Keep loads and stores together (target defines how many loads
and stores to gang up), such that it will help in pairing
and vectorization.
Differential Revision https://reviews.llvm.org/D46477
llvm-svn: 332482
The canonicalization was restricted to shuffle masks with
a 1-to-1 mapping to the constant vector, but that disqualifies
the common splat pattern. This is part of solving PR37463:
https://bugs.llvm.org/show_bug.cgi?id=37463
llvm-svn: 332479
The module ID numbering typically starts at 0 (in both the new and old
LTO APIs, used by linkers). Make llvm-lto consistent with that.
Split out of D46699.
llvm-svn: 332476
Summary:
A recent patch ([[ https://reviews.llvm.org/rL331587 | rL331587 ]]) to Capture Tracking taught it that the `launder_invariant_group` intrinsic captures its argument only by returning it. Unfortunately, BasicAA still considered every call instruction as a possible escape source and hence concluded that the result of a `launder_invariant_group` call cannot alias any local non-escaping value. This led to [[ https://bugs.llvm.org/show_bug.cgi?id=37458 | bug 37458 ]].
This patch updates the relevant check for escape sources in BasicAA.
Reviewers: Prazek, kuhar, rsmith, hfinkel, sanjoy, xbolva00
Reviewed By: hfinkel, xbolva00
Subscribers: JDevlieghere, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D46900
llvm-svn: 332466
Revision 332390 introduced a FetchStage class in llvm-mca.
By design, FetchStage owns all the instructions in-flight in the OoO Backend.
Before this change, new instructions were added to a DenseMap indexed by
instruction id. The problem with using a DenseMap is that elements are not
ordered by key. This was causing a massive slow down in method
FetchStage::postExecute(), which searches for instructions retired that can be
deleted.
This patch replaces the DenseMap with a std::map ordered by instruction index.
At the end of every cycle, we search for the first instruction which is not
marked as "retired", and we remove all the previous instructions before it.
This works well because instructions are retired in-order.
Before this patch, a debug build of llvm-mca (on my Ryzen linux machine) took
~8.0 seconds to simulate 3000 iterations of a x86 dot-product (a `vmulps,
vpermilps, vaddps, vpermilps, vaddps` sequence). With this patch, it now takes
~0.8s to run all the 3000 iterations.
llvm-svn: 332461
Summary: If file stream arg is not captured and source is fopen, we could replace IO calls by unlocked IO ("_unlocked" function variants) to gain better speed,
Reviewers: efriedma, RKSimon, spatel, sanjoy, hfinkel, majnemer, lebedev.ri, rja
Reviewed By: rja
Subscribers: rja, srhines, efriedma, lebedev.ri, llvm-commits
Differential Revision: https://reviews.llvm.org/D45736
llvm-svn: 332452
A lot of the models still have too many InstRW overrides for these new classes - this needs cleaning up but I wanted to get the classes in first
llvm-svn: 332451
So that it can be shared with other passes that may end up doing the same
thing.
Differential Revision: https://reviews.llvm.org/D45874
llvm-svn: 332450
We currently handle all aggregates by creating one large LLT, and letting the
legalizer deal with splitting them up. However using this approach means that
we can't support big endian code correctly.
This patch changes the way that the IRTranslator deals with aggregate values,
by splitting them up into their constituent element values. To do this, parts
of the translator need to be modified to deal with multiple VRegs for a single
Value.
A new Value to VReg mapper is introduced to help keep compile time under
control, currently there is no measurable impact on CTMark despite the extra
code being generated in some cases.
Patch is based on the original work of Tim Northover.
Differential Revision: https://reviews.llvm.org/D46018
llvm-svn: 332449
Add support for this target hook, covering MIPS, microMIPS and MIPSR6, along
with some tests. Also add missing getOppositeBranchOpc() cases exposed by the
tests.
Reviewers: atanasyan, abeserminji, smaksimovic
Differential Revision: https://reviews.llvm.org/D46794
llvm-svn: 332446
This patch re-introduces the "S" inline assembler constraint. This matches
an absolute symbolic address or a label reference. The primary use case is
asm("adrp %0, %1\n\t"
"add %0, %0, :lo12:%1" : "=r"(addr) : "S"(&var));
I say re-introduces as it seems like "S" was implemented in the original
AArch64 backend, but it looks like it wasn't carried forward to the merged
backend. The original implementation had A and L modifiers that could be
used to print ":lo12:" to the string. It looks like gcc doesn't use these
and :lo12: is expected to be written in the inline assembly string so I've
not implemented A and L. Clang already supports the S modifier.
