Summary: We need to have accurate-sample-profile in function attribute so that it works with LTO.
Reviewers: davidxl, rsmith
Reviewed By: davidxl
Subscribers: sanjoy, mehdi_amini, javed.absar, llvm-commits, eraman
Differential Revision: https://reviews.llvm.org/D37113
llvm-svn: 311706
Summary: Currently FastISel lowers constexpr calls as indirect calls.
We'd like those to direct calls, and falling back to SelectionDAGISel
handles that.
Reviewers: dschuff, sunfish
Subscribers: jfb, sbc100, llvm-commits, aheejin
Differential Revision: https://reviews.llvm.org/D37073
llvm-svn: 311693
Summary:
Update GCC test suite failure expectations as we add -O0 to the bare tests in
WebAssembly waterfall. There are still several untriaged lld failures.
Reviewers: sbc100, jgravelle-google, dschuff
Reviewed By: dschuff
Subscribers: jfb
Differential Revision: https://reviews.llvm.org/D37100
llvm-svn: 311691
This fixes a warning when there are zero defined predicates and also fixes an
unnoticed bug where the first predicate in the table was unusable.
llvm-svn: 311684
Instead of loading 0 from a constant pool, it's of course much better to
materialize it using an fmov and the zero register.
Thanks to Ahmed Bougacha for the suggestion.
Differential Revision: https://reviews.llvm.org/D37102
llvm-svn: 311662
The check (assuming positive stride) for validity of memmove should be
(a) the destination is at a lower address than the source, or
(b) the distance between the source and destination is greater than or
equal the number of bytes copied.
For the second part it is sufficient to assume that the destination
is at a higher address, since the opposite case is covered by (a).
The distance calculation was previously done by subtracting the
pointers in the wrong order.
llvm-svn: 311650
ARMTargetLowering::isLegalAddressingMode can accept illegal addressing modes
for the Thumb1 target. This causes generation of redundant code and affects
performance.
This fixes PR34106: https://bugs.llvm.org/show_bug.cgi?id=34106
Differential Revision: https://reviews.llvm.org/D36467
llvm-svn: 311649
Summary:
We add the precise cache sizes and associativity for the following Intel
architectures:
- Penry
- Nehalem
- Westmere
- Sandy Bridge
- Ivy Bridge
- Haswell
- Broadwell
- Skylake
- Kabylake
Polly uses since several months a performance model for BLAS computations that
derives optimal cache and register tile sizes from cache and latency
information (based on ideas from "Analytical Modeling Is Enough for High-Performance BLIS", by Tze Meng Low published at TOMS 2016).
While bootstrapping this model, these target values have been kept in Polly.
However, as our implementation is now rather mature, it seems time to teach
LLVM itself about cache sizes.
Interestingly, L1 and L2 cache sizes are pretty constant across
micro-architectures, hence a set of architecture specific default values
seems like a good start. They can be expanded to more target specific values,
in case certain newer architectures require different values. For now a set
of Intel architectures are provided.
Just as a little teaser, for a simple gemm kernel this model allows us to
improve performance from 1.2s to 0.27s. For gemm kernels with less optimal
memory layouts even larger speedups can be reported.
Reviewers: Meinersbur, bollu, singam-sanjay, hfinkel, gareevroman, fhahn, sebpop, efriedma, asb
Reviewed By: fhahn, asb
Subscribers: lsaba, asb, pollydev, llvm-commits
Differential Revision: https://reviews.llvm.org/D37051
llvm-svn: 311647
This is a follow up patch of r311154 and introduces custom lowering of copysign
f16 to avoid promotions to single precision types when the subtarget supports
fullfp16.
Differential Revision: https://reviews.llvm.org/D36893
llvm-svn: 311646
Summary:
This patch adds support for predicates on imm nodes but only for ImmLeaf and not
for PatLeaf or PatFrag and only where the value does not need to be transformed
before being rendered into the instruction.
