match splats in the form (splat (scalar_to_vector (load ...))) whenever
the load can be folded. All the logic and instruction emission is
working but because of PR8156, there are no ways to match loads, cause
they can never be folded for splats. Thus, the tests are XFAILed, but
I've tested and exercised all the logic using a relaxed version for
checking the foldable loads, as if the bug was already fixed. This
should work out of the box once PR8156 gets fixed since MayFoldLoad will
work as expected.
llvm-svn: 137810
vinsertf128 $1 + vpermilps $0, remove the old code that used to first
do the splat in a 128-bit vector and then insert it into a larger one.
This is better because the handling code gets simpler and also makes a
better room for the upcoming vbroadcast!
llvm-svn: 137807
making random bad assumptions about instructions which are not explicitly listed.
Includes fix for rdar://9956541, a version of "undef ^ undef should return
0 because it's easier than arguing with users".
llvm-svn: 137777
Thumb one requires that many arithmetic instruction forms have an 'S'
suffix. For Thumb2, the whether the suffix is required or precluded depends
on whether the instruction is in an IT block. Use target parser predicates
to check for these sorts of context-sensitive constraints.
llvm-svn: 137746
there is no support for native 256-bit shuffles, be more smart in some
cases, for example, when you can extract specific 128-bit parts and use
regular 128-bit shuffles for them. Example:
For this shuffle:
shufflevector <4 x i64> %a, <4 x i64> %b, <4 x i32>
<i32 1, i32 0, i32 7, i32 6>
This was expanded to:
vextractf128 $1, %ymm1, %xmm2
vpextrq $0, %xmm2, %rax
vmovd %rax, %xmm1
vpextrq $1, %xmm2, %rax
vmovd %rax, %xmm2
vpunpcklqdq %xmm1, %xmm2, %xmm1
vpextrq $0, %xmm0, %rax
vmovd %rax, %xmm2
vpextrq $1, %xmm0, %rax
vmovd %rax, %xmm0
vpunpcklqdq %xmm2, %xmm0, %xmm0
vinsertf128 $1, %xmm1, %ymm0, %ymm0
ret
Now we get:
vshufpd $1, %xmm0, %xmm0, %xmm0
vextractf128 $1, %ymm1, %xmm1
vshufpd $1, %xmm1, %xmm1, %xmm1
vinsertf128 $1, %xmm1, %ymm0, %ymm0
llvm-svn: 137733
Mips1 does not support double precision loads or stores, therefore two single
precision loads or stores must be used in place of these instructions. This
patch treats double precision loads and stores as if they are legal
instructions until MCInstLowering, instead of generating the single precision
instructions during instruction selection or Prolog/Epilog code insertion.
Without the changes made in this patch, llc produces code that has the same
problem described in r137484 or bails out when
MipsInstrInfo::storeRegToStackSlot or loadRegFromStackSlot is called before
register allocation.
llvm-svn: 137711
This commit includes a mention of the landingpad instruction, but it's not
changing the behavior around it. I think the current behavior is correct,
though. Bill, can you double-check that?
llvm-svn: 137691
Apparently we never added code to expand these pseudo instructions, and in
over a year, no one has noticed. Our register allocator must be awesome!
llvm-svn: 137551
of the instruction.
Note that this change affects the existing non-atomic load and store
instructions; the parser now accepts both forms, and the change is noted
in the release notes.
llvm-svn: 137527
vectors. It operates on 128-bit elements instead of regular scalar
types. Recognize shuffles that are suitable for VPERM2F128 and teach
the x86 legalizer how to handle them.
llvm-svn: 137519
the retains and releases all use the same SSA pointer value.
Also, don't let CFG hazards disrupt nested retain+release pair
optimizations.
llvm-svn: 137399
SCEV unrolling can unroll loops with arbitrary induction variables. It
is a prerequisite for -disable-iv-rewrite performance. It is also
easily handles loops of arbitrary structure including multiple exits
and is generally more robust.
This is under a temporary option to avoid affecting default
behavior for the next couple of weeks. It is needed so that I can
checkin unit tests for updateUnloop.
llvm-svn: 137384
(for example, after integer operation), do not pack the registers into a YMM
before saving. Its better to save as two XMM registers.
Before:
vinsertf128 $1, %xmm3, %ymm0, %ymm3
vinsertf128 $0, %xmm1, %ymm3, %ymm1
vmovaps %ymm1, 416(%rsp)
After:
vmovaps %xmm3, 416+16(%rsp)
vmovaps %xmm1, 416(%rsp)
llvm-svn: 137308
data in-register prior to saving to memory. When we reorder the data in memory
we prevent the need to save multiple scalars to memory, making a single regular
store.
llvm-svn: 137238
def : Pat<(X86Movss VR128:$src1,
(bc_v4i32 (v2i64 (load addr:$src2)))),
(MOVLPSrm VR128:$src1, addr:$src2)>;
This matches a MOVSS dag with a MOVLPS instruction. However, MOVSS will replace only the low 32 bits of the register, while the MOVLPS instruction will replace the low 64 bits. A testcase is added and illustrates the bug and also modified the one that was already present. Patch by Tanya Lattner.
