This patch adds encoding and decoding of the FunctionInfo objects along with full error handling and tests. Full details of the FunctionInfo encoding format appear in the FunctionInfo.h header file.
Differential Revision: https://reviews.llvm.org/D67506
llvm-svn: 372135
We were previously using the SelectT2AddrModeImm7 for both normal and narrowing
MVE loads/stores. As the narrowing instructions do not accept sp as a register,
it makes little sense to optimise a FrameIndex into the load, only to have to
recover that later on. This adds a SelectTAddrModeImm7 which does not do that
folding, and uses it for narrowing load/store patterns.
Differential Revision: https://reviews.llvm.org/D67489
llvm-svn: 372134
Similar to D67327, but this time for the FP16 VLDR and VSTR instructions that
use the AddrMode5FP16 addressing mode. We need to reserve an emergency spill
slot for instructions that will be out of range to use sp directly.
AddrMode5FP16 is 8 bits with a scale of 2.
Differential Revision: https://reviews.llvm.org/D67483
llvm-svn: 372132
Remove setPreservesCFG from ARMConstantIslandPass and add a couple
of -verify-machine-dom-info instances into the existing codegen
tests.
llvm-svn: 372126
Before this patch we gave a priority to a dynamic table found
from the section header.
It was discussed (here: https://reviews.llvm.org/D67078?id=218356#inline-602082)
that probably preferring the table from PT_DYNAMIC is better,
because it is what runtime loader sees.
This patch makes the table from PT_DYNAMIC be chosen at first place if it is available.
But also it adds logic to fall back to SHT_DYNAMIC if the table from the dynamic segment is
broken or fall back to use no table if both are broken.
It adds a few more diagnostic warnings for the logic above.
Differential revision: https://reviews.llvm.org/D67547
llvm-svn: 372122
The static analyzer is warning about potential null dereferences of dyn_cast<> results, we can use cast<> directly as we know that these cases should all be CastInst, which is why its working atm and anyway cast<> will assert if they aren't.
llvm-svn: 372116
MVE loads and stores have a 7 bit immediate range, scaled by the length of the type. This needs to be taught to the stack estimation code to ensure that an emergency spill slot is reserved in case we run out of registers when materialising stack indices.
Also the narrowing loads/stores can be created with frame indices even though they do not accept SP as a register. We need in those cases to make sure we have an emergency register to use as the frame base, as SP can never be used.
Differential Revision: https://reviews.llvm.org/D67327
llvm-svn: 372114
Converting the *LoopStart pseudo instructions into DLS/WLS results in
LR being defined. These instructions were inserted on the assumption
that LR would already contain the loop counter because a mov is
introduced during ISel as the the consumers in the loop can only use
LR. That assumption proved wrong!
So perform a safety check, finding an appropriate place to insert the
DLS/WLS instructions or revert if this isn't possible.
Differential Revision: https://reviews.llvm.org/D67539
llvm-svn: 372111
We had a precompiled binary committed and not all of the relocations
supported were tested. This patch fixes this.
Differential revision: https://reviews.llvm.org/D67617
llvm-svn: 372110
We do not support them and fail with llvm_unreachable currently.
This is not the only target we do not support and also seems we are missing
the tests for those we have already. But I needed this one for another patch,
so posted it separatelly.
Relocation names are taken from llvm\include\llvm\BinaryFormat\ELFRelocs\PowerPC64.def
Differential revision: https://reviews.llvm.org/D67615
llvm-svn: 372109
Currently we only allow using a known named constants
for `Machine` field in YAML documents.
This patch allows using any numbers (valid or "unknown")
and adds test cases for current and new functionality.
With this it is possible to write a test cases for really unknown
EM_* targets.
Differential revision: https://reviews.llvm.org/D67652
llvm-svn: 372108
Follow-up to r371983. Referring to "this program" in the description of
the --version option in the documentation isn't exactly correct, because
the docs are not part of the program, and so "this program" doesn't
really refer to anything. This patch brings the other users of this
terminology into line with the new updates to llvm-size and
llvm-strings.
