Summary:
But still handle them the same way since I don't know how they differ on
this target.
Of these, 'o' and 'v' are not tested but were already implemented.
I'm not sure why 'i' is required for X86 since it's supposed to be an
immediate constraint rather than a memory constraint. A test asserts
without it so I've included it for now.
No functional change intended.
Reviewers: nadav
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8254
llvm-svn: 237517
Other pieces of CodeGen want to negate frame object offsets to account
for architectures where the stack grows down. Our object is a pseudo
object so it's offset doesn't matter. However, we shouldn't choose an
offset which results in undefined behavior if you negate it.
llvm-svn: 237474
i1 type is a legal type on AVX-512 and can be passed as parameter or return value.
i1 is promoted to i8 on return and to i32 for call arguments (i8 is also promoted to i32 here).
The result code is similar to the previous X86 targets, where i1 is allways promoted to i8.
llvm-svn: 237350
Previously, subtarget features were a bitfield with the underlying type being uint64_t.
Since several targets (X86 and ARM, in particular) have hit or were very close to hitting this bound, switching the features to use a bitset.
No functional change.
The first two times this was committed (r229831, r233055), it caused several buildbot failures.
At least some of the ARM and MIPS ones were due to gcc/binutils issues, and should now be fixed.
llvm-svn: 237234
Summary:
This change adds two new parameters to the statepoint intrinsic, `i64 id`
and `i32 num_patch_bytes`. `id` gets propagated to the ID field
in the generated StackMap section. If the `num_patch_bytes` is
non-zero then the statepoint is lowered to `num_patch_bytes` bytes of
nops instead of a call (the spill and reload code remains unchanged).
A non-zero `num_patch_bytes` is useful in situations where a language
runtime requires complete control over how a call is lowered.
This change brings statepoints one step closer to patchpoints. With
some additional work (that is not part of this patch) it should be
possible to get rid of `TargetOpcode::STATEPOINT` altogether.
PlaceSafepoints generates `statepoint` wrappers with `id` set to
`0xABCDEF00` (the old default value for the ID reported in the stackmap)
and `num_patch_bytes` set to `0`. This can be made more sophisticated
later.
Reviewers: reames, pgavlin, swaroop.sridhar, AndyAyers
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9546
llvm-svn: 237214
Summary:
This rule was always in the old SysV i386 ABI docs and the new ones that
H.J. Lu has put together, but we never noticed:
EAX scratch register; also used to return integer and pointer values
from functions; also stores the address of a returned struct or union
Fixes PR23491.
Reviewers: majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9715
llvm-svn: 237175
The other changes in the LowerShift() are not functional,
just to make the code more convenient.
So, the functional changes for SKX only.
llvm-svn: 237129
Before revision 171146, function 'PerformTruncateCombine' used to perform
a premature lowering of TRUNCATE dag nodes.
Revision 171146 then moved all the logic implemented by PerformTruncateCombine
to a custom lowering hook. However, that revision forgot to delete
function PerformTruncateCombine from the code.
This patch removes function 'PerformTruncateCombine' since it has no effect
on the SelectionDAG. No functional change intended.
llvm-svn: 237122
The X86-specific DAGCombine for stores should not assume vector types are always simple.
This fixes PR23476.
Differential Revision: http://reviews.llvm.org/D9659
llvm-svn: 237097
to use the information in the module rather than TargetOptions.
We've had and clang has used the use-soft-float attribute for some
time now so have the backends set a subtarget feature based on
a particular function now that subtargets are created based on
functions and function attributes.
For the one middle end soft float check go ahead and create
an overloadable TargetLowering::useSoftFloat function that
just checks the TargetSubtargetInfo in all cases.
Also remove the command line option that hard codes whether or
not soft-float is set by using the attribute for all of the
target specific test cases - for the generic just go ahead and
add the attribute in the one case that showed up.
llvm-svn: 237079
Summary:
r235215 adds support for f16 to be considered as a load/store type and
promote f16 operations to f32.
This patch has miscellaneous fixes for the X86 backend so all f16
operations are handled:
1. Set loadextaction for f16 vectors to expand.
2. Handle FP_EXTEND in a switch statement when handling v2f32
3. Do not fold (FP_TO_SINT (load f16)) into FP_TO_INT*_IN_MEM or
(store (SINT_TO_FP )) to a FILD.
Tests included.
