This enables TableGen to generate an additional two operand
matcher for our shift_rotate_imm and shift_rotate_reg class of instructions.
The tests were also updated so that they include now encoding information
for all affected instructions.
llvm-svn: 206398
Summary:
- Conditional moves acting on 64-bit GPR's should require MIPS-IV rather than MIPS64
- ISD::MUL, and ISD::MULH[US] should be lowered on all 64-bit ISA's
Patch by David Chisnall
His work was sponsored by: DARPA, AFRL
I've added additional testcases to cover as much of the codegen changes
affecting MIPS-IV as I can. Where I've been unable to find an existing
MIPS64 testcase that can be re-used for MIPS-IV (mainly tests covering
ISD::GlobalAddress and similar), I at least agree that MIPS-IV should
behave like MIPS64. Further testcases that are fixed by this patch will follow
in my next commit. The testcases from that commit that fail for MIPS-IV without
this patch are:
LLVM :: CodeGen/Mips/2010-07-20-Switch.ll
LLVM :: CodeGen/Mips/cmov.ll
LLVM :: CodeGen/Mips/eh-dwarf-cfa.ll
LLVM :: CodeGen/Mips/largeimmprinting.ll
LLVM :: CodeGen/Mips/longbranch.ll
LLVM :: CodeGen/Mips/mips64-f128.ll
LLVM :: CodeGen/Mips/mips64directive.ll
LLVM :: CodeGen/Mips/mips64ext.ll
LLVM :: CodeGen/Mips/mips64fpldst.ll
LLVM :: CodeGen/Mips/mips64intldst.ll
LLVM :: CodeGen/Mips/mips64load-store-left-right.ll
LLVM :: CodeGen/Mips/sint-fp-store_pattern.ll
Reviewers: dsanders
Reviewed By: dsanders
CC: matheusalmeida
Differential Revision: http://reviews.llvm.org/D3343
llvm-svn: 206183
Summary:
Similarly, the HasMips64 on the 64-bit move InstAlias is a test for 64-bit
GPR's.
No functional change.
Reviewers: matheusalmeida
Reviewed By: matheusalmeida
Differential Revision: http://reviews.llvm.org/D3263
llvm-svn: 205968
Summary:
They behave in accordance with the Has2008 and ABS2008 configuration bits of the processor which are used to select between the 1985 and 2008 versions of IEEE 754. In 1985 mode, these instructions are arithmetic (i.e. they raise invalid operation exceptions when given NaN), in 2008 mode they are non-arithmetic (i.e. they are copies).
nmadd.[ds], and nmsub.[ds] are still subject to -enable-no-nans-fp-math because the ISA spec does not explicitly state that they obey Has2008 and ABS2008.
Fixed the issue with the previous version of this patch (r205628). A pre-existing 'let Predicate =' statement was removing some predicates that were necessary for FP64 to behave correctly.
Reviewers: matheusalmeida
Reviewed By: matheusalmeida
Differential Revision: http://llvm-reviews.chandlerc.com/D3274
llvm-svn: 205844
Summary:
They behave in accordance with the Has2008 and ABS2008 configuration bits of the
processor which are used to select between the 1985 and 2008 versions of IEEE
754. In 1985 mode, these instructions are arithmetic (i.e. they raise invalid
operation exceptions when given NaN), in 2008 mode they are non-arithmetic
(i.e. they are copies).
nmadd.[ds], and nmsub.[ds] are still subject to -enable-no-nans-fp-math because
the ISA spec does not explicitly state that they obey Has2008 and ABS2008.
Reviewers: matheusalmeida
Reviewed By: matheusalmeida
Differential Revision: http://llvm-reviews.chandlerc.com/D3274
llvm-svn: 205628
Summary:
Highlights:
- Registers are resolved much later (by the render method).
Prior to that point, GPR32's/GPR64's are GPR's regardless of register
size. Similarly FGR32's/FGR64's/AFGR64's are FGR's regardless of register
size or FR mode. Numeric registers can be anything.
