Order should match the sp3 syntax, where destination (simm16 denoting the hwreg) is coming first.
Differential Revision: http://reviews.llvm.org/D19161
llvm-svn: 266617
Currently what comes out of instruction selection is a
register initialized to -1, and then copied to m0.
MachineCSE doesn't consider copies, but we want these
to be CSEed. This isn't much of a problem currently,
because SIFoldOperands is run immediately after.
This avoids regressions when SIFoldOperands is run later
from leaving all copies to m0.
llvm-svn: 266377
Summary:
They correspond to BUFFER_LOAD/STORE_DWORD[_X2,X3,X4] and mostly behave like
llvm.amdgcn.buffer.load/store.format. They will be used by Mesa for SSBO and
atomic counters at least when robust buffer access behavior is desired.
(These instructions perform no format conversion and do buffer range checking
per component.)
As a side effect of sharing patterns with llvm.amdgcn.buffer.store.format,
it has become trivial to add support for the f32 and v2f32 variants of that
intrinsic, so the patch does so.
Also DAG-ify (and fix) some tests that I noticed intermittent failures in
while developing this patch.
Some tests were (temporarily) adjusted for the required mayLoad/hasSideEffects
changes to the BUFFER_STORE_DWORD* instructions. See also
http://reviews.llvm.org/D18291.
Reviewers: arsenm, tstellarAMD, mareko
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D18292
llvm-svn: 266126
Standard load/store instructions with GLC bit set.
Reviewers: tstellardAMD, arsenm
Differential Revision: http://reviews.llvm.org/D18760
llvm-svn: 265709
For VGPR_32 operand disassembler expects a VGPR register encoded as 0..255 (enum8 src operand).
readfirstlane/readline actually has enum9 operand and this change fixes VGPR_32 to VS_32 (enum9 encoding).
Differential Revision: http://reviews.llvm.org/D18696
llvm-svn: 265670
Summary:
Implement BUFFER_ATOMIC_CMPSWAP{,_X2} instructions on all GCN targets, and FLAT_ATOMIC_CMPSWAP{,_X2} on CI+.
32-bit instruction variants tested manually on Kabini and Bonaire. Tests and parts of code provided by Jan Veselý.
Patch by: Vedran Miletić
Reviewers: arsenm, tstellarAMD, nhaehnle
Subscribers: jvesely, scchan, kanarayan, arsenm
Differential Revision: http://reviews.llvm.org/D17280
llvm-svn: 265170
Summary:
Allow the selection of BUFFER_LOAD_FORMAT_x and _XY. Do this now before
the frontend patches land in Mesa. Eventually, we may want to automatically
reduce the size of loads at the LLVM IR level, which requires such overloads,
and in some cases Mesa can generate them directly.
Reviewers: tstellarAMD, arsenm
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D18255
llvm-svn: 263792
Summary:
These intrinsics expose the BUFFER_ATOMIC_* instructions and will be used
by Mesa to implement atomics with buffer semantics. The intrinsic interface
matches that of buffer.load.format and buffer.store.format, except that the
GLC bit is not exposed (it is automatically deduced based on whether the
return value is used).
The change of hasSideEffects is required for TableGen to accept the pattern
that matches the intrinsic.
Reviewers: tstellarAMD, arsenm
Subscribers: arsenm, rivanvx, llvm-commits
Differential Revision: http://reviews.llvm.org/D18151
llvm-svn: 263791
Summary:
We cannot easily deduce that an offset is in an SGPR, but the Mesa frontend
cannot easily make use of an explicit soffset parameter either. Furthermore,
it is likely that in the future, LLVM will be in a better position than the
frontend to choose an SGPR offset if possible.
Since there aren't any frontend uses of these intrinsics in upstream
repositories yet, I would like to take this opportunity to change the
intrinsic signatures to a single offset parameter, which is then selected
to immediate offsets or voffsets using a ComplexPattern.
Reviewers: arsenm, tstellarAMD, mareko
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D18218
llvm-svn: 263790
Summary:
Static LDS size is saved in MachineFunctionInfo::LDSSize,
We define a pseudo instruction with usesCustomInserter bit set. Then, in EmitInstrWithCustomInserter,
we replace this pseudo instruction with a mov of MachineFunctionInfo::LDSSize.
Reviewers:
arsenm
tstellarAMD
Subscribers
llvm-commits, arsenm
Differential Revision:
http://reviews.llvm.org/D18064
llvm-svn: 263563
s_bitset0_b64, s_bitset1_b64 has 32-bit src0, not 64-bit.
s_rfe_b64 has just one destination operand and no source.
Uncomment S_BITCMP* and S_SETVSKIP, adjust SOPC_* classes for that.
