The manual says that Thumb2 add/sub instructions are only allowed to modify sp
if the first source is also sp. This is slightly different from the usual rGPR
restriction since it's context-sensitive, so implement it in C++.
llvm-svn: 358987
If we only match build vectors, we can miss some patterns
that use shuffles as seen in the affected tests.
Note that the underlying calls within getSplatSourceVector()
have the potential for compile-time explosion because of
exponential recursion looking through binop opcodes, but
currently the list of supported opcodes is very limited.
Both of those problems should be addressed in follow-up
patches.
llvm-svn: 358984
Summary:
When an LCSSA phi survives through instruction selection, the pass
ends up removing that phi entirely because it is dominated by the
logic that does the lanemask merging.
This then used to trigger an assertion when processing a dependent
phi instruction.
Change-Id: Id4949719f8298062fe476a25718acccc109113b6
Reviewers: llvm-commits
Subscribers: kzhuravl, jvesely, wdng, yaxunl, t-tye, tpr, dstuttard, rtaylor, arsenm
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60999
llvm-svn: 358983
Converting InlineCost interface and its internals into CallBase usage.
Inliners themselves are still not converted.
Reviewed By: reames
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60636
llvm-svn: 358982
The check for creating CBZ in constant island pass recently obtained the
ability to search backwards to find a Cmp instruction. The code in IfCvt should
mirror this to allow more conversions to the smaller form. The common code has
been pulled out into a separate function to be shared between the two places.
Differential Revision: https://reviews.llvm.org/D60090
llvm-svn: 358977
Ifcvt can replicate instructions as it converts them to be predicated. This
stops that from happening on thumb2 targets at minsize where an extra IT
instruction is likely needed.
Differential Revision: https://reviews.llvm.org/D60089
llvm-svn: 358974
Summary:
The DAGCombiner is rewriting (canonicalizing) an ISD::ADD
with no common bits set in the operands as an ISD::OR node.
This could sometimes result in "missing out" on some
combines that normally are performed for ADD. To be more
specific this could happen if we already have rewritten an
ADD into OR, and later (after legalizations or combines)
we expose patterns that could have been optimized if we
had seen the OR as an ADD (e.g. reassociations based on ADD).
To make the DAG combiner less sensitive to if ADD or OR is
used for these "no common bits set" ADD/OR operations we
now apply most of the ADD combines also to an OR operation,
when value tracking indicates that the operands have no
common bits set.
Reviewers: spatel, RKSimon, craig.topper, kparzysz
Reviewed By: spatel
Subscribers: arsenm, rampitec, lebedev.ri, jvesely, nhaehnle, hiraditya, javed.absar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59758
llvm-svn: 358965
This patch provides intrinsics support for Memory Tagging Extension (MTE),
which was introduced with the Armv8.5-a architecture.
The intrinsics are described in detail in the latest
ACLE Q1 2019 documentation: https://developer.arm.com/docs/101028/latest
Reviewed by: David Spickett
Differential Revision: https://reviews.llvm.org/D60486
llvm-svn: 358963
About the compressed sections spec says:
(https://docs.oracle.com/cd/E37838_01/html/E36783/section_compression.html)
sh_addralign fields of the section header for a compressed section
reflect the requirements of the compressed section.
Currently, llvm-mc always puts uncompressed section alignment to sh_addralign.
It is not correct. zlib styled section contains an Elfxx_Chdr header,
so we should either use 4 or 8 values depending on the target
(Uncompressed section alignment is stored in ch_addralign field of the compression header).
GNU assembler version 2.31.1 also has this issue,
but in 2.32.51 it was already fixed. This is how it was found
during debugging of the https://bugs.llvm.org/show_bug.cgi?id=40482
actually.
Differential revision: https://reviews.llvm.org/D60965
llvm-svn: 358960
In some circumstances we can end up with setup costs that are very complex to
compute, even though the scevs are not very complex to create. This can also
lead to setupcosts that are calculated to be exactly -1, which LSR treats as an
invalid cost. This patch puts a limit on the recursion depth for setup cost to
prevent them taking too long.
Thanks to @reames for the report and test case.
Differential Revision: https://reviews.llvm.org/D60944
llvm-svn: 358958
This reverts r358910 (git commit 2b744665308fc8d30a3baecb4947f2bd81aa7d30)
While this patch *seems* trivial and safe and correct, it is not. The
copies are actually load bearing copies. You can observe this with MSan
or other ways of checking for use-after-destroy, but otherwise this may
result in ... difficult to debug inexplicable behavior.
I suspect the issue is that the debug location is used after the
original reference to it is removed. The metadata backing it gets
destroyed as its last references goes away, and then we reference it
later through these const references.
llvm-svn: 358940
This is a more generic solution; while the sanitizer support can be used
only for sanitizer instrumented builds, the multilib support can be used
to build other variants such as noexcept which is what we would like to use
in Fuchsia.
The name CMake target name uses the target name, same as for the regular
runtimes build and the name of the multilib, concatenated with '+'. The
libraries are installed in a subdirectory named after the multilib.
