This patch is a large number of small changes that should hopefully not
affect the generated machine code but are still important to get right
so that the machine verifier won't complain about them.
The llvm/test/CodeGen/AVR/pseudo/*.mir changes are also necessary
because without the liveins the used registers are considered undefined
by the machine verifier and it will complain about them.
Differential Revision: https://reviews.llvm.org/D97172
Some instructions (especially mov+pop instructions) were setting the
wrong operands. For example, the pop instruction had the register set as
a source operand while it is a destination operand (the value is loaded
into the register).
I have found these issues using the machine verifier and using manual
code inspection.
Differential Revision: https://reviews.llvm.org/D97159
The previous expansion used SBCI, which is incorrect because the NEGW
pseudo instruction accepts a DREGS operand (2xGPR8) and SBCI only allows
LD8 registers. One solution could be to correct the NEGW pseudo
instruction, but another solution is to use a different instruction
(sbc) that does accept a GPR8 register and therefore allows more freedom
to the register allocator.
The output now matches avr-gcc for the following code:
int foo(int n) {
return -n;
}
I've found this issue using the machine instruction verifier: it was
complaining about the wrong register class in NEGWRd.mir.
Differential Revision: https://reviews.llvm.org/D97131
These aliases are sometimes used in assembly code and make the code more
readable. They are supported by avr-gcc too.
Differential Revision: https://reviews.llvm.org/D96492
References to functions are in program memory and need a `pm()` fixup. This should fix trait objects for Rust on AVR.
Differential Revision: https://reviews.llvm.org/D87631
Patch by Alex Mikhalev.
As mentioned in TODO comment, casting double to float causes NaNs to change bits.
To avoid the change, this patch adds support for single-floating-point immediate value on MachineCode.
Patch by Yuta Saito.
Differential Revision: https://reviews.llvm.org/D77384
It was discussed a few years ago and agreed that it makes sense to
remove this assertion as other targets do not perform similar register
size checking in inline assembly constraint logic, so the check just
adds a needless barrier on AVR.
This patch removes the assertion and removes 'XFAIL' from two Generic
CodeGen tests for AVR as a result.
This patch factors out the part of printInstruction that gets the
mnemonic string for a given MCInst. This is intended to be used
subsequently for the instruction-mix remarks to display the final
mnemonic (D90040).
Unfortunately making `getMnemonic` available to the AsmPrinter
seems to require making it virtual. Not sure if there's a way around
that with the current layering of the AsmPrinters.
Reviewed By: Paul-C-Anagnostopoulos
Differential Revision: https://reviews.llvm.org/D90039
No longer rely on an external tool to build the llvm component layout.
Instead, leverage the existing `add_llvm_componentlibrary` cmake function and
introduce `add_llvm_component_group` to accurately describe component behavior.
These function store extra properties in the created targets. These properties
are processed once all components are defined to resolve library dependencies
and produce the header expected by llvm-config.
Differential Revision: https://reviews.llvm.org/D90848
These expansions were rather inefficient and were done with more code
than necessary. This change optimizes them to use expansions more
similar to GCC. The code size is the same (when optimizing for code
size) but somehow LLVM reorders blocks in a non-optimal way. Still, this
should be an improvement with a reduction in code size of around 0.12%
(when building compiler-rt).
Differential Revision: https://reviews.llvm.org/D86418
We were checking if the ConstantSDNode was null but then immediately dereferencing it afterward - fold these both into a single check. Use the APInt::ult() helper as well.
Found by clang static analyzer.
This patch fixes a corruption of the stack pointer and several registers in any AVR interrupt with non-empty stack frame. Previously, the callee-saved registers were popped before restoring the stack pointer, causing the pointer math to use the wrong base value while also corrupting the caller's register. This change fixes the code to restore the stack pointer last before exiting the interrupt service routine.
https://bugs.llvm.org/show_bug.cgi?id=47253
Reviewed By: dylanmckay
Differential Revision: https://reviews.llvm.org/D87735
Patch by Andrew Dona-Couch.
The versions that take 'unsigned' will be removed in the future.
I tried to use getOriginalAlign instead of getAlign in some
places. getAlign factors in the minimum alignment implied by
the offset in the pointer info. Since we're also passing the
pointer info we can use the original alignment.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D87592
This patch implements initial backend support for a -mtune CPU controlled by a "tune-cpu" function attribute. If the attribute is not present X86 will use the resolved CPU from target-cpu attribute or command line.
