This reverts commit f47d6b38c7a61d50db4566b02719de05492dcef1 (r352791).
Seems to run into compilation failures with GCC (but not clang, where
I tested it). Reverting while I investigate.
llvm-svn: 352800
This patch fixes pr39098.
For the attached test case, CombineZExtLogicopShiftLoad can optimize it to
t25: i64 = Constant<1099511627775>
t35: i64 = Constant<0>
t0: ch = EntryToken
t57: i64,ch = load<(load 4 from `i40* undef`, align 8), zext from i32> t0, undef:i64, undef:i64
t58: i64 = srl t57, Constant:i8<1>
t60: i64 = and t58, Constant:i64<524287>
t29: ch = store<(store 5 into `i40* undef`, align 8), trunc to i40> t57:1, t60, undef:i64, undef:i64
But later visitANDLike transforms it to
t25: i64 = Constant<1099511627775>
t35: i64 = Constant<0>
t0: ch = EntryToken
t57: i64,ch = load<(load 4 from `i40* undef`, align 8), zext from i32> t0, undef:i64, undef:i64
t61: i32 = truncate t57
t63: i32 = srl t61, Constant:i8<1>
t64: i32 = and t63, Constant:i32<524287>
t65: i64 = zero_extend t64
t58: i64 = srl t57, Constant:i8<1>
t60: i64 = and t58, Constant:i64<524287>
t29: ch = store<(store 5 into `i40* undef`, align 8), trunc to i40> t57:1, t60, undef:i64, undef:i64
And it triggers CombineZExtLogicopShiftLoad again, causes a dead loop.
Both forms should generate same instructions, CombineZExtLogicopShiftLoad generated IR looks cleaner. But it looks more difficult to prevent visitANDLike to do the transform, so I prevent CombineZExtLogicopShiftLoad to do the transform if the ZExt is free.
Differential Revision: https://reviews.llvm.org/D57491
llvm-svn: 352792
The FunctionCallee type is effectively a {FunctionType*,Value*} pair,
and is a useful convenience to enable code to continue passing the
result of getOrInsertFunction() through to EmitCall, even once pointer
types lose their pointee-type.
Then:
- update the CallInst/InvokeInst instruction creation functions to
take a Callee,
- modify getOrInsertFunction to return FunctionCallee, and
- update all callers appropriately.
One area of particular note is the change to the sanitizer
code. Previously, they had been casting the result of
`getOrInsertFunction` to a `Function*` via
`checkSanitizerInterfaceFunction`, and storing that. That would report
an error if someone had already inserted a function declaraction with
a mismatching signature.
However, in general, LLVM allows for such mismatches, as
`getOrInsertFunction` will automatically insert a bitcast if
needed. As part of this cleanup, cause the sanitizer code to do the
same. (It will call its functions using the expected signature,
however they may have been declared.)
Finally, in a small number of locations, callers of
`getOrInsertFunction` actually were expecting/requiring that a brand
new function was being created. In such cases, I've switched them to
Function::Create instead.
Differential Revision: https://reviews.llvm.org/D57315
llvm-svn: 352791
CMake 3.6 introduced CMAKE_TRY_COMPILE_PLATFORM_VARIABLES, which solves
precisely the problem that necessitated init_user_prop, so we can switch
over whenever we bump our minimum CMake requirement.
llvm-svn: 352790
Summary:
EarlyCSE needs to optimize MemoryPhis after an access is removed and has
special handling for it. This should be handled by MemorySSA instead.
The default remains that MemoryPhis are *not* optimized after an access
is removed.
Reviewers: george.burgess.iv
Subscribers: sanjoy, jlebar, llvm-commits, Prazek
Differential Revision: https://reviews.llvm.org/D57199
llvm-svn: 352787
Summary:
Like with X86, this allows better DAG-level alias analysis and
alignment inference for wrapped addresses.
Reviewers: jonpa, uweigand
Reviewed By: uweigand
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D57407
llvm-svn: 352786
Summary:
Previously, llvm-nm would report symbols for .debug and .note sections as: '?' with an empty section name:
```
00000000 ?
00000000 ?
...
```
With this patch the output more closely resembles GNU nm:
```
00000000 N .debug_abbrev
00000000 n .note.GNU-stack
...
```
This patch calls `getSectionName` for sections that belong to symbols of type `ELF::STT_SECTION`, which returns the name of the section from the section string table.
Reviewers: Bigcheese, davide, jhenderson
Reviewed By: davide, jhenderson
Subscribers: rupprecht, jhenderson, llvm-commits
Differential Revision: https://reviews.llvm.org/D57105
llvm-svn: 352785
While dangling nodes will eventually be pruned when they are
considered, leaving them disables combines requiring single-use.
Reviewers: Carrot, spatel, craig.topper, RKSimon, efriedma
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D57520
llvm-svn: 352784
r zero scale SMULFIX, expand into MUL which produces better code for X86.
