* Introduce the new intrinsic amdgcn_strict_wwm
* Deprecate the old intrinsic amdgcn_wwm
The change is done for consistency as the "strict"
prefix will become an important, distinguishing factor
between amdgcn_wqm and amdgcn_strictwqm in the future.
The "strict" prefix indicates that inactive lanes do not
take part in control flow, specifically an inactive lane
enabled by a strict mode will always be enabled irrespective
of control flow decisions.
The amdgcn_wwm will be removed, but doing so in two steps
gives users time to switch to the new name at their own pace.
Reviewed By: critson
Differential Revision: https://reviews.llvm.org/D96257
Previously, instructions which could be
expressed as VOP3 in addition to another
encoding had a _e64 suffix on the tablegen
record name, while those
only available as VOP3 did not. With this
patch, all VOP3s will have the _e64 suffix.
The assembly does not change, only the mir.
Reviewed By: foad
Differential Revision: https://reviews.llvm.org/D94341
Change-Id: Ia8ec8890d47f8f94bbbdac43745b4e9dd2b03423
Remove the InsertionPoint argument from SlotIndexes::insertMBBInMaps
because it was confusing: what does it mean to insert a new block
between two instructions, in the middle of an existing block?
Instead, support the case that MachineBasicBlock::splitAt really needs,
where the new block contains some instructions that are already in the
maps because they have been moved there from the tail of the previous
block.
In all other use cases the new block is empty.
Based on work by Carl Ritson!
Differential Revision: https://reviews.llvm.org/D94311
handleMoveDown or handleMoveUp cannot properly repair a main
range of a LiveInterval since they only get LiveRange. There
is a problem if certain use has moved few segments away and
there is a hole in the main range in between of these two
locations. We may get a SubRange with a very extended Segment
spanning several Segments of the main range and also spanning
that hole. If that happens then we end up with the main range
not covering its SubRange which is an error.
It might be possible to attempt fixing the main range in place
just between of the old and new index by extending all of its
Segments in between, but it is unclear this logic will be
faster than just straight constructMainRangeFromSubranges,
which itself is pretty cheap since it only contains interval
logic. That will also require shrinkToUses() call after which
is probably even more expensive.
In the test second move is from 64B to 92B for the sub1.
Subrange is correctly fixed:
L000000000000000C [16r,32B:0)[32B,92r:1) 0@16r 1@32B-phi
But the main range has a hole in between 80d and 88r after
updateRange():
%1 [16r,32B:0)[32B,80r:4)[80r,80d:3)[88r,96r:1)[96r,160B:2)
Since source position is 64B this segment is not even considered
by the updateRange().
Differential Revision: https://reviews.llvm.org/D82916
Without this fix, handleMoveUp can create an invalid live range like
this:
[98904e,98908r:0)[98908e,227504r:1)
where the two segments overlap, but only because we have lost the "e"
(early-clobber) on the end point of the first segment.
Differential Revision: https://reviews.llvm.org/D82110
This is the groundwork required to implement strictfp. For now, this
should be NFC for regular instructoins (many instructions just gain an
extra use of a reserved register). Regalloc won't rematerialize
instructions with reads of physical registers, but we were suffering
from that anyway with the exec reads.
Should add it for all the related FP uses (possibly with some
extras). I did not add it to either the gpr index mode instructions
(or every single VALU instruction) since it's a ridiculous feature
already modeled as an arbitrary side effect.
Also work towards marking instructions with FP exceptions. This
doesn't actually set the bit yet since this would start to change
codegen. It seems nofpexcept is currently not implied from the regular
IR FP operations. Add it to some MIR tests where I think it might
matter.
This was printing about r600 not being a valid subtarget for an amdgcn
triple. This is an awkward place because r600 and amdgcn unfortunately
occupy the same target. Silence the warning by specifying an explicit
subtarget.
Summary:
The current handleMoveIntoBundle implementation is unusable,
it attempts to access the slot indexes of bundled instructions.
It also leaves bundled instructions with slot indexes assigned.
Replace handleMoveIntoBundle this with a more explicit
handleMoveIntoNewBundle function which recalculates the live
intervals for all instructions moved into a newly formed bundle,
and removes slot indexes from these instructions.
