- More informative message when extension name is not an identifier token.
- Stop parsing directive if extension is unknown (avoid duplicate error
messages).
- Report unsupported extensions with a source location, rather than
report_fatal_error.
Differential Revision: https://reviews.llvm.org/D22806
llvm-svn: 276748
This option, compatible with gas's -mimplicit-it, controls the
generation/checking of implicit IT blocks in ARM/Thumb assembly.
This option allows two behaviours that were not possible before:
- When in ARM mode, emit a warning when assembling a conditional
instruction that is not in an IT block. This is enabled with
-mimplicit-it=never and -mimplicit-it=thumb.
- When in Thumb mode, automatically generate IT instructions when an
instruction with a condition code appears outside of an IT block. This
is enabled with -mimplicit-it=thumb and -mimplicit-it=always.
The default option is -mimplicit-it=arm, which matches the existing
behaviour (allow conditional ARM instructions outside IT blocks without
warning, and error if a conditional Thumb instruction is outside an IT
block).
The general strategy for generating IT blocks in Thumb mode is to keep a
small list of instructions which should be in the IT block, and only
emit them when we encounter something in the input which means we cannot
continue the block. This could be caused by:
- A non-predicable instruction
- An instruction with a condition not compatible with the IT block
- The IT block already contains 4 instructions
- A branch-like instruction (including ALU instructions with the PC as
the destination), which cannot appear in the middle of an IT block
- A label (branching into an IT block is not legal)
- A change of section, architecture, ISA, etc
- The end of the assembly file.
Some of these, such as change of section and end of file, are parsed
outside of the ARM asm parser, so I've added a new virtual function to
AsmParser to ensure any previously-parsed instructions have been
emitted. The ARM implementation of this flushes the currently pending IT
block.
We now have to try instruction matching up to 3 times, because we cannot
know if the current IT block is valid before matching, and instruction
matching changes depending on the IT block state (due to the 16-bit ALU
instructions, which set the flags iff not in an IT block). In the common
case of not having an open implicit IT block and the instruction being
matched not needing one, we still only have to run the matcher once.
I've removed the ITState.FirstCond variable, because it does not store
any information that isn't already represented by CurPosition. I've also
updated the comment on CurPosition to accurately describe it's meaning
(which this patch doesn't change).
Differential Revision: https://reviews.llvm.org/D22760
llvm-svn: 276747
Fixed typo in the intrinsic definitions of (v)cvtsd2ss with memory folding.
This was only unearthed when rL276102 started using the intrinsic again.....
llvm-svn: 276740
MIPS64R6 compact branch support. As the MIPS LLVM backend uses distinct
MachineInstrs for certain 32 and 64 bit instructions (e.g. BEQ & BEQ64) that
map to the same instruction, extend compact branch support for the
corresponding 64bit branches.
Reviewers: dsanders
Differential Revision: https://reviews.llvm.org/D20164
llvm-svn: 276739
Add the instruction alias sgtu (register form only), two operand forms of
s[rl]l and sra, and missing single/two operand forms of dnegu/neg.
Reviewers: dsanders
Differential Revision: https://reviews.llvm.org/D22752
llvm-svn: 276736
If we move a last-use register read to a later position we may skip
intermediate segments. This may require us to not only extend the
segment before the NewIdx, but also extend the segment live-in to
OldIdx.
This switches LiveIntervalTest to use AMDGPU so we can test subregister
liveness.
llvm-svn: 276724
Recent changes to Xcode have changed the structure of Xcode toolchains. This patch makes the xcode-toolchain goop construct a new-format Xcode toolchain that is compatible with Xcode 7.
The new format has a compatibility version key, so when a new format comes out we can support multiple formats in parallel.
llvm-svn: 276718
Instead of DFS numbering basic blocks we now DFS number instructions that avoids
the costly operation of which instruction comes first in a basic block.
Patch mostly written by Daniel Berlin.
Differential Revision: https://reviews.llvm.org/D22777
llvm-svn: 276714
This patch adds an option to specify the maximum depth in a BB at which to
consider hoisting instructions. Hoisting instructions from a deeper level is
not profitable as it increases register pressure and compilation time.
