This patch removes all uses of `std::iterator`, which was deprecated in C++17.
While this isn't currently an issue while compiling LLVM, it's useful for those using LLVM as a library.
For some reason there're a few places that were seemingly able to use `std` functions unqualified, which no longer works after this patch. I've updated those places, but I'm not really sure why it worked in the first place.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D67586
This reverts commit 0345d88de654259ae90494bf9b015416e2cccacb.
Google internal backend uses EntrySU, we are looking into removing
dependency on it.
Differential Revision: https://reviews.llvm.org/D88018
In some cases ScheduleDAGRRList has to add new nodes to resolve problems
with interfering physical registers. When new nodes are added, it
completely re-computes the topological order, which can take a long
time, but is unnecessary. We only add nodes one by one, and initially
they do not have any predecessors. So we can just insert them at the end
of the vector. Later we add predecessors, but the helper function
properly updates the topological order much more efficiently. With this
change, the compile time for the program below drops from 300s to 30s on
my machine.
define i11129 @test1() {
%L1 = load i11129, i11129* undef
%B30 = ashr i11129 %L1, %L1
store i11129 %B30, i11129* undef
ret i11129 %L1
}
This should be generally beneficial, as we can skip a large amount of
work. Theoretically there are some scenarios where we might not safe
much, e.g. when we add a dependency between the first and last node.
Then we would have to shift all nodes. But we still do not have to spend
the time re-computing the initial order.
Reviewers: MatzeB, atrick, efriedma, niravd, paquette
Reviewed By: paquette
Differential Revision: https://reviews.llvm.org/D59722
Currently there is a single point in ScheduleDAGRRList, where we
actually query the topological order (besides init code). Currently we
are recomputing the order after adding a node (which does not have
predecessors) and then we add predecessors edge-by-edge.
We can avoid adding edges one-by-one after we added a new node. In that case, we can
just rebuild the order from scratch after adding the edges to the DAG
and avoid all the updates to the ordering.
Also, we can delay updating the DAG until we query the DAG, if we keep a
list of added edges. Depending on the number of updates, we can either
apply them when needed or recompute the order from scratch.
This brings down the geomean compile time for of CTMark with -O1 down 0.3% on X86,
with no regressions.
Reviewers: MatzeB, atrick, efriedma, niravd, paquette
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D60125
llvm-svn: 358583
As noted in https://bugs.llvm.org/show_bug.cgi?id=36651, the specialization for
isPodLike<std::pair<...>> did not match the expectation of
std::is_trivially_copyable which makes the memcpy optimization invalid.
This patch renames the llvm::isPodLike trait into llvm::is_trivially_copyable.
Unfortunately std::is_trivially_copyable is not portable across compiler / STL
versions. So a portable version is provided too.
Note that the following specialization were invalid:
std::pair<T0, T1>
llvm::Optional<T>
Tests have been added to assert that former specialization are respected by the
standard usage of llvm::is_trivially_copyable, and that when a decent version
of std::is_trivially_copyable is available, llvm::is_trivially_copyable is
compared to std::is_trivially_copyable.
As of this patch, llvm::Optional is no longer considered trivially copyable,
even if T is. This is to be fixed in a later patch, as it has impact on a
long-running bug (see r347004)
Note that GCC warns about this UB, but this got silented by https://reviews.llvm.org/D50296.
Differential Revision: https://reviews.llvm.org/D54472
llvm-svn: 351701
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
MachineFunction can only be used in code using lib/CodeGen, hence we
can keep a more specific reference to LLVMTargetMachine rather than just
TargetMachine around.
Do the same for references in ScheduleDAG and RegUsageInfoCollector.
llvm-svn: 346183
- Instead of having both `SUnit::dump(ScheduleDAG*)` and
`ScheduleDAG::dumpNode(ScheduleDAG*)`, just keep the latter around.
- Add `ScheduleDAG::dump()` and avoid code duplication in several
places. Implement it for different ScheduleDAG variants.
