Two of the tests are new test cases (cross-module-a.ll, multi-module-a.ll)
not yet supported on MIPS, while XFAIL for the other two tests was
accidentally removed in r193570 and this change reverts those lines.
llvm-svn: 193781
- Mark tests as XFAIL:cygming in test/ExecutionEngine/MCJIT/remote.
Rather to suppress them, I'd like to leave them running as XFAIL.
- Revert r193472. RecordMemoryManager no longer resolves __main on cygming.
There are a couple of issues.
- X86 Codegen emits "call __main" in @main for targeting cygming.
It is useless in JIT. FYI, tests are passing when emitting __main is disabled.
- Current remote JIT does not resolve any symbols in child context.
FIXME: __main should be disabled, or remote JIT should resolve __main.
llvm-svn: 193498
This fixes a problem from a previous check-in where a return value was omitted.
Previously the remote/stubs-remote.ll and remote/stubs-sm-pic.ll tests were reporting passes, but they should have been failing. Those tests attempt to link against an external symbol and remote symbol resolution is not supported. The old RemoteMemoryManager implementation resulted in local symbols being used for resolution and the child process crashed but the test didn't notice. With this check-in remote symbol resolution fails, and so the test (correctly) fails.
llvm-svn: 192514
At this time only Unix-based systems are supported. Windows has stubs and should re-route to the simulated mode.
Thanks to Sriram Murali for contributions to this patch.
llvm-svn: 191843
This patch implements vector support for select instruction and adds specific vector instructions : shuffle and insertelement. (tests are also included)
and functions lle_X_memset, lle_X_memcpy added.
Done by Veselov, Yuri (mailto:Yuri.Veselov@intel.com)
llvm-svn: 189735
- Instead of setting the suffixes in a bunch of places, just set one master
list in the top-level config. We now only modify the suffix list in a few
suites that have one particular unique suffix (.ml, .mc, .yaml, .td, .py).
- Aside from removing the need for a bunch of lit.local.cfg files, this enables
4 tests that were inadvertently being skipped (one in
Transforms/BranchFolding, a .s file each in DebugInfo/AArch64 and
CodeGen/PowerPC, and one in CodeGen/SI which is now failing and has been
XFAILED).
- This commit also fixes a bunch of config files to use config.root instead of
older copy-pasted code.
llvm-svn: 188513
fix for: Bug 16694 - ExecutionEngine/test-interp-vec-loadstore.ll failing on powerpc-darwin8 (http://llvm.org/bugs/show_bug.cgi?id=16694)
The ExecutionEngine/test-interp-vec-loadstore.ll test has been failing on powerpc-darwin8 (on other platforms it passed)
the reason of fail was wrong output by printf. this output is checked by FileCheck, but on little-endian powerpc the output numeric data were printed inside out and FileCheck reported fail.
the printfs have been replaced by checking data inside test and numeric output has been replaced by the text output like : "int test passed, float test passed". The text output is checked by FileCheck.
the dependency on data layout has been removed.
done by Yuri Veselov (Intel)
llvm-svn: 187791
The MOV64ri64i32 instruction required hacky MCInst lowering because it
was allocated as setting a GR64, but the eventual instruction ("movl")
only set a GR32. This converts it into a so-called "MOV32ri64" which
still accepts a (appropriate) 64-bit immediate but defines a GR32.
This is then converted to the full GR64 by a SUBREG_TO_REG operation,
thus keeping everyone happy.
This fixes a typo in the opcode field of the original patch, which
should make the legact JIT work again (& adds test for that problem).
llvm-svn: 183068
Previously we would read-modify-write the target bits when processing
relocations for the MCJIT. This had the problem that when relocations
were processed multiple times for the same object file (as they can
be), the result is not idempotent and the values became corrupted.
The solution to this is to take any bits used in the destination from
the pristine object file as LLVM emitted it.
This should fix PR16013 and remote MCJIT on ARM ELF targets.
llvm-svn: 182800
lli's remote MCJIT code calls setExecutable just prior to running
code. In line with Darwin behaviour this seems to be the place to
invalidate any caches needed so that relocations can take effect
properly.
llvm-svn: 182213
This patch adds the necessary configuration bits and #ifdef's to set up
the JIT/MCJIT test cases for SystemZ. Like other recent targets, we do
fully support MCJIT, but do not support the old JIT at all. Set up the
lit config files accordingly, and disable old-JIT unit tests.
Patch by Richard Sandiford.
llvm-svn: 181207
This gets exception handling working on ELF and Macho (x86-64 at least).
Other than the EH frame registration, this patch also implements support
for GOT relocations which are used to locate the personality function on
MachO.
llvm-svn: 181167
For regular object files this is only meaningful for common symbols. An object
file format with direct support for atoms should be able to provide alignment
information for all symbols.
This replaces getCommonSymbolAlignment and fixes
test-common-symbols-alignment.ll on darwin. This also includes a fix to
MachOObjectFile::getSymbolFlags. It was marking undefined symbols as common
(already tested by existing mcjit tests now that it is used).
llvm-svn: 180736
llvm-mips-linux green.
llvm-mips-linux runs on a big endian machine. This test passes if I change 'e'
to 'E' in the target data layout string.
llvm-svn: 178910
When the RuntimeDyldELF::processRelocationRef routine finds the target
symbol of a relocation in the local or global symbol table, it performs
a section-relative relocation:
Value.SectionID = lsi->second.first;
Value.Addend = lsi->second.second;
At this point, however, any Addend that might have been specified in
the original relocation record is lost. This is somewhat difficult to
trigger for relocations within the code section since they usually
do not contain non-zero Addends (when built with the default JIT code
model, in any case). However, the problem can be reliably triggered
by a relocation within the data section caused by code like:
int test[2] = { -1, 0 };
int *p = &test[1];
The initializer of "p" will need a relocation to "test + 4". On
platforms using RelA relocations this means an Addend of 4 is required.