Reviewers: ab, srhines, delena
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9092
llvm-svn: 237004
The code that builds the dependence graph assumes that two PseudoSourceValues
don't alias. In a tail calling function two FixedStackObjects might refer to the
same location. Worse 'immutable' fixed stack objects like function arguments are
not immutable and will be clobbered.
Change this so that a load from a FixedStackObject is not invariant in a tail
calling function and don't return a PseudoSourceValue for an instruction in tail
calling functions when building the dependence graph so that we handle function
arguments conservatively.
Fix for PR23459.
rdar://20740035
llvm-svn: 236916
A trunc from i32 to i1 on x86_64 generates an instruction such as
%vreg19<def> = COPY %vreg9:sub_8bit<kill>; GR8:%vreg19 GR32:%vreg9
However, the copy here should only have the kill flag on the 32-bit path, not the 64-bit one.
Otherwise, we are killing the source of the truncate which could be used later in the program.
llvm-svn: 236890
This changes the shape of the statepoint intrinsic from:
@llvm.experimental.gc.statepoint(anyptr target, i32 # call args, i32 unused, ...call args, i32 # deopt args, ...deopt args, ...gc args)
to:
@llvm.experimental.gc.statepoint(anyptr target, i32 # call args, i32 flags, ...call args, i32 # transition args, ...transition args, i32 # deopt args, ...deopt args, ...gc args)
This extension offers the backend the opportunity to insert (somewhat) arbitrary code to manage the transition from GC-aware code to code that is not GC-aware and back.
In order to support the injection of transition code, this extension wraps the STATEPOINT ISD node generated by the usual lowering lowering with two additional nodes: GC_TRANSITION_START and GC_TRANSITION_END. The transition arguments that were passed passed to the intrinsic (if any) are lowered and provided as operands to these nodes and may be used by the backend during code generation.
Eventually, the lowering of the GC_TRANSITION_{START,END} nodes should be informed by the GC strategy in use for the function containing the intrinsic call; for now, these nodes are instead replaced with no-ops.
Differential Revision: http://reviews.llvm.org/D9501
llvm-svn: 236888
The function 'getTargetShuffleMask' already knows how to deal with PSHUFB nodes
where the mask node is a load from constant pool, and the constant pool node
is wrapped by a X86ISD::Wrapper node. This patch extends that logic by teaching
it how to also look through X86ISD::WrapperRIP.
This helps function combineX86ShufflesRecusively to combine more shuffle
sequences containing PSHUFB nodes if we are in RIPRel PIC mode.
Before this change, llc (with -relocation-model=pic -march=x86-64) was unable
to decode a pshufb where the mask was loaded from a constant pool. For example,
the no-op shuffle from test 'x86-fold-pshufb.ll' was not folded into its
operand, so instead of generating a single 'movaps' the backend always
generated a sub-optimal 'movdqa + pshufb' sequence.
Added test x86-fold-pshufb.ll.
llvm-svn: 236863
This is a follow-on to r236740 where I took Andrea's advice
in D9504 to remove a redundant pattern...except that I removed
the wrong pattern!
AFAICT, there is no change in the final code produced because
subsequent passes would clean up the extra instructions created
by the more complicated pattern.
llvm-svn: 236743
Finish the job that was abandoned in D6958 following the refactoring in
http://reviews.llvm.org/rL230221:
1. Uncomment the intrinsic def for the AVX r_Int instruction.
2. Add missing r_Int entries to the load folding tables; there are already
tests that check these in "test/Codegen/X86/fold-load-unops.ll", so I
haven't added any more in this patch.
3. Add patterns to solve PR21507 ( https://llvm.org/bugs/show_bug.cgi?id=21507 ).
So instead of this:
movaps %xmm0, %xmm1
rcpss %xmm1, %xmm1
movss %xmm1, %xmm0
We should now get:
rcpss %xmm0, %xmm0
And instead of this:
vsqrtss %xmm0, %xmm0, %xmm1
vblendps $1, %xmm1, %xmm0, %xmm0 ## xmm0 = xmm1[0],xmm0[1,2,3]
We should now get:
vsqrtss %xmm0, %xmm0, %xmm0
Differential Revision: http://reviews.llvm.org/D9504
llvm-svn: 236740
Added intrinsics for the instructions. CC parameter of the intrinsics was changed from i8 to i32 according to the spec.
