AAValueSimplify, AAValueConstantRange, and AAPotentialValues all look at
the IR by default. If queried for a IR position which has a
simplification callback we should either look at the callback return, or
give up. We do the latter for now.
It was writing to the source directory (which may not be writeable),
rather than using %t.
Fixes: a5dd6c6cf935 ("[LoopVectorize] Don't interleave scalar ordered reductions for inner loops")
We already have an indication (error) if the desired inline advisor
cannot be enabled, but we don't have a positive indication. Added
LLVM_DEBUG messages for the latter.
The dst/dstt/dstst/dststt instructions are nop's on all PowerPC
cores that AIX supports. The AIX assembler also does not accept
these mnemonics. Turn them into nop's on AIX (similar to dstall).
`StackAlignment` has only one use: `StackAlignment = std::max(StackAlignment, AI.getAlignment());` So it is redundant.
Reviewed By: vitalybuka, MTC
Differential Revision: https://reviews.llvm.org/D106741
As an instruction is replaced in optimizeTransposes RAUW will replace it in
the ShapeMap (ShapeMap is ValueMap so that uses are updated). In
finalizeLowering however we skip updating uses if they are in the ShapeMap
since they will be lowered separately at which point we pick up the lowered
operands.
In the testcase what happened was that since we replaced the doubled-transpose
with the shuffle, it ended up in the ShapeMap. As we lowered the
columnwise-load the use in the shuffle was not updated. Then as we removed
the original columnwise-load we changed that to an undef. I.e. we ended up
with:
```
%shuf = shufflevector <8 x double> undef, <8 x double> poison, <6 x i32>
^^^^^
<i32 0, i32 1, i32 2, i32 4, i32 5, i32 6>
```
Besides the fix itself, I have fortified this last bit. As we change uses to
undef when removing instruction we track the undefed instruction to make sure
we eventually remove those too. This would have caught the issue at compile
time.
Differential Revision: https://reviews.llvm.org/D106714
The current JumpThreading pass does not jump thread loops since it can
result in irreducible control flow that harms other optimizations. This
prevents switch statements inside a loop from being optimized to use
unconditional branches.
This code pattern occurs in the core_state_transition function of
Coremark. The state machine can be implemented manually with goto
statements resulting in a large runtime improvement, and this transform
makes the switch implementation match the goto version in performance.
This patch specifically targets switch statements inside a loop that
have the opportunity to be threaded. Once it identifies an opportunity,
it creates new paths that branch directly to the correct code block.
For example, the left CFG could be transformed to the right CFG:
```
sw.bb sw.bb
/ | \ / | \
case1 case2 case3 case1 case2 case3
\ | / / | \
latch.bb latch.2 latch.3 latch.1
br sw.bb / | \
sw.bb.2 sw.bb.3 sw.bb.1
br case2 br case3 br case1
```
Co-author: Justin Kreiner @jkreiner
Co-author: Ehsan Amiri @amehsan
Reviewed By: SjoerdMeijer
Differential Revision: https://reviews.llvm.org/D99205
This expands the cost model test for min/max to many more types,
including floating point minnum/maxnum and minimum/maximum, and FP16
with and without fullfp16. The old llc run lines are removed, as those
are better tested by CodeGen tests.
Patch by Mohammad Fawaz
This patch allows lifetime calls to be ignored (and later erased) if we
know that the copy-constant-to-alloca optimization is going to happen.
The case that is missed is when the global variable is in a different address
space than the alloca (as shown in the example added to the lit test.)
This used to work before 6da31fa4a6
Differential Revision: https://reviews.llvm.org/D106573
Consider the following loop:
void foo(float *dst, float *src, int N) {
for (int i = 0; i < N; i++) {
dst[i] = 0.0;
for (int j = 0; j < N; j++) {
dst[i] += src[(i * N) + j];
}
}
}
When we are not building with -Ofast we may attempt to vectorise the
inner loop using ordered reductions instead. In addition we also try
to select an appropriate interleave count for the inner loop. However,
when choosing a VF=1 the inner loop will be scalar and there is existing
code in selectInterleaveCount that limits the interleave count to 2
for reductions due to concerns about increasing the critical path.
