Narrow Scalar G_MUL for MIPS32.
Revisit NarrowScalar implementation in LegalizerHelper.
Introduce new helper function multiplyRegisters.
It performs generic multiplication of values held in multiple registers.
Generated instructions use only types NarrowTy and i1.
Destination can be same or two times size of the source.
Differential Revision: https://reviews.llvm.org/D58824
llvm-svn: 355814
Summary:
Binary formats often include various enumerations or bitsets, but using
endian-specific types for accessing them is tricky because they
currently only support integral types. This is particularly true for
scoped enums (enum class), as these are not implicitly convertible to
integral types, and so one has to perform two casts just to read the
enum value.
This fixes that support by adding first-class support for enumeration
types to endian-specific types. The support for them was already almost
working -- all I needed to do was overload getSwappedBytes for
enumeration types (which casts the enum to its underlying type and performs the
conversion there). I also add some convenience template aliases to simplify
declaring endian-specific enums.
Reviewers: Bigcheese, zturner
Subscribers: kristina, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59141
llvm-svn: 355812
Instead I plan to have dedicated nodes for FROUND_CURRENT and FROUND_NO_EXC.
This patch starts with FADDS/FSUBS/FMULS/FDIVS/FMAXS/FMINS/FSQRTS.
llvm-svn: 355799
After fix all asserts found by machine verifier in PowerPC target with following patches,
we can activate machine verifier as default.
rL293769, rL348566, rL349030, rL349029, rL350113, rL350111,
rL350799, rL350165, rL355378, rL352174, rL354762, rL350115
It's also found in PR#27456, https://bugs.llvm.org/show_bug.cgi?id=27456
Differential Revision: https://reviews.llvm.org/D59011
llvm-svn: 355798
We had patterns using X86ISD::SCALAR_SINT_TO_FP_RND/SCALAR_UINT_TO_FP_RND for
these instructions. There's nothing to round. Instead, we use a regular
sint_to_fp/uint_to_fp and a movsd as the pattern for these.
llvm-svn: 355796
Many of our tests were not using valid rounding mode immediates. Clang verifies this in the frontend when it creates the intrinsics from builtins, but the backend would still lower invalid immediates.
With this change we will now leave them as intrinsics if the immediate is invalid. This will cause an isel selection failure.
llvm-svn: 355789
Includes a fix to emit a CheckOpcode for build_vector when immAllZerosV/immAllOnesV is used as a pattern root. This means it can't be used to look through bitcasts when used as a root, but that's probably ok. This extra CheckOpcode will ensure that the first match in the isel table will be a SwitchOpcode which is needed by the caching optimization in the ISel Matcher.
Original commit message:
Previously we had build_vector PatFrags that called ISD::isBuildVectorAllZeros/Ones. Internally the ISD::isBuildVectorAllZeros/Ones look through bitcasts, but we aren't able to take advantage of that in isel. Instead of we have to canonicalize the types of the all zeros/ones build_vectors and insert bitcasts. Then we have to pattern match those exact bitcasts.
By emitting specific matchers for these 2 nodes, we can make isel look through any bitcasts without needing to explicitly match them. We should also be able to remove the canonicalization to vXi32 from lowering, but I've left that for a follow up.
This removes something like 40,000 bytes from the X86 isel table.
Differential Revision: https://reviews.llvm.org/D58595
llvm-svn: 355784
The --force-interactive option was introduced in SVN 1.8, and trying to
pass it to older SVN clients causes an error; CentOS 7 includes SVN 1.7,
for example, so this makes `git llvm` not usable out of the box. Older
clients would be interactive by default anyway [1], so just don't pass
the option if it's not supported.
An alternative would be to check the version instead of checking the
help text, but I think directly detecting the presence of the option is
more direct.
[1] http://svn.apache.org/viewvc?view=revision&revision=1424037
Differential Revision: https://reviews.llvm.org/D59161
llvm-svn: 355782
InstructionSimplify currently has some code to determine the constant
range of integer instructions for some simple cases. It is used to
simplify icmps.
This change moves the relevant code into ValueTracking as
llvm::computeConstantRange(), so it can also be reused for other
purposes.