By Igor Breger (igor.breger@intel.com)
llvm-svn: 236714
When folding a load in to another instruction, we need to fix the class of the index register
Otherwise, it could be something like GR64 not GR64_NOSP and would fail the machine verifier.
llvm-svn: 236644
The patch disabled unrolling in loop vectorization pass when VF==1 on x86 architecture,
by setting MaxInterleaveFactor to 1. Unrolling in loop vectorization pass may introduce
the cost of overflow check, memory boundary check and extra prologue/epilogue code when
regular unroller will unroll the loop another time. Disable it when VF==1 remove the
unnecessary cost on x86. The same can be done for other platforms after verifying
interleaving/memory bound checking to be not perf critical on those platforms.
Differential Revision: http://reviews.llvm.org/D9515
llvm-svn: 236613
This patch adds the minimum plumbing necessary to use IR-level
fast-math-flags (FMF) in the backend without actually using
them for anything yet. This is a follow-on to:
http://reviews.llvm.org/rL235997
...which split the existing nsw / nuw / exact flags and FMF
into their own struct.
There are 2 structural changes here:
1. The main diff is that we're preparing to extend the optimization
flags to affect more than just binary SDNodes. Eg, IR intrinsics
( https://llvm.org/bugs/show_bug.cgi?id=21290 ) or non-binop nodes
that don't even exist in IR such as FMA, FNEG, etc.
2. The other change is that we're actually copying the FP fast-math-flags
from the IR instructions to SDNodes.
Differential Revision: http://reviews.llvm.org/D8900
llvm-svn: 236546
This reverts commit r236360.
This change exposed a bug in WinEHPrepare by opting win32 code into EH
preparation. We already knew that WinEHPrepare has bugs, and is the
status quo for x64, so I don't think that's a reason to hold off on this
change. I disabled exceptions in the sanitizer tests in r236505 and an
earlier revision.
llvm-svn: 236508
This patch introduces a new pass that computes the safe point to insert the
prologue and epilogue of the function.
The interest is to find safe points that are cheaper than the entry and exits
blocks.
As an example and to avoid regressions to be introduce, this patch also
implements the required bits to enable the shrink-wrapping pass for AArch64.
** Context **
Currently we insert the prologue and epilogue of the method/function in the
entry and exits blocks. Although this is correct, we can do a better job when
those are not immediately required and insert them at less frequently executed
places.
The job of the shrink-wrapping pass is to identify such places.
** Motivating example **
Let us consider the following function that perform a call only in one branch of
a if:
define i32 @f(i32 %a, i32 %b) {
%tmp = alloca i32, align 4
%tmp2 = icmp slt i32 %a, %b
br i1 %tmp2, label %true, label %false
true:
store i32 %a, i32* %tmp, align 4
%tmp4 = call i32 @doSomething(i32 0, i32* %tmp)
br label %false
false:
%tmp.0 = phi i32 [ %tmp4, %true ], [ %a, %0 ]
ret i32 %tmp.0
}
On AArch64 this code generates (removing the cfi directives to ease
readabilities):
_f: ; @f
; BB#0:
stp x29, x30, [sp, #-16]!
mov x29, sp
sub sp, sp, #16 ; =16
cmp w0, w1
b.ge LBB0_2
; BB#1: ; %true
stur w0, [x29, #-4]
sub x1, x29, #4 ; =4
mov w0, wzr
bl _doSomething
LBB0_2: ; %false
mov sp, x29
ldp x29, x30, [sp], #16
ret
With shrink-wrapping we could generate:
_f: ; @f
; BB#0:
cmp w0, w1
b.ge LBB0_2
; BB#1: ; %true
stp x29, x30, [sp, #-16]!
mov x29, sp
sub sp, sp, #16 ; =16
stur w0, [x29, #-4]
sub x1, x29, #4 ; =4
mov w0, wzr
bl _doSomething
add sp, x29, #16 ; =16
ldp x29, x30, [sp], #16
LBB0_2: ; %false
ret
Therefore, we would pay the overhead of setting up/destroying the frame only if
we actually do the call.
** Proposed Solution **
This patch introduces a new machine pass that perform the shrink-wrapping
analysis (See the comments at the beginning of ShrinkWrap.cpp for more details).
It then stores the safe save and restore point into the MachineFrameInfo
attached to the MachineFunction.
This information is then used by the PrologEpilogInserter (PEI) to place the
related code at the right place. This pass runs right before the PEI.