Differential Revision: https://reviews.llvm.org/D22772
llvm-svn: 276713
OS X 10.11 has a feature named System Integrity Protection. The goal of the feature is to make system binaries immutable (even as root). One part of this is that protected binaries do not receive DYLD_* environment variables because the kernel scrubs them before process launch.
This causes problems for LTO bootstrap builds on Darwin that try to use the just-built libLTO with the host ar, ranlib, or libtool.
This patch addresses two problems.
(1) The tools themselves aren't protected binaries but the shim tools installed at / are, so we need to call xcrun -find to find libtool instead of using the one CMake finds.
(2) Some build tools (ninja and make) use /bin/sh to invoke their subprocesses. Since /bin/sh is a system binary, the kernel scrubs the DYLD envars from their environment. To work around this we need to set the environment variables as part of the archiver commands, so the envars are set by the shell process instead of on the shell process.
llvm-svn: 276710
The saturation instructions appeared in v6T2, with DSP extensions, but they
were being accepted / generated on any, with the new introduction of the
saturation detection in the back-end. This commit restricts the usage to
DSP-enable only cores.
Fixes PR28607.
llvm-svn: 276701
This adds LLVM's 3 main cast instructions (inttoptr, ptrtoint, bitcast) to the
IRTranslator. The first two are direct translations (with 2 MachineInstr types
each). Since LLT discards information, a bitcast might become trivial and we
emit a COPY in those cases instead.
llvm-svn: 276690
They're basically i64 for AArch64, but we'll leave them intact for stranger
targets. Also add some tests for the (very few) other cases we can handle right
now.
llvm-svn: 276689
I consulted with Lang Hames on this work, and the goal was to add a bit
of "where" in the archive the error occurred along with what the error was.
So this step changes ArchiveMemberHeader into a class with a pointer
to the archive header and the parent archive. Which allows the methods
in the ArchiveMemberHeader to determine which member the header is
for to include that information in the error message.
For this first step the "where" is just the offset to the member in the
archive. The next step will be a new method on ArchiveMemberHeader
to get the full name, if possible, to be use in the error message. Which
will now be possible as ArchiveMemberHeader contains a pointer to
the Archive with its string table and its size, etc. so the full name can
be determined from the header if it is valid.
Also this change adds the missing checks the archive header is actually
contained in the buffer and is not truncated, as well as if the terminating
characters are correct in the header.
And changes one error message in Archive::Child::getNext() where the
name or offset to member is now added.
llvm-svn: 276686
MSVC won't provide the body of this move constructor and assignment
operator, possibly because the copy constructor is banned. Just write
it manually.
llvm-svn: 276685
Pre-instrumentation inline (pre-inliner) greatly improves the IR
instrumentation code performance, among other benefits. One issue of the
pre-inliner is it can introduce CFG-mismatch for COMDAT functions. This
is due to the fact that the same COMDAT function may have different early
inline decisions across different modules -- that means different copies
of COMDAT functions will have different CFG checksum.
In this patch, we propose a partially renaming the COMDAT group and its
member function/variable so we have different profile counter for each
version. We will post-fix the COMDAT function and the group name with its
FunctionHash.
Differential Revision: http://reviews.llvm.org/D22600
llvm-svn: 276673
This prevents StringSwitch from being used with 'auto', which is
important because the inferred type is StringSwitch rather than the
result type. This is a problem because StringSwitch stores addresses
of temporary values rather than copying or moving the value into its
own storage.
This is a compromise that still allows wrapping StringSwitch in other
temporary structures, which (unlike StringSwitch) may be non-trivial
to set up and therefore want to at least be movable. (For an example,
see QueryParser.cpp in clang-tools-extra.)
Changing this uncovered the bug in PassBuilder, also in this patch.
Clang doesn't seem to have any occurrences of the issue.
Re-commit of r276652.
llvm-svn: 276671
There didn't appear to be a good reason to use iplist in this case, a regular
list of unique_ptr works just as well.
Change made in preparation to a new PM port (since iplist is not moveable).
llvm-svn: 276668
With in-tree builds we can get Output directories scattered among our
tests. Recursing into those to find tests doesn't make sense.
Thanks to nlewycky for noticing this!
llvm-svn: 276667