Differential Revision: https://reviews.llvm.org/D60926
llvm-svn: 358935
Currently to opt in to debug_names in DWARFv5, the IR must contain
'nameTableKind: Default' which also enables debug_pubnames.
Instead, only allow one of {debug_names, apple_names, debug_pubnames,
debug_gnu_pubnames}.
nameTableKind: Default gives debug_names in DWARFv5 and greater,
debug_pubnames in v4 and earlier - and apple_names when tuning for lldb
on MachO.
nameTableKind: GNU always gives gnu_pubnames
llvm-svn: 358931
This was supposed to be NFC, but the change in SDLoc
definitions causes instruction scheduling changes.
There's nothing x86-specific in this code, and it can
likely be used from DAGCombiner's simplifyVBinOp().
llvm-svn: 358930
Summary:
- Only apply packed literal `op_sel_hi` skipping on operands requiring
packed literals. Even an instruction is `packed`, it may have operand
requiring non-packed literal, such as `v_dot2_f32_f16`.
Reviewers: rampitec, arsenm, kzhuravl
Subscribers: jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60978
llvm-svn: 358922
When a Swift module built with debug info imports a library without
debug info from a textual interface, the textual interface is
necessary to reconstruct types defined in the library's interface. By
recording the Swift interface files in DWARF dsymutil can collect them
and LLDB can find them.
This patch teaches dsymutil to look for DW_TAG_imported_modules and
records all references to parseable Swift ingterfrace files and copies
them to
a.out.dSYM/Contents/Resources/<Arch>/<ModuleName>.swiftinterface
<rdar://problem/49751748>
llvm-svn: 358921
If we have a store to a piece of memory which is known constant, then we know the store must be storing back the same value. As a result, the store (or memset, or memmove) must either be down a dead path, or a noop. In either case, it is valid to simply remove the store.
The motivating case for this involves a memmove to a buffer which is constant down a path which is dynamically dead.
Note that I'm choosing to implement the less aggressive of two possible semantics here. We could simply say that the store *is undefined*, and prune the path. Consensus in the review was that the more aggressive form might be a good follow on change at a later date.
Differential Revision: https://reviews.llvm.org/D60659
llvm-svn: 358919
Summary:
This test was added to verify that createUniqueEntity() does
not enter an infinite loop when all possible names are taken. However,
it also checked that all possible names are generated, which is flaky
(because the names are generated randomly). This change increases the
number of attempts we make to make flakes exceedingly
unlikely (3.88e-62).
Reviewers: fedor.sergeev, rsmith
Reviewed By: fedor.sergeev
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D56336
llvm-svn: 358914
In the process, use the existing masked.load combine which is slightly stronger, and handles a mix of zero and undef elements in the mask.
llvm-svn: 358913
These are inserted after branch relaxation, and for some reason it's
decided to put them in the long branch expansion block. It's probably
not great to rely on the source block address, so this should probably
be switched to being PC relative instead of relying on the block
address
llvm-svn: 358909
Back in August, r340525 introduced a dependency on the assumption
cache tracker in the ipsccp pass, but that commit missed a call to
INITIALIZE_PASS_DEPENDENCY, which leaves the assumption cache
improperly registered if SCCP is the only thing that pulls it in.
llvm-svn: 358903
Currently, we do not expose BPI to loop passes at all. In the old pass manager, we appear to have been ignoring the fact that LCSSA and/or LoopSimplify didn't preserve BPI, and making it available to the following loop passes anyways. In the new one, it's invalidated before running any loop pass if either LCSSA or LoopSimplify actually make changes. If they don't make changes, then BPI is valid and available. So, we go ahead and teach LCSSA and LoopSimplify how to preserve BPI for consistency between old and new pass managers.
This patch avoids an invalidation between the two requires in the following trivial pass pipeline:
opt -passes="requires<branch-prob>,loop(no-op-loop),requires<branch-prob>"
(when the input file is one which requires either LCSSA or LoopSimplify to canonicalize the loops)
Differential Revision: https://reviews.llvm.org/D60790
llvm-svn: 358901
to CallInst.
The issue was raised here: https://reviews.llvm.org/D60903#1472783
The function Instruction::updateProfWeight is only used for CallInst in
profile update. From the current interface, it is very easy to think that
the function can also be used for branch instruction. However, Branch
instruction does't need the scaling the function provides for
branch_weights and VP (value profile), in addition, scaling may introduce
inaccuracy for branch probablity.
The patch moves the function updateProfWeight from Instruction class to
CallInst to remove the confusion. The patch also changes the scaling of
branch_weights from a loop to a block because we know that ProfileData
for branch_weights of CallInst will only have two operands at most.
Differential Revision: https://reviews.llvm.org/D60911
llvm-svn: 358900
This patch adds support for BigBitWidth -> SmallBitWidth bitcasts, splitting the DemandedBits/Elts accordingly.
The AMDGPU backend needed an extra (srl (and x, c1 << c2), c2) -> (and (srl(x, c2), c1) combine to encourage BFE creation, I investigated putting this in DAGCombine but it caused a lot of noise on other targets - some improvements, some regressions.
The X86 changes are all definite wins.
Differential Revision: https://reviews.llvm.org/D60462
llvm-svn: 358887