- All registers are parsed the same way everywhere (even when handling
symbol aliasing)
- One consequence is that all registers can be specified numerically
almost anywhere (e.g. $fccX, $wX). The exception is symbol aliasing
but that can be easily resolved.
- Removes the need for the hasConsumedDollar hack
- Parenthesis and Bracket suffixes are handled generically
- Micromips instructions are parsed directly instead of going through the
standard encodings first.
- rdhwr accepts all 32 registers, and the following instructions that previously
xfailed now work:
ddiv, ddivu, div, divu, cvt.l.[ds], se[bh], wsbh, floor.w.[ds], c.ngl.d,
c.sf.s, dsbh, dshd, madd.s, msub.s, nmadd.s, nmsub.s, swxc1
- Diagnostics involving registers point at the correct character (the $)
- There's only one kind of immediate in MipsOperand. LSA immediates are handled
by the predicate and renderer.
Lowlights:
- Hardcoded '$zero' in the div patterns is handled with a hack.
MipsOperand::isReg() will return true for a k_RegisterIndex token
with Index == 0 and getReg() will return ZERO for this case. Note that it
doesn't return ZERO_64 on isGP64() targets.
- I haven't cleaned up all of the now-unused functions.
Some more of the generic parser could be removed too (integers and relocs
for example).
- insve.df needed a custom decoder to handle the implicit fourth operand that
was needed to make it parse correctly. The difficulty was that the matcher
expected a Token<'0'> but gets an Imm<0>. Adding an implicit zero solved this.
Reviewers: matheusalmeida, vmedic
Reviewed By: matheusalmeida
Differential Revision: http://llvm-reviews.chandlerc.com/D3222
llvm-svn: 205292
Summary:
Highlights:
- Registers are resolved much later (by the render method).
Prior to that point, GPR32's/GPR64's are GPR's regardless of register
size. Similarly FGR32's/FGR64's/AFGR64's are FGR's regardless of register
size or FR mode. Numeric registers can be anything.
- All registers are parsed the same way everywhere (even when handling
symbol aliasing)
- One consequence is that all registers can be specified numerically
almost anywhere (e.g. $fccX, $wX). The exception is symbol aliasing
but that can be easily resolved.
- Removes the need for the hasConsumedDollar hack
- Parenthesis and Bracket suffixes are handled generically
- Micromips instructions are parsed directly instead of going through the
standard encodings first.
- rdhwr accepts all 32 registers, and the following instructions that previously
xfailed now work:
ddiv, ddivu, div, divu, cvt.l.[ds], se[bh], wsbh, floor.w.[ds], c.ngl.d,
c.sf.s, dsbh, dshd, madd.s, msub.s, nmadd.s, nmsub.s, swxc1
- Diagnostics involving registers point at the correct character (the $)
- There's only one kind of immediate in MipsOperand. LSA immediates are handled
by the predicate and renderer.
Lowlights:
- Hardcoded '$zero' in the div patterns is handled with a hack.
MipsOperand::isReg() will return true for a k_RegisterIndex token
with Index == 0 and getReg() will return ZERO for this case. Note that it
doesn't return ZERO_64 on isGP64() targets.
- I haven't cleaned up all of the now-unused functions.
Some more of the generic parser could be removed too (integers and relocs
for example).
- insve.df needed a custom decoder to handle the implicit fourth operand that
was needed to make it parse correctly. The difficulty was that the matcher
expected a Token<'0'> but gets an Imm<0>. Adding an implicit zero solved this.
Reviewers: matheusalmeida, vmedic
Reviewed By: matheusalmeida
Differential Revision: http://llvm-reviews.chandlerc.com/D3222
llvm-svn: 205229
This enables TableGen to generate an additional two operand matcher
for our ArithLogicR class of instructions (constituted by 3 register operands).