Add s_memrealtime test and change comments in smem.s to follow common style.
Change test for s_memtime to use non-zero register to make it really test encoding.
Add tests for s_buffer_load*.
Add tests for SOPC instructions (same for SI and VI)
Differential Revision: http://reviews.llvm.org/D18040
llvm-svn: 263420
The constant is now at source operand 1 (previously at 2).
This is also how it is in legacy AMD sp3 assembler.
Update tests.
Differential Revision: http://reviews.llvm.org/D17984
llvm-svn: 263212
Summary:
They correspond to BUFFER_LOAD/STORE_FORMAT_XYZW and will be used by Mesa
to implement the GL_ARB_shader_image_load_store extension.
The intention is that for llvm.amdgcn.buffer.load.format, LLVM will decide
whether one of the _X/_XY/_XYZ opcodes can be used (similar to image sampling
and loads). However, this is not currently implemented.
For llvm.amdgcn.buffer.store, LLVM cannot decide to use one of the "smaller"
opcodes and therefore the intrinsic is overloaded. Currently, only the v4f32
is actually implemented since GLSL also only has a vec4 variant of the store
instructions, although it's conceivable that Mesa will want to be smarter
about this in the future.
BUFFER_LOAD_FORMAT_XYZW is already exposed via llvm.SI.vs.load.input, which
has a legacy name, pretends not to access memory, and does not capture the
full flexibility of the instruction.
Reviewers: arsenm, tstellarAMD, mareko
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D17277
llvm-svn: 263140
s_setpc_b64 has just one 64-bit source which is the address of instruction to jump to.
Differential Revision: http://reviews.llvm.org/D17888
llvm-svn: 263005
Summary:
This is necessary for when we run out of VGPRs and can no
longer use v_{read,write}_lane for spilling SGPRs.
Reviewers: arsenm
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D17592
llvm-svn: 262732
These correspond to IMAGE_ATOMIC_* and are going to be used by Mesa for the
GL_ARB_shader_image_load_store extension.
Initial change by Nicolai H.hnle
Differential Revision: http://reviews.llvm.org/D17401
llvm-svn: 262701
This matches the behavior of the HSAIL clock instruction.
s_realmemtime is used if the subtarget supports it, and falls
back to s_memtime if not.
Also introduces new intrinsics for each of s_memtime / s_memrealtime.
llvm-svn: 262119
Add parsing and printing of image operands. Matches legacy sp3 assembler.
Change image instruction order to have data/image/sampler operands in the beginning. This is needed because optional operands in MC are always last.
Update SITargetLowering for new order.
Add basic MC test.
Update CodeGen tests.
Review: http://reviews.llvm.org/D17574
llvm-svn: 261995
Resubmit with index problem fixed. Verified with valgrind.
Prepare to support DPP encodings.
For DPP encodings, we want row_mask/bank_mask/bound_ctrl to be optional operands.
However this means that when parsing instruction which has no mnemonic prefix,
we cannot add both default values for VOP3 and for DPP optional operands
to OperandVector - neither instructions would match. So add default values
for optional operands to MCInst during conversion instead.
Mark more operands as IsOptional = 1 in .td files.
Do not add default values for optional operands to OperandVector in AMDGPUAsmParser.
Add default values for optional operands during conversion using new helper addOptionalImmOperand.
Change to cvtVOP3_2_mod to check instruction flag instead of presence of modifiers. In the future, cvtVOP3* functions can be combined into one.
Separate cvtFlat and cvtFlatAtomic.
Fix CNDMASK_B32 definition to have no modifiers.
Review: http://reviews.llvm.org/D17445
llvm-svn: 261856
Prepare to support DPP encodings.
For DPP encodings, we want row_mask/bank_mask/bound_ctrl to be optional operands. However this means that when parsing instruction which has no mnemonic prefix, we cannot add both default values for VOP3 and for DPP optional operands to OperandVector - neither instructions would match. So add default values for optional operands to MCInst during conversion instead.
Mark more operands as IsOptional = 1 in .td files.
Do not add default values for optional operands to OperandVector in AMDGPUAsmParser.
Add default values for optional operands during conversion using new helper addOptionalImmOperand.
Change to cvtVOP3_2_mod to check instruction flag instead of presence of modifiers. In the future, cvtVOP3* functions can be combined into one.
Separate cvtFlat and cvtFlatAtomic.
Fix CNDMASK_B32 definition to have no modifiers.
Review: http://reviews.llvm.org/D17445
Reviewers: tstellarAMD
llvm-svn: 261742
src1 of s_bfe_u64 is 32-bit (same as s_bfe_i64).
src0 and src1 of s_bfm_b64 are 32-bit.