For vector arguments, expand into MUL if SMULFIX is provided with a zero scale.
Otherwise, expand into MULH[US] or [US]MUL_LOHI.
Differential Revision: https://reviews.llvm.org/D56987
llvm-svn: 352783
This ensures that if we make it to the backend w/o lowering widenable_conditions first, that we generate correct code. Doing it in CGP - instead of isel - let's us fold control flow before hitting block local instruction selection.
Differential Revision: https://reviews.llvm.org/D57473
llvm-svn: 352779
The original commit of this function (r129800 in 2011) had a typo where
part of the "Micro" version check was actually comparing against the "Minor"
version number.
llvm-svn: 352776
Similar to what we already do in DAGCombiner, but this version also handles bitcasts from types with different scalar sizes, which x86 is better at handling.
Differential Revision: https://reviews.llvm.org/D57514
llvm-svn: 352773
Summary:
Include the symbol being defined in the list of requirements for using --localize-symbol.
This is used, for example, when someone is depending on two different projects that have the same (or close enough) method defined in each library, and using "-L sym" for a conflicting symbol in one of the libraries so that the definition from the other one is used. However, the library may have internal references to the symbol, which cause program crashes when those are used, i.e.:
```
$ cat foo.c
int foo() { return 5; }
$ cat bar.c
int foo();
int bar() { return 2 * foo(); }
$ cat foo2.c
int foo() { /* Safer implementation */ return 42; }
$ cat main.c
int bar();
int main() {
__builtin_printf("bar = %d\n", bar());
return 0;
}
$ ar rcs libfoo.a foo.o bar.o
$ ar rcs libfoo2.a foo2.o
# Picks the wrong foo() impl
$ clang main.o -lfoo -lfoo2 -L. -o main
# Picks the right foo() impl
$ objcopy -L foo libfoo.a && clang main.o -lfoo -lfoo2 -L. -o main
# Links somehow, but crashes at runtime
$ llvm-objcopy -L foo libfoo.a && clang main.o -lfoo -lfoo2 -L. -o main
```
Reviewers: jhenderson, alexshap, jakehehrlich, espindola
Subscribers: emaste, arichardson
Differential Revision: https://reviews.llvm.org/D57417
llvm-svn: 352767
This is the most important uaddo problem mentioned in PR31754:
https://bugs.llvm.org/show_bug.cgi?id=31754
We were failing to match the canonicalized pattern when it's an 'add 1' operation.
Pattern matching, however, shouldn't assume that we have canonicalized IR, so we
match 4 commuted variants of uaddo.
There's also a test with a crazy type to show that the existing CGP transform
based on this matcher is not limited by target legality checks, but that's a
different problem.
Differential Revision: https://reviews.llvm.org/D57516
llvm-svn: 352766
Summary:
COFF requires that COMDAT name match that of the leader. When we promote
and rename an internal leader in ThinLTO due to an import, ensure we
subsequently rename the associated COMDAT. Similar to D31963 which did
this during ThinLTO module splitting.
Fixes PR40414.
Reviewers: pcc, inglorion
Subscribers: mehdi_amini, dexonsmith, dmajor, llvm-commits
Differential Revision: https://reviews.llvm.org/D57395
llvm-svn: 352763
This is the fourth (and final for now) of a series of patches
simplifying llvm-symbolizer tests. See r352752, r352753 and 352754 for
the previous ones. This patch splits out several more distinct test
cases from llvm-symbolizer.test into separate tests, and simplifies them
in various ways including:
1) Building a test case for spaces in path from source, rather than
using a pre-canned binary. This allows deleting of said binary and the
source it was built from.
2) Switching to specifying addresses and objects directly on the
command-line rather than via stdin.
This also adds an explict test for the ability to specify a file and
address as a line in stdin, since the majority of the tests have been
migrated away from this approach, leaving this largely untested.
Reviewed by: dblaikie
Differential Revision: https://reviews.llvm.org/D57446
llvm-svn: 352756
This is the third of a series of patches simplifying llvm-symbolizer
tests. See r352752 and r352753 for the previous two. This patch splits
out a number of distinct test cases from llvm-symbolizer.test into
separate tests, and simplifies them in various ways including:
1) using --obj/positional arguments for the input file and addresses
instead of stdin,
2) using runtime-generated inputs rather than a pre-canned binary, and
3) testing more specifically (i.e. checking only what is interesting to
the behaviour changed in the original commit for that test case).
This patch also removes the test case for using --obj. The
tools/llvm-symbolizer/basic.s test already tests this case. Finally,
this patch adds a simple test case to the demangle switch test case to
show that demangling happens by default.
See https://bugs.llvm.org/show_bug.cgi?id=40070#c1 for the motivation.
Reviewed by: dblaikie
Differential Revision: https://reviews.llvm.org/D57446
llvm-svn: 352754
This is the second of a series of patches simplifying llvm-symbolizer
tests. See r352752 for the first. This one splits out 5 distinct test
cases from llvm-symbolizer.test into separate tests, and simplifies them
slightly by using --obj/positional arguments for the input file and
addresses instead of stdin.