- Add `ScheduleDAG::dumpNodeName()` in favor of the `SUnit::print()`
functions. They were only ever used for debug dumping and putting the
function into ScheduleDAG is consistent with the `dumpNode()` change.
llvm-svn: 342520
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46290
llvm-svn: 331272
All these headers already depend on CodeGen headers so moving them into
CodeGen fixes the layering (since CodeGen depends on Target, not the
other way around).
llvm-svn: 318490
I did this a long time ago with a janky python script, but now
clang-format has built-in support for this. I fed clang-format every
line with a #include and let it re-sort things according to the precise
LLVM rules for include ordering baked into clang-format these days.
I've reverted a number of files where the results of sorting includes
isn't healthy. Either places where we have legacy code relying on
particular include ordering (where possible, I'll fix these separately)
or where we have particular formatting around #include lines that
I didn't want to disturb in this patch.
This patch is *entirely* mechanical. If you get merge conflicts or
anything, just ignore the changes in this patch and run clang-format
over your #include lines in the files.
Sorry for any noise here, but it is important to keep these things
stable. I was seeing an increasing number of patches with irrelevant
re-ordering of #include lines because clang-format was used. This patch
at least isolates that churn, makes it easy to skip when resolving
conflicts, and gets us to a clean baseline (again).
llvm-svn: 304787
- Fix doxygen comments (do not repeat documented name, remove definition
comment if there is already one at the declaration, add \p, ...)
- Add some const modifiers
- Use range based for
llvm-svn: 295688
The DAG mutators in the scheduler cannot really remove DAG nodes as
additional anlysis information such as ScheduleDAGToplogicalSort are
already computed at this point and rely on a fixed number of DAG nodes.
Alleviate the missing removal with a new flag: Setting the new skip
flag on a node ignores it during scheduling.
llvm-svn: 286655
Currently nodes_iterator may dereference to a NodeType* or a NodeType&. Make them all dereference to NodeType*, which is NodeRef later.
Differential Revision: https://reviews.llvm.org/D23704
Differential Revision: https://reviews.llvm.org/D23705
llvm-svn: 279326
Summary:
This is part of the "NodeType* -> NodeRef" migration. Notice that since
GraphWriter prints object address as identity, I added a static_assert on
NodeRef to be a pointer type.
Reviewers: dblaikie
Subscribers: llvm-commits, MatzeB
Differential Revision: https://reviews.llvm.org/D23580
llvm-svn: 278966
Recommited, after some fixing with test cases.
Updated test cases:
test/CodeGen/AArch64/arm64-misched-memdep-bug.ll
test/CodeGen/AArch64/tailcall_misched_graph.ll
Temporarily disabled test cases:
test/CodeGen/AMDGPU/split-vector-memoperand-offsets.ll
test/CodeGen/PowerPC/ppc64-fastcc.ll (partially updated)
test/CodeGen/PowerPC/vsx-fma-m.ll
test/CodeGen/PowerPC/vsx-fma-sp.ll
http://reviews.llvm.org/D8705
Reviewers: Hal Finkel, Andy Trick.
llvm-svn: 259673
The buildSchedGraph() was in need of reworking as the AA features had been
added on top of earlier code. It was very difficult to understand, and buggy.
There had been found cases where scheduling dependencies had actually been
missed (see r228686).
AliasChain, RejectMemNodes, adjustChainDeps() and iterateChainSucc() have
been removed. There are instead now just the four maps from Value to SUs, which
have been renamed to Stores, Loads, NonAliasStores and NonAliasLoads.
An unknown store used to become the AliasChain, but now becomes a store mapped
to 'unknownValue' (in Stores). What used to be PendingLoads is instead the
list of SUs mapped to 'unknownValue' in Loads.
RejectMemNodes and adjustChainDeps() used to be a safety-net for everything.
The SU maps were sometimes cleared and SUs were put in RejectMemNodes, where
adjustChainDeps() would look. Instead of this, a more straight forward approach
is used in maintaining the SU maps without clearing them and simply letting
them grow over time. Instead of the cutt-off in adjustChainDeps() search, a
reduction of maps will be done if needed (see below).
Each SUnit either becomes the BarrierChain, or is put into one of the maps. For
each SUnit encountered, all the information about previous ones are still
available until a new BarrierChain is set, at which point the maps are cleared.