Unlike the original paper of Chow from PLDI’88, this implementation of
shrink-wrapping does not use expensive data-flow analysis and does not need hack
to properly avoid frequently executed point. Instead, it relies on dominance and
loop properties.
The pass is off by default and each target can opt-in by setting the
EnableShrinkWrap boolean to true in their derived class of TargetPassConfig.
This setting can also be overwritten on the command line by using
-enable-shrink-wrap.
Before you try out the pass for your target, make sure you properly fix your
emitProlog/emitEpilog/adjustForXXX method to cope with basic blocks that are not
necessarily the entry block.
** Design Decisions **
1. ShrinkWrap is its own pass right now. It could frankly be merged into PEI but
for debugging and clarity I thought it was best to have its own file.
2. Right now, we only support one save point and one restore point. At some
point we can expand this to several save point and restore point, the impacted
component would then be:
- The pass itself: New algorithm needed.
- MachineFrameInfo: Hold a list or set of Save/Restore point instead of one
pointer.
- PEI: Should loop over the save point and restore point.
Anyhow, at least for this first iteration, I do not believe this is interesting
to support the complex cases. We should revisit that when we motivating
examples.
Differential Revision: http://reviews.llvm.org/D9210
<rdar://problem/3201744>
llvm-svn: 236507
Removed code that was replicating v8i16 'shift + mask' implementation that is done more nicely by making use of LowerScalarImmediateShift
llvm-svn: 236388
This pass is responsible for constructing the EH registration object
that gets linked into fs:00, which is all it does in this change. In the
future, it will also insert stores to update the EH state number.
I considered keeping this functionality in WinEHPrepare, but it's pretty
separable and X86 specific. It has conceptually very little to do with
the task of WinEHPrepare, which is currently outlining. WinEHPrepare is
also in theory useful on ARM, but this logic is pretty x86 specific.
Reviewers: andrew.w.kaylor, majnemer
Differential Revision: http://reviews.llvm.org/D9422
llvm-svn: 236339
This helps reduce the frequency of stack realignment prologues in 32-bit
X86 Windows code. Before this change and the corresponding clang change,
we would take the max of the type preferred alignment and the explicit
alignment on the alloca.
If you don't override aggregate alignment in datalayout, you get a
default of 8. This dates back to 2007 / r34356, and changing it seems
prohibitively difficult at this point.
llvm-svn: 236270
This was breaking sqlite with the machine verifier because operand 0 was a def according to tablegen, but didn't have the 'isDef' flag set.
Looking at the ISA, its clear that this operand is a source as writing to st(0) is implicit. So move the operand to the correct place in the td file.
rdar://problem/20751584
llvm-svn: 236183
x86 Windows uses the '_' prefix for all global symbols, and this was
mistakenly being applied to frameescape labels, which are not externally
visible global symbols. They use the private global prefix 'L'.
The *right* way to fix this is probably to stop masquerading this label
as an ExternalSymbol and create a new SDNode type. These labels are not
"external", and we know they will be resolved by assembly time. Having a
custom SDNode type would allow us to do better X86 address mode
matching, so it's probably worth doing eventually.
llvm-svn: 236123
We don't need codegen-only intrinsic instructions for the vector forms of these instructions.
This makes the reciprocal estimate instruction lowering identical to how we handle normal
square roots: (V)SQRTPS / (V)SQRTPD.
No existing regression tests fail with this patch.
Differential Revision: http://reviews.llvm.org/D9301
llvm-svn: 236013
This is a preliminary step to using the IR-level floating-point fast-math-flags in the SDAG (D8900).
In this patch, we introduce the optimization flags as their own struct. As noted in the TODO comment,
we should eventually share this data between the IR passes and the backend.
We also switch the existing nsw / nuw / exact bit functionality of the BinaryWithFlagsSDNode class to
use the new struct.
The tradeoff is that instead of using the free but limited space of SDNode's SubclassData, we add a
data member to the subclass. This means we don't have to repeat all of the get/set methods per flag,
but we're potentially adding size to all nodes of this subclassi type.
In practice on 64-bit systems (measured on Linux and MacOS X), there is no size difference between an
SDNode and BinaryWithFlagsSDNode after this change: they're both 80 bytes. This means that we had at
least one free byte to play with due to struct alignment.
Differential Revision: http://reviews.llvm.org/D9325
llvm-svn: 235997
[DebugInfo] Add debug locations to constant SD nodes
This adds debug location to constant nodes of Selection DAG and updates
all places that create constants to pass debug locations
(see PR13269).