Update tests.
Review: http://reviews.llvm.org/D17480
Reviewers: arsenm
llvm-svn: 261621
Summary:
These correspond to IMAGE_LOAD/STORE[_MIP] and are going to be used by Mesa
for the GL_ARB_shader_image_load_store extension.
IMAGE_LOAD is already matched by llvm.SI.image.load. That intrinsic has
a legacy name and pretends not to read memory.
Differential Revision: http://reviews.llvm.org/D17276
llvm-svn: 261224
Changes:
- Added disassembler project
- Fixed all decoding conflicts in .td files
- Added DecoderMethod=“NONE” option to Target.td that allows to
disable decoder generation for an instruction.
- Created decoding functions for VS_32 and VReg_32 register classes.
- Added stubs for decoding all register classes.
- Added several tests for disassembler
Disassembler only supports:
- VI subtarget
- VOP1 instruction encoding
- 32-bit register operands and inline constants
[Valery]
One of the point that requires to pay attention to is how decoder
conflicts were resolved:
- Groups of target instructions were separated by using different
DecoderNamespace (SICI, VI, CI) using similar to AssemblerPredicate
approach.
- There were conflicts in IMAGE_<> instructions caused by two
different reasons:
1. dmask wasn’t specified for the output (fixed)
2. There are image instructions that differ only by the number of
the address components but have the same encoding by the HW spec. The
actual number of address components is determined by the HW at runtime
using image resource descriptor starting from the VGPR encoded in an
IMAGE instruction. This means that we should choose only one instruction
from conflicting group to be the rule for decoder. I didn’t find the way
to disable decoder generation for an arbitrary instruction and therefore
made a onelinear fix to tablegen generator that would suppress decoder
generation when DecoderMethod is set to “NONE”. This is a change that
should be reviewed and submitted first. Otherwise I would need to
specify different DecoderNamespace for every instruction in the
conflicting group. I haven’t checked yet if DecoderMethod=“NONE” is not
used in other targets.
3. IMAGE_GATHER decoder generation is for now disabled and to be
done later.
[/Valery]
Patch By: Sam Kolton
Differential Revision: http://reviews.llvm.org/D16723
llvm-svn: 261185
Summary: This change renames output operand for VOP instructions from dst to vdst. This is needed to enable decoding named operands for disassembler.
Reviewers: vpykhtin, tstellarAMD, arsenm
Subscribers: arsenm, llvm-commits, nhaustov
Projects: #llvm-amdgpu-spb
Differential Revision: http://reviews.llvm.org/D16920
llvm-svn: 260986
Summary:
Added support for "VOP3Only" attribute in VOP3bInst encoding.
Set VOP3Only=1 for V_DIV_SCALE_F64/32 insns.
Added support for multi-dest instructions in AMDGPUAs::cvt*().
Added lit test for "V_DIV_SCALE_F64|F32 vreg,vcc|sreg,vreg,vreg,vreg".
Reviewers: tstellarAMD, arsenm
Subscribers: arsenm, SamWot, nhaustov, vpykhtin
Differential Revision: http://reviews.llvm.org/D16995
Patch By: Artem Tamazov
llvm-svn: 260560
Separate methods to convert parsed instructions to MCInst:
- VOP3 only instructions (always create modifiers as operands in MCInst)
- VOP2 instrunctions with modifiers (create modifiers as operands
in MCInst when e64 encoding is forced or modifiers are parsed)
- VOP2 instructions without modifiers (do not create modifiers
as operands in MCInst)
- Add VOP3Only flag. Pass HasMods flag to VOP3Common.
- Simplify code that deals with modifiers (-1 is now same as
0). This is no longer needed.
- Add few tests (more will be added separately).
Update error message now correct.
Patch By: Nikolay Haustov
Differential Revision: http://reviews.llvm.org/D16778
llvm-svn: 260483
Make comments and indentation more consistent.
Rearrange a few things to be in a more consistent order,
such as organizing subtarget features from those describing
an actual device property, and those used as options.
llvm-svn: 258789
I did my best to try to update all the uses in tests that
just happened to use the old ones to the newer intrinsics.
I'm not sure I got all of the immediate operand conversions
correct, since the value seems to have been ignored by the
old pattern but I don't think it really matters.
llvm-svn: 258787
The hardware instruction's output on 0 is -1 rather than 32.
Eliminate a test and select to -1. This removes an extra instruction
from the compatability function with HSAIL's firstbit instruction.
llvm-svn: 257352
Summary:
We were previously selecting all constant loads to SMRD instructions and legalizing
the SMRDs with non-uniform addresses during the SIFixSGPRCopesPass.
