method of a templated class
and doesn't have any callers yet, so the compiler let it pass. I hope
to add a unit test to cover this soon.
llvm-svn: 228425
by using a segment set.
The patch addresses a compile-time performance regression in the LiveIntervals
analysis pass (see http://llvm.org/bugs/show_bug.cgi?id=18580). This regression
is especially critical when compiling long functions. Our analysis had shown
that the most of time is taken for generation of live intervals for physical
registers. Insertions in the middle of the array of live ranges cause quadratic
algorithmic complexity, which is apparently the main reason for the slow-down.
Overview of changes:
- The patch introduces an additional std::set<Segment>* member in LiveRange for
storing segments in the phase of initial creation. The set is used if this
member is not NULL, otherwise everything works the old way.
- The set of operations on LiveRange used during initial creation (i.e. used by
createDeadDefs and extendToUses) have been reimplemented to use the segment
set if it is available.
- After a live range is created the contents of the set are flushed to the
segment vector, because the set is not as efficient as the vector for the
later uses of the live range. After the flushing, the set is deleted and
cannot be used again.
- The set is only for live ranges computed in
LiveIntervalAnalysis::computeLiveInRegUnits() and getRegUnit() but not in
computeVirtRegs(), because I did not bring any performance benefits to
computeVirtRegs() and for some examples even brought a slow down.
Patch by Vaidas Gasiunas <vaidas.gasiunas@sap.com>
Differential Revision: http://reviews.llvm.org/D6013
llvm-svn: 228421
This will allow it to be shared with the new Loop Distribution pass.
getFirstInst is currently duplicated across LoopVectorize.cpp and
LoopAccessAnalysis.cpp. This is a short-term work-around until we figure out
a better solution.
NFC. (The code moved is adjusted a bit for the name of the Loop member and
that PtrRtCheck is now a reference rather than a pointer.)
llvm-svn: 228418
Normalize
select(C0, select(C1, a, b), b) -> select((C0 & C1), a, b)
select(C0, a, select(C1, a, b)) -> select((C0 | C1), a, b)
This normal form may enable further combines on the And/Or and shortens
paths for the values. Many targets prefer the other but can go back
easily in CodeGen.
Differential Revision: http://reviews.llvm.org/D7399
llvm-svn: 228409
llvm-mode was previously confused when variable names contained keywords.
This changes ensures that keywords are only highlighted when they're standalone.
Patch by Wilfred Hughes!
llvm-svn: 228396
Doesn't seem necessary anymore. I think this was mostly compensating for
not enabling WQM for texture sampling instructions.
v2: Add test coverage
Reviewed-by: Tom Stellard <tom@stellard.net>
llvm-svn: 228373
If whole quad mode isn't enabled for these, the level of detail is
calculated incorrectly for pixels along diagonal triangle edges, causing
artifacts.
v2: Use a TSFlag instead of lots of switch cases
v3: Add test coverage
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88642
Reviewed-by: Tom Stellard <tom@stellard.net>
llvm-svn: 228372
Since testing the function indirectly is tricky, introduce a direct
print-memderefs pass, in the same spirit as print-memdeps, which prints
dereferenceability information matched by FileCheck.
Differential Revision: http://reviews.llvm.org/D7075
llvm-svn: 228369
Avoid the creation of select instructions which can result in different
scheduling of the selects.
I also added a bunch of additional store volatiles. Those avoid A
CodeGen problem (bug?) where normalizes and denomarlizing the control
moves all shift instructions into the first block where ISel can't match
them together with the cmps.
llvm-svn: 228362
Specifically:
- Calculate the loop pre-header once at the stat of HoistOutOfLoop, so:
- We don't-DFS walk the MachineDomTree if we aren't going to do anything
- Don't call getCurPreheader for each Scope
- Don't needlessly use a do-while loop
- Use early exit for Scopes.size() == 0
No functional changes intended.
llvm-svn: 228350
Fixes PR22462: two of the tests have regressed for a while,
but were using CHECK-NOT to match "May:". The actual output
was changed to "MayAlias:" at some point, which made the tests
useless.