Can't guarantee that all locations are correct, but in a lot of cases choice
is obvious, so most of them should be. At least all tests pass.
Tests for these changes do not cover everything, instead just check it for
SDNodes, ARM and AArch64 where it's easy to get incorrect locations on
constants.
This is not complete fix as FastISel contains workaround for wrong debug
locations, which drops locations from instructions on processing constants,
but there isn't currently a way to use debug locations from constants there
as llvm::Constant doesn't cache it (yet). Although this is a bit different
issue, not directly related to these changes.
Differential Revision: http://reviews.llvm.org/D9084
llvm-svn: 235989
This adds debug location to constant nodes of Selection DAG and updates
all places that create constants to pass debug locations
(see PR13269).
Can't guarantee that all locations are correct, but in a lot of cases choice
is obvious, so most of them should be. At least all tests pass.
Tests for these changes do not cover everything, instead just check it for
SDNodes, ARM and AArch64 where it's easy to get incorrect locations on
constants.
This is not complete fix as FastISel contains workaround for wrong debug
locations, which drops locations from instructions on processing constants,
but there isn't currently a way to use debug locations from constants there
as llvm::Constant doesn't cache it (yet). Although this is a bit different
issue, not directly related to these changes.
Differential Revision: http://reviews.llvm.org/D9084
llvm-svn: 235977
Patch to allow int8 vectors to be multiplied on the SSE unit instead of being scalarized.
The patch sign extends the i8 lanes to i16, uses the SSE2 pmullw multiplication instruction, then packs the lower byte from each result.
Differential Revision: http://reviews.llvm.org/D9115
llvm-svn: 235837
This fixes a regression introduced at revision 218263.
On AVX, if we optimize for size, a splat build_vector of a load
is lowered into a VBROADCAST node. This is done even if the value type of the
splat build_vector node is v2i64.
Since AVX doesn't support v2f64/v2i64 broadcasts, revision 218263 added two
extra tablegen patterns to allow selecting a VMOVDDUPrm from an X86VBroadcast
where the scalar element comes from a loadi64/loadf64.
However, revision 218263 forgot to add an extra fallback pattern for the case
where we have a X86VBroadcast of a loadi64 with multiple uses.
This patch adds the missing tablegen pattern in X86InstrSSE.td.
This patch also adds an extra test to 'splat-for-size.ll' to verify that ISel
doesn't crash with a 'fatal error in the backend' due to a missing AVX pattern
to select v2i64 X86ISD::BROADCAST nodes.
llvm-svn: 235509
X86 backend.
The code generated for symbolic targets is identical to the code generated for
constant targets, except that a relocation is emitted to fix up the actual
target address at link-time. This allows IR and object files containing
patchpoints to be cached across JIT-invocations where the target address may
change.
llvm-svn: 235483
With SSE2, we can generate a 'movq' or other 64-bit store op on a 32-bit system
even though 64-bit integers are not legal types.
So instead of producing this:
pshufd $229, %xmm0, %xmm1 ## xmm1 = xmm0[1,1,2,3]
movd %xmm0, (%eax)
movd %xmm1, 4(%eax)
We can do:
movq %xmm0, (%eax)
This is a fix for the problem noted in D7296.
Differential Revision: http://reviews.llvm.org/D9134
llvm-svn: 235460
There doesn't seem to be a reason to perform this target ISD node matching
in an DAGCombine, moving it to lowering fixes PR23296.
Differential Revision: http://reviews.llvm.org/D9137
llvm-svn: 235394
This is an updated version of Chandler's patch D7402 that got accepted but never committed, and has bit-rotted a bit since.
I've updated the execution domain declarations to match the approach of the packed templates and also added some extra scalar unary tests.
Differential Revision: http://reviews.llvm.org/D9095
llvm-svn: 235372
X86ISD::ADDSUB, X86ISD::(F)HADD, X86ISD::(F)HSUB should not be selected
if the operand types do not match the result type because vector type
legalization cannot deal with this for custom nodes.
Testcase X86ISD::ADDSUB is attached. I could not create a testcase for
the FHADD/FHSUB cases because of: https://llvm.org/bugs/show_bug.cgi?id=23296
Differential Revision: http://reviews.llvm.org/D9120
llvm-svn: 235367
This fixes a regression introduced at revision 231243.