For ordered reductions this problem is even worse due to the additional
data dependency, and so I've added code to simply disable interleaving
for scalar ordered reductions for now.
Test added here:
Transforms/LoopVectorize/AArch64/strict-fadd-vf1.ll
Differential Revision: https://reviews.llvm.org/D106646
This is partially a workaround. SILowerI1Copies does not understand
unstructured loops. This would result in inserting instructions to
merge a mask register in the same block where it was defined in an
unstructured loop.
Replace the clang builtins and LLVM intrinsics for the SIMD extmul instructions
with normal codegen patterns.
Differential Revision: https://reviews.llvm.org/D106724
- This patch consists of the bare basic code needed in order to generate some assembly for the z/OS target.
- Only the .text and the .bss sections are added for now.
- The relevant MCSectionGOFF/Symbol interfaces have been added. This enables us to print out the GOFF machine code sections.
- This patch enables us to add simple lit tests wherever possible, and contribute to the testing coverage for the z/OS target
- Further improvements and additions will be made in future patches.
Reviewed By: tmatheson
Differential Revision: https://reviews.llvm.org/D106380
When hoisting/moving calls to locations, we strip unknown metadata. Such calls are usually marked `speculatable`, i.e. they are guaranteed to not cause undefined behaviour when run anywhere. So, we should strip attributes that can cause immediate undefined behaviour if those attributes are not valid in the context where the call is moved to.
This patch introduces such an API and uses it in relevant passes. See
updated tests.
Fix for PR50744.
Reviewed By: nikic, jdoerfert, lebedev.ri
Differential Revision: https://reviews.llvm.org/D104641
This reverts commit 1cfecf4fc4278afb0005923f6dff595cd372da5c.
This commit broke LLVM code generated through XLA by removing a
conditional on Ld->getExtensionType() == ISD::NON_EXTLOAD
This is not a perfect revert. The new function is left as other uses of
it exist now.
This reverts commit d7bbb1230a94cb239aa4a8cb896c45571444675d.
There were follow up uses of a deleted method and I didn't run the
tests. Undo the revert, so I can do it properly.
This reverts commit 1cfecf4fc4278afb0005923f6dff595cd372da5c.
This commit broke LLVM code generated through XLA by removing a
conditional on Ld->getExtensionType() == ISD::NON_EXTLOAD
Avoid several crashes when DBG_INSTR_REF and DBG_PHI instructions are fed
to the instruction scheduler. DBG_INSTR_REFs should be treated like
DBG_LABELs, and just ignored for the purpose of scheduling [0].
DBG_PHIs however behave much more like DBG_VALUEs: they refer to register
operands, and if some register defs get shuffled around during instruction
scheduling, there's a risk that the debug instr will refer to the wrong
value. There's already a facility for updating DBG_VALUEs to reflect this;
add DBG_PHI to the list of instructions that it will update.
[0] Suboptimal, but it's what instr scheduling does right now.
Differential Revision: https://reviews.llvm.org/D106663
The Exit instruction passed in for checking if it's an ordered reduction need not be
an FPAdd operation. We need to bail out at that point instead of
assuming it is an FPAdd (and hence has two operands). See added testcase.
It crashes without the patch because the Exit instruction is a phi with
exactly one operand.
This latent bug was exposed by 95346ba which added support for
multi-exit loops for vectorization.
Reviewed-By: kmclaughlin
Differential Revision: https://reviews.llvm.org/D106843
This reapplies commit 76f3ffb2b285998f02639db8fd42fb0de8a540d0 that was
reverted due to buildbot failures.
- Update lit tests with REQUIRES condition.
- Abandon salvage attempt if SCEVUnknown::getValue() returns nullptr.
Differential Revision: https://reviews.llvm.org/D105207
When working out which instruction defines a value, the
instruction-referencing variable location code has a few special cases for
physical registers:
* Arguments are never defined by instructions,
* Constant physical registers always read the same value, are never def'd
This patch adds a third case for the llvm.frameaddress intrinsics: you can
read the framepointer in any block if you so choose, and use it as a
variable location, as shown in the added test.