Fixes PR37180
Differential Revision: https://reviews.llvm.org/D46745
llvm-svn: 332444
Summary:
This sequence ends the CDATA block so any characters after that are no
longer escaped. This can be fixed by replacing "]]>" with "]]]]><![CDATA[>".
Reviewers: cmatthews
Reviewed By: cmatthews
Differential Revision: https://reviews.llvm.org/D46886
llvm-svn: 332440
Summary:
SelectionDAGLegalize::ExpandNode() inserts an ISD::MUL when lowering a
BR_JT opcode. While many backends optimize this multiply into a shift, e.g.
the MIPS backend currently always lowers this into a sequence of
load-immediate+multiply+mflo in MipsSETargetLowering::lowerMulDiv().
I initially changed the multiply to a shift in the MIPS backend but it
turns out that would not have handled the MIPSR6 case and was a lot more
code than doing it in LegalizeDAG.
I believe performing this simple optimization in LegalizeDAG instead of
each individual backend is the better solution since this also fixes other
backeds such as MSP430 which calls the multiply runtime function
__mspabi_mpyi without this patch.
Reviewers: sdardis, atanasyan, pftbest, asl
Reviewed By: sdardis
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45760
llvm-svn: 332439
A catchswitch must be the only non-phi instruction in its basic block;
attempting to move a retain or release into a catchswitch basic block
will result in invalid IR. Explicitly mark a CFG hazard in this case to
prevent the code motion.
Differential Revision: https://reviews.llvm.org/D46482
llvm-svn: 332430
Summary:
Before this patch, signal handling wasn't signal safe. This leads to real-world
crashes. It used ManagedStatic inside of signals, this can allocate and can lead
to unexpected state when a signal occurs during llvm_shutdown (because
llvm_shutdown destroys the ManagedStatic). It also used cl::opt without custom
backing storage. Some de-allocation was performed as well. Acquiring a lock in a
signal handler is also a great way to deadlock.
We can't just disable signals on llvm_shutdown because the signals might do
useful work during that shutdown. We also can't just disable llvm_shutdown for
programs (instead of library uses of clang) because we'd have to then mark the
pointers as not leaked and make sure all the ManagedStatic uses are OK to leak
and remain so.
Move all of the code to lock-free datastructures instead, and avoid having any
of them in an inconsistent state. I'm not trying to be fancy, I'm not using any
explicit memory order because this code isn't hot. The only purpose of the
atomics is to guarantee that a signal firing on the same or a different thread
doesn't see an inconsistent state and crash. In some cases we might miss some
state (for example, we might fail to delete a temporary file), but that's fine.
Note that I haven't touched any of the backtrace support despite it not
technically being totally signal-safe. When that code is called we know
something bad is up and we don't expect to continue execution, so calling
something that e.g. sets errno is the least of our problems.
A similar patch should be applied to lib/Support/Windows/Signals.inc, but that
can be done separately.
<rdar://problem/28010281>
Reviewers: dexonsmith
Subscribers: aheejin, llvm-commits
Differential Revision: https://reviews.llvm.org/D46858
llvm-svn: 332428
The instructions using registers should be DBG_VALUE and normal
instructions. Use isDebugValue() to filter out DBG_VALUE and add
an assert to ensure there is no other kind of debug instructions
using the registers.
Differential Revision: https://reviews.llvm.org/D46739
Patch by Hsiangkai Wang.
llvm-svn: 332427
It doesn't matter much this late in the pipeline, but one place that
does check for it is the function alignment code.
Differential Revision: https://reviews.llvm.org/D46373
llvm-svn: 332415
It is legal for the type passed to isLegalAddressingMode to be
unsized or, more specifically, VoidTy. In this case, we must
check the legality of load / stores for all legal types. Directly
trying to call getTypeStoreSize is incorrect, and leads to breakage
in e.g. Loop Strength Reduction. This change guards against that
behaviour.
Differential Revision: https://reviews.llvm.org/D40405
llvm-svn: 332409
WasmObjectWriter mostly operates with function segments offsets that do
not include their size fields. WasmObjectFile needs to have and provide
this information to the lld to maintain proper
R_WEBASSEMBLY_FUNCTION_OFFSET_I32 relocations entries.
Patch by Yury Delendik
Differential Revision: https://reviews.llvm.org/D46763
llvm-svn: 332406
Author: Samuel Pitoiset
Without this patch, it appears to me that we are selecting
the wrong operand when inverting conditions. In the attached
test, it will select %tmp3 instead of %tmp4. To fix it, just
use 'A' as everywhere.
This fixes a regression introduced by
"[PatternMatch] define m_Not using m_Xor and cst_pred_ty"
https://reviews.llvm.org/D46351
llvm-svn: 332403