This patch adds MC layer support a tune CPU. Each CPU now has two sets of features stored in their GenSubtargetInfo.inc tables . These features lists are passed separately to the Processor and ProcessorModel classes in tablegen. The tune list defaults to an empty list to avoid changes to non-X86. This annoyingly increases the size of static tables on all target as we now store 24 more bytes per CPU. I haven't quantified the overall impact, but I can if we're concerned.
One new test is added to X86 to show a few tuning features with mismatched tune-cpu and target-cpu/target-feature attributes to demonstrate independent control. Another new test is added to demonstrate that the scheduler model follows the tune CPU.
I have not added a -mtune to llc/opt or MC layer command line yet. With no attributes we'll just use the -mcpu for both. MC layer tools will always follow the normal CPU for tuning.
Differential Revision: https://reviews.llvm.org/D85165
This fixes warnings raised by Clang's new -Wsuggest-override, in preparation for enabling that warning in the LLVM build. This patch also removes the virtual keyword where redundant, but only in places where doing so improves consistency within a given file. It also removes a couple unnecessary virtual destructor declarations in derived classes where the destructor inherited from the base class is already virtual.
Differential Revision: https://reviews.llvm.org/D83709
Summary:
The previous version relied on the standard calling convention using
std::reverse() to try to force the AVR ABI. But this only works for
simple cases, it fails for example with aggregate types.
This patch rewrites the calling convention with custom C++ code, that
implements the ABI defined in https://gcc.gnu.org/wiki/avr-gcc.
To do that it adds a few 16-bit pseudo registers for unaligned argument
passing, such as R24R23. For example this function:
define void @fun({ i8, i16 } %a)
will pass %a.0 in R22 and %a.1 in R24R23.
There are no instructions that can use these pseudo registers, so a new
register class, DREGSMOVW, is defined to make them apart.
Also the ArgCC_AVR_BUILTIN_DIV is no longer necessary, as it is
identical to the C++ behavior (actually the clobber list is more strict
for __div* functions, but that is currently unimplemented).
Reviewers: dylanmckay
Subscribers: Gaelan, Sh4rK, indirect, jwagen, efriedma, dsprenkels, hiraditya, Jim, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68524
Patch by Rodrigo Rivas Costa.
Add disassembly support for the movw, adiw, and sbiw instructions.
I had previously committed test cases for the adiw and sbiw
instructions, but had accidentally made them not runnable so they were
skipped all this time. Oops. This patch fixes that by adding support for
disassembling those instructions.
Differential Revision: https://reviews.llvm.org/D82093
Some instructions have a fixed Z register and don't have an explicit
register operand. This can be worked around by simply printing the
operand directly if the particular register class is detected.
The LPM and ELPM instructions also needed a custom decoder, which is
also included in this patch.
Differential Revision: https://reviews.llvm.org/D82088
These can often only use a limited range of registers, and apparently
need special decoding support.
Differential Revision: https://reviews.llvm.org/D81971
This is a set of instructions that take just a single register as an
operand, with no immediates. Because all instructions share the same
format, I haven't added exhaustive bit testing to all instructions but
just to the inc instruction.
Differential Revision: https://reviews.llvm.org/D81968
I'm not entirely sure why this was ever needed, but when I remove both
adjustments all tests still pass.
This fixes a bug where a long branch (using the `jmp` instead of the
`rjmp` instruction) was incorrectly adjusted by 2 because it jumps to an
absolute address instead of a PC-relative address. I could have added
AVR::fixup_call to the list of exceptions, but it seemed more sensible
to me to just remove this code.
Differential Revision: https://reviews.llvm.org/D78459
Code like the following:
define i32 @foo(i32 %a, i1 zeroext %b) addrspace(1) {
entry:
%conv = zext i1 %b to i32
%add = add nsw i32 %conv, %a
ret i32 %add
}
Would compile to the following (incorrect) code:
foo:
mov r18, r20
clr r19
add r22, r18
adc r23, r19
sbci r24, 0
sbci r25, 0
ret
Those sbci instructions are clearly wrong, they should have been adc
instructions.
This commit improves codegen to use adc instead:
foo:
mov r18, r20
clr r19
ldi r20, 0
ldi r21, 0
add r22, r18
adc r23, r19
adc r24, r20
adc r25, r21
ret
This code is not optimal (it could be just 5 instructions instead of the
current 9) but at least it doesn't miscompile.
Differential Revision: https://reviews.llvm.org/D78439
This needed two fixes:
* 32-bit instructions were read in the wrong order. The machine code
swaps the two 16-bit instruction words, which wasn't undone when
decoding instructions.
* Jump and call instructions don't encode the lowest address bit,
which is always zero. Therefore, the address needed to be shifted by
one to fix that.