In particular this is with the optimization of overflow checks in
mind (ref D59071), where constant ranges cover some cases that
known bits don't.
llvm-svn: 355781
Currently the store+load is folded and both operands of the umulo
end up being constants. To avoid this getting folded away entirely,
make sure at least one operand is non-constant.
Also remove some allocas which don't seem relevant to the test.
llvm-svn: 355776
This patch adds proper handling of -target-abi, as accepted by llvm-mc and
llc. Lowering (codegen) for the hard-float ABIs will follow in a subsequent
patch. However, this patch does add MC layer support for the hard float and
RVE ABIs (emission of the appropriate ELF flags
https://github.com/riscv/riscv-elf-psabi-doc/blob/master/riscv-elf.md#-file-header).
ABI parsing must be shared between codegen and the MC layer, so we add
computeTargetABI to RISCVUtils. A warning will be printed if an invalid or
unrecognized ABI is given.
Differential Revision: https://reviews.llvm.org/D59023
llvm-svn: 355771
Summary:
Uses the named operands tablegen feature to look up the indices of
offset, address, and p2align operands for all load and store
instructions. This replaces brittle, incorrect logic for identifying
loads and store when eliminating frame indices, which previously
crashed on bulk-memory ops. It also cleans up the SetP2Alignment pass.
Reviewers: aheejin, dschuff
Subscribers: sbc100, jgravelle-google, hiraditya, sunfish, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59007
llvm-svn: 355770
This saves needing to call getInt32 ourselves. Making the code a little shorter.
The test changes are because insert/extract use getInt64 internally. Shouldn't be a functional issue.
This cleanup because I plan to write similar code for expandload/compressstore.
llvm-svn: 355767
When installing runtimes with install-runtimes-stripped, we don't want
to just strip them, we also want to preserve the debugging information
for potential debugging. To make it possible to later find the stripped
debugging information, we want to use the .build-id layout:
https://fedoraproject.org/wiki/RolandMcGrath/BuildID#Find_files_by_build_ID
That is, for libfoo.so with build ID abcdef1234, the debugging information
will be installed into lib/debug/.build-id/ab/cdef1234. llvm-objcopy
already has support for stripping files and linking the debugging
stripped output into the right location. However, CMake doesn't support
customizing strip invocation for the *-stripped targets. So instead, we
replace CMAKE_STRIP with a custom script that invokes llvm-objcopy with
the right command line flags.
Differential Revision: https://reviews.llvm.org/D59127
llvm-svn: 355765
There are special cases in the scalarization for constant masks. If we hit one of the special cases we don't need to reset the iteration.
Noticed while starting work on adding expandload/compressstore to this pass.
llvm-svn: 355754
Summary:
Floating-point CSRs should be accessible even when F extension is not enabled.
But pseudo instructions that access floating point CSRs still require the F extension.
GNU tools already implement this behavior. RISC-V spec is pending update to reflect
this behavior and to extend it to pseudo instructions that access floating point CSRs.
Reviewers: asb
Reviewed By: asb
Subscribers: asb, rbar, johnrusso, simoncook, sabuasal, niosHD, kito-cheng, shiva0217, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, PkmX, jocewei, llvm-commits
Differential Revision: https://reviews.llvm.org/D58932
llvm-svn: 355753
r44412 fixed a huge compile time regression but it needed ModifiedDT flag to be
maintained correctly in optimizations in optimizeBlock() and optimizeInst().
Function optimizeSelectInst() does not update the flag.
This patch propagates the flag in optimizeSelectInst() back to
optimizeBlock().
This patch also removes ModifiedDT in CodeGenPrepare class (which is not used).
The property of ModifiedDT is now recorded in a ref parameter.
Differential Revision: https://reviews.llvm.org/D59139
llvm-svn: 355751
Specifically, compute and Print Type and Section columns.
This is a re-commit of rL354833, after fixing the Asan problem found a a buildbot.
Differential Revision: https://reviews.llvm.org/D59060
llvm-svn: 355742
An extension of D58282 noted in PR39665:
https://bugs.llvm.org/show_bug.cgi?id=39665
This doesn't answer the request to use movmsk, but that's an
independent problem. We need this and probably still need
scalarization of FP selects because we can't do that as a
target-independent transform (although it seems likely that
targets besides x86 should have this transform).
llvm-svn: 355741