Current code ignores this addend when processing the relocation,
resulting in incorrect execution.
Fixed by taking the Addend into account when processing relocations
to symbols found in the local or global symbol table.
Tested on x86_64-linux and powerpc64-linux.
llvm-svn: 178869
Most of the tests that behave differently on llvm-arm-linux buildbot
did so becase the triple wasn't set correctly to armv5, so we can
revert most of the special behaviour added previously. Some tests
still need the special treatment, though.
llvm-svn: 176243
Profiling tests *do* need a JIT. They'll pass if a cross-compiler targetting
AArch64 by default has been built, but fail if a native AArch64 compiler has
been build. Therefore XFAIL is inappropriate and we mark them unsupported.
ExecutionEngine tests are JIT by definition, they should also be unsupported.
Transforms/LICM only uses the interpreter to check the output is still sane
after optimisation. It can be switched to use an interpreter.
llvm-svn: 175433
In r143502, we renamed getHostTriple() to getDefaultTargetTriple()
as part of work to allow the user to supply a different default
target triple at configure time. This change also affected the JIT.
However, it is inappropriate to use the default target triple in the
JIT in most circumstances because this will not necessarily match
the current architecture used by the process, leading to illegal
instruction and other such errors at run time.
Introduce the getProcessTriple() function for use in the JIT and
its clients, and cause the JIT to use it. On architectures with a
single bitness, the host and process triples are identical. On other
architectures, the host triple represents the architecture of the
host CPU, while the process triple represents the architecture used
by the host CPU to interpret machine code within the current process.
For example, when executing 32-bit code on a 64-bit Linux machine,
the host triple may be 'x86_64-unknown-linux-gnu', while the process
triple may be 'i386-unknown-linux-gnu'.
This fixes JIT for the 32-on-64-bit (and vice versa) build on non-Apple
platforms.
Differential Revision: http://llvm-reviews.chandlerc.com/D254
llvm-svn: 172627
This adds 'elf' as a recognized target triple environment value and overrides the default generated object format on Windows platforms if that value is present. This patch also enables MCJIT tests on Windows using the new environment value.
llvm-svn: 165030
- Added HOST_ARCH to Makefile.config.in
The HOST_ARCH will be used by MCJIT tests filter, because MCJIT supported only x86 and ARM architectures now.
llvm-svn: 157015
of zero-initialized sections, virtual sections and common symbols
and preventing the loading of sections which are not required for
execution such as debug information.
Patch by Andy Kaylor!
llvm-svn: 154610
(and hopefully on Windows). The bots have been down most of the day
because of this, and it's not clear to me what all will be required to
fix it.
The commits started with r153205, then r153207, r153208, and r153221.
The first commit seems to be the real culprit, but I couldn't revert
a smaller number of patches.
When resubmitting, r153207 and r153208 should be folded into r153205,
they were simple build fixes.
llvm-svn: 153241
implementation.
Currently lit still executes ExecutionEngine tests with JIT (not MCJIT) by
default. MCJIT tests can be executed manually by calling llvm-lit with
--param jit_impl=mcjit
llvm-svn: 148299
integer and floating-point opcodes, introducing
FAdd, FSub, and FMul.
For now, the AsmParser, BitcodeReader, and IRBuilder all preserve
backwards compatability, and the Core LLVM APIs preserve backwards
compatibility for IR producers. Most front-ends won't need to change
immediately.
This implements the first step of the plan outlined here:
http://nondot.org/sabre/LLVMNotes/IntegerOverflow.txt
llvm-svn: 72897
the LowerPartSet(). It didn't handle the situation correctly when
the low, high argument values are in reverse order (low > high)
with 'Val' type is i32 (a corner case).
llvm-svn: 63386
The way this worked before was to test APInt by running
"lli -force-interpreter=true" knowing the lli uses APInt under the hood to
store its values. Now, we test APInt directly.
llvm-svn: 62514
endianness of the target not of the host. Done by the
simple expedient of reversing bytes for primitive types
if the host and target endianness don't match. This is
correct for integer and pointer types. I don't know if
it is correct for floating point types.
llvm-svn: 45039
using the minimum possible number of bytes. For little
endian targets run on little endian machines, apints are
stored in memory from LSB to MSB as before. For big endian
targets on big endian machines they are stored from MSB to
LSB which wasn't always the case before (if the target and
host endianness doesn't match values are stored according
to the host's endianness). Doing this requires knowing the
endianness of the host, which is determined when configuring -
thanks go to Anton for this. Only having access to little
endian machines I was unable to properly test the big endian
part, which is also the most complicated...
llvm-svn: 44796
global variables that needed to be passed in. This makes it possible to
add new global variables with only a couple changes (Makefile and llvm-dg.exp)
instead of touching every single dg.exp file.
llvm-svn: 35918