This new solution is more simple and also generates much better code, because
the instruction selector is able to take advantage of all the MUBUF addressing
modes that are legalization pass wasn't able to.
We also no longer need to generate v_add_* instructions when we
have a uniform pointer and a non-uniform offset, as this is now folded into the
MUBUF instruction during instruction selection.
Reviewers: arsenm
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D15425
llvm-svn: 255672
The radeonsi fp64 support can hit these now that some redundant bitcasts
are folded.
Patch by: Michel Dänzer
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
llvm-svn: 255657
Summary:
These are meant to be used instead of the llvm.SI.tid intrinsic which will
be deprecated at some point.
Reviewers: arsenm
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D15475
llvm-svn: 255652
These are redundant pairs of nodes defined for
INSERT_VECTOR_ELEMENT/EXTRACT_VECTOR_ELEMENT.
insertelement/extractelement are slightly closer to the corresponding
C++ node name, and has stricter type checking so prefer it.
Update targets to only use these nodes where it is trivial to do so.
AArch64, ARM, and Mips all have various type errors on simple replacement,
so they will need work to fix.
Example from AArch64:
def : Pat<(sext_inreg (vector_extract (v16i8 V128:$Rn), VectorIndexB:$idx), i8),
(i32 (SMOVvi8to32 V128:$Rn, VectorIndexB:$idx))>;
Which is trying to do sext_inreg i8, i8.
llvm-svn: 255359
Summary:
This allows us to remove the END_OF_TEXT_LABEL hack we had been using
and simplifies the fixups used to compute the address of constant
arrays.
Reviewers: arsenm
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D15257
llvm-svn: 255204
v2: added more tests, moved the SALU->VALU conversion to a separate function
It looks like it's not possible to get subregisters in the S_ABS lowering
code, and I don't feel like guessing without testing what the correct code
would look like.
llvm-svn: 254095
Summary:
Pass the VOPProfile object all the through to *_m multiclasses. This will
allow us to do more simplifications in the future.
Reviewers: arsenm
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D13437
llvm-svn: 252339
This stops using an unknown reg class operand.
Currently build_vector selection has a broken looking check
where it tries to use a VGPR reg class and an SGPR one if it
sees an SGPR use.
With the source operand has an explicit VGPR class,
illegal copies will be inserted that SIFixSGPRCopies will take care
of normally later, which will allow removing the weird check
of build_vector users. Without this, when removed v_movrels_b32 would
still be emitted even though all of the values were only stored in
SGPRs.
llvm-svn: 249494
Summary:
The assembly printing of these is still missing the encoding size
suffix, but this will be fixed in a later commit.
Reviewers: arsenm
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D13436
llvm-svn: 249424
These are necessary for implementing mem_fence for
OpenCL 2.0.
The VI assembler tests are disabled since it seems to be
using the wrong encoding or opcode.
llvm-svn: 248532
Adds vcc to output string input for e32. Allows option
of using e64 encoding with assembler.
Also fixes these instructions not implicitly reading exec.
llvm-svn: 247074
These were marked as WriteSALU, which is low latency.
I'm guessing at the value to use, but it should probably
be considered the highest latency instruction.
I'm not sure this has any actual effect since hasSideEffects
probably is preventing any moving of these.
llvm-svn: 247060
The VOP3 encoding of these allows any SGPR pair for the i1
output, but this was forced before to always use vcc.
This doesn't yet try to use this, but does add the operand
to the definitions so the main change is adding vcc to the
output of the VOP2 encoding.
llvm-svn: 246358
There is no context where s_mov_b64 is emitted
and could potentially be moved to the VALU.
It is currently only emitted for materializing
immediates, which can't be dependent on vector sources.
The immediate splitting is already done when selecting
constants. I'm not sure what contexts if any the register
splitting would have been used before.
Also clean up using s_mov_b64 in place of v_mov_b64_pseudo,
although this isn't required and just skips the extra step
of eliminating the copy from the SReg_64.
llvm-svn: 246080
Although the basic s_load_* instructions happen to use the same
opcode, some of the special case SMRD instructions have
different opcodes.
llvm-svn: 245775
Summary: This allows us to consolidate several of the TableGen patterns.
Reviewers: arsenm
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11602
llvm-svn: 244253
Author: Dave Airlie <airlied@redhat.com>
In order to implement indirect sampler loads, we don't
want to match on a VGPR load but an SGPR one for constants,
as we cannot feed VGPRs to the sampler only SGPRs.
this should be applicable for llvm 3.7 as well.
llvm-svn: 243294
The two-address instruction pass will convert these back to v_mad_f32
if necessary.
Differential Revision: http://reviews.llvm.org/D11060
llvm-svn: 242038