Two others return MayAlias only because of a lack of analysis;
BasicAA returns PartialAlias in those cases, when a datalayout
is present.
llvm-svn: 228346
By default, store all local variables in dynamic alloca instead of
static one. It reduces the stack space usage in use-after-return mode
(dynamic alloca will not be called if the local variables are stored
in a fake stack), and improves the debug info quality for local
variables (they will not be described relatively to %rbp/%rsp, which
are assumed to be clobbered by function calls).
llvm-svn: 228336
PassManager instance. In one case we can make the determination
from the Triple, in the other (execution dependency pass) the
pass will avoid running if we don't have any code that uses that
register class so go ahead and add it to the pipeline.
llvm-svn: 228334
dealing with module level emission. Currently this is using
the Triple to determine, but eventually the logic should
probably migrate to TLOF.
llvm-svn: 228332
PowerPC supports pre-increment load/store instructions (except for Altivec/VSX
vector load/stores). Using these on embedded cores can be very important, but
most loops are not naturally set up to use them. We can often change that,
however, by placing loops into a non-canonical form. Generically, this means
transforming loops like this:
for (int i = 0; i < n; ++i)
array[i] = c;
to look like this:
T *p = array[-1];
for (int i = 0; i < n; ++i)
*++p = c;
the key point is that addresses accessed are pulled into dedicated PHIs and
"pre-decremented" in the loop preheader. This allows the use of pre-increment
load/store instructions without loop peeling.
A target-specific late IR-level pass (running post-LSR), PPCLoopPreIncPrep, is
introduced to perform this transformation. I've used this code out-of-tree for
generating code for the PPC A2 for over a year. Somewhat to my surprise,
running the test suite + externals on a P7 with this transformation enabled
showed no performance regressions, and one speedup:
External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk
-2.32514% +/- 1.03736%
So I'm going to enable it on everything for now. I was surprised by this
because, on the POWER cores, these pre-increment load/store instructions are
cracked (and, thus, harder to schedule effectively). But seeing no regressions,
and feeling that it is generally easier to split instructions apart late than
it is to combine them late, this might be the better approach regardless.
In the future, we might want to integrate this functionality into LSR (but
currently LSR does not create new PHI nodes, so (for that and other reasons)
significant work would need to be done).
llvm-svn: 228328
PowerPC supports pre-increment floating-point load/store instructions, both r+r
and r+i, and we had patterns for them, but they were not marked as legal. Mark
them as legal (and add a test case).
llvm-svn: 228327
The combine that forms extloads used to be disabled on vector types,
because "None of the supported targets knows how to perform load and
sign extend on vectors in one instruction."
That's not entirely true, since at least SSE4.1 X86 knows how to do
those sextloads/zextloads (with PMOVS/ZX).
But there are several aspects to getting this right.
First, vector extloads are controlled by a profitability callback.
For instance, on ARM, several instructions have folded extload forms,
so it's not always beneficial to create an extload node (and trying to
match extloads is a whole 'nother can of worms).
The interesting optimization enables folding of s/zextloads to illegal
(splittable) vector types, expanding them into smaller legal extloads.
It's not ideal (it introduces some legalization-like behavior in the
combine) but it's better than the obvious alternative: form illegal
extloads, and later try to split them up. If you do that, you might
generate extloads that can't be split up, but have a valid ext+load
expansion. At vector-op legalization time, it's too late to generate
this kind of code, so you end up forced to scalarize. It's better to
just avoid creating egregiously illegal nodes.
This optimization is enabled unconditionally on X86.
Note that the splitting combine is happy with "custom" extloads. As
is, this bypasses the actual custom lowering, and just unrolls the
extload. But from what I've seen, this is still much better than the
current custom lowering, which does some kind of unrolling at the end
anyway (see for instance load_sext_4i8_to_4i64 on SSE2, and the added
FIXME).
Also note that the existing combine that forms extloads is now also
enabled on legal vectors. This doesn't have a big effect on X86
(because sext+load is usually combined to sext_inreg+aextload).
On ARM it fires on some rare occasions; that's for a separate commit.
Differential Revision: http://reviews.llvm.org/D6904
llvm-svn: 228325
The return value's address must be returned in %rax.
i.e. the callee needs to copy the sret argument (%rdi)
into the return value (%rax).
This probably won't manifest as a bug when the caller is LLVM-compiled
code. But it is an ABI guarantee and tools expect it.
llvm-svn: 228321