Reviewers: arsenm, MaskRay, kariddi, tpr, qcolombet
Reviewed By: qcolombet
Subscribers: MatzeB, wdng, hiraditya, arphaman, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77969
Summary:
After D70211, Pass.h does not include InitializePasses.h anymore, so
these files need to include InitializePasses.h directly.
Reviewers: rnk
Subscribers: MatzeB, mehdi_amini, zzheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70217
If a subregister def was moved across another subregister def and
another use, the main range was not correctly updated. The end point
of the moved interval ended too early and missed the use from theh
other lanes in the subreg def.
llvm-svn: 375300
Existing clients are converted to use MachineModuleInfoWrapperPass. The
new interface is for defining a new pass manager API in CodeGen.
Reviewers: fedor.sergeev, philip.pfaffe, chandlerc, arsenm
Reviewed By: arsenm, fedor.sergeev
Differential Revision: https://reviews.llvm.org/D64183
llvm-svn: 373240
MachineModuleInfo can only be used in code using lib/CodeGen, hence we
can keep a more specific reference to LLVMTargetMachine rather than just
TargetMachine around.
llvm-svn: 346182
Summary:
In the test case, the machine scheduler moves a dead write to a subreg
up into the middle of a segment of the overall reg's live range, where
the segment had liveness only for other subregs in the reg.
handleMoveUp created an invalid live range, causing an assert a bit
later.
This commit fixes it to handle that situation. The segment is split in
two at the insertion point, and the part after the split, and any
subsequent segments up to the old position, are changed to be defined by
the moved def.
V2: Better test.
Subscribers: MatzeB, nhaehnle, llvm-commits
Differential Revision: https://reviews.llvm.org/D43478
Change-Id: Ibc42445ddca84e79ad1f616401015d22bc63832e
llvm-svn: 326087
Discussed here:
http://lists.llvm.org/pipermail/llvm-dev/2018-January/120320.html
In preparation for adding support for named vregs we are changing the sigil for
physical registers in MIR to '$' from '%'. This will prevent name clashes of
named physical register with named vregs.
llvm-svn: 323922
Headers/Implementation files should be named after the class they
declare/define.
Also eliminated an `#include "llvm/CodeGen/LiveIntervalAnalysis.h"` in
favor of `class LiveIntarvals;`
llvm-svn: 320546
All these headers already depend on CodeGen headers so moving them into
CodeGen fixes the layering (since CodeGen depends on Target, not the
other way around).
llvm-svn: 318490
IMHO it is an antipattern to have a enum value that is Default.
At any given piece of code it is not clear if we have to handle
Default or if has already been mapped to a concrete value. In this
case in particular, only the target can do the mapping and it is nice
to make sure it is always done.
This deletes the two default enum values of CodeModel and uses an
explicit Optional<CodeModel> when it is possible that it is
unspecified.
llvm-svn: 309911
Use `if (!X) report_fatal_error()` instead of `assert()` for the ad-hoc
error handling in two unittests. This reduces unnecessary differences
between release and debug builds (motivated by unused variable warnings
triggered in release builds).
llvm-svn: 304814
clang-format (https://reviews.llvm.org/D33932) to keep primary headers
at the top and handle new utility headers like 'gmock' consistently with
other utility headers.
No other change was made. I did no manual edits, all of this is
clang-format.
This should allow other changes to have more clear and focused diffs,
and is especially motivated by moving some headers into more focused
libraries.
llvm-svn: 304786
When parsing .mir files immediately construct the MachineFunctions and
put them into MachineModuleInfo.
This allows us to get rid of the delayed construction (and delayed error
reporting) through the MachineFunctionInitialzier interface.
Differential Revision: https://reviews.llvm.org/D33809
llvm-svn: 304758
The problem can occur in presence of subregs. If we are swapping two
instructions defining different subregs of the same register we will
get a new liveout from a block. We need to preserve value number for
block's liveout for successor block's livein to match.
Differential Revision: https://reviews.llvm.org/D30558
llvm-svn: 297534
Re-apply this patch, hopefully I will get away without any warnings
in the constructor now.
This patch removes the MachineFunctionAnalysis. Instead we keep a
map from IR Function to MachineFunction in the MachineModuleInfo.
This allows the insertion of ModulePasses into the codegen pipeline
without breaking it because the MachineFunctionAnalysis gets dropped
before a module pass.