The target-independent selection algorithm in FastISel knows how to select
a SINT_TO_FP if the target is SSE but not AVX. That is because on X86, the
tablegen'd 'fastEmit' functions know how to select CVTSI2SSrr and CVTSI2SDrr.
Method X86FastISel::X86SelectSIToFP was therefore working under the
wrong assumption that the target was AVX. That assumption was incorrect since
we can have a target that is neither AVX nor SSE.
So, rather than asserting for the presence of AVX, we should have had an
early exit from 'X86SelectSIToFP' if the target was not AVX.
This patch fixes the issue replacing the invalid assertion with an early exit.
Thanks to Dimitry Andric for reporting this problem and for providing a small
reproducible testcase. Added test pr23273.ll.
llvm-svn: 235295
The fix ensures that scalar sources inserted into a vector are the correct bit size.
Integer scalar sources from BUILD_VECTOR and SCALAR_TO_VECTOR nodes may require truncation that this function doesn't currently support.
llvm-svn: 235281
This is a 1-line patch (with a TODO for AVX because that will affect
even more regression tests) that lets us substitute the appropriate
64-bit store for the float/double/int domains.
It's not clear to me exactly what the difference is between the 0xD6 (MOVPQI2QImr) and
0x7E (MOVSDto64mr) opcodes, but this is apparently the right choice.
Differential Revision: http://reviews.llvm.org/D8691
llvm-svn: 235014
Set the transform bar at 2 divisions because the fastest current
x86 FP divider circuit is in SandyBridge / Haswell at 10 cycle
latency (best case) relative to a 5 cycle multiplier.
So that's the worst case for this transform (no latency win),
but multiplies are obviously pipelined while divisions are not,
so there's still a big throughput win which we would expect to
show up in typical FP code.
These are the sequences I'm comparing:
divss %xmm2, %xmm0
mulss %xmm1, %xmm0
divss %xmm2, %xmm0
Becomes:
movss LCPI0_0(%rip), %xmm3 ## xmm3 = mem[0],zero,zero,zero
divss %xmm2, %xmm3
mulss %xmm3, %xmm0
mulss %xmm1, %xmm0
mulss %xmm3, %xmm0
[Ignore for the moment that we don't optimize the chain of 3 multiplies
into 2 independent fmuls followed by 1 dependent fmul...this is the DAG
version of: https://llvm.org/bugs/show_bug.cgi?id=21768 ...if we fix that,
then the transform becomes even more profitable on all targets.]
Differential Revision: http://reviews.llvm.org/D8941
llvm-svn: 235012
The patch is generated using clang-tidy misc-use-override check.
This command was used:
tools/clang/tools/extra/clang-tidy/tool/run-clang-tidy.py \
-checks='-*,misc-use-override' -header-filter='llvm|clang' \
-j=32 -fix -format
http://reviews.llvm.org/D8925
llvm-svn: 234679
This patch allows SSE4.1 targets to use (V)PINSRB to create 16i8 vectors by inserting i8 scalars directly into a XMM register instead of merging pairs of i8 scalars into a i16 and using the SSE2 PINSRW instruction.
This allows folding of byte loads and reduces scalar register usage as well.
Differential Revision: http://reviews.llvm.org/D8839
llvm-svn: 234193
Previously the patterns didn't have high enough priority and we would only use the GR32 form if the only the upper 32 or 56 bits were zero.
Fixes PR23100.
llvm-svn: 234075
We don't need to represent UnwindHelp in IR. Instead, we can use the
knowledge that we are emitting the parent function to decide if we
should create the UnwindHelp stack object.
llvm-svn: 234061
As a follow-up to r234021, assert that a debug info intrinsic variable's
`MDLocalVariable::getInlinedAt()` always matches the
`MDLocation::getInlinedAt()` of its `!dbg` attachment.
The goal here is to get rid of `MDLocalVariable::getInlinedAt()`
entirely (PR22778), but I'll let these assertions bake for a while
first.
If you have an out-of-tree backend that just broke, you're probably
attaching the wrong `DebugLoc` to a `DBG_VALUE` instruction. The one
you want is the location that was attached to the corresponding
`@llvm.dbg.declare` or `@llvm.dbg.value` call that you started with.
llvm-svn: 234038
Fixes PR19582.