The limitation on PatLeaf/PatFrag/SDNodeXForm is due to differences in the
necessary target-supplied C++ for GlobalISel.
Depends on D36085
The previous commit was reverted for breaking the build but this appears to have
been the recurring problem on the Windows bots with tablegen not being re-run
when llvm-tblgen is changed but the .td's aren't. If it re-occurs then forcing a
build with clean=True should fix it but this string should do this in advance:
Requires a clean build.
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar
Reviewed By: rovka
Subscribers: kristof.beyls, javed.absar, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D36086
llvm-svn: 311645
This patch is intended to enable the use of basic double letter constraints used in GCC extended inline asm {Yi Y2 Yz Y0 Ym Yt}.
Supersedes D35204
Clang counterpart: D36371
Differential Revision: https://reviews.llvm.org/D36369
llvm-svn: 311644
Summary:
When reassociating an expression, do not drop the instruction's
original debug location in case the replacement location is
missing.
The debug location must at least not be dropped for inlinable
callsites of debug-info-bearing functions in debug-info-bearing
functions. Failing to do so would result in an "inlinable function "
"call in a function with debug info must have a !dbg location"
error in the verifier.
As preserving the original debug location is not expected
to result in overly jumpy debug line information, it is
preserved for all other cases too.
This fixes PR34231:
https://bugs.llvm.org/show_bug.cgi?id=34231
Original patch by David Stenberg
Reviewers: davide, craig.topper, mcrosier, dblaikie, aprantl
Reviewed By: davide, aprantl
Subscribers: aprantl
Differential Revision: https://reviews.llvm.org/D36865
llvm-svn: 311642
Some refactoring to X86AsmParser, mostly regarding the way rewrites are conducted.
Mainly, we try to concentrate all the rewrite effort under one hood, so it'll hopefully be less of a mess and easier to maintain and understand.
naturally, some frontend tests were affected: D36794
Differential Revision: https://reviews.llvm.org/D36793
llvm-svn: 311639
Fix for copy-paste mistake in r311154; setOperationAction for fcos and frem f16
operands appeared twice (and it should be set to 'promote').
Differential Revision: https://reviews.llvm.org/D37071
llvm-svn: 311635
Mostly this involved giving unnamed values names and running the IR
through `opt` to re-format it but merging in any important comments in
the original. I then deleted pointless comments and inlined the function
attributes for ease of reading and editting.
All of this is to make it much easier to see the instructions being
generated here and evaluate any updates to the tests.
llvm-svn: 311634
This just switches handleAllErrors from using custom assertions that all errors
have been handled to using cantFail. This change involves moving some of the
class and function definitions around though.
llvm-svn: 311631
Summary:
Previously, llvm-cvtres crashes on .res files which are empty except for
the null header. This allows the library to simply pass over them.
Subscribers: llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D37044
llvm-svn: 311625
When one operand is a user of another in a promoted binary operation
we may replace and delete the returned value before returning
triggering an assertion. Reorder node replacements to prevent this.
Fixes PR34137.
Landing on behalf of Nirav.
Differential Revision: https://reviews.llvm.org/D36581
llvm-svn: 311623
Summary: This patch adds test to cover the logic guarded by "accurate-sample-profile" flag.
Reviewers: davidxl
Reviewed By: davidxl
Subscribers: sanjoy, llvm-commits, eraman
Differential Revision: https://reviews.llvm.org/D37084
llvm-svn: 311618
Switching to external relocations for ARM-mode branches (to allow Thumb
interworking when the offset is unencodable) causes calls to temporary symbols
to be miscompiled and instead go to the parent externally visible symbol.
Calling a temporary never happens in compiled code, but can occasionally in
hand-written assembly.
llvm-svn: 311611
Current PGO only annotates the edge weight for branch and switch instructions
with profile counts. We should also annotate the indirectbr instruction as
all the information is there. This patch enables the annotating for indirectbr
instructions. Also uses this annotation in branch probability analysis.
Differential Revision: https://reviews.llvm.org/D37074
llvm-svn: 311604