llvm-svn: 137227
These are not individual bug fixes. I had to rewrite a good chunk of
the unroller to make it sane. I think it was getting lucky on trivial
completely unrolled loops with no early exits. I included some fairly
simple unit tests for partial unrolling. I didn't do much stress
testing, so it may not be perfect, but should be usable now.
llvm-svn: 137190
This new disassembler can correctly decode all the testcases that the old one did, though
some "expected failure" testcases are XFAIL'd for now because it is not (yet) as strict in
operand checking as the old one was.
llvm-svn: 137144
Coalescing can remove copy-like instructions with sub-register operands
that constrained the register class. Examples are:
x86: GR32_ABCD:sub_8bit_hi -> GR32
arm: DPR_VFP2:ssub0 -> DPR
Recompute the register class of any virtual registers that are used by
less instructions after coalescing.
This affects code generation for the Cortex-A8 where we use NEON
instructions for f32 operations, c.f. fp_convert.ll:
vadd.f32 d16, d1, d0
vcvt.s32.f32 d0, d16
The register allocator is now free to use d16 for the temporary, and
that comes first in the allocation order because it doesn't interfere
with any s-registers.
llvm-svn: 137133
X86FloatingPoint keeps track of pending ST registers for an upcoming
inline asm instruction with fixed stack register constraints. It does
this by remembering which FP register holds the value that should appear
at a fixed stack position for the inline asm.
When that FP register is killed before the inline asm, make sure to
duplicate it to a scratch register, so the ST register still has a live
FP reference.
This could happen when the same FP register was copied to two ST
registers, or when a spill instruction is inserted between the ST copy
and the inline asm.
This fixes PR10602.
llvm-svn: 137050
recurrence, the initial values low bits can sometimes be ignored.
To take advantage of this, added FoldIVUser to IndVarSimplify to fold
an IV operand into a udiv/lshr if the operator doesn't affect the
result.
-indvars -disable-iv-rewrite now transforms
i = phi i4
i1 = i0 + 1
idx = i1 >> (2 or more)
i4 = i + 4
into
i = phi i4
idx = i0 >> ...
i4 = i + 4
llvm-svn: 137013
More parsing support for indexed loads. Fix pre-indexed with writeback
parsing for register offsets and handle basic post-indexed offsets.
llvm-svn: 136982
Memory operand parsing is a bit haphazzard at the moment, in no small part
due to the even more haphazzard representations of memory operands in the .td
files. Start cleaning that all up, at least a bit.
The addressing modes in the .td files will be being simplified to not be
so monolithic, especially with regards to immediate vs. register offsets
and post-indexed addressing. addrmode3 is on its way with this patch, for
example.
This patch is foundational to enable going back to smaller incremental patches
for the individual memory referencing instructions themselves. It does just
enough to get the basics in place and handle the "make check" regression tests
we already have.
Follow-up work will be fleshing out the details and adding more robust test
cases for the individual instructions, starting with ARM mode and moving from
there into Thumb and Thumb2.
llvm-svn: 136845
Don't replace a gep/bitcast with 'undef' because that will form a "free(undef)"
which in turn means "unreachable". What we wanted was a no-op. Instead, analyze
the whole tree and look for all the instructions we need to delete first, then
delete them second, not relying on the use_list to stay consistent.
llvm-svn: 136752
avoid returning early for v8i32 types, which would only be valid for
vector with all zeros. Also split the handling of zeros and ones into separate
checking logic since they are handled differently. This fixes PR10547
llvm-svn: 136642
This includes registers like EFLAGS and ST0-ST7. We don't check for
liveness issues in the verifier and scavenger because registers will
never be allocated from these classes.
While in SSA form, we do care about the liveness of unallocatable
unreserved registers. Liveness of EFLAGS and ST0 neds to be correct for
MachineDCE and MachineSinking.
llvm-svn: 136541
Fix the instruction encoding for operands. Refactor mode to use explicit
instruction definitions per FIXME to be more consistent with loads/stores.
Fix disassembler accordingly. Add tests.
llvm-svn: 136509
Fill in the missing fixed bits and the register operand bits of the instruction
encoding. Refactor the definition to make the mode explicit, which is
consistent with how loads and stores are normally represented and makes
parsing much easier. Add parsing aliases for pseudo-instruction variants.
Update the disassembler for the new representations. Add tests for parsing and
encoding.
llvm-svn: 136479
This hidden llc option runs the machine code verifier after expanding
ARM pseudo-instructions, but before if-conversion.
The machine code verifier is much better at pointing out liveness errors
that can trip up the register scavenger.
llvm-svn: 136439
Add parsing support for BLX (immediate). Since the register operand version is
predicated and the label operand version is not, we have to use some special
handling to get the operand list right for matching.
llvm-svn: 136406