Differential Revision: https://reviews.llvm.org/D81961
An instruction like this will need to allocate some stack space for the
last parameter:
%x = call addrspace(1) i16 @bar(i64 undef, i64 undef, i16 undef, i16 0)
This worked fine when passing an actual value (in this case 0). However,
when passing undef, no value was pushed to the stack and therefore no
push instructions were created. This caused an unbalanced stack leading
to interesting results.
This commit fixes that by replacing the push logic with a regular stack
adjustment and stack-relative load/stores. This is less efficient but at
least it correctly compiles the code.
I can think of a few improvements in the future:
* The stack should have been adjusted in the function prologue when
there are no allocas in the function.
* Many (if not most) stack adjustments can be replaced by
pushing/popping the values directly. Exactly like the previous code
attempted but didn't do correctly.
* Small stack adjustments can be done more efficiently with a few
push/pop instructions (pushing/popping bogus values), both for code
size and for speed.
All in all, as long as there are no allocas in the function I think that
it is almost always more efficient to emit regular push/pop
instructions. This is however left for future optimizations.
Differential Revision: https://reviews.llvm.org/D78581
This patch fixes a bug in stack save/restore code. Because the frame
pointer was saved/restored manually (not by marking it as clobbered) the
StackSize variable was not updated accordingly. Most code still worked,
but code that tried to load a parameter passed on the stack did not.
This commit fixes this by marking the frame pointer as a
callee-clobbered register. This will let it be saved without any effort
in prolog/epilog code and will make sure the correct address is
calculated for loading parameters that are passed on the stack.
This approach is used by most other targets (such as X86, AArch64 and
RISC-V).
Differential Revision: https://reviews.llvm.org/D78579
The in, out, and sbi/cbi family of instructions seem to require a custom
decoder. I'm not exactly sure why and would prefer to convince TableGen
to provide the correct decoders for these, but I can't seem to convince
it to do so. They simply disassemble without any operands.
Differential Revision: https://reviews.llvm.org/D74049
D77207 changed the bounds checks resulting in tests for positive unsigned values - dropping the superfluous check to fix gcc+Werror "error: comparison of unsigned expression >= 0 is always true [-Werror=type-limits]" warning.
Summary:
On XMEGA, I/O address space is same as data address space - there is no 0x20 offset,
because CPU General Purpose Registers are not mapped in data address space.
From https://en.wikipedia.org/wiki/AVR_microcontrollers
> In the XMEGA variant, the working register file is not mapped into the data address space; as such, it is not possible to treat any of the XMEGA's working registers as though they were SRAM. Instead, the I/O registers are mapped into the data address space starting at the very beginning of the address space.
Reviewers: dylanmckay
Reviewed By: dylanmckay
Subscribers: hiraditya, Jim, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77207
Patch by Vlastimil Labsky.
Summary:
Before this patch, `relaxInstruction` takes three arguments, the first
argument refers to the instruction before relaxation and the third
argument is the output instruction after relaxation. There are two quite
strange things:
1) The first argument's type is `const MCInst &`, the third
argument's type is `MCInst &`, but they may be aliased to the same
variable
2) The backends of ARM, AMDGPU, RISC-V, Hexagon assume that the third
argument is a fresh uninitialized `MCInst` even if `relaxInstruction`
may be called like `relaxInstruction(Relaxed, STI, Relaxed)` in a
loop.
In this patch, we drop the thrid argument, and let `relaxInstruction`
directly modify the given instruction. Also, this patch fixes the bug https://bugs.llvm.org/show_bug.cgi?id=45580, which is introduced by D77851, and
breaks the assumption of ARM, AMDGPU, RISC-V, Hexagon.
Reviewers: Razer6, MaskRay, jyknight, asb, luismarques, enderby, rtaylor, colinl, bcain
Reviewed By: Razer6, MaskRay, bcain
Subscribers: bcain, nickdesaulniers, nathanchance, wuzish, annita.zhang, arsenm, dschuff, jyknight, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, tpr, sbc100, jgravelle-google, kristof.beyls, hiraditya, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, Jim, lenary, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78364
Previously, the AVR backend would put functions in .progmem.data. This
is probably a regression from when functions still lived in address
space 0. With this change, only global constants are placed in
.progmem.data.
This is not complete: avr-gcc additionally respects -fdata-sections for
progmem global constants, which LLVM doesn't yet do. But fixing that is
a bit more complicated (and I believe other backends such as RISC-V
might also have similar issues).
Differential Revision: https://reviews.llvm.org/D78212