Previously, when an asm assignment (.set or =) was created, we would look up
the section immediately in MCSymbol::setVariableValue. This caused symbols
to receive the wrong section if the RHS of the assignment had not been seen
yet. This had a knock-on effect in the object file emitters, causing them
to emit extra symbols, or to give symbols the wrong visibility or the wrong
section. For example, in the following asm:
.data
.Llocal:
.text
leaq .Llocal1(%rip), %rdi
.Llocal1 = .Llocal2
.Llocal2 = .Llocal
the first assignment would give .Llocal1 a null section, which would never get
fixed up by the second assignment. This would cause the ELF object file emitter
to consider .Llocal1 to be an undefined symbol and give it external linkage,
even though .Llocal1 should not have been emitted at all in the object file.
Or in the following asm:
alias_to_local = Ltmp0
Ltmp0:
the Mach-O object file emitter would give the alias_to_local symbol a n_type
of N_SECT and a n_sect of 0. This is invalid under the Mach-O specification,
which requires N_SECT symbols to receive a non-zero section number if the
symbol is defined in a section in the object file.
https://developer.apple.com/library/mac/documentation/DeveloperTools/Conceptual/MachORuntime/#//apple_ref/c/tag/nlist
After this change we do not look up the section when the assignment is created,
but instead look it up on demand and store it in Section, which is treated
as a cache if the symbol is a variable symbol.
This change also fixes a bug in MCExpr::FindAssociatedSection. Previously,
if we saw a subtraction, we would return the first referenced section, even in
cases where we should have been returning the absolute pseudo-section. Now we
always return the absolute pseudo-section for expressions that subtract two
section-derived expressions. This isn't always correct (e.g. if one of the
sections ends up being laid out at an absolute address), but it's probably
the best we can do without more context.
This allows us to remove code in two places where we appear to have been
working around this bug, in MachObjectWriter::markAbsoluteVariableSymbols
and in X86AsmPrinter::EmitStartOfAsmFile.
Re-applies r233595 (aka D8586), which was reverted in r233898.
Differential Revision: http://reviews.llvm.org/D8798
llvm-svn: 233995
Without this patch, we split the 256-bit vector into halves and produced something like:
movzwl (%rdi), %eax
vmovd %eax, %xmm0
vxorps %xmm1, %xmm1, %xmm1
vblendps $15, %ymm0, %ymm1, %ymm0 ## ymm0 = ymm0[0,1,2,3],ymm1[4,5,6,7]
Now, we eliminate the xor and blend because those zeros are free with the vmovd:
movzwl (%rdi), %eax
vmovd %eax, %xmm0
This should be the final fix needed to resolve PR22685:
https://llvm.org/bugs/show_bug.cgi?id=22685
llvm-svn: 233941
For code like this:
define <8 x i32> @load_v8i32() {
ret <8 x i32> <i32 7, i32 0, i32 0, i32 0, i32 0, i32 0, i32 0, i32 0>
}
We produce this AVX code:
_load_v8i32: ## @load_v8i32
movl $7, %eax
vmovd %eax, %xmm0
vxorps %ymm1, %ymm1, %ymm1
vblendps $1, %ymm0, %ymm1, %ymm0 ## ymm0 = ymm0[0],ymm1[1,2,3,4,5,6,7]
retq
There are at least 2 bugs in play here:
We're generating a blend when a move scalar does the same job using 2 less instruction bytes (see FIXMEs).
We're not matching an existing pattern that would eliminate the xor and blend entirely. The zero bytes are free with vmovd.
The 2nd fix involves an adjustment of "AddedComplexity" [1] and mostly masks the 1st problem.
[1] AddedComplexity has close to no documentation in the source.
The best we have is this comment: "roughly corresponds to the number of nodes that are covered".
It appears that x86 has bastardized this definition by inflating its values for some other
undocumented reason. For example, we have a pattern with "AddedComplexity = 400" (!).
I searched my way to this page:
https://groups.google.com/forum/#!topic/llvm-dev/5UX-Og9M0xQ
Differential Revision: http://reviews.llvm.org/D8794
llvm-svn: 233931
addl has higher throughput and this was needlessly picking a suboptimal
encoding causing PR23098.
I wish there was a way of doing this without further duplicating tbl-
generated patterns, but so far I haven't found one.
llvm-svn: 233832
This lets us catch exceptions in simple cases.
N.B. Things that do not work include (but are not limited to):
- Throwing from within a catch handler.
- Catching an object with a named catch parameter.
- 'CatchHigh' is fictitious, we aren't sure of its purpose.
- We aren't entirely efficient with regards to the number of EH states
that we generate.