For huge regions, the algorithm becomes slow, therefore the maps will get
reduced at a threshold (current default is 1000 nodes), by a fraction (default 1/2).
These values can be tuned by use of CL options in case some test case shows that
they need to be changed (-dag-maps-huge-region and -dag-maps-reduction-size).
There has not been any considerable change observed in output quality or compile
time. There may now be more DAG edges inserted than before (i.e. if A->B->C,
then A->C is not needed). However, in a comparison run there were fewer total
calls to AA, and a somewhat improved compile time, which means this seems to
be not a problem.
http://reviews.llvm.org/D8705
Reviewers: Hal Finkel, Andy Trick.
llvm-svn: 259201
inline definitions after the mutually recursive pair of types have been
defined. The two types mutually recurse specifically through
abstractions that require pointer traits which makes this kind of mutual
recursion especially tricky to get right in terms of ordering.
This is part of a series of patches to allow LLVM to check for complete
pointee types when computing its pointer traits. This is absolutely
necessary to get correct (or reproducible) results for things like how
many low bits are guaranteed to be zero.
llvm-svn: 256551
with the new pass manager, and no longer relying on analysis groups.
This builds essentially a ground-up new AA infrastructure stack for
LLVM. The core ideas are the same that are used throughout the new pass
manager: type erased polymorphism and direct composition. The design is
as follows:
- FunctionAAResults is a type-erasing alias analysis results aggregation
interface to walk a single query across a range of results from
different alias analyses. Currently this is function-specific as we
always assume that aliasing queries are *within* a function.
- AAResultBase is a CRTP utility providing stub implementations of
various parts of the alias analysis result concept, notably in several
cases in terms of other more general parts of the interface. This can
be used to implement only a narrow part of the interface rather than
the entire interface. This isn't really ideal, this logic should be
hoisted into FunctionAAResults as currently it will cause
a significant amount of redundant work, but it faithfully models the
behavior of the prior infrastructure.
- All the alias analysis passes are ported to be wrapper passes for the
legacy PM and new-style analysis passes for the new PM with a shared
result object. In some cases (most notably CFL), this is an extremely
naive approach that we should revisit when we can specialize for the
new pass manager.
- BasicAA has been restructured to reflect that it is much more
fundamentally a function analysis because it uses dominator trees and
loop info that need to be constructed for each function.
All of the references to getting alias analysis results have been
updated to use the new aggregation interface. All the preservation and
other pass management code has been updated accordingly.
The way the FunctionAAResultsWrapperPass works is to detect the
available alias analyses when run, and add them to the results object.
This means that we should be able to continue to respect when various
passes are added to the pipeline, for example adding CFL or adding TBAA
passes should just cause their results to be available and to get folded
into this. The exception to this rule is BasicAA which really needs to
be a function pass due to using dominator trees and loop info. As
a consequence, the FunctionAAResultsWrapperPass directly depends on
BasicAA and always includes it in the aggregation.
This has significant implications for preserving analyses. Generally,
most passes shouldn't bother preserving FunctionAAResultsWrapperPass
because rebuilding the results just updates the set of known AA passes.
The exception to this rule are LoopPass instances which need to preserve
all the function analyses that the loop pass manager will end up
needing. This means preserving both BasicAAWrapperPass and the
aggregating FunctionAAResultsWrapperPass.
Now, when preserving an alias analysis, you do so by directly preserving
that analysis. This is only necessary for non-immutable-pass-provided
alias analyses though, and there are only three of interest: BasicAA,
GlobalsAA (formerly GlobalsModRef), and SCEVAA. Usually BasicAA is
preserved when needed because it (like DominatorTree and LoopInfo) is
marked as a CFG-only pass. I've expanded GlobalsAA into the preserved
set everywhere we previously were preserving all of AliasAnalysis, and
I've added SCEVAA in the intersection of that with where we preserve
SCEV itself.
One significant challenge to all of this is that the CGSCC passes were
actually using the alias analysis implementations by taking advantage of
a pretty amazing set of loop holes in the old pass manager's analysis
management code which allowed analysis groups to slide through in many
cases. Moving away from analysis groups makes this problem much more
obvious. To fix it, I've leveraged the flexibility the design of the new
PM components provides to just directly construct the relevant alias
analyses for the relevant functions in the IPO passes that need them.