Reviewed by: alexshap, MaskRay
Differential Revision: https://reviews.llvm.org/D67618
llvm-svn: 372107
Most of the test changes are trivial instruction reorderings and differing
register allocations, without any obvious performance impact.
Differential Revision: https://reviews.llvm.org/D66973
llvm-svn: 372106
Summary:
There were segfaults as we modified and iterated the instruction maps in
the cache at the same time. This was happening because we created new
instructions while we populated the cache. This fix changes the order
in which we perform these actions. First, the caches for the whole
module are created, then we start to create abstract attributes.
I don't have a unit test but the LLVM test suite exposes this problem.
Reviewers: uenoku, sstefan1
Subscribers: hiraditya, bollu, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67232
llvm-svn: 372105
* Reordered MVT simple types to group scalable vector types
together.
* New range functions in MachineValueType.h to only iterate over
the fixed-length int/fp vector types.
* Stopped backends which don't support scalable vector types from
iterating over scalable types.
Reviewers: sdesmalen, greened
Reviewed By: greened
Differential Revision: https://reviews.llvm.org/D66339
llvm-svn: 372099
Support `llvm-ar h` and `llvm-ar -h` because they may be what users try
at first. Note, operation 'h' is undocumented in GNU ar.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D67560
llvm-svn: 372088
The "TODO" mentioned was:
"Add test for symbol with no name but with a value once yaml2obj allows
referencing symbols with no name from relocations."
We can do it now.
Differential revision: https://reviews.llvm.org/D67609
llvm-svn: 372087
The low-overhead branch extension provides a loop-end 'LE' instruction
that performs no decrement nor compare, it just jumps backwards. This
patch modifies the constant islands pass to try to insert LE
instructions in place of a Thumb2 conditional branch, instead of
shrinking it. This only happens if a cmp can be converted to a cbn/z
and used to exit the loop.
Differential Revision: https://reviews.llvm.org/D67404
llvm-svn: 372085
We use `< UP.Threshold` later on, so we should use LoopSize + 1, to
allow unrolling if the result won't exceed to loop size.
Fixes PR43305.
Reviewers: efriedma, dmgreen, paquette
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D67594
llvm-svn: 372084
It's a straightforward refactoring that allows to simplify and encapsulate the code.
Differential revision: https://reviews.llvm.org/D67624
llvm-svn: 372083
It is possible to use yaml2obj to create sections with overlapping sh_offset now.
This patch does that.
Differential revision: https://reviews.llvm.org/D67610
llvm-svn: 372081
This patch adds -Oz as option and also properly enables support for -Os.
Currently, the existing check for -Os is dead, because the enclosing if
only checks of O1, O2 and O3.
There is still a difference between the -Oz pipeline compared to opt,
but I have not been able to track that down yet.
Reviewers: bogner, sebpop, efriedma
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D67593
llvm-svn: 372079
Set this bit for the MVE reduction instructions to prevent a loop from
becoming tail predicated in their presence.
Differential Revision: https://reviews.llvm.org/D67444
llvm-svn: 372076
Summary: This patch introduces a helper struct `AnalysisGetter` to put together analysis getters. In this patch, a getter for `AAResult` is also added for `noalias`.
Reviewers: jdoerfert, sstefan1
Reviewed By: jdoerfert
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67603
llvm-svn: 372072
This makes git-llvm more of a thin wrapper around git while temporarily
maintaining backwards compatibility with past git-llvm behavior.
Using @{upstream} makes git-llvm more robust when used with a nontrivial
local repository.
https://reviews.llvm.org/D67389
llvm-svn: 372070
Previously we tried to split them into narrower v64i1 or v16i1
pieces that each got promoted to vXi8 and then passed in a zmm
or xmm register. But this crashes when you need to pass more
pieces than available registers reserved for argument passing.
The scalarizing done here generates much longer and slower code,
but is consistent with the behavior of avx2 and earlier targets
for these types.
Fixes PR43323.
llvm-svn: 372069
The BLENDM instructions allow an 2 sources and an independent
destination while masked VBROADCAST has the destination tied
to the source.
llvm-svn: 372068