- IP-to-State tables are sensitive to the order of emission.
llvm-svn: 233767
I suggested this change in D7898 (http://llvm.org/viewvc/llvm-project?view=revision&revision=231354)
It improves the v4i64 case although not optimally. This AVX codegen:
vmovq {{.*#+}} xmm0 = mem[0],zero
vxorpd %ymm1, %ymm1, %ymm1
vblendpd {{.*#+}} ymm0 = ymm0[0],ymm1[1,2,3]
Becomes:
vmovsd {{.*#+}} xmm0 = mem[0],zero
Unfortunately, this doesn't completely solve PR22685. There are still at least 2 problems under here:
We're not handling v32i8 / v16i16.
We're not getting the FP / int domains right for instruction selection.
But since this patch alone appears to do no harm, reduces code duplication, and helps v4i64,
I'm submitting this patch ahead of fixing the above.
Differential Revision: http://reviews.llvm.org/D8341
llvm-svn: 233704
We used to miss non-Q YMM integer vectors, and, non-Q/D XMM integer
vectors.
While there, change the v4i32 patterns to prefer MOVNTDQ.
llvm-svn: 233668
This fixes the visibility of symbols in certain edge cases involving aliases
with multiple levels of indirection.
Fixes PR19582.
Differential Revision: http://reviews.llvm.org/D8586
llvm-svn: 233595
per-function subtarget.
Currently, code-gen passes the default or generic subtarget to the constructors
of MCInstPrinter subclasses (see LLVMTargetMachine::addPassesToEmitFile), which
enables some targets (AArch64, ARM, and X86) to change their instprinter's
behavior based on the subtarget feature bits. Since the backend can now use
different subtargets for each function, instprinter has to be changed to use the
per-function subtarget rather than the default subtarget.
This patch takes the first step towards enabling instprinter to change its
behavior based on the per-function subtarget. It adds a bit "PassSubtarget" to
AsmWriter which tells table-gen to pass a reference to MCSubtargetInfo to the
various print methods table-gen auto-generates.
I will follow up with changes to instprinters of AArch64, ARM, and X86.
llvm-svn: 233411
This patch teaches fast-isel how to select 128-bit vector load instructions.
Added test CodeGen/X86/fast-isel-vecload.ll
Differential Revision: http://reviews.llvm.org/D8605
llvm-svn: 233270
This patch allows AVX blend instructions to handle insertion into the low
element of a 256-bit vector for the appropriate data types.
For f32, instead of:
vblendps $1, %xmm1, %xmm0, %xmm1 ## xmm1 = xmm1[0],xmm0[1,2,3]
vblendps $15, %ymm1, %ymm0, %ymm0 ## ymm0 = ymm1[0,1,2,3],ymm0[4,5,6,7]
we get:
vblendps $1, %ymm1, %ymm0, %ymm0 ## ymm0 = ymm1[0],ymm0[1,2,3,4,5,6,7]
For f64, instead of:
vmovsd %xmm1, %xmm0, %xmm1 ## xmm1 = xmm1[0],xmm0[1]
vblendpd $3, %ymm1, %ymm0, %ymm0 ## ymm0 = ymm1[0,1],ymm0[2,3]
we get:
vblendpd $1, %ymm1, %ymm0, %ymm0 ## ymm0 = ymm1[0],ymm0[1,2,3]
For the hardware-neglected integer data types, I left a TODO comment in the
code and added regression tests for a follow-on patch.
Differential Revision: http://reviews.llvm.org/D8609
llvm-svn: 233199
We can't use TargetFrameLowering::getFrameIndexOffset directly, because
Win64 really wants the offset from the stack pointer at the end of the
prologue. Instead, use X86FrameLowering::getFrameIndexOffsetFromSP(),
which is a pretty close approximiation of that. It fails to handle cases
with interestingly large stack alignments, which is pretty uncommon on
Win64 and is TODO.
llvm-svn: 233137
vperm2x128 instructions have the special ability (aka free hardware capability)
to shuffle zero values into a vector.
This patch recognizes that type of shuffle and generates the appropriate
control byte.
https://llvm.org/bugs/show_bug.cgi?id=22984
Differential Revision: http://reviews.llvm.org/D8563
llvm-svn: 233100
This reverts commit r233055.
It still causes buildbot failures (gcc running out of memory on several platforms, and a self-host failure on arm), although less than the previous time.
llvm-svn: 233068