This is a bit hacky, but should go away with the new pass manager, and
is already in many ways cleaner than the prior state.
Another significant challenge is that various facilities of the old
alias analysis infrastructure just don't fit any more. The most
significant of these is the alias analysis 'counter' pass. That pass
relied on the ability to snoop on AA queries at different points in the
analysis group chain. Instead, I'm planning to build printing
functionality directly into the aggregation layer. I've not included
that in this patch merely to keep it smaller.
Note that all of this needs a nearly complete rewrite of the AA
documentation. I'm planning to do that, but I'd like to make sure the
new design settles, and to flesh out a bit more of what it looks like in
the new pass manager first.
Differential Revision: http://reviews.llvm.org/D12080
llvm-svn: 247167
The patch is generated using this command:
tools/clang/tools/extra/clang-tidy/tool/run-clang-tidy.py -fix \
-checks=-*,llvm-namespace-comment -header-filter='llvm/.*|clang/.*' \
llvm/lib/
Thanks to Eugene Kosov for the original patch!
llvm-svn: 240137
There doesn't seem to be any need to assert that iterator assignment is
between iterators over the same node - if you want to reuse an iterator
variable to iterate another node, that's perfectly acceptable. Just
don't mix comparisons between iterators into disjoint sequences, as
usual.
llvm-svn: 231134
Used to iterate over previously added memory dependencies in
adjustChainDeps() and iterateChainSucc().
SDep::isCtrl() was previously used in these places, that also gave
anti and output edges. The code may be worse if these are followed,
because MisNeedChainEdge() will conservatively return true since a
non-memory instruction has no memory operands, and a false chain dep
will be added. It is also unnecessary since all memory accesses of
interest will be reached by memory dependencies, and there is a budget
limit for the number of edges traversed.
This problem was found on an out-of-tree target with enabled alias
analysis. No test case for an in-tree target has been found.
Reviewed by Hal Finkel.
llvm-svn: 225351
SDep had is* functions for the other kinds of order dependencies (isMustAlias,
isWeak, isArtificial, etc.), but not for barrier. Upcoming commits in the
PowerPC backend will make use of this function.
llvm-svn: 197098
This allows a target to use MI-Sched as an in-order scheduler that
will model strict resource conflicts without defining a processor
itinerary. Instead, the target can now use the new per-operand machine
model and define in-order resources with BufferSize=0. For example,
this would allow restricting the type of operations that can be formed
into a dispatch group. (Normally NumMicroOps is sufficient to enforce
dispatch groups).
If the intent is to model latency in in-order pipeline, as opposed to
resource conflicts, then a resource with BufferSize=1 should be
defined instead.
This feature is only casually tested as there are no in-tree targets
using it yet. However, Hal will be experimenting with POWER7.
llvm-svn: 196517
Replace the ill-defined MinLatency and ILPWindow properties with
with straightforward buffer sizes:
MCSchedMode::MicroOpBufferSize
MCProcResourceDesc::BufferSize
These can be used to more precisely model instruction execution if desired.
Disabled some misched tests temporarily. They'll be reenabled in a few commits.
llvm-svn: 184032
For now, we just reschedule instructions that use the copied vregs and
let regalloc elliminate it. I would really like to eliminate the
copies on-the-fly during scheduling, but we need a complete
implementation of repairIntervalsInRange() first.
The general strategy is for the register coalescer to eliminate as
many global copies as possible and shrink live ranges to be
extended-basic-block local. The coalescer should not have to worry
about resolving local copies (e.g. it shouldn't attemp to reorder
instructions). The scheduler is a much better place to deal with local
interference. The coalescer side of this equation needs work.
llvm-svn: 180193
The register allocator expects minimal physreg live ranges. Schedule
physreg copies accordingly. This is slightly tricky when they occur in
the middle of the scheduling region. For now, this is handled by
rescheduling the copy when its associated instruction is
scheduled. Eventually we may instead bundle them, but only if we can
preserve the bundles as parallel copies during regalloc.
llvm-svn: 179449