This rather violates one of the assumptions behind instruction referencing,
that LLVM-ir shouldn't be able to read from an arbitrary register at some
arbitrary point in the program. The solution for now is to just emit a
DBG_PHI that reads the register value: this works, but if we wanted to do
something clever with DBG_PHIs in the future then this would probably get
in the way. As it stands, this patch avoids a crash.
Differential Revision: https://reviews.llvm.org/D106659
This patch extends salvaging of debuginfo in the Loop Strength Reduction
(LSR) pass by translating Scalar Evaluations (SCEV) into DIExpressions.
The method is as follows:
- Cache dbg.value intrinsics that are salvageable.
- Obtain a loop Induction Variable (IV) from ScalarExpressionExpander or
the loop header.
- Translate the IV SCEV into an expression that recovers the current
loop iteration count. Combine this with the dbg.value's location
op SCEV to create a DIExpression that salvages the value.
Review by: jmorse
Differential Revision: https://reviews.llvm.org/D105207
The loop vectorizer may decide to use tail folding when the trip-count
is low. When that happens, scalable VFs are no longer a candidate,
since tail folding/predication is not yet supported for scalable vectors.
This can be re-enabled in a future patch.
Reviewed By: kmclaughlin
Differential Revision: https://reviews.llvm.org/D106657
This patch builds on top of D106575 in which scalable-vector splats were
supported in `ISD::matchBinaryPredicate`. It teaches the DAGCombiner how
to perform a variety of the pre-existing saturating add/sub combines on
scalable-vector types.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D106652
This patch adds support for lowering the saturating vector add/sub
intrinsics to RVV instructions, for both fixed-length and
scalable-vector forms alike.
Note that some of the DAG combines are still not triggering for the
scalable-vector tests. These require a bit more work in the DAGCombiner
itself.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D106651
This patch adds the zero instruction for zeroing a list of 64-bit
element ZA tiles. The instruction takes a list of up to eight tiles
ZA0.D-ZA7.D, which must be in order, e.g.
zero {za0.d,za1.d,za2.d,za3.d,za4.d,za5.d,za6.d,za7.d}
zero {za1.d,za3.d,za5.d,za7.d}
The assembler also accepts 32-bit, 16-bit and 8-bit element tiles which
are mapped to corresponding 64-bit element tiles in accordance with the
architecturally defined mapping between different element size tiles,
e.g.
* Zeroing ZA0.B, or the entire array name ZA, is equivalent to zeroing
all eight 64-bit element tiles ZA0.D to ZA7.D.
* Zeroing ZA0.S is equivalent to zeroing ZA0.D and ZA4.D.
The preferred disassembly of this instruction uses the shortest list of
tile names that represent the encoded immediate mask, e.g.
* An immediate which encodes 64-bit element tiles ZA0.D, ZA1.D, ZA4.D and
ZA5.D is disassembled as {ZA0.S, ZA1.S}.
* An immediate which encodes 64-bit element tiles ZA0.D, ZA2.D, ZA4.D and
ZA6.D is disassembled as {ZA0.H}.
* An all-ones immediate is disassembled as {ZA}.
* An all-zeros immediate is disassembled as an empty list {}.
This patch adds the MatrixTileList asm operand and related parsing to support
this.
Depends on D105570.
The reference can be found here:
https://developer.arm.com/documentation/ddi0602/2021-06
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D105575
These will be optimized by upcoming patches. The tests are primarily not
being optimized due to the lack of support for saturating vector
arithmetic in the RISC-V backend.
On top of that, however, a large percentage of the scalable-vector tests
are also lacking support in the DAGCombiner: either in
`ISD::matchBinaryPredicate` or due to checks specifically for
`BUILD_VECTOR` and not `SPLAT_VECTOR`.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D106649
This implements the isLoadFromStackSlot and isStoreToStackSlot for MVE
MVE_VSTRWU32 and MVE_VLDRWU32 functions. They behave the same as many
other loads/stores, expecting a FI in Op1 and zero offset in Op2. At the
same time this alters VLDR_P0_off and VSTR_P0_off to use the same code
too, as they too should be returning VPR in Op0, take a FI in Op1 and
zero offset in Op2.
Differential Revision: https://reviews.llvm.org/D106797