See https://bugs.llvm.org/show_bug.cgi?id=40070#c1 for the motivation.
Reviewed by: dblaikie
Differential Revision: https://reviews.llvm.org/D57443
llvm-svn: 352753
This change migrates most llvm-symbolizer tests away from reading input
via stdin and instead using --obj + positional arguments for the file
and addresses respectively, which makes the tests easier to read.
One exception is the test test/tools/llvm-symbolizer/pdb/pdb.test, which
was doing some manipulation on the input addresses. This patch
simplifies this somewhat, but it still reads from stdin.
More changes to follow to simplify/break-up other tests.
Reviewed by: dblaikie
Differential Revision: https://reviews.llvm.org/D57441
llvm-svn: 352752
In order to make an option value truly optional, both the ValueOptional
and an empty-named value are required. This empty-named value appears in
the command-line help text, which is not ideal.
This change improves the help text for these sort of options in a number
of ways:
1) ValueOptional options with an empty-named value now print their help
text twice: both without and then with '=<value>' after the name. The
latter version then lists the allowed values after it.
2) Empty-named values with no help text in ValueOptional options are not
listed in the permitted values.
3) Otherwise empty-named options are printed as =<empty> rather than
simply '='.
4) Option values without help text do not have the '-' separator
printed.
It also tweaks the llvm-symbolizer -functions help text to not print a
trailing ':' as that looks bad combined with 1) above.
Reviewed by: thopre, ruiu
Differential Revision: https://reviews.llvm.org/D57030
llvm-svn: 352750
Enables 32/64-bit scalar load broadcasts on AVX1 targets
The extractelement-load.ll regression will be fixed shortly in a followup commit.
llvm-svn: 352743
If we're not inserting the broadcast into the lowest subvector then we can avoid the insertion by just performing a larger broadcast.
Avoids a regression when we enable AVX1 broadcasts in shuffle combining
llvm-svn: 352742
Introduces a pass that provides default lowering strategy for the
`experimental.widenable.condition` intrinsic, replacing all its uses with
`i1 true`.
Differential Revision: https://reviews.llvm.org/D56096
Reviewed By: reames
llvm-svn: 352739
Constants can also be materialised using the negated value and a MVN, and this
case seem to have been missed for Thumb2. To check the constant materialisation
costs, we now call getT2SOImmVal twice, once for the original constant and then
also for its negated value, and this function checks if the constant can both
be splatted or rotated.
This was revealed by a test that optimises for minsize: instead of a LDR
literal pool load and having a literal pool entry, just a MVN with an immediate
is smaller (and also faster).
Differential Revision: https://reviews.llvm.org/D57327
llvm-svn: 352737
And instead just generate a libcall. My motivating example on ARM was a simple:
shl i64 %A, %B
for which the code bloat is quite significant. For other targets that also
accept __int128/i128 such as AArch64 and X86, it is also beneficial for these
cases to generate a libcall when optimising for minsize. On these 64-bit targets,
the 64-bits shifts are of course unaffected because the SHIFT/SHIFT_PARTS
lowering operation action is not set to custom/expand.
Differential Revision: https://reviews.llvm.org/D57386
llvm-svn: 352736
On Unix/Mac OS X, normpath() returns the path unchanged (FileCheck), but
on case-insensitive filesystems (like NTFS on Windows), it converts the
path to lowercase (filecheck) which was causing the test to fail.
llvm-svn: 352735
Previously, there were two different scripts for generating VCS headers:
one used by LLVM and one used by Clang. They were both similar, but
different. They were both broken in their own ways, for example the one
used by Clang didn't properly handle monorepo resulting in an incorrect
version information reported by Clang.
This change unifies two the scripts by introducing a new script that's
used from both LLVM and Clang, ensures that the new script supports both
monorepo and standalone SVN and Git setups, and removes the old scripts.
Differential Revision: https://reviews.llvm.org/D57063
llvm-svn: 352729
Currently SCEV attempts to limit transformations so that they do not work with
big SCEVs (that may take almost infinite compile time). But for this, it uses heuristics
such as recursion depth and number of operands, which do not give us a guarantee
that we don't actually have big SCEVs. This situation is still possible, though it is not
likely to happen. However, the bug PR33494 showed a bunch of simple corner case
tests where we still produce huge SCEVs, even not reaching big recursion depth etc.
This patch introduces a concept of 'huge' SCEVs. A SCEV is huge if its expression
size (intoduced in D35989) exceeds some threshold value. We prohibit optimizing
transformations if any of SCEVs we are dealing with is huge. This gives us a reliable
check that we don't spend too much time working with them.
As the next step, we can possibly get rid of old limiting mechanisms, such as recursion
depth thresholds.
Differential Revision: https://reviews.llvm.org/D35990
Reviewed By: reames
llvm-svn: 352728