E.g.: and $1, $2 <=> and $1, $1, $2
llvm-svn: 204826
The Octeon cpu from Cavium Networks is mips64r2 based and has an extended
instruction set. In order to utilize this with LLVM, a new cpu feature "octeon"
and a subtarget feature "cnmips" is added. A small set of new instructions
(baddu, dmul, pop, dpop, seq, sne) is also added. LLVM generates dmul, pop and
dpop instructions with option -mcpu=octeon or -mattr=+cnmips.
llvm-svn: 204337
Summary:
Parts of the compiler still believed MSA load/stores have a 16-bit offset when
it is actually 10-bit. Corrected this, and fixed a closely related issue this
uncovered where load/stores with 10-bit and 12-bit offsets (MSA and microMIPS
respectively) could not load/store using offsets from the stack/frame pointer.
They accepted frameindex+offset, but not frameindex by itself.
Reviewers: jacksprat, matheusalmeida
Reviewed By: jacksprat
Differential Revision: http://llvm-reviews.chandlerc.com/D2888
llvm-svn: 202717
This patch adds NaCl target for Mips. It also forbids indexed loads and
stores if the target is NaCl.
Patch by Sasa Stankovic.
Differential Revision: http://llvm-reviews.chandlerc.com/D2690
llvm-svn: 200855
IIImul -> II_MUL
IIImult -> II_MULT, II_MULTU, II_MADD, II_MADDU, II_MSUB, II_MSUBU, II_DMULT, II_DMULTU
No functional change since the InstrItinData's have been duplicated.
llvm-svn: 199495
This is necessary because the classes are shared between all implementations.
No functional change since the InstrItinData's have been duplicated.
llvm-svn: 199394
IIArith -> II_ADD, II_ADDU, II_AND, II_CL[ZO], II_DADDIU, II_DADDU,
II_DROTR, II_DROTR32, II_DROTRV, II_DSLL, II_DSLL32, II_DSLLV,
II_DSR[AL], II_DSR[AL]32, II_DSR[AL]V, II_DSUBU, II_LUI, II_MOV[ZFNT],
II_NOR, II_OR, II_RDHWR, II_ROTR, II_ROTRV, II_SLL, II_SLLV, II_SR[AL],
II_SR[AL]V, II_SUBU, II_XOR
No functional change since the InstrItinData's have been duplicated.
This is necessary because the classes are shared between all schedulers.
Once this patch series is committed there will be an InstrItinClass for
each mnemonic with minimal grouping. This does increase the size of the
itinerary tables for each MIPS scheduler but we have a few options for dealing
with that later. These options include reducing the number of classes once
we see the best way to simplify them, or by extending tablegen to be able
to compress the table by eliminating duplicates entries, etc.
llvm-svn: 199391
not being correctly encoded/decoded.
In more detail, immediate fields of LD/ST instructions should be
divided/multiplied by the size of the data format before encoding and
after decoding, respectively.
llvm-svn: 196494
Before I just ported the shell of the pass. I've tried to keep everything
nearly identical to the ARM version. I think it will be very easy to eventually
merge these two and create a new more general pass that other targets can
use. I have some improvements I would like to make to allow pools to
be shared across functions and some other things. When I'm all done we
can think about making a more general pass. More to be ported but the
basic mechanism works now almost as good as gcc mips16.
llvm-svn: 193509
accumulator instead of its sub-registers, $hi and $lo.
We need this change to prevent a mflo following a mtlo from reading an
unpredictable/undefined value, as shown in the following example:
mult $6, $7 // result of $6 * $7 is written to $lo and $hi.
mflo $2 // read lower 32-bit result from $lo.
mtlo $4 // write to $lo. the content of $hi becomes unpredictable.
mfhi $3 // read higher 32-bit from $hi, which has an unpredictable value.
I don't have a test case for this change that reliably reproduces the problem.
llvm-svn: 192119