Peak memory should stay unchanged without a ModulePass in the codegen
pipeline: Previously the MachineFunction was freed at the end of a codegen
function pipeline because the MachineFunctionAnalysis was dropped; With
this patch the MachineFunction is freed after the AsmPrinter has
finished.
Differential Revision: http://reviews.llvm.org/D23736
llvm-svn: 279602
Change this pass constructor to just accept a const TargetMachine * and
use INITIALIZE_TM_PASS, that way we can get rid of the dummy
constructor. The pass will still fail when calling the default
constructor leading to TM == nullptr, this is no different than before
but is more in line what other codegen passes are doing and avoids the
dummy constructor.
llvm-svn: 279598
Re-apply this commit with the deletion of a MachineFunction delegated to
a separate pass to avoid use after free when doing this directly in
AsmPrinter.
This patch removes the MachineFunctionAnalysis. Instead we keep a
map from IR Function to MachineFunction in the MachineModuleInfo.
This allows the insertion of ModulePasses into the codegen pipeline
without breaking it because the MachineFunctionAnalysis gets dropped
before a module pass.
Peak memory should stay unchanged without a ModulePass in the codegen
pipeline: Previously the MachineFunction was freed at the end of a codegen
function pipeline because the MachineFunctionAnalysis was dropped; With
this patch the MachineFunction is freed after the AsmPrinter has
finished.
Differential Revision: http://reviews.llvm.org/D23736
llvm-svn: 279564
This patch removes the MachineFunctionAnalysis. Instead we keep a
map from IR Function to MachineFunction in the MachineModuleInfo.
This allows the insertion of ModulePasses into the codegen pipeline
without breaking it because the MachineFunctionAnalysis gets dropped
before a module pass.
Peak memory should stay unchanged without a ModulePass in the codegen
pipeline: Previously the MachineFunction was freed at the end of a codegen
function pipeline because the MachineFunctionAnalysis was dropped; With
this patch the MachineFunction is freed after the AsmPrinter has
finished.
Differential Revision: http://reviews.llvm.org/D23736
llvm-svn: 279502
Change the syntax to use `%0.sub8` to denote a subregister.
This seems like a more natural fit to denote subregisters; I also plan
to introduce a new ":classname" syntax in upcoming patches to denote the
register class of a vreg.
Note that this commit disallows plain identifiers to start with a '.'
character. This shouldn't affect anything as external names/IR
references are all prefixed with '$'/'%', plain identifiers are only
used for instruction names, register mask names and subreg indexes.
Differential Revision: https://reviews.llvm.org/D22390
llvm-svn: 276815
If we move a last-use register read to a later position we may skip
intermediate segments. This may require us to not only extend the
segment before the NewIdx, but also extend the segment live-in to
OldIdx.
This switches LiveIntervalTest to use AMDGPU so we can test subregister
liveness.
llvm-svn: 276724
undef uses are no real uses of a register and must be ignored by
findLastUseBefore() so that handleMove() does not produce invalid live
intervals in some cases.
This fixed http://llvm.org/PR28083
llvm-svn: 272446
Having an enum member named Default is quite confusing: Is it distinct
from the others?
This patch removes that member and instead uses Optional<Reloc> in
places where we have a user input that still hasn't been maped to the
default value, which is now clear has no be one of the remaining 3
options.
llvm-svn: 269988
Add convenience function to create MachineModuleInfo and
MachineFunctionAnalysis passes and add them to a pass manager.
Despite factoring out some shared code in
LiveIntervalTest/LLVMTargetMachine this will be used by my upcoming llc
change.
llvm-svn: 269002
The commit breaks stage2 compilation on PowerPC. Reverting for now while
this is analyzed. I also have to revert the LiveIntervalTest for now as
that depends on this commit.
Revert "LiveIntervalAnalysis: Remove LiveVariables requirement"
This reverts commit r260806.
Revert "Remove an unnecessary std::move to fix -Wpessimizing-move warning."
This reverts commit r260931.
Revert "Fix typo in LiveIntervalTest"
This reverts commit r260907.
Revert "Add unittest for LiveIntervalAnalysis::handleMove()"
This reverts commit r260905.
llvm-svn: 261